JSJiaxing Song
Jiaxing Song
*This is an algorithmically generated author record based on publicly available information.
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jiaxing Song has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Bamin Khomami
University of Tennessee
8 shared publications - Nan-Sheng Liu
University of Science and Technology of China
8 shared publications - Olga Shishkina
Max Planck Institute for Dynamics and Self-Organization
8 shared publications - Xi-Yun Lu
University of Science and Technology of China
7 shared publications - Fenghui Lin
University of Science and Technology of China
5 shared publications - Xiaojue Zhu
Max Planck Institute for Solar System Research
5 shared publications
Latest Publications
- Open Access
- 21 May 2026
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1035
On multiple stable states in Taylor–Couette flow with realistic end-wall boundary conditions
We investigate Taylor–Couette flow with realistic no-slip boundary conditions at all surfaces through direct numerical simulation (DNS) and theoretical analysis. Imposing physically consistent end-wall conditions at the top and bottom lids significantly alters the flow dynamics compared with that for periodic boundary conditions. We extend the classical angular-momentum-flux framework to account for axial transport, thereby extending the Eckhardt–Grossmann–Lohse model (Eckhardt et al. J. Fluid Mech . vol. 581, 2007, pp. 221–250) to no-slip boundary conditions. A systematic exploration of the parameter space $(\textit{Re}, n)$ uncovers multiple long-lived states with different roll number $n$ configurations at identical Reynolds numbers $\textit{Re}$ , giving rise to pronounced hysteresis loops occurring under realistic boundary conditions. Our DNS for no-slip axial endcaps reveals a sequence of structural transitions: as the inner-cylinder Reynolds number increases, the flow evolves from Taylor vortex flow through chaotic wavy vortex flow and turbulent wavy vortex flow to an axisymmetric turbulent Taylor vortex flow. Using modal energy budgets, we identify transition mechanisms and quantify how the accessible phase-space volume and associated roll-specific angular momentum flux depend on control parameters and the specific flow state. Our findings demonstrate the impact of realistic boundary conditions on the dynamics in Taylor–Couette flow and how they change the stability landscape of multiple states. The coexistence of distinct flow patterns and their stability analysis offers promising insights into transition dynamics between laminar and turbulent regimes in closed sheared flows.- 21 May 2026
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1035
Open AccessOn multiple stable states in Taylor–Couette flow with realistic end-wall boundary conditions
We investigate Taylor–Couette flow with realistic no-slip boundary conditions at all surfaces through direct numerical simulation (DNS) and theoretical analysis. Imposing physically consistent end-wall conditions at the top and bottom lids significantly alters the flow dynamics compared with that for periodic boundary conditions. We extend the classical angular-momentum-flux framework to account for axial transport, thereby extending the Eckhardt–Grossmann–Lohse model (Eckhardt et al. J. Fluid Mech . vol. 581, 2007, pp. 221–250) to no-slip boundary conditions. A systematic exploration of the parameter space $(\textit{Re}, n)$ uncovers multiple long-lived states with different roll number $n$ configurations at identical Reynolds numbers $\textit{Re}$ , giving rise to pronounced hysteresis loops occurring under realistic boundary conditions. Our DNS for no-slip axial endcaps reveals a sequence of structural transitions: as the inner-cylinder Reynolds number increases, the flow evolves from Taylor vortex flow through chaotic wavy vortex flow and turbulent wavy vortex flow to an axisymmetric turbulent Taylor vortex flow. Using modal energy budgets, we identify transition mechanisms and quantify how the accessible phase-space volume and associated roll-specific angular momentum flux depend on control parameters and the specific flow state. Our findings demonstrate the impact of realistic boundary conditions on the dynamics in Taylor–Couette flow and how they change the stability landscape of multiple states. The coexistence of distinct flow patterns and their stability analysis offers promising insights into transition dynamics between laminar and turbulent regimes in closed sheared flows. - Open Access
- 9 March 2026
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1030, R4
Multiple states in centrifugal convection
We systematically investigate the multiplicity of flow states in centrifugal convection in water at about $40\,^\circ$ C with Prandtl number $Pr = 4.3$ in a vertically aligned annulus in which the inner radius, the gap between the cylinders and the height all coincide (6 cm). This leaves two independent control parameters: the thermal driving, quantified by the Rayleigh number ${\textit{Ra}}$ , and the rotation strength, expressed by the Froude number ${\textit{Fr}}$ . We explore the range $2\times 10^{5} \le {{\textit{Ra}}} \le 10^{7}$ for ${{\textit{Fr}}} = 10$ and $100$ with direct numerical simulations (DNS). The states are characterised by the number of convection rolls in the mid-height cross-section. We show that the final state sensitively depends on the initial condition, leading to pronounced multistability and substantial variations in heat and momentum transport, while the range of attainable states is strongly restricted. We derive a theoretical estimate of the admissible roll numbers based on the Poincaré–Friedrichs inequality and demonstrate quantitative agreement with the DNS. We further show that, for larger ${\textit{Ra}}$ , the range of possible states shrinks systematically due to an elliptical instability, providing a predictive framework for the selection and disappearance of coherent roll states in centrifugal convection.- 9 March 2026
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1030, R4
Open AccessMultiple states in centrifugal convection
We systematically investigate the multiplicity of flow states in centrifugal convection in water at about $40\,^\circ$ C with Prandtl number $Pr = 4.3$ in a vertically aligned annulus in which the inner radius, the gap between the cylinders and the height all coincide (6 cm). This leaves two independent control parameters: the thermal driving, quantified by the Rayleigh number ${\textit{Ra}}$ , and the rotation strength, expressed by the Froude number ${\textit{Fr}}$ . We explore the range $2\times 10^{5} \le {{\textit{Ra}}} \le 10^{7}$ for ${{\textit{Fr}}} = 10$ and $100$ with direct numerical simulations (DNS). The states are characterised by the number of convection rolls in the mid-height cross-section. We show that the final state sensitively depends on the initial condition, leading to pronounced multistability and substantial variations in heat and momentum transport, while the range of attainable states is strongly restricted. We derive a theoretical estimate of the admissible roll numbers based on the Poincaré–Friedrichs inequality and demonstrate quantitative agreement with the DNS. We further show that, for larger ${\textit{Ra}}$ , the range of possible states shrinks systematically due to an elliptical instability, providing a predictive framework for the selection and disappearance of coherent roll states in centrifugal convection. - Open Access
- 25 July 2025
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1016, A3
Beyond Nusselt number: assessing Reynolds and length scalings in rotating convection under stress-free boundary conditions
Convection in planetary environments is often modelled using stress-free boundary conditions, with diffusion-free geostrophic turbulence scalings frequently assumed. However, key questions remain about whether rotating convection with stress-free boundary conditions truly achieves the diffusion-free geostrophic turbulence regime. Here, we investigated the scaling behaviours of the Nusselt number ( $Nu$ ), Reynolds number ( ${Re}$ ) and dimensionless convective length scale ( $\ell /H$ , where $H$ is the height of the domain) in rotating Rayleigh–Bénard convection under stress-free boundary conditions within a Boussinesq framework. Using direct numerical simulation data for Ekman number $Ek$ down to $5\times 10^{-8}$ , Rayleigh number $Ra$ up to $5\times 10^{12}$ , and Prandtl number $Pr = 1$ , we show that the diffusion-free scaling of the heat transfer $Nu - 1 \sim Ra^{3/2}\, Pr^{-1/2}\, Ek^2$ alone does not necessarily imply that the flow is in a geostrophic turbulence regime. Under the stress-free conditions, ${Re}$ and $\ell /H$ deviate from the diffusion-free scalings, indicating a dependence on molecular diffusivity. We propose new non-diffusion-free scaling relations for this diffusion-free heat transfer regime with stress-free boundary conditions: $\ell /H \sim Ra^{1/8}\, Pr^{-1/8}\, Ek^{1/2}$ and ${Re} \sim Ra^{11/8}\, Pr^{-11/8}\, Ek^{3/2}$ . Our findings highlight the need to assess both thermal and dynamic characteristics to confirm geostrophic turbulence.- 25 July 2025
