AMAbbas Mehraban

Abbas Mehraban

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Abbas Mehraban has a total of 14 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Multi-Objective Sizing of an Electric Aircraft Power System Under n-1 Contingency Constraints: Weight–Volume–Losses Trade-Offs

    by Ahmad Naderi, Abbas Mehraban, Michael Terörde

    A multi-objective sizing framework for the Electric Power System (EPS) of a reference short-range electrified aircraft is presented under n-1 contingency constraints. The workflow integrates database-driven component sizing and selection in MATLAB with steady-state load-flow and contingency evaluation in DIgSILENT PowerFactory, so that the effect of post-outage re-sizing can be quantified consistently. A radial DC architecture is considered together with multiple propulsion distributions and a discrete DC grid voltage sweep. The EPS is evaluated in three states: Before Contingency (BeCon), After Contingency (AfCon), and After Contingency with Loss Refinement (AfConLF). The novelty of this work lies in the integrated contingency-aware and loss-refined multi-objective sizing framework, which enables a quantitatively grounded comparison of aircraft EPS architectures at system level. Multi-objective selection is carried out for the main EPS components and for the overall EPS using total weight, total volume, and steady-state losses at the maximum take-off operating point. The results show that enforcing contingency compliance shifts the feasible trade space toward higher weight, volume, and losses, with the strongest penalty occurring in the DC–DC conversion stage and upstream DC distribution. The AfConLF step preserves the hardware ratings obtained in AfCon while refining the loss estimate by using post-contingency load factors, thereby improving the realism of the steady-state assessment without materially increasing weight or volume. In addition, the influence of DC-grid voltage and motor design on the resulting EPS trade space is quantified, providing practical guidance for selecting contingency-compliant architectures for future electric aircraft.


  • Influence of Power Split Ratio on Mass, Volume, and CO 2 Emissions in Aircraft Electric Hybrid Propulsion Systems: A Multicriteria Decision-Making Approach

    by Fanke Zeng, Abbas Mehraban, Ahmad Naderi, Michael Terörde, Michael Kurrat

    The aviation industry is undergoing a transformative shift toward more sustainable propulsion technologies, driven by the urgent need to reduce greenhouse gas emissions. As conventional propulsion faces increasing limitations in meeting long-term decarbonization targets, the electrification of aircraft has received increasing attention, particularly for regional and short-haul aircraft. Within these systems, the distribution of power between onboard energy storage and power sources, commonly referred to as the power split ratio, has a significant impact on overall performance. This article presents a quantitative investigation into how varying power split ratios affect the mass, volume, and carbon dioxide emissions of electric propulsion systems. A computational algorithm and multicriteria decision-making method are applied to estimate the performance metrics of major components, using power density, energy density and efficiency as key parameters. The framework is applied to a case study of a 19-passenger commuter aircraft, demonstrating how component-level decisions propagate to system-level tradeoffs. The results underscore the dominant influence of power supply and energy storage elements—battery, hydrogen (as energy carrier for fuel cell) and aviation kerosene—on mass, volume and $\text{CO}_{2}$ emissions of electric propulsion system, and provide guidance for choosing prioritized architectural concepts and operating points.


  • Open Access

    System-Wide Analysis of Electric Power System for a Reference Short-Range Electrified Aircraft

    by Ahmad Naderi, Robert Keilmann, Arsham Asgari, Abbas Mehraban, Regine Mallwitz, Markus Henke, Michael Terörde

    This study investigates the electrification of a reference short-range passenger aircraft, focusing on optimizing the Electric Power System (EPS). An iterative optimization method is employed to identify the optimal specifications for individual EPS components, considering gravimetric and volumetric power densities and efficiency as single objectives. The study introduces a structured, decoupled optimization framework that isolates the impact of each design variable on weight, volume, and efficiency, providing clearer insights into system-level trade-offs and offering a novel perspective for EPS design. By incorporating component characteristics into the design process, optimal configurations are achieved. Results indicate that certain motor designs enhance EPS performance by reducing weight, increasing efficiency, or minimizing volume, depending on the optimization objective. Similarly, during the optimization process and selection of power electronics configurations, certain topologies demonstrated superior efficiency, while others excelled in different performance criteria. In transmission line selection, superconducting cables are more efficient than conventional cables in minimizing electrical losses at lower voltages, despite being bulkier. Conversely, conventional cables are more advantageous at higher voltage levels due to their lighter weight. Moreover, modular and scalable circuit breakers are recommended for their adaptability across varying voltage levels. The optimization results are further supported by sensitivity analyses that reveal the influence of voltage level, shaft power, and cable technology on overall system metrics. Additionally, feasibility assessments benchmarked against a conventional ATR-72 propulsion system highlight the current limitations of battery integration and the challenging energy density requirements for full electrification.


  • Open Access

    Dual‐inertia flywheel energy storage system for electric vehicles

    by Abbas Mehraban, Teymoor Ghanbari, Ebrahim Farjah

    Managing the high‐rate‐power transients of Electric Vehicles (EVs) in a drive cycle is of great importance from the battery health and drive range aspects. This can be achieved by high power‐density storage, such as a high‐speed Flywheel Energy Storage System (FESS). It is shown that a variable‐mass flywheel can effectively utilise the FESS useable capacity in most transients close to optimal. Novel variable capacities FESS is proposed by introducing Dual‐Inertia FESS (DIFESS) for EVs. The feasibility of the proposed concept is evaluated by deriving the size of a Single‐Inertia FESS (SIFESS) for a battery EV, which runs the well‐known Urban Dynamometer Driving Schedule. The sizing framework consists of an Energy Management System using the constrained Pontryagin's minimum principle and a proposed sizing algorithm. Then, by splitting the derived SIFESS inertia into two separate inertias, the appropriate engaging control of inertias is determined for some driving cycles including, the Artemis Urban, Braunschweig City, and Worldwide Harmonised Light‐duty Vehicles Test Cycle. The dual inertias suitable sizes are derived using a proposed algorithm, which targets maximising the FESS useable capacity. The results show that compared to the SIFESS, the DIFESS can employ the FESS's useable capacity more effectively.


  • Open Access

    Fault ride through enhancement of large‐scale solar plants using distributed converters

    by Seyed Mohammad Hasan Mousavi, Teymoor Ghanbari, Ebrahim Farjah, Abbas Mehraban

    The grid‐connected photovoltaic plants (GCPVPs) encounter various types of anomalies during fault occurrence in the main grid. During a fault occurrence on the grid side, the voltage of the point of common coupling (PCC) drops, causing the DC connection voltage to become too high for power balancing. This high DC voltage may damage the inverter and DC link equipment, which necessitates a reliable control scheme with low voltage passage requirements. These requirements, which obligate the GCPVP to remain connected to the main grid during abnormal conditions are generally known as low voltage ride‐through (LVRT). Herein, a developed LVRT method in the control approach that injects maximum rated current during a sag is proposed to rectify the shortcomings in single and multi‐inverter grid topologies. The proposed approach utilizes a current limiter combined with a DC braking chopper to guarantee the GCPVP's continuous participation in the power supply. Different scenarios including low and high power generations as well as two‐phase and three‐phase severe faults to the ground are considered. The results show that the proposed approach not only improves the performance in the single‐inverter system but also remedies the defects aggravated in the case of a GCPVP with several inverters.


  • Open Access

    Stator winding fault detection of induction motors using fast Fourier transform on rotor slot harmonics and least square analysis of the Park's vectors

    by Teymoor Ghanbari, Abbas Mehraban

    An efficient method for the detection of the stator winding faults (SWFs) of induction motors was dealt based on Park's vector of rotor slot harmonics (RSHs). The induced harmonic voltages of the RSHs in the stator windings are the supreme signatures for fault detection, which can be monitored in the motor currents. Using such a signature, unbalanced supply voltage and stator windings fault situations could be segregated straightforwardly. On the other hand, despite some merits, Park's vector analysis‐based methods suffer from low sensitivity and unreliability in the case of low‐severity faults. To have the advantages of both methods while tackling the shortcomings, Park's vector approach and the RSH signatures are combined in the proposed method. The RSHs are extracted using the fast Fourier transform method and the least squared approach is employed for pattern recognition. Different experimental results under various scenarios, even in the case of low severity faults, confirm that the locus of Park's vector is an elliptical shape in SWFs, while it is shapeless in other cases, such as healthy and unbalanced supply voltage cases.


