David Werbunat
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
David Werbunat has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
- Christian Waldschmidt
Ulm University
12 shared publications - Julian Aguilar
Ulm University
4 shared publications - Vinzenz Janoudi
Institute of Microwave Engineering, Ulm University, Ulm, Germany
4 shared publications - Benedikt Meinecke
Institute of Microwave Engineering, Ulm University, Ulm, Germany
3 shared publications - Benedikt Schweizer
Institute of Microwave Engineering, Ulm University, Ulm, Germany
3 shared publications - Juergen Hasch
Corporate Sector Research and Advance Engineering, Robert Bosch GmbH, Stuttgart, Germany
3 shared publications
Latest Publications
- Open Access
- 1 July 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Microwaves
- Vol. 6 (4) , 852-873
Coherent Radar Networks: Terminology, Synchronization, and Applications
In coherent radar networks, multiple radar sensors not only operate cooperatively but also facilitate coherent evaluation of signals from other spacially distant radar units. This overcomes the limitations of single radars, enabling extended apertures and new multistatic sensing geometries. Applications are manifold, ranging from network-based direction of arrival (DoA) estimation to bi-/multistatic synthetic aperture radar (SAR) and joint communication and sensing (JCAS). In recent years, this has led to significant research interest and the design of a wide range of radar networks and synchronization concepts. This paper introduces a unified terminology and a general signal model applicable to radar networks and bistatic radars. Building on this model, this work provides a detailed review of the main sources of synchronization errors and their impact on radar signal processing. The paper further surveys and categorizes synchronization strategies proposed in the literature to address these errors. It thereby enables both a structured comparison of current radar networks and the design of novel network and synchronization concepts for emerging applications. To illustrate the potential of these approaches, three applications are presented in detail: a novel DoA estimation strategy for distributed radar networks, UAV-borne bistatic SAR, and JCAS.
- 1 July 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Microwaves
- Vol. 6 (4) , 852-873
Open AccessCoherent Radar Networks: Terminology, Synchronization, and Applications
In coherent radar networks, multiple radar sensors not only operate cooperatively but also facilitate coherent evaluation of signals from other spacially distant radar units. This overcomes the limitations of single radars, enabling extended apertures and new multistatic sensing geometries. Applications are manifold, ranging from network-based direction of arrival (DoA) estimation to bi-/multistatic synthetic aperture radar (SAR) and joint communication and sensing (JCAS). In recent years, this has led to significant research interest and the design of a wide range of radar networks and synchronization concepts. This paper introduces a unified terminology and a general signal model applicable to radar networks and bistatic radars. Building on this model, this work provides a detailed review of the main sources of synchronization errors and their impact on radar signal processing. The paper further surveys and categorizes synchronization strategies proposed in the literature to address these errors. It thereby enables both a structured comparison of current radar networks and the design of novel network and synchronization concepts for emerging applications. To illustrate the potential of these approaches, three applications are presented in detail: a novel DoA estimation strategy for distributed radar networks, UAV-borne bistatic SAR, and JCAS.
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Radar Systems
- Vol. 4, 1801-1816
Low-Altitude Wide-Swath Single-Pass SAR Interferometry for UAS-Borne Radar
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Radar Systems
- Vol. 4, 1801-1816
Low-Altitude Wide-Swath Single-Pass SAR Interferometry for UAS-Borne Radar
- Open Access
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Radar Systems
- Vol. 4, 1318-1333
Machine Learning-Based Synchronization for Uncoupled Digital Radar Networks
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Radar Systems
- Vol. 4, 1318-1333
Open AccessMachine Learning-Based Synchronization for Uncoupled Digital Radar Networks
- Open Access
- 14 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Microwaves
- Vol. 4 (3) , 459-472
Uncoupled Digital Radars Creating a Coherent Sensor Network
Radar networks offer the possibility to overcome the limitations of single sensors. However, without coherent signal processing, the full potential of radar networks cannot be exploited. Therefore, the synchronization of independent radar sensors is crucial in order to mitigate performance degradation due to frequency deviations of uncoupled reference oscillators. Systematically derived synchronization criteria for coupling-induced errors such as sampling frequency offset (SFO), carrier frequency offset (CFO) and symbol timing offset (STO) of uncoupled orthogonal frequency-division multiplexing (OFDM) radar sensors enable to determine hardware specifications, such as the required reference oscillator frequency stability. This aids in the design of digital radar networks and ensures error-free signal processing in advance. The concept of deriving said criteria is applicable to other modulation types used for digital radar sensors. Additionally, signal processing-based error estimation and correction methods are presented. By exploiting standard radar images, namely range profiles and range-Doppler images, the proposed methods estimate and correct any occurring SFO, CFO and STO. Furthermore, by applying the signal processing synchronization methods, they allow for a more lenient radar network design. Measurements using a 77 GHz digital radar demonstrator verify the derived criteria and error estimation and correction methods.
- 14 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Microwaves
- Vol. 4 (3) , 459-472
Open AccessUncoupled Digital Radars Creating a Coherent Sensor Network
Radar networks offer the possibility to overcome the limitations of single sensors. However, without coherent signal processing, the full potential of radar networks cannot be exploited. Therefore, the synchronization of independent radar sensors is crucial in order to mitigate performance degradation due to frequency deviations of uncoupled reference oscillators. Systematically derived synchronization criteria for coupling-induced errors such as sampling frequency offset (SFO), carrier frequency offset (CFO) and symbol timing offset (STO) of uncoupled orthogonal frequency-division multiplexing (OFDM) radar sensors enable to determine hardware specifications, such as the required reference oscillator frequency stability. This aids in the design of digital radar networks and ensures error-free signal processing in advance. The concept of deriving said criteria is applicable to other modulation types used for digital radar sensors. Additionally, signal processing-based error estimation and correction methods are presented. By exploiting standard radar images, namely range profiles and range-Doppler images, the proposed methods estimate and correct any occurring SFO, CFO and STO. Furthermore, by applying the signal processing synchronization methods, