PSPavel Salev

Pavel Salev

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Pavel Salev has a total of 81 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Enhanced Stochasticity in Irradiated Vanadium Oxide Oscillators

    by Nareg Ghazikhanian, David J. Alspaugh, Pavel Salev, Lorenzo Fratino, Marcelo Rozenberg, Ivan K. Schuller

    Insulator‐to‐metal transition (IMT) materials are highly sensitive to even minute deviations of stoichiometry, lattice defects, and disorder, which provides opportunities to engineer their electrical switching characteristics. Using vanadium oxide as a prototypical IMT resistive switching material, we demonstrate that focused ion beam irradiation induces stochastic oscillatory dynamics in simple two‐terminal switching devices. After irradiation, we observed an unusual dynamic regime where the voltage‐induced metallic state momentarily collapses into an insulating state, which results in rapid current flickering that is qualitatively different from the conventional current spiking in a Pearson‐Anson‐type oscillatory circuit implemented using the pristine material. Furthermore, the current flickering timing in the irradiated devices becomes progressively more random and sparser with increasing input voltage, resulting in nonlinear and nondeterministic oscillatory behavior. The irradiation also leads to a dramatic reduction in switching power required to induce the oscillations. These results are elucidated through random resistor network simulations, which indicate that a small number of local sites can control the electrical IMT switching properties in large devices with high defect concentration. Our results show that selective focused ion beam irradiation provides exciting prospects for engineering novel stochastic behaviors in emergent technologies that rely on intrinsic randomness of physical processes.


  • Dynamic asymmetric strain imprinted into substrates by an oxide thin film

    by Elliot Kisiel, Alexandre Pofelski, Pavel Salev, Erbin Qiu, Spencer Reisbick, Chuhang Liu, Andreas Glatz, Ishwor Poudyal, Wei He, Rourav Basak, et al.

    In film-substrate systems, the substrate role is often considered to be limited to providing static mechanical constraints. Dynamic film-substrate interactions when a structural change in the film modifies the substrate are generally disregarded. Using combined X-ray and electron microscopies, we observed that the electrically induced filament in a VO 2 film created strong asymmetric strain in the underlying Al 2 O 3 substate. This asymmetric substrate strain fed back into the film and defined the filament expansion direction, revealing the importance of film-substrate dynamic interactions in determining film functionality. Furthermore, the strain imprint propagated at least tens of microns deep into the substrate, exceeding the film thickness more than 200 times, potentially enabling substrate functionalization as an active mechanical coupling media in 3D-integrated microelectronics architectures.


  • Open Access

    Interactions Enhance Ramp Reversal Memory in Locally Phase Separated Materials

    by Y. Sun, M. Alzate Banguero, P. Salev, Ivan K. Schuller, L. Aigouy, A. Zimmers, E. W. Carlson

    The ramp‐reversal memory (RRM) effect in metal–insulator transition metal oxides (TMOs), a non‐volatile resistance change induced by repeated temperature cycling, has attracted considerable interest in neuromorphic computing and non‐volatile memory devices. Our previous defect motion model successfully explained RRM in vanadium dioxide (), capturing observed critical temperature shifts and memory accumulation throughout the sample. However, this approach lacked interactions between metallic and insulating domains. Here, we extend our model by combining a correlated Random Field Ising Model with defect diffusion‐segregation, enabling accurate hysteresis modeling while predicting the relationship between RRM and domain interactions. Our simulations demonstrate that the maximum RRM occurs when the turnaround temperature approaches the inflection point. This peak in RRM vs. turnaround temperature is consistent with prior transport measurements, as well as our own optical measurements reported here. Significantly, we find that increasing nearest‐neighbor interactions enhances the maximum memory effect, thus providing a clear mechanism for optimizing RRM performance. Since our model employs minimal assumptions, we predict that RRM should be a widespread phenomenon in materials exhibiting patterned phase coexistence of electronic domains. This work not only advances fundamental understanding of memory behavior in TMOs but also establishes a much‐needed theoretical framework for optimizing device applications.

  • Open Access

    High-Resolution Full-Field Structural Microscopy of the Voltage-Induced Filament Formation in VO2-Based Neuromorphic Devices

    by Elliot Kisiel, Pavel Salev, Ishwor Poudyal, David J. Alspaugh, Fellipe Carneiro, Erbin Qiu, Fanny Rodolakis, Zhan Zhang, Oleg G. Shpyrko, Marcelo Rozenberg, et al.