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1016, A3
Open AccessBeyond Nusselt number: assessing Reynolds and length scalings in rotating convection under stress-free boundary conditions
Convection in planetary environments is often modelled using stress-free boundary conditions, with diffusion-free geostrophic turbulence scalings frequently assumed. However, key questions remain about whether rotating convection with stress-free boundary conditions truly achieves the diffusion-free geostrophic turbulence regime. Here, we investigated the scaling behaviours of the Nusselt number ( $Nu$ ), Reynolds number ( ${Re}$ ) and dimensionless convective length scale ( $\ell /H$ , where $H$ is the height of the domain) in rotating Rayleigh–Bénard convection under stress-free boundary conditions within a Boussinesq framework. Using direct numerical simulation data for Ekman number $Ek$ down to $5\times 10^{-8}$ , Rayleigh number $Ra$ up to $5\times 10^{12}$ , and Prandtl number $Pr = 1$ , we show that the diffusion-free scaling of the heat transfer $Nu - 1 \sim Ra^{3/2}\, Pr^{-1/2}\, Ek^2$ alone does not necessarily imply that the flow is in a geostrophic turbulence regime. Under the stress-free conditions, ${Re}$ and $\ell /H$ deviate from the diffusion-free scalings, indicating a dependence on molecular diffusivity. We propose new non-diffusion-free scaling relations for this diffusion-free heat transfer regime with stress-free boundary conditions: $\ell /H \sim Ra^{1/8}\, Pr^{-1/8}\, Ek^{1/2}$ and ${Re} \sim Ra^{11/8}\, Pr^{-11/8}\, Ek^{3/2}$ . Our findings highlight the need to assess both thermal and dynamic characteristics to confirm geostrophic turbulence. - Open Access
- 7 July 2025
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1014, A22
Direct numerical simulations of turbulent Rayleigh–Bénard convection with polymer additives
We present results of three-dimensional direct numerical simulations of turbulent Rayleigh–Bénard convection of dilute polymeric solutions for Rayleigh number ( $Ra$ ) ranging from $10^6$ to $ 10^{10}$ , and Prandtl number $Pr=4.3$ . The viscoelastic flow is simulated by solving the incompressible Navier–Stokes equations under the Boussinesq approximation coupled with the finitely extensible nonlinear elastic Peterlin constitutive model. The Weissenberg number ( $Wi$ ) is either $Wi=5$ or $Wi=10$ , with the maximum chain extensibility parameter $L=50$ , corresponding to moderate fluid elasticity. Our results demonstrate that both heat transport and momentum transport are reduced by the presence of polymer additives in the studied parameter range. Remarkably, the specific parameters used in the current numerical study give similar heat transfer reduction values as observed in experiments. We demonstrate that polymers have different effects in different regions of the flow. The presence of polymers stabilises the boundary layer, which is found to be the primary cause of the overall heat transfer reduction. In the bulk region, the presence of polymers slows down the flow by increasing the effective viscosity, enhances the coherency of thermal plumes, and suppresses the small-scale turbulent fluctuations. For small $Ra$ , the heat transfer reduction in the bulk region is associated with plume velocity reduction, while for larger $Ra$ , it is caused by the competing effects of suppressed turbulent fluctuations and enhanced plume coherency.- 7 July 2025
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1014, A22
Open AccessDirect numerical simulations of turbulent Rayleigh–Bénard convection with polymer additives
We present results of three-dimensional direct numerical simulations of turbulent Rayleigh–Bénard convection of dilute polymeric solutions for Rayleigh number ( $Ra$ ) ranging from $10^6$ to $ 10^{10}$ , and Prandtl number $Pr=4.3$ . The viscoelastic flow is simulated by solving the incompressible Navier–Stokes equations under the Boussinesq approximation coupled with the finitely extensible nonlinear elastic Peterlin constitutive model. The Weissenberg number ( $Wi$ ) is either $Wi=5$ or $Wi=10$ , with the maximum chain extensibility parameter $L=50$ , corresponding to moderate fluid elasticity. Our results demonstrate that both heat transport and momentum transport are reduced by the presence of polymer additives in the studied