  • AI-Based Control of Storage Capacity in High-Power-Density Energy Storage Systems, Used in Electric Vehicles

    by Abbas Mehraban, Teymoor Ghanbari, Ebrahim Farjah

    Exempting batteries from supplying power transients in Electric Vehicles (EVs) is beneficial to extend their useful lifespan. The adaptive capacity of High Power-density Energy Storage Systems (HPESSs) like ultracapacitors or high-speed Flywheel Energy Storage Systems (FESSs) could fulfill the targets in this context. This paper proposes a sizing/control methodology and real-time AI-based control of the storage capacity for the adaptive capacity HPESSs, used in EVs. The sizing approach consists of an optimal energy management strategy and a sizing algorithm applied to a Variable-Step HPESS (VS-HPESS). This methodology derives the battery/VS-HPESS power-split and sizes of the storage capacities. In addition, a Nonlinear Autoregressive Neural Network with eXogenous inputs (NARX-NN) is trained offline to switch the desirable capacity of the VS-HPESS in real-time operation. Finally, an experiment is designed to evaluate the proposed real-time control scheme, in which the EV power transients are emulated and applied to a dual-capacitance ultracapacitor as the VS-HPESS. The results confirm the capability of the proposed approach to meet the considered targets.


  • Integrated Optimal Energy Management and Sizing of Hybrid Battery/Flywheel Energy Storage for Electric Vehicles

    by Abbas Mehraban, Ebrahim Farjah, Teymoor Ghanbari, Lauric Garbuio

    This paper presents an integrated optimal Energy Management Strategy (EMS) and sizing of a high-speed Flywheel Energy Storage System (FESS) in a battery electric vehicle (EV). The methodology aims at extending the battery cycle life and drive range by relegating fast dynamics of the power demand to the FESS. For the EMS, the battery power and FESS energy are considered as weighted objectives of an optimization problem that are established using Pontryagin's Minimum Principle (PMP). In order to derive the optimal FESS size, the sizing algorithm is targeted to minimize the battery degradation level and increase the FESS energy interaction with the system. The performance of the proposed methodology is assessed using some driving cycles including ECE-15, UDDC, HWFET, and US06. Comparing the proposed battery/FESS to the battery-only topology, the battery SoH and life cycle are improved considerably for different driving cycles.


  • Side Effects of Air-Core Reactors in Bus Ties, Tackled by Pre-Saturated Core Fault Current Limiters

    by Teymoor Ghanbari, Abbas Mehraban, Ali Aghaei

    In this paper, a pre-saturated fault current limiter (PS-FCL) is proposed to be employed instead of the series reactors in distribution network of Mobarakeh Steel Company (MSC). In recent years, several interruptions have been reported which refer to undesirable role of the series reactors in normal condition. Significant voltage dip during heavy loads start-up is one of the main problems of the series reactors in the system. The complaints regarding the series reactors are studied as some simulation scenarios. Using PS-FCL instead of the series reactors, the same scenarios are simulated and the results are compared. The simulations are carried out using ANSYS/Maxwell and MATLAB/Simulink.

  • Open Access

    Optimal sizing of a high‐speed flywheel in an electric vehicle using the optimal control theory approach

    by Abbas Mehraban, Ebrahim Farjah, Teymoor Ghanbari, Lauric Garbuio

    This study proposes an approach for finding the optimal size of a high‐speed flywheel in an energy storage system based on battery‐flywheel cooperation, called battery‐flywheel energy storage system (BFESS), supplying an electric vehicle. Considering an energy‐based model for the flywheel and battery, including the losses, the optimal control theory is utilised as a two‐dimensional Pontryagin's minimum principle for solving the problem. The objective function of the flywheel sizing problem includes two terms, in which its maximum interaction with the system from the energy and filtering aspects are taken into consideration by a desirable weighting. While energy interaction is a common task, filtering the fast dynamics of the system such as the harsh conditions for the battery is the key role of the considered lightweight and high‐speed flywheel. A trade‐off between the energy contribution and filtering is made, targetted for the long‐term and short‐term dynamics in the drive cycles, respectively. The proposed methodology is presented in detail using some simple dynamics. Also, the sizing is carried out for the ECE‐15 urban drive cycle, the WLTC class‐3 and FTP‐75 drive cycles. The results confirm that by using the determined optimal size of the flywheel energy storage system (FESS), most of the dynamics could be handled from the filtering and energy interaction aspects.