Daofu Han
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Daofu Han has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
- Haitao Yan
College of Electronic Engineering, Nanjing Xiaozhuang University, Nanjing, China
7 shared publications Haitao Yan
Nanjing Xiao Zhuang University
3 shared publications- Zhanwu Xie
School of Computer and Electronic Information, Nanjing Normal University, Nanjing 210023, China
3 shared publications - Hongtao Zhang
Henan University of Science and Technology
2 shared publications - Shiyong Wan
School of Physics and Materials Science, Nanchang University, Nanchang 330031, China
2 shared publications - Tiankui Zhan
School of Physics and Materials Science, Nanchang University, Nanchang 330031, China
2 shared publications
Latest Publications
- Open Access
CFBG Dispersion Compensation Tailored to Actual Fiber Dispersion
Fiber dispersion causes pulse broadening and signal distortion. Existing dispersion compensation approaches depend on standardized dispersion parameters at specific wavelengths (e.g., 1550 nm), which often mismatch actual fiber dispersion, leading to residual dispersion. We develop a Sagnac ring interferometry and electro-optic modulation system, combined with machine learning, to accurately characterize the C-band dispersion curve of a G.652D fiber, and inversely design a chirped fiber Bragg grating (CFBG) for tailored compensation. However, when attempting to quantify the residual dispersion numerically, conventional differentiation methods yield physically implausible results. Monte Carlo simulations confirm this fundamental unreliability, yielding a 95% confidence interval of 319,605 ps/(nm·km). To circumvent this limitation, we propose a joint evaluation method based on refractive index flatness and group delay uniformity. Within 1545–1555 nm, both indicators fluctuate by no more than 0.015% relative to their means, confirming that residual dispersion has been effectively suppressed. This approach provides a precise, personalized compensation mechanism applicable to optical fibers with individual dispersion characteristics, offering a controllable path for adaptive dispersion compensation in high-speed communication systems.
Open AccessCFBG Dispersion Compensation Tailored to Actual Fiber Dispersion
Fiber dispersion causes pulse broadening and signal distortion. Existing dispersion compensation approaches depend on standardized dispersion parameters at specific wavelengths (e.g., 1550 nm), which often mismatch actual fiber dispersion, leading to residual dispersion. We develop a Sagnac ring interferometry and electro-optic modulation system, combined with machine learning, to accurately characterize the C-band dispersion curve of a G.652D fiber, and inversely design a chirped fiber Bragg grating (CFBG) for tailored compensation. However, when attempting to quantify the residual dispersion numerically, conventional differentiation methods yield physically implausible results. Monte Carlo simulations confirm this fundamental unreliability, yielding a 95% confidence interval of 319,605 ps/(nm·km). To circumvent this limitation, we propose a joint evaluation method based on refractive index flatness and group delay uniformity. Within 1545–1555 nm, both indicators fluctuate by no more than 0.015% relative to their means, confirming that residual dispersion has been effectively suppressed. This approach provides a precise, personalized compensation mechanism applicable to optical fibers with individual dispersion characteristics, offering a controllable path for adaptive dispersion compensation in high-speed communication systems.
- 17 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 38 (11) , 747-750
Temperature Sensing Based on Accumulation of Mode Shifts in TFBG
This study presents an ultra-sensitive temperature sensor using tilted fiber Bragg gratings (TFBGs). By analyzing accumulated cladding-mode wavelength shifts with neural networks, we achieve an enhancement of the TFBG’s resolution from its intrinsic value of 10.2 pm/°C up to 490.24 pm/°C, more than 40 times higher than conventional FBGs. The system reaches $0.15~^{\circ }$ C accuracy across 40- $140~^{\circ }$ C, with 0.99979 goodness-of-fit and 0.0007087 nm/°C standard deviation (SE), near-ideal linearity and low SE. Unlike traditional peak-tracking, our machine learning approach decodes complex multi-mode coupling in TFBG spectra, enabling sub-degree resolution and high stability. This strategy advances high-precision fiber-optic sensing for industrial temperature monitoring and multimode integrated detection.
- 17 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 38 (11) , 747-750
Temperature Sensing Based on Accumulation of Mode Shifts in TFBG
This study presents an ultra-sensitive temperature sensor using tilted fiber Bragg gratings (TFBGs). By analyzing accumulated cladding-mode wavelength shifts with neural networks, we achieve an enhancement of the TFBG’s resolution from its intrinsic value of 10.2 pm/°C up to 490.24 pm/°C, more than 40 times higher than conventional FBGs. The system reaches $0.15~^{\circ }$ C accuracy across 40- $140~^{\circ }$ C, with 0.99979 goodness-of-fit and 0.0007087 nm/°C standard deviation (SE), near-ideal linearity and low SE. Unlike traditional peak-tracking, our machine learning approach decodes complex multi-mode coupling in TFBG spectra, enabling sub-degree resolution and high stability. This strategy advances high-precision fiber-optic sensing for industrial temperature monitoring and multimode integrated detection.
- Open Access
- 16 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Journal
- Vol. 17 (6) , 1-7
The Construction of an Artificial Intelligence Model for the Intelligent Design of Ring Erbium-Doped Fiber Lasers
Erbium-doped fiber laser serves as a crucial cornerstone in the development of optical communications while its performance design primarily relies on inefficient manual adjustments. This paper proposes an AI model for the intelligent design of ring erbium-doped fiber lasers, in which the variables are preset based on the complex nonlinear relationships among 5 key design parameters of the ring erbium-doped fiber laser. The model integrates the theoretical mechanisms of the ring erbium-doped fiber laser with 3-layer fully connected neural networks. By employing a new dual-channel neural network architecture with physical constraints, the model enables the prediction of output characteristics under various parameter combinations and facilitates the inversion of target performance indicators to structural parameters. The application of design parameters resulted in a deviation of only 3.91% in the output power of the erbium-doped fiber laser, while reducing the design process to approximately 2 hours. This method facilitates the intelligent design of erbium-doped fiber lasers and offers a novel approach for the intelligent design of ring fiber lasers.
- 16 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Journal
- Vol. 17 (6) , 1-7
Open AccessThe Construction of an Artificial Intelligence Model for the Intelligent Design of Ring Erbium-Doped Fiber Lasers
Erbium-doped fiber laser serves as a crucial cornerstone in the development of optical communications while its performance design primarily relies on inefficient manual adjustments. This paper proposes an AI model for the intelligent design of ring erbium-doped fiber lasers, in which the variables are preset based on the complex nonlinear relationships among 5 key design parameters of the ring erbium-doped fiber laser. The model integrates the theoretical mechanisms of the ring erbium-doped fiber laser with 3-layer fully connected neural networks. By employing a new dual-channel neural network architecture with physical constraints, the model enables the prediction of output characteristics under various parameter combinations and facilitates the inversion of target performance indicators to structural parameters. The application of design parameters resulted in a deviation of only 3.91% in the output power of the erbium-doped fiber laser, while reducing the design process to approximately 2 hours. This method facilitates the intelligent design of erbium-doped fiber lasers and offers a novel approach for the intelligent design of ring fiber lasers.
- 24 December 2024
- Published by Optica Publishing Group in Optics Express
- Vol. 32 (27) , 48995-49005
Low cross-sensitivity and sensitivity enhanced FBG sensor based on OCMI with three cascaded FBGs
This paper presents a highly sensitive, temperature-insensitive optical carrier microwave interferometry (OCMI) system using a cascaded three fiber Bragg grating (FBG) structure to generate an enhanced Vernier effect for sensing applications. The enhanced Vernier effect is created by superimposing the interferograms of two separate interferometers formed by pairing the sensing FBG with each reference FBG. Experimental and theoretical results show that in strain sensing, the sensitivity based on enhanced Vernier effect is -4.642 MHz/µε, which is 66.3 and 61.4 times higher than that of strain sensor based on two single interferometers used to generate the enhanced Vernier effect in this system respectively. Compared with the strain sensor based on traditional Vernier effect, this sensor has higher sensitivity, and in addition the amplification factor for measuring sensitivity can be easily adjusted by changing the spatial distance between the three cascade FBGs. Moreover, the temperature sensitivity is decreased from -38.318 MHz/°C to -71.384 kHz/°C with temperature compensation. The sensor exhibits high resolution, high sensitivity, and low cross-sensitivity, making it great potential for measuring small physical changes in complex environments.
- 24 December 2024
- Published by Optica Publishing Group in Optics Express
- Vol. 32 (27) , 48995-49005
Low cross-sensitivity and sensitivity enhanced FBG sensor based on OCMI with three cascaded FBGs
This paper presents a highly sensitive, temperature-insensitive optical carrier microwave interferometry (OCMI) system using a cascaded three fiber Bragg grating (FBG) structure to generate an enhanced Vernier effect for sensing applications. The enhanced Vernier effect is created by superimposing the interferograms of two separate interferometers formed by pairing the sensing FBG with each reference FBG. Experimental and theoretical results show that in strain sensing, the sensitivity based on enhanced Vernier effect is -4.642 MHz/µε, which is 66.3 and 61.4 times higher than that of strain sensor based on two single interferometers used to generate the enhanced Vernier effect in this system respectively. Compared with the strain sensor based on traditional Vernier effect, this sensor has higher sensitivity, and in addition the amplification factor for measuring sensitivity can be easily adjusted by changing the spatial distance between the three cascade FBGs. Moreover, the temperature sensitivity is decreased from -38.318 MHz/°C to -71.384 kHz/°C with temperature compensation. The sensor exhibits high resolution, high sensitivity, and low cross-sensitivity, making it great potential for measuring small physical changes in complex environments.
- Open Access
- 7 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Journal
- Vol. 15 (5) , 1-5
Thermal Modulation of a Chaotic Fiber Laser by Using a Phase-Shifted Fiber Bragg Grating
Thermal modulation of a chaotic fire laser by using a phase-shifted fiber Bragg grating (PS-FBG) is proposed. In this chaotic laser system, a double-ring resonator model is employed, leveraging the laser self-mixing method. Specifically, one of the rings serves as the laser resonator cavity, while the other ring acts as the cavity for injecting optical feedback. A PS-FBG is setting in the laser resonant optical path to select and limit the dominant frequency of laser signals. The laser system enters chaotic state through adjusting the intensities of optical feedback self-mixing. The temperature of the PS-FBG can be changed at 26-70 °C in stepping of 0.5 °C to control the chaotic laser. According to the experimental results, the chaotic signal has a highly sensitive dynamic response to the temperature change of PS-FBG. An easy method for dynamic modulation changes of chaotic laser signal is provided, the system has great potential application value in the FBG sensing, optical storage and information transfer of chaotic laser communication.
- 7 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Journal
- Vol. 15 (5) , 1-5
Open AccessThermal Modulation of a Chaotic Fiber Laser by Using a Phase-Shifted Fiber Bragg Grating
Thermal modulation of a chaotic fire laser by using a phase-shifted fiber Bragg grating (PS-FBG) is proposed. In this chaotic laser system, a double-ring resonator model is employed, leveraging the laser self-mixing method. Specifically, one of the rings serves as the laser resonator cavity, while the other ring acts as the cavity for injecting optical feedback. A PS-FBG is setting in the laser resonant optical path to select and limit the dominant frequency of laser signals. The laser system enters chaotic state through adjusting the intensities of optical feedback self-mixing. The temperature of the PS-FBG can be changed at 26-70 °C in stepping of 0.5 °C to control the chaotic laser. According to the experimental results, the chaotic signal has a highly sensitive dynamic response to the temperature change of PS-FBG. An easy method for dynamic modulation changes of chaotic laser signal is provided, the system has great potential application value in the FBG sensing, optical storage and information transfer of chaotic laser communication.
- Open Access
An Erbium-Doped Fiber Source with Near-Gaussian-Shaped Spectrum Based on Double-Stage Energy Matching and LPFGs
An Erbium-doped fiber source with a near-Gaussian-shaped spectrum consisting of only a single peak, based on the double-stage energy matching and LPFGs, is proposed and demonstrated. A double-stage Erbium-doped fiber source system is built. The first-stage structure adopts the single-pass forward pumping method with a 15 m Erbium-doped fiber, while the second-stage structure adopts the backward-pumping method with a 26.5 m Erbium-doped fiber. The energy of the output spectrum is concentrated near the long wavelength (1560 nm) through the double-pump energy matching of the two stages. Long period fiber gratings (LPFGs) are used to filter the excess light near the short wavelength (1530 nm) in order to obtain a near-Gaussian-shaped spectrum consisting of only a single peak. The output power, pump conversion efficiency, line width, 3 dB bandwidth and mean wavelength of this near-Gaussian-shaped spectrum are tested and analyzed. When the pump powers of the first and second stages are 50 mW and 360 mW, respectively, the results show that a near-Gaussian-shaped spectrum with a power of 10.17 mW, spectral line width of 19.767 nm, and mean wavelength stability of −0.978 ppm/mW can be obtained. This research provides a method for the generation of a near-Gaussian-shaped spectrum with high output power and excellent mean wavelength stability, and it can produce multiple forms and energies of near-Gaussian-shaped spectra via this Erbium-doped fiber source.
Open AccessAn Erbium-Doped Fiber Source with Near-Gaussian-Shaped Spectrum Based on Double-Stage Energy Matching and LPFGs
An Erbium-doped fiber source with a near-Gaussian-shaped spectrum consisting of only a single peak, based on the double-stage energy matching and LPFGs, is proposed and demonstrated. A double-stage Erbium-doped fiber source system is built. The first-stage structure adopts the single-pass forward pumping method with a 15 m Erbium-doped fiber, while the second-stage structure adopts the backward-pumping method with a 26.5 m Erbium-doped fiber. The energy of the output spectrum is concentrated near the long wavelength (1560 nm) through the double-pump energy matching of the two stages. Long period fiber gratings (LPFGs) are used to filter the excess light near the short wavelength (1530 nm) in order to obtain a near-Gaussian-shaped spectrum consisting of only a single peak. The output power, pump conversion efficiency, line width, 3 dB bandwidth and mean wavelength of this near-Gaussian-shaped spectrum are tested and analyzed. When the pump powers of the first and second stages are 50 mW and 360 mW, respectively, the results show that a near-Gaussian-shaped spectrum with a power of 10.17 mW, spectral line width of 19.767 nm, and mean wavelength stability of −0.978 ppm/mW can be obtained. This research provides a method for the generation of a near-Gaussian-shaped spectrum with high output power and excellent mean wavelength stability, and it can produce multiple forms and energies of near-Gaussian-shaped spectra via this Erbium-doped fiber source.
- Open Access
- 1 January 2022
- Published by Elsevier in SSRN Electronic Journal
Single Wavelength Tunable Ultra Wideband Erbium-Doped Fiber Laser Based on Double-Loop Pumping Regulation
A dual ring cavity pumped single wavelength tunable ultra wideband erbium-doped fiber laser based on fiber-optic Fabry-Perot (F-P) tunable filter (FOTF) and Sagnac ring was proposed and verified by experiments. This fiber laser adopts the structure of F-P manual adjustable filter combined with Sagnac ring as the filtering system, and uses 600 m SMF to reduce mode competition. In the experiment, a 7m long erbium-doped fiber is used as the gain medium and a pump source and an erbium-doped fiber amplifier are used to adjust the output light. The experimental results are shown the single wavelength tunable laser ranged from 1543 nm to 1573 nm, the side mode rejection ratio was as high as 52 dB, the peak power difference was less than 2 dB, and the 3 dB linewidth was about 0.05 nm with adjusting the FOTF. And then, when the gain fiber is changed into a 13m long erbium-doped fiber, almost similar experimental results are obtained, except that the tunable range of the single wavelength laser is 1549 nm to 1579 nm. This laser can obtain a stable and wide single wavelength tunable range, which provides ideas for the research and development of single wavelength tunable laser in tuning bandwidth and stable waveform. In addition to the above experiments, we also verified the stability of the system. The wavelength fluctuation within 2.5 h is less than 0.01 nm, and the output optical power is less than 0.5 dB, which had good stability.
