Chaoyi Sun
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Chaoyi Sun has a total of 42 co-authors. Here are the top co-authors by number of shared publications:
Congxin Chen
6 shared publicationsJiahao Yuan
5 shared publications- Yun Zheng
State Key Laboratory of Geomechanics and Geotechnical Engineering Safety, Institute of Rock and Soil Mechanics, Chinese Academy of Sciences, Wuhan, China
5 shared publications Yun Zheng
4 shared publicationsCaihua Liu
3 shared publications- Caihua Liu
State Key Laboratory of Geomechanics and Geotechnical Engineering Safety, Institute of Rock and Soil Mechanics, Chinese Academy of Sciences, Wuhan 430071, China
3 shared publications
Latest Publications
- 30 October 2026
- Published by Elsevier in Engineering Failure Analysis
- Vol. 200
Investigation and Validation of the Tension-Shear coupling model for fully grouted bolts under shear
- 30 October 2026
- Published by Elsevier in Engineering Failure Analysis
- Vol. 200
Investigation and Validation of the Tension-Shear coupling model for fully grouted bolts under shear
- Open Access
Large-Scale Model Tests on the Performance and Mechanism of Vertical–Inclined Pile Wall (VIPW) Structures in Excavation
With the acceleration of urbanization, deep and large foundation pit projects have become increasingly common, posing challenges for retaining structural performance. This study investigates the mechanism of the recently proposed vertical–inclined pile wall (VIPW) through physical model tests. Six sets of large-scale model tests of foundation pit excavation under 1 g gravity conditions were carried out. Among these tests, one employed the soldier pile wall (SPW) as the support system, while the remaining five adopted the VIPW. By monitoring and analyzing the distribution and variation in the vertical pile deformation, surface settlement, pile bending moment, and inclined pile top axial force during the excavation process, the action mechanism of the VIPW was revealed, and it was verified that VIPWs exhibit better support performance than SPWs. Furthermore, four key parameters, including the embedded depth, the inclination angle, the support position of the inclined piles, and the embedded depth of the vertical piles, were varied to study their influence on the deformation and force characteristics of the VIPW, providing a theoretical basis for structural optimization design. Moreover, by comparing the instability and failure characteristics of the foundation pit, it was proved that the VIPW can effectively ensure the stability of the foundation pit.
Open AccessLarge-Scale Model Tests on the Performance and Mechanism of Vertical–Inclined Pile Wall (VIPW) Structures in Excavation
With the acceleration of urbanization, deep and large foundation pit projects have become increasingly common, posing challenges for retaining structural performance. This study investigates the mechanism of the recently proposed vertical–inclined pile wall (VIPW) through physical model tests. Six sets of large-scale model tests of foundation pit excavation under 1 g gravity conditions were carried out. Among these tests, one employed the soldier pile wall (SPW) as the support system, while the remaining five adopted the VIPW. By monitoring and analyzing the distribution and variation in the vertical pile deformation, surface settlement, pile bending moment, and inclined pile top axial force during the excavation process, the action mechanism of the VIPW was revealed, and it was verified that VIPWs exhibit better support performance than SPWs. Furthermore, four key parameters, including the embedded depth, the inclination angle, the support position of the inclined piles, and the embedded depth of the vertical piles, were varied to study their influence on the deformation and force characteristics of the VIPW, providing a theoretical basis for structural optimization design. Moreover, by comparing the instability and failure characteristics of the foundation pit, it was proved that the VIPW can effectively ensure the stability of the foundation pit.
- Open Access
- 20 March 2026
- Published by MDPI AG in Preprints.org
Large-Scale Model Tests on the Performance and Mechanism of Vertical-Inclined-Piles Wall (VIPW) Structure Upon Excavation
With the acceleration of urbanization, numerous deep and large foundation pit projects have been emerging. This paper proposes a new type of support structure for deep foundation pits, namely vertical-inclined-piles wall (VIPW). Six sets of large-scale model tests of foundation pit excavation under 1-g condition were carried out, among which one set was supported by soldier pile wall (SPW) and the other five by VIPW. By monitoring and analyzing the distribution and variation characteristics of vertical pile deformation, surface settlement, pile bending moment, and inclined pile top axial force during the excavation process, the action mechanism of VIPW was revealed, and it was verified that VIPW exhibits better support performance than SPW. Furthermore, four key parameters, including the embedded depth of inclined piles, the inclination angle of inclined piles, the support position of inclined piles, and the embedded depth of vertical piles, were changed respectively to study their influences on the deformation and force characteristics of VIPW, providing a theoretical basis for structural optimization design. Moreover, by comparing the instability and failure characteristics of the foundation pit, it is proved that VIPW can effectively ensure the stability of the foundation pit.
- 20 March 2026
- Published by MDPI AG in Preprints.org
Open AccessLarge-Scale Model Tests on the Performance and Mechanism of Vertical-Inclined-Piles Wall (VIPW) Structure Upon Excavation
With the acceleration of urbanization, numerous deep and large foundation pit projects have been emerging. This paper proposes a new type of support structure for deep foundation pits, namely vertical-inclined-piles wall (VIPW). Six sets of large-scale model tests of foundation pit excavation under 1-g condition were carried out, among which one set was supported by soldier pile wall (SPW) and the other five by VIPW. By monitoring and analyzing the distribution and variation characteristics of vertical pile deformation, surface settlement, pile bending moment, and inclined pile top axial force during the excavation process, the action mechanism of VIPW was revealed, and it was verified that VIPW exhibits better support performance than SPW. Furthermore, four key parameters, including the embedded depth of inclined piles, the inclination angle of inclined piles, the support position of inclined piles, and the embedded depth of vertical piles, were changed respectively to study their influences on the deformation and force characteristics of VIPW, providing a theoretical basis for structural optimization design. Moreover, by comparing the instability and failure characteristics of the foundation pit, it is proved that VIPW can effectively ensure the stability of the foundation pit.
- Open Access
- 19 December 2025
- Published by MDPI AG in Applied Sciences
- Vol. 16 (1) , 22
Stability Analysis Approach to Block Toppling in Rock Slopes Under Seismic Loads
Rock slope toppling failure is a typical type of slope disaster. It is crucial for engineering practice to quickly and accurately evaluate the toppling stability of rock slopes under seismic loads. Based on Liu’s pseudo-continuous medium method, the geomechanical model for evaluating the stability of rock slope block toppling subjected to seismic loads, considering non-orthogonal characteristics of the structural planes, is established, and the analytical solution for toppling failure is proposed. The relationship between the normal and shear stresses acting at the block base is discussed, and the formula for determining the location of the failure mode transition point in different cases is deduced. Through programmed analysis, the impact of the seismic load on slope stability and the influence of key parameters on the critical seismic influence coefficient are systematically investigated. The research results indicate that the seismic load has a significant impact on slope stability. With increases in the seismic influence coefficient, or decreases in the angle between the seismic load and the horizontal plane, the supporting force required for slope stability increases, and the transition point from toppling to sliding moves towards the slope toe. It is also shown that, when the seismic influence coefficient reaches the critical value, the slope will slide as a whole without toppling. The value of the critical seismic influence coefficient is positively correlated with the internal friction angle of the block base, and negatively correlated with the direction of the seismic load, the internal friction angle of the block side and the dip angle of the block base. This study provides theoretical support for evaluating the block toppling stability of slopes in seismic-prone areas.
- 19 December 2025
- Published by MDPI AG in Applied Sciences
- Vol. 16 (1) , 22
Open AccessStability Analysis Approach to Block Toppling in Rock Slopes Under Seismic Loads
Rock slope toppling failure is a typical type of slope disaster. It is crucial for engineering practice to quickly and accurately evaluate the toppling stability of rock slopes under seismic loads. Based on Liu’s pseudo-continuous medium method, the geomechanical model for evaluating the stability of rock slope block toppling subjected to seismic loads, considering non-orthogonal characteristics of the structural planes, is established, and the analytical solution for toppling failure is proposed. The relationship between the normal and shear stresses acting at the block base is discussed, and the formula for determining the location of the failure mode transition point in different cases is deduced. Through programmed analysis, the impact of the seismic load on slope stability and the influence of key parameters on the critical seismic influence coefficient are systematically investigated. The research results indicate that the seismic load has a significant impact on slope stability. With increases in the seismic influence coefficient, or decreases in the angle between the seismic load and the horizontal plane, the supporting force required for slope stability increases, and the transition point from toppling to sliding moves towards the slope toe. It is also shown that, when the seismic influence coefficient reaches the critical value, the slope will slide as a whole without toppling. The value of the critical seismic influence coefficient is positively correlated with the internal friction angle of the block base, and negatively correlated with the direction of the seismic load, the internal friction angle of the block side and the dip angle of the block base. This study provides theoretical support for evaluating the block toppling stability of slopes in seismic-prone areas.
- 25 November 2025
- Published by Elsevier in Engineering Analysis with Boundary Elements
- Vol. 182
Dynamic response analysis of concealed bedding rock slopes using discrete element method
- 25 November 2025
- Published by Elsevier in Engineering Analysis with Boundary Elements
- Vol. 182
Dynamic response analysis of concealed bedding rock slopes using discrete element method
- 1 October 2025
- Published by American Society of Civil Engineers (ASCE) in International Journal of Geomechanics
- Vol. 25 (10)
Analytical Study on the Actual Mechanical Behavior of Fully Grouted Bolts in Jointed Rock Masses
- 1 October 2025
- Published by American Society of Civil Engineers (ASCE) in International Journal of Geomechanics
- Vol. 25 (10)
Analytical Study on the Actual Mechanical Behavior of Fully Grouted Bolts in Jointed Rock Masses
- 3 September 2025
- Published by Springer Nature in Bulletin of Engineering Geology and the Environment
- Vol. 84 (10) , 1-29
Deformation behaviors and failure mechanisms of fully grouted bolts in jointed rock masses under coupled tension and shear
- 3 September 2025
- Published by Springer Nature in Bulletin of Engineering Geology and the Environment
- Vol. 84 (10) , 1-29
Deformation behaviors and failure mechanisms of fully grouted bolts in jointed rock masses under coupled tension and shear
- Open Access
- 1 August 2025
- Published by China Science Publishing & Media Ltd. in Chinese Journal of Rock Mechanics and Engineering
- Vol. 44 (8) , 2101-2111
地震作用下隐伏顺层岩质边坡稳定性上限分析
Earthquakes play a critical role in the catastrophic destabilization of concealed bedding rock slopes (CBRSs). However, established methods for assessing the stability of these slopes under seismic conditions are lacking. This study proposes a method for determining the pseudo-static coefficient by analyzing extensive results from shaking table model tests of CBRSs, which accounts for the peak acceleration amplification effect with elevation. Based on the shattering-sliding failure mechanisms of CBRSs under seismic loading, a double-slip model along with its kinematically admissible velocity field is developed. Utilizing the upper bound theorem of limit analysis, a stability analysis method for CBRSs subjected to seismic conditions is presented. Additionally, a comparative analysis of slope stability is conducted through two case studies, further validating the proposed method. The findings indicate that under seismic action, these slopes are particularly vulnerable to catastrophic sliding failure, exhibiting nonlinear and segmented characteristics in both the peak acceleration amplification effect and the surface amplification effect. As the amplitudes of horizontal and vertical seismic waves increase, the stability coefficient of the CBRSs decreases linearly, accompanied by a slight reduction in the thickness of the potential sliding mass. Notably, the stability coefficient exhibits a more significant decrease when accounting for the dynamic elevation amplification effect of seismic acceleration. Furthermore, the stability coefficient of CBRSs decreases as a power function in relation to increasing slope angle and height, while the thickness of the potential sliding mass decreases with an increasing slope angle but increases with rising slope height and structural plane strength. A comparative analysis between the proposed method and two case studies from the literature reveals strong agreement in the calculated results, thereby validating the accuracy and reliability of the method. These findings provide valuable insights for the stability evaluation and treatment design of CBRSs under seismic conditions.
- 1 August 2025
- Published by China Science Publishing & Media Ltd. in Chinese Journal of Rock Mechanics and Engineering
- Vol. 44 (8) , 2101-2111
Open Access地震作用下隐伏顺层岩质边坡稳定性上限分析
Earthquakes play a critical role in the catastrophic destabilization of concealed bedding rock slopes (CBRSs). However, established methods for assessing the stability of these slopes under seismic conditions are lacking. This study proposes a method for determining the pseudo-static coefficient by analyzing extensive results from shaking table model tests of CBRSs, which accounts for the peak acceleration amplification effect with elevation. Based on the shattering-sliding failure mechanisms of CBRSs under seismic loading, a double-slip model along with its kinematically admissible velocity field is developed. Utilizing the upper bound theorem of limit analysis, a stability analysis method for CBRSs subjected to seismic conditions is presented. Additionally, a comparative analysis of slope stability is conducted through two case studies, further validating the proposed method. The findings indicate that under seismic action, these slopes are particularly vulnerable to catastrophic sliding failure, exhibiting nonlinear and segmented characteristics in both the peak acceleration amplification effect and the surface amplification effect. As the amplitudes of horizontal and vertical seismic waves increase, the stability coefficient of the CBRSs decreases linearly, accompanied by a slight reduction in the thickness of the potential sliding mass. Notably, the stability coefficient exhibits a more significant decrease when accounting for the dynamic elevation amplification effect of seismic acceleration. Furthermore, the stability coefficient of CBRSs decreases as a power function in relation to increasing slope angle and height, while the thickness of the potential sliding mass decreases with an increasing slope angle but increases with rising slope height and structural plane strength. A comparative analysis between the proposed method and two case studies from the literature reveals strong agreement in the calculated results, thereby validating the accuracy and reliability of the method. These findings provide valuable insights for the stability evaluation and treatment design of CBRSs under seismic conditions.
- 4 March 2025
- Published by Springer Nature in Rock Mechanics and Rock Engineering
- Vol. 58 (6) , 6059-6086
Equivalent Nodal Intensity-Based Contact Model for 3D Finite–Discrete Element Method in Rock Fracturing Analysis
- 4 March 2025
- Published by Springer Nature in Rock Mechanics and Rock Engineering
- Vol. 58 (6) , 6059-6086
Equivalent Nodal Intensity-Based Contact Model for 3D Finite–Discrete Element Method in Rock Fracturing Analysis