Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Haitao Yan has a total of 67 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Ultrawideband chaotic laser with effective time-delay-signature suppression based on dual-pump power regulation

    by Zhanwu Xie, Haitao Yan, Pengfei Li, Daofu Han

    We propose and experimentally demonstrate a dual-pump-power-regulated chaotic laser system for bandwidth broadening and effective time-delay-signature (TDS) suppression. The system consists of two pump lasers, two erbium-doped fibers, a phase-shifted fiber Bragg grating, and a long single-mode fiber, forming a self-feedback double-loop resonant configuration. Theoretical analysis and experimental results reveal the dynamic mechanism underlying chaotic generation and bandwidth broadening. The effects of pump power variation on chaotic bandwidth and TDS are systematically investigated. By jointly regulating the two pump powers, the directly measured electrical bandwidth reaches 35.8 GHz within the ESA measurement range, accompanied by effective suppression of the delayed autocorrelation peaks associated with the feedback cavity. For higher pump-2 powers beyond the ESA measurement range, an estimated radio frequency bandwidth of 67.7 GHz is obtained from optical-spectrum-based beat-frequency analysis. The proposed scheme provides a simple and effective approach for bandwidth broadening and TDS suppression in optical-feedback chaotic laser systems.

  • Temperature Sensing Based on Accumulation of Mode Shifts in TFBG

    by Zhengyang Zhong, Zhen Chen, Haitao Yan, Daofu Han

    This study presents an ultra-sensitive temperature sensor using tilted fiber Bragg gratings (TFBGs). By analyzing accumulated cladding-mode wavelength shifts with neural networks, we achieve an enhancement of the TFBG’s resolution from its intrinsic value of 10.2 pm/°C up to 490.24 pm/°C, more than 40 times higher than conventional FBGs. The system reaches $0.15~^{\circ }$ C accuracy across 40- $140~^{\circ }$ C, with 0.99979 goodness-of-fit and 0.0007087 nm/°C standard deviation (SE), near-ideal linearity and low SE. Unlike traditional peak-tracking, our machine learning approach decodes complex multi-mode coupling in TFBG spectra, enabling sub-degree resolution and high stability. This strategy advances high-precision fiber-optic sensing for industrial temperature monitoring and multimode integrated detection.


  • Open Access

    The Construction of an Artificial Intelligence Model for the Intelligent Design of Ring Erbium-Doped Fiber Lasers

    by Lan Luo, Suhui Weng, Rui Xiang, Daofu Han, Haitao Yan

    Erbium-doped fiber laser serves as a crucial cornerstone in the development of optical communications while its performance design primarily relies on inefficient manual adjustments. This paper proposes an AI model for the intelligent design of ring erbium-doped fiber lasers, in which the variables are preset based on the complex nonlinear relationships among 5 key design parameters of the ring erbium-doped fiber laser. The model integrates the theoretical mechanisms of the ring erbium-doped fiber laser with 3-layer fully connected neural networks. By employing a new dual-channel neural network architecture with physical constraints, the model enables the prediction of output characteristics under various parameter combinations and facilitates the inversion of target performance indicators to structural parameters. The application of design parameters resulted in a deviation of only 3.91% in the output power of the erbium-doped fiber laser, while reducing the design process to approximately 2 hours. This method facilitates the intelligent design of erbium-doped fiber lasers and offers a novel approach for the intelligent design of ring fiber lasers.


  • Refined Spectral Regulation of Chirped Fiber Bragg Gratings

    by Zhanwu Xie, Pengfei Li, Dongmei Guo, Hui Hao, Haitao Yan

    A novel technique is proposed for refining the spectral regulation of chirped fiber Bragg gratings (CFBGs) during the fabrication process, utilizing an ultraviolet (UV) laser with a chirped phase mask. By incorporating an additional phase into the Hamming window function, a new laser control function is generated. This supplementary phase directly enhances the waveform shift parameter and introduces an extra degree of freedom. Consequently, it becomes easier to accurately control the direct-current component in the photo-induced refractive index change during grating writing, leading to a more precise distribution of the refractive index gradient within the grating. The effectiveness of this method was validated through experiments conducted over a wide bandwidth of 20 nm for the CFBGs. The number of peaks from 1 to 4 were investigated, achieving a contrast of 40 dB. Extensive testing and verification were performed on the peak position shifts within the modulation bandwidth of numerous CFBGs. The results demonstrated that this new approach enables the fabrication of CFBGs with arbitrary waveform spectra. This technique significantly improves the optical performance and application value of CFBGs, offering a means to fabricate high-performance CFBGs using the UV mask method.