- 1 January 2022
- Published by Elsevier in SSRN Electronic Journal
Open AccessSingle Wavelength Tunable Ultra Wideband Erbium-Doped Fiber Laser Based on Double-Loop Pumping Regulation
A dual ring cavity pumped single wavelength tunable ultra wideband erbium-doped fiber laser based on fiber-optic Fabry-Perot (F-P) tunable filter (FOTF) and Sagnac ring was proposed and verified by experiments. This fiber laser adopts the structure of F-P manual adjustable filter combined with Sagnac ring as the filtering system, and uses 600 m SMF to reduce mode competition. In the experiment, a 7m long erbium-doped fiber is used as the gain medium and a pump source and an erbium-doped fiber amplifier are used to adjust the output light. The experimental results are shown the single wavelength tunable laser ranged from 1543 nm to 1573 nm, the side mode rejection ratio was as high as 52 dB, the peak power difference was less than 2 dB, and the 3 dB linewidth was about 0.05 nm with adjusting the FOTF. And then, when the gain fiber is changed into a 13m long erbium-doped fiber, almost similar experimental results are obtained, except that the tunable range of the single wavelength laser is 1549 nm to 1579 nm. This laser can obtain a stable and wide single wavelength tunable range, which provides ideas for the research and development of single wavelength tunable laser in tuning bandwidth and stable waveform. In addition to the above experiments, we also verified the stability of the system. The wavelength fluctuation within 2.5 h is less than 0.01 nm, and the output optical power is less than 0.5 dB, which had good stability.
- Open Access
- 1 January 2022
- Published by Elsevier in SSRN Electronic Journal
A Refractive Index Sensor Based on Micro-Nano Fiber with Chirped Fiber Bragg Grating Embedded a Microfluidic Chip
A refractive index (RI) sensor based on micro-nano fiber (MN-Fiber) with chirped fiber Bragg grating (CFBG) Fabry-Perot cavity (FP-cavity) for microflidic chip has been proposed. A single-mode fiber is drawing by hydrogen flame heading come into micro-nano fiber. Two chirped FBGs are written into this micro-nano fiber by UV mask exposure method, one is at the tapered region, another is at the micro-nano region. Then a micro-nano fiber with Chirped fiber Bragg grating (MN-CFBGs) FP-cavity sensor is formed. The Bragg reflection wavelength of two CFBGs is 1620 nm, 3-dB bandwidth is above 50 nm. The reflectance of two CFBGs is 70% and 99%, respectively. The effects of reflectivity and bandwidth of the CFBGs resonator cavity, diameter and length of MN-Fiber with this sensor’s optical properties are analysis and discussion. CFBGs FP-cavity can give MN-Fiber transmission mode of frequency selective, strengthen specific patterns of the waves of resonance and the stability of optical signal in a lager bandwidth. This sensor is embedded in a microfluidic chip and the MN-Fiber region is immersion microfluid in different channel. The experimental results show that RI sensitivity of the sensor is -986 nm/RIU, and the contrast of the interference fringes of the sensor is 0.114, and the signal of the sensor has little or no noise. The CFBG-FP sensor not only has high sensitivity andlager measurement range, but also high contrast resonance signal and stability.
- 1 January 2022
- Published by Elsevier in SSRN Electronic Journal
Open AccessA Refractive Index Sensor Based on Micro-Nano Fiber with Chirped Fiber Bragg Grating Embedded a Microfluidic Chip
A refractive index (RI) sensor based on micro-nano fiber (MN-Fiber) with chirped fiber Bragg grating (CFBG) Fabry-Perot cavity (FP-cavity) for microflidic chip has been proposed. A single-mode fiber is drawing by hydrogen flame heading come into micro-nano fiber. Two chirped FBGs are written into this micro-nano fiber by UV mask exposure method, one is at the tapered region, another is at the micro-nano region. Then a micro-nano fiber with Chirped fiber Bragg grating (MN-CFBGs) FP-cavity sensor is formed. The Bragg reflection wavelength of two CFBGs is 1620 nm, 3-dB bandwidth is above 50 nm. The reflectance of two CFBGs is 70% and 99%, respectively. The effects of reflectivity and bandwidth of the CFBGs resonator cavity, diameter and length of MN-Fiber with this sensor’s optical properties are analysis and discussion. CFBGs FP-cavity can give MN-Fiber transmission mode of frequency selective, strengthen specific patterns of the waves of resonance and the stability of optical signal in a lager bandwidth. This sensor is embedded in a microfluidic chip and the MN-Fiber region is immersion microfluid in different channel. The experimental results show that RI sensitivity of the sensor is -986 nm/RIU, and the contrast of the interference fringes of the sensor is 0.114, and the signal of the sensor has little or no noise. The CFBG-FP sensor not only has high sensitivity andlager measurement range, but also high contrast resonance signal and stability.
- 15 September 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 33 (21) , 1169-1172
High Temperature Accurate Monitoring Based on Phase-Shifting Grating and Photoelectric Oscillation
A high temperature real-time accurate monitoring system based on photoelectric oscillation had been proposed and demonstrated. We use the narrow bandwidth characteristics of phase-shifting fiber Bragg grating (PS-FBG) to generate stable photoelectric oscillation signals. After the PS-FBG is ceramic packaged to adapt to and apply to 500 °C high temperature, the wavelength shift caused by temperature change is precisely responded by narrow linewidth PS-FBG, so the change of photoelectric oscillation signal can be monitored in real time with high precision. The experimental results show that the sensitivity is -1.24 GHz/°C and the linearity is -0.99953. The system has a resolution of 0.0083 °C. The test system has excellent potential application value in precise control of high temperature environment such as metal smelting, crystal growth, chemistry and pharmaceutical engineering.
- 15 September 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 33 (21) , 1169-1172
High Temperature Accurate Monitoring Based on Phase-Shifting Grating and Photoelectric Oscillation
A high temperature real-time accurate monitoring system based on photoelectric oscillation had been proposed and demonstrated. We use the narrow bandwidth characteristics of phase-shifting fiber Bragg grating (PS-FBG) to generate stable photoelectric oscillation signals. After the PS-FBG is ceramic packaged to adapt to and apply to 500 °C high temperature, the wavelength shift caused by temperature change is precisely responded by narrow linewidth PS-FBG, so the change of photoelectric oscillation signal can be monitored in real time with high precision. The experimental results show that the sensitivity is -1.24 GHz/°C and the linearity is -0.99953. The system has a resolution of 0.0083 °C. The test system has excellent potential application value in precise control of high temperature environment such as metal smelting, crystal growth, chemistry and pharmaceutical engineering.
- 15 September 2021
- Published by Optica Publishing Group in Applied Optics
- Vol. 60 (27) , 8384-8389
Cantilever deflection optical fiber sensor based on a chirped fiber grating Fabry–Perot cavity
A cantilever deflection fiber-optic sensor based on chirped fiber grating (CFG) Fabry–Perot (FP) cavity had been proposed and experimental demonstrated. Two CFBGs with the same chirped coefficient direction and grating parameters are written in one single-mode fiber by UV mask exposure to form the CFG-FP cavity. The central wavelength of two CFGs is 1549.6072 nm, the 3 dB bandwidth is 2.9897 nm, and the physical cavity length of two CFGs is 1 cm. The grating region of two CFGs are straightness fixed on a cantilever beam, forming a sensor. Then the optical properties of this sensor are tested with different stresses at different positions of the cantilever beam. The experimental results show that this sensor can obtain linear displacement of a cantilever beam, overcoming the abilities of the FBG sensor, which only performed point measurement defect. The wavelength drift sensitivity of the sensor is 2.31 pm/g, and linearity is 0.99916. This sensor has great application value in the precise measurement of cantilever beam type and two-dimensional scale strain.
- 15 September 2021
- Published by Optica Publishing Group in Applied Optics
- Vol. 60 (27) , 8384-8389
Cantilever deflection optical fiber sensor based on a chirped fiber grating Fabry–Perot cavity
A cantilever deflection fiber-optic sensor based on chirped fiber grating (CFG) Fabry–Perot (FP) cavity had been proposed and experimental demonstrated. Two CFBGs with the same chirped coefficient direction and grating parameters are written in one single-mode fiber by UV mask exposure to form the CFG-FP cavity. The central wavelength of two CFGs is 1549.6072 nm, the 3 dB bandwidth is 2.9897 nm, and the physical cavity length of two CFGs is 1 cm. The grating region of two CFGs are straightness fixed on a cantilever beam, forming a sensor. Then the optical properties of this sensor are tested with different stresses at different positions of the cantilever beam. The experimental results show that this sensor can obtain linear displacement of a cantilever beam, overcoming the abilities of the FBG sensor, which only performed point measurement defect. The wavelength drift sensitivity of the sensor is 2.31 pm/g, and linearity is 0.99916. This sensor has great application value in the precise measurement of cantilever beam type and two-dimensional scale strain.