parameter range. Remarkably, the specific parameters used in the current numerical study give similar heat transfer reduction values as observed in experiments. We demonstrate that polymers have different effects in different regions of the flow. The presence of polymers stabilises the boundary layer, which is found to be the primary cause of the overall heat transfer reduction. In the bulk region, the presence of polymers slows down the flow by increasing the effective viscosity, enhances the coherency of thermal plumes, and suppresses the small-scale turbulent fluctuations. For small $Ra$ , the heat transfer reduction in the bulk region is associated with plume velocity reduction, while for larger $Ra$ , it is caused by the competing effects of suppressed turbulent fluctuations and enhanced plume coherency. - 15 April 2025
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1009, A24
Asymptotic drag reduction states in turbulent Taylor vortex flow of dilute polymeric solutions: interplay between large-scale structures and polymer chains dynamics
Direct numerical simulations in a low-curvature viscoelastic turbulent Taylor vortex flow, with Reynolds numbers ranging from 1500 to 8000 and maximum chain extensibility ( $L$ ) from 50 to 200, reveal a maximum drag reduction (MDR) asymptote. Compared with the classical MDR observed in planar wall-bounded shear flows, that is, drag reduction (DR) is $\sim -80\, \%$ , this MDR state achieves only moderate levels of DR ( $\sim -60\,\%$ ). This is due to the existence of large-scale structures (LSSs). A careful examination of the flow structures reveals that the polymer–turbulence interaction suppresses small-scale vortices and stabilizes the LSSs. These structural changes in turn lead to a reduction of Reynolds stress, and consequently to a DR flow state. Although Reynolds stress does not vanish as observed in classical MDR states, the small-scale vortices that heavily populate the near-wall region are also almost completely eliminated in this flow state. Concurrently, significant polymer stresses develop as a consequence of the interaction between polymer chains and LSSs that partially offset the magnitude of DR, leading to MDR asymptotes with moderate levels of DR. Moreover, we demonstrate that polymer deformation, i.e. deviation from the equilibrium state, is directly correlated with the LSSs dynamics, while the polymer deformation fluctuation displays a universal property in the MDR state. Hence, it is not surprising that the extent of DR exhibits a non-monotonic dependence on the maximum chain extensibility. Specifically, the variation in $L$ alters the incoherent and coherent angular momentum transport by small- and large-scale flow structures, respectively. To that end, the most DR flow state occurs at a moderate value $L=100$ . Overall, this study further supports the universal property of polymer-induced asymptotic states in wall-bounded turbulence and paves the way for mechanistic understanding of drag modification that arises from the interaction of polymers with small- and large-scale flow structures.- 15 April 2025
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1009, A24
Asymptotic drag reduction states in turbulent Taylor vortex flow of dilute polymeric solutions: interplay between large-scale structures and polymer chains dynamics
Direct numerical simulations in a low-curvature viscoelastic turbulent Taylor vortex flow, with Reynolds numbers ranging from 1500 to 8000 and maximum chain extensibility ( $L$ ) from 50 to 200, reveal a maximum drag reduction (MDR) asymptote. Compared with the classical MDR observed in planar wall-bounded shear flows, that is, drag reduction (DR) is $\sim -80\, \%$ , this MDR state achieves only moderate levels of DR ( $\sim -60\,\%$ ). This is due to the existence of large-scale structures (LSSs). A careful examination of the flow structures reveals that the polymer–turbulence interaction suppresses small-scale vortices and stabilizes the LSSs. These structural changes in turn lead to a reduction of Reynolds stress, and consequently to a DR flow state. Although Reynolds stress does not vanish as observed in classical MDR states, the small-scale vortices that heavily populate the near-wall region are also almost completely eliminated in this flow state. Concurrently, significant polymer stresses develop as a consequence of the interaction between polymer chains and LSSs that partially offset the magnitude of DR, leading to MDR asymptotes with moderate levels