  • Open Access

    Experimental Study of the Resonant Response of Monolayer Colloidal Crystal Waveguide by Symmetric Probing

    by Wenxiu Wang, Wenjian Zhang, Hui Hao, Zhanwu Xie, Liya Liu, Wei Xia, Haitao Yan

    The extra-interfacial manifestations induced by the waveguide resonance properties of monolayer colloidal crystals (MCCs) have been well discovered by symmetrically probing their reflectance spectra. To clearly analyze the origin of the resonance peaks in the spectra obtained by reflection probing, experimental and calculated values were compared and the results for monolayers with different arrangement structures were compared. The different contributions to the resonance modes by different light bands entering the MCC were elucidated. In addition, the experimental results visualize that changing the incident angle, lattice and polarization can effectively modulate the wavelength position and intensity of the characteristic peaks induced by the resonance of the monolayer waveguide.


  • Open Access

    Thermal Modulation of a Chaotic Fiber Laser by Using a Phase-Shifted Fiber Bragg Grating

    by Zhanwu Xie, Wenlong Zeng, Pengfei Li, Haitao Yan, Daofu Han

    Thermal modulation of a chaotic fire laser by using a phase-shifted fiber Bragg grating (PS-FBG) is proposed. In this chaotic laser system, a double-ring resonator model is employed, leveraging the laser self-mixing method. Specifically, one of the rings serves as the laser resonator cavity, while the other ring acts as the cavity for injecting optical feedback. A PS-FBG is setting in the laser resonant optical path to select and limit the dominant frequency of laser signals. The laser system enters chaotic state through adjusting the intensities of optical feedback self-mixing. The temperature of the PS-FBG can be changed at 26-70 °C in stepping of 0.5 °C to control the chaotic laser. According to the experimental results, the chaotic signal has a highly sensitive dynamic response to the temperature change of PS-FBG. An easy method for dynamic modulation changes of chaotic laser signal is provided, the system has great potential application value in the FBG sensing, optical storage and information transfer of chaotic laser communication.


  • Open Access

    An Erbium-Doped Fiber Source with Near-Gaussian-Shaped Spectrum Based on Double-Stage Energy Matching and LPFGs

    by Shiyong Wan, Tiankui Zhan, Die Hu, Haitao Yan, Daofu Han

    An Erbium-doped fiber source with a near-Gaussian-shaped spectrum consisting of only a single peak, based on the double-stage energy matching and LPFGs, is proposed and demonstrated. A double-stage Erbium-doped fiber source system is built. The first-stage structure adopts the single-pass forward pumping method with a 15 m Erbium-doped fiber, while the second-stage structure adopts the backward-pumping method with a 26.5 m Erbium-doped fiber. The energy of the output spectrum is concentrated near the long wavelength (1560 nm) through the double-pump energy matching of the two stages. Long period fiber gratings (LPFGs) are used to filter the excess light near the short wavelength (1530 nm) in order to obtain a near-Gaussian-shaped spectrum consisting of only a single peak. The output power, pump conversion efficiency, line width, 3 dB bandwidth and mean wavelength of this near-Gaussian-shaped spectrum are tested and analyzed. When the pump powers of the first and second stages are 50 mW and 360 mW, respectively, the results show that a near-Gaussian-shaped spectrum with a power of 10.17 mW, spectral line width of 19.767 nm, and mean wavelength stability of −0.978 ppm/mW can be obtained. This research provides a method for the generation of a near-Gaussian-shaped spectrum with high output power and excellent mean wavelength stability, and it can produce multiple forms and energies of near-Gaussian-shaped spectra via this Erbium-doped fiber source.


  • Open Access

    A Refractive Index Sensor Based on Micro-Nano Fiber with Chirped Fiber Bragg Grating Embedded a Microfluidic Chip

    by Hai-Tao Yan, Zhanwu Xie, Pengfei Li, Hongtao Zhang, Daofu Han

    A refractive index (RI) sensor based on micro-nano fiber (MN-Fiber) with chirped fiber Bragg grating (CFBG) Fabry-Perot cavity (FP-cavity) for microflidic chip has been proposed. A single-mode fiber is drawing by hydrogen flame heading come into micro-nano fiber. Two chirped FBGs are written into this micro-nano fiber by UV mask exposure method, one is at the tapered region, another is at the micro-nano region. Then a micro-nano fiber with Chirped fiber Bragg grating (MN-CFBGs) FP-cavity sensor is formed. The Bragg reflection wavelength of two CFBGs is 1620 nm, 3-dB bandwidth is above 50 nm. The reflectance of two CFBGs is 70% and 99%, respectively. The effects of reflectivity and bandwidth of the CFBGs resonator cavity, diameter and length of MN-Fiber with this sensor’s optical properties are analysis and discussion. CFBGs FP-cavity can give MN-Fiber transmission mode of frequency selective, strengthen specific patterns of the waves of resonance and the stability of optical signal in a lager bandwidth. This sensor is embedded in a microfluidic chip and the MN-Fiber region is immersion microfluid in different channel. The experimental results show that RI sensitivity of the sensor is -986 nm/RIU, and the contrast of the interference fringes of the sensor is 0.114, and the signal of the sensor has little or no noise. The CFBG-FP sensor not only has high sensitivity andlager measurement range, but also high contrast resonance signal and stability.