    In order to make neuromorphic functions in memristive devices more efficient, information about the structural properties of filament formation at the micro- and mesoscopic scales is necessary. Despite extensive research on VO2, a key material due to its filament formation, local operando structural measurements remain challenging and often involve destructive specimen preparation and long rastering times, greatly limiting the scope of experimental studies. Utilizing dark-field X-ray microscopy (DFXM), a full-field imaging modality, structural signatures of the filament formation process operando are revealed in VO2 devices. DFXM experiments illustrate that rutile filaments contain isolated monoclinic clusters, indicating structural nonuniformity interior to the filament. The formation of the rutile phase beneath device electrodes was shown to precede filament development, followed by the formation of filament paths guided by nucleation sites within the device. Finally, a medium-term (2, mediated by sites within the device gap that tend to switch at significantly lower voltages after electrical cycling, a tendency that persists through a brief thermal reset. High spatial resolution, large field-of-view, structure selectivity, and fast signal acquisition of DFXM provided insight into structural features of the filamentary channel and surrounding regions during voltage cycling.


  • Open Access

    Optical Mapping and On-Demand Selection of Local Hysteresis Properties in VO2

    by Melissa Alzate Banguero, Sayan Basak, Nicolas Raymond, Forrest Simmons, Pavel Salev, Ivan K. Schuller, Lionel Aigouy, Erica W. Carlson, Alexandre Zimmers

    Quantum materials have tremendous potential for disruptive applications. However, scaling devices down has been challenging due to electronic inhomogeneities in many of these materials. Understanding and controlling these electronic patterns on a local scale has thus become crucial to further new applications. To address this issue, we have developed a new optical microscopy method that allows for the precise quasi-continuous filming of the insulator-to-metal transition in VO­2 with fine temperature steps. This enables us to track metal and insulator domains over thousands of images and quantify, for the first time, the local hysteresis properties of VO­2 thin films. The analysis of the maps has allowed us to quantify cycle-to-cycle reproducibility of the local transitions and reveals a positive correlation between the local insulator–metal transition temperatures T­c and the local hysteresis widths ΔTc. These maps also enable the optical selection of regions of high or low transition temperature in combination with large or nearly absent local hysteresis. These maps pave the way to understand and use stochasticity to advantage in these materials by picking on-demand transition properties, allowing the scaling down of devices such as optical switches, infrared microbolometers and spiking neural networks.


  • Voltage-induced magnetic domain evolution in a phase-change material

    by Tian-Yue Chen, Dayne Y. Sasaki, Barat Achinuq, Nareg Ghazikhanian, Pavel Salev, Hendrik Ohldag, Andreas Scholl, Ivan K. Schuller, Yayoi Takamura, Andrew D. Kent

    Applying voltage to metal–insulator transition (MIT) materials allows electrical actuation of the local electronic phase state. In MIT systems that have the electronic order coupled with the magnetic order, voltage switching of the electronic phase state can also enable the electrical manipulation of magnetic properties. In this work, we utilized x-ray magnetic circular dichroism photoemission electron microscopy (XMCD-PEEM) to investigate the control of magnetic domain configurations in ferromagnetic MIT electrical switches. For applied voltages above a threshold value, the XMCD-PEEM images show that the magnetic domains separate into two distinct regions: one with a high contrast (white/black), indicating well-defined micrometer-scale magnetic domains with a component of their magnetization aligned parallel/antiparallel to the x-ray helicity, and the other with different shades of intermediate contrast (gray). Significant changes in magnetic domain configurations upon voltage biasing were only observed in these gray regions. Furthermore, the voltage-induced magnetic domain separation was found to be bias polarity-dependent, with the gray regions expanding from the opposite sample edge when the applied voltage polarity was reversed. This polarity-dependent electrical control of magnetic domain configurations during the MIT switching opens alternative opportunities in memory applications for magnetic MIT switching materials.


  • Open Access

    Electrical Control of Magnetic Resonance in Phase Change Materials

    by Tian-Yue Chen, Haowen Ren, Nareg Ghazikhanian, Ralph El Hage, Dayne Y. Sasaki, Pavel Salev, Yayoi Takamura, Ivan K. Schuller, Andrew D. Kent

    Metal-insulator transitions (MITs) in resistive switching materials can be triggered by an electric stimulus that produces significant changes in the electrical response. When these phases have distinct magnetic characteristics, dramatic changes in the spin excitations are also expected. The transition metal oxide La0.7Sr0.3MnO3 (LSMO) is a ferromagnetic metal at low temperatures and a paramagnetic insulator above room temperature. When LSMO is in its metallic phase, a critical electrical bias has been shown to lead to an MIT that results in the formation of a paramagnetic resistive barrier transverse to the applied electric field. Using spin-transfer ferromagnetic resonance spectroscopy, we show that even for electrical biases less than the critical value that triggers the MIT, there is magnetic phase separation, with the spin-excitation resonances varying systematically with applied bias. Therefore, voltage-triggered MITs in LSMO can alter magnetic resonance characteristics, offering an effective method for tuning synaptic weights in neuromorphic circuits.