of DR. Moreover, we demonstrate that polymer deformation, i.e. deviation from the equilibrium state, is directly correlated with the LSSs dynamics, while the polymer deformation fluctuation displays a universal property in the MDR state. Hence, it is not surprising that the extent of DR exhibits a non-monotonic dependence on the maximum chain extensibility. Specifically, the variation in $L$ alters the incoherent and coherent angular momentum transport by small- and large-scale flow structures, respectively. To that end, the most DR flow state occurs at a moderate value $L=100$ . Overall, this study further supports the universal property of polymer-induced asymptotic states in wall-bounded turbulence and paves the way for mechanistic understanding of drag modification that arises from the interaction of polymers with small- and large-scale flow structures.- Open Access
- 15 January 2025
- Published by Elsevier in Journal of Computational Physics
- Vol. 525
A finite difference method for turbulent thermal convection of complex fluids
- 15 January 2025
- Published by Elsevier in Journal of Computational Physics
- Vol. 525
Open AccessA finite difference method for turbulent thermal convection of complex fluids
- Open Access
- 27 November 2024
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1000, R3
Keplerian turbulence in Taylor–Couette flow of dilute polymeric solutions
Turbulent flow induced by elastorotational instability in viscoelastic Taylor–Couette flow (TCF) with Keplerian rotation is analogous to a turbulent accretion disk destabilized by magnetorotational instability. We examine this novel viscoelastic Keplerian turbulence via direct numerical simulations (DNS) for the shear Reynolds number ( $Re$ ) ranging from $10^2$ to $10^4$ . The observed characteristic flow structure consists of penetrating streamwise vortices with axial length scales much smaller than the gap width, distinct from the classic centrifugally induced Taylor vortices, which have axial lengths of the gap width. These intriguing vortices persist for the wide $Re$ range considered and give rise to intriguing scaling behaviour in key flow quantities. Specifically, the characteristic axial length of the penetrating vortices is shown to scale as $Re^{-0.22}$ ; the angular momentum transport scales as $Re^{0.42}$ ; the kinetic and elastic boundary-layer thicknesses based on angular velocity and hoop stress near the inner cylinder wall scale as $Re^{-0.48}$ and $Re^{-0.49}$ , respectively. This implies that the viscoelastic Keplerian turbulence belongs to the classical turbulent regime of TCF with the Prandtl–Blasius-type boundary layer. Furthermore, we present an analytical relation between the viscous and elastic dissipation rates of kinetic energy and the angular momentum transport and in turn demonstrate its validity using our DNS data. This study has paved the way for future research to explore astrophysics-related Keplerian turbulence and angular momentum transport via the scaling relations of the analogous TCF of dilute polymeric solutions.- 27 November 2024
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1000, R3
Open AccessKeplerian turbulence in Taylor–Couette flow of dilute polymeric solutions
Turbulent flow induced by elastorotational instability in viscoelastic Taylor–Couette flow (TCF) with Keplerian rotation is analogous to a turbulent accretion disk destabilized by magnetorotational instability. We examine this novel viscoelastic Keplerian turbulence via direct numerical simulations (DNS) for the shear Reynolds number ( $Re$ ) ranging from $10^2$ to $10^4$ . The observed characteristic flow structure consists of penetrating streamwise vortices with axial length scales much smaller than the gap width, distinct from the classic centrifugally induced Taylor vortices, which have axial lengths of the gap width. These intriguing vortices persist for the wide $Re$ range considered and give rise to intriguing scaling behaviour in key flow quantities. Specifically, the characteristic axial length of the penetrating vortices is shown to scale as $Re^{-0.22}$ ; the angular momentum transport scales as $Re^{0.42}$ ; the kinetic and elastic boundary-layer thicknesses based on angular velocity and hoop stress near the inner cylinder wall scale as $Re^{-0.48}$ and $Re^{-0.49}$ , respectively. This implies that the viscoelastic Keplerian turbulence belongs to the classical turbulent regime of TCF with the Prandtl–Blasius-type boundary layer. Furthermore, we present an analytical relation between the viscous and elastic dissipation rates of kinetic energy and the angular momentum transport and in turn demonstrate its validity using our DNS data. This study has paved the way for future research to explore astrophysics-related Keplerian turbulence and angular momentum transport via the scaling relations of the analogous TCF of dilute polymeric solutions. - Open Access
- 26 November 2024
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1000
Turbulent spherical Rayleigh–Bénard convection: radius ratio dependence
Direct numerical simulation (DNS) is performed to explore turbulent Rayleigh–Bénard convection in spherical shells. Our simulations cover six distinct values of radius ratio, $\eta = r_i/r_o = 0.2$ , 0.3, 0.4, 0.5, 0.6 and 0.8, under the assumption of a centrally condensed mass with gravity profile $g \sim 1/r^{2}$ ; where $r_i$ , $r_o$ and $r$ denote the inner shell radius, the outer shell radius and the local radial coordinate, respectively. The Prandtl number is kept constant at unity while the Rayleigh number ( $Ra$ ) is varied from $3 \times 10^{3}$ to $5 \times 10^8$ . Our primary aim is to analyze how the radius ratio influences the global transport properties and flow physics. To gain insights into the scaling behaviour of the Nusselt number ( $Nu$ ) and the Reynolds number ( $Re$ ) with respect to $Ra$ and $\eta$ , we apply the Grossmann–Lohse (GL) theory (Grossmann & Lohse, J. Fluid Mech., vol. 407, 2000, pp. 27–56) to the system. It is observed that the scaling exponents for $Nu$ and $Re$ in relation to $Ra$ are more significant for smaller $\eta$ values, suggesting that the simulations with smaller $\eta$ reach the classical $Nu\sim Ra^{1/3}$ regime at a relatively lower $Ra$ . This observation could also imply the systems with smaller $\eta$ might transition to the ultimate regime earlier at a smaller $Ra$ . Based on our extensive DNS data, we establish that the thickness of the inner thermal boundary, $\lambda _{\vartheta }^{i}$ , follows a scaling relationship of $\lambda _{\vartheta }^{i} \sim \eta ^{1/2}$ . This relationship, in turn, leads to a scaling law for $Nu$ in the form of $Nu \sim f(\eta ) Ra^{\gamma }$ , where the function $f(\eta )$ is defined as $f(\eta ) = {\eta ^{1/2}}/{(1+\eta ^{4/3})}$ , and the exponent $\gamma$ depends on both $Ra$ and $\eta$ . Additionally, we characterize and explain the asymmetry in the velocity field by introducing the separate Reynolds numbers for the inner and outer shells. The asymmetry of the kinetic and thermal energy dissipation rates in the inner and outer boundary layers (BLs) is also quantified.- 26 November 2024
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1000
Open AccessTurbulent spherical Rayleigh–Bénard convection: radius ratio dependence
Direct numerical simulation (DNS) is performed to explore turbulent Rayleigh–Bénard convection in spherical shells. Our simulations cover six distinct values of radius ratio, $\eta = r_i/r_o = 0.2$ , 0.3, 0.4, 0.5, 0.6 and 0.8, under the assumption of a centrally condensed mass with gravity profile $g \sim 1/r^{2}$ ; where $r_i$ , $r_o$ and $r$ denote the inner shell radius, the outer shell radius and the local radial coordinate, respectively. The Prandtl number is kept constant at unity while the Rayleigh number ( $Ra$ ) is varied from $3 \times 10^{3}$ to $5 \times 10^8$ . Our primary aim is to analyze how the radius ratio influences the global transport properties and flow physics. To gain insights into the scaling behaviour of the Nusselt number ( $Nu$ ) and the Reynolds number ( $Re$ ) with respect to $Ra$ and $\eta$ , we apply the Grossmann–Lohse (GL) theory (Grossmann & Lohse, J. Fluid Mech., vol. 407, 2000, pp. 27–56) to the system. It is observed that the scaling exponents for $Nu$ and $Re$ in relation to $Ra$ are more significant for smaller $\eta$ values, suggesting that the simulations with smaller $\eta$ reach the classical $Nu\sim Ra^{1/3}$ regime at a relatively lower $Ra$ . This observation could also imply the systems with smaller $\eta$ might transition to the ultimate regime earlier at a smaller $Ra$ . Based on our extensive DNS data, we establish that the thickness of the inner thermal boundary, $\lambda _{\vartheta }^{i}$ , follows a scaling relationship of $\lambda _{\vartheta }^{i} \sim \eta ^{1/2}$ . This relationship, in turn, leads to a scaling law for $Nu$ in the form of $Nu \sim f(\eta ) Ra^{\gamma }$ , where the function $f(\eta )$ is defined as $f(\eta ) = {\eta ^{1/2}}/{(1+\eta ^{4/3})}$ , and the exponent $\gamma$ depends on both $Ra$ and $\eta$ . Additionally, we characterize and explain the asymmetry in the velocity field by introducing the separate Reynolds numbers for the inner and outer shells. The asymmetry of the kinetic and thermal energy dissipation rates in the inner and outer boundary layers (BLs) is also quantified. - Open Access
- 29 July 2024
- Published by Elsevier in International Journal of Heat and Mass Transfer
- Vol. 232
Direct numerical simulations of the transition between rotation- to buoyancy-dominated regimes in rotating Rayleigh–Bénard convection
- 29 July 2024
- Published by Elsevier in International Journal of Heat and Mass Transfer
- Vol. 232
Open AccessDirect numerical simulations of the transition between rotation- to buoyancy-dominated regimes in rotating Rayleigh–Bénard convection
- Open Access
- 25 June 2024
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 989, A3
Direct numerical simulations of rapidly rotating Rayleigh–Bénard convection with Rayleigh number up to
Three-dimensional direct numerical simulations of rotating Rayleigh–Bénard convection in the planar geometry with no-slip top and bottom and periodic lateral boundary conditions are performed for a broad parameter range with the Rayleigh number spanning in $5\times 10^{6}\leq Ra \leq 5\times 10^{13}$ , Ekman number within $5\times 10^{-9}\leq Ek \leq 5\times 10^{-5}$ and Prandtl number $Pr=1$ . The thermal and Ekman boundary layer (BL) statistics, temperature drop within the thermal BL, interior temperature gradient and scaling behaviours of the heat and momentum transports (reflected in the Nusselt $Nu$ and Reynolds numbers $Re$ ) as well as the convective length scale are investigated across various flow regimes. The global and local momentum transports are examined via the $Re$ scaling derived from the classical theoretical balances of viscous–Archimedean–Coriolis (VAC) and Coriolis–inertial–Archimedean (CIA) forces. The VAC-based $Re$ scaling is shown to agree well with the data in the cellular and columnar regimes, where the characteristic convective length scales as the onset length scale ${\sim } Ek^{1/3}$ , while the CIA-based $Re$ scaling and the inertia length scale $\sim (ReEk)^{1/2}$ work well in the geostrophic turbulence regime for $Ek\leq 1.5\times 10^{-8}$ . The examinations of $Nu$ , global and local $Re$ , and convective length scale as well as the temperature drop within the thermal BL and its thickness scaling behaviours, indicate that for extreme parameters of $Ek\leq 1.5\times 10^{-8}$ and $80\lesssim RaEk^{4/3}\lesssim 200$ , we have reached the diffusion-free geostrophic turbulence regime.- 25 June 2024
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 989, A3
Open AccessDirect numerical simulations of rapidly rotating Rayleigh–Bénard convection with Rayleigh number up to
Three-dimensional direct numerical simulations of rotating Rayleigh–Bénard convection in the planar geometry with no-slip top and bottom and periodic lateral boundary conditions are performed for a broad parameter range with the Rayleigh number spanning in $5\times 10^{6}\leq Ra \leq 5\times 10^{13}$ , Ekman number within $5\times 10^{-9}\leq Ek \leq 5\times 10^{-5}$ and Prandtl number $Pr=1$ . The thermal and Ekman boundary layer (BL) statistics, temperature drop within the thermal BL, interior temperature gradient and scaling behaviours of the heat and momentum transports (reflected in the Nusselt $Nu$ and Reynolds numbers $Re$ ) as well as the convective length scale are investigated across various flow regimes. The global and local momentum transports are examined via the $Re$ scaling derived from the classical theoretical balances of viscous–Archimedean–Coriolis (VAC) and Coriolis–inertial–Archimedean (CIA) forces. The VAC-based $Re$ scaling is shown to agree well with the data in the cellular and columnar regimes, where the characteristic convective length scales as the onset length scale ${\sim } Ek^{1/3}$ , while the CIA-based $Re$ scaling and the inertia length scale $\sim (ReEk)^{1/2}$ work well in the geostrophic turbulence regime for $Ek\leq 1.5\times 10^{-8}$ . The examinations of $Nu$ , global and local $Re$ , and convective length scale as well as the temperature drop within the thermal BL and its thickness scaling behaviours, indicate that for extreme parameters of $Ek\leq 1.5\times 10^{-8}$ and $80\lesssim RaEk^{4/3}\lesssim 200$ , we have reached the diffusion-free geostrophic turbulence regime.