  • Open Access

    Local strain inhomogeneities during electrical triggering of a metal–insulator transition revealed by X-ray microscopy

    by Pavel Salev, Elliot Kisiel, Dayne Sasaki, Brandon Gunn, Wei He, Mingzhen Feng, Junjie Li, Nobumichi Tamura, Ishwor Poudyal, Zahirul Islam, et al.

    Electrical triggering of a metal–insulator transition (MIT) often results in the formation of characteristic spatial patterns such as a metallic filament percolating through an insulating matrix or an insulating barrier splitting a conducting matrix. When MIT triggering is driven by electrothermal effects, the temperature of the filament or barrier can be substantially higher than the rest of the material. Using X-ray microdiffraction and dark-field X-ray microscopy, we show that electrothermal MIT triggering leads to the development of an inhomogeneous strain profile across the switching device, even when the material does not undergo a pronounced, discontinuous structural transition coinciding with the MIT. Diffraction measurements further reveal evidence of unique features associated with MIT triggering including lattice distortions, tilting, and twinning, which indicate structural nonuniformity of both low- and high-resistance regions inside the switching device. Such lattice deformations do not occur under equilibrium, zero-voltage conditions, highlighting the qualitative difference between states achieved through increasing temperature and applying voltage in nonlinear electrothermal materials. Electrically induced strain, lattice distortions, and twinning could have important contributions in the MIT triggering process and drive the material into nonequilibrium states, providing an unconventional pathway to explore the phase space in strongly correlated electronic systems.


  • Domain nucleation across the metal-insulator transition of self-strained V2O3 films

    by Alexandre Pofelski, Sergio Valencia, Yoav Kalcheim, Pavel Salev, Alberto Rivera, Chubin Huang, Mohamad Assaad Mawass, Florian Kronast, Ivan K. Schuller, Yimei Zhu, et al.

    Bulk V2O3 features concomitant metal-insulator (MIT) and structural (SPT) phase transitions at TC∼160 K. In thin films, where the substrate clamping can impose geometrical restrictions on the SPT, the epitaxial relation between the V2O3 film and substrate can have a profound effect on the MIT. Here, we present a detailed characterization of domain nucleation and growth across the MIT in (001)-oriented V2O3 films grown on sapphire. By combining scanning electron transmission microscopy and photoelectron emission microscopy (PEEM), we imaged the MIT with planar and vertical resolution. We observed that upon cooling, insulating domains nucleate at the top of the film, where strain is lowest, and expand downwards and laterally. This growth is arrested at a critical thickness of 50 nm from the substrate interface, leaving a persistent bottom metallic layer. As a result, the MIT cannot take place in the interior of films below this critical thickness. However, PEEM measurements revealed that insulating domains can still form on a very thin superficial layer at the top interface. Our results demonstrate the intricate spatial complexity of the MIT in clamped V2O3, especially the strain-induced large variations along the c axis. Engineering the thickness-dependent MIT can provide an unconventional way to build out-of-plane geometry devices by using the persistent bottom metal layer as a native electrode.


  • Magnetoresistance anomaly during the electrical triggering of a metal-insulator transition

    by Pavel Salev, Lorenzo Fratino, Dayne Sasaki, Soumen Bag, Yayoi Takamura, Marcelo Rozenberg, Ivan K. Schuller

    Phase separation naturally occurs in a variety of magnetic materials and it often has a major impact on both electric and magnetotransport properties. In resistive switching systems, phase separation can be created on demand by inducing local switching, which provides an opportunity to tune the electronic and magnetic state of the device by applying voltage. Here we explore the magnetotransport properties in the ferromagnetic oxide La0.7Sr0.3MnO3 (LSMO) during the electrical triggering of an intrinsic metal-insulator transition (MIT), which produces volatile resistive switching. This switching occurs in a characteristic spatial pattern, i.e., the formation of a high-resistance barrier perpendicular to the current flow, enabling an electrically actuated ferromagnetic-paramagnetic-ferromagnetic phase separation. At the threshold voltage of the MIT triggering, both anisotropic and colossal magnetoresistances exhibit anomalies including a large increase in magnitude and a sign flip. Computational analysis revealed that these anomalies originate from the coupling between the switching-induced phase separation state and the intrinsic magnetoresistance of LSMO. This work demonstrates that driving the MIT material into an out-of-equilibrium resistive switching state provides the means for electrical control of the magnetotransport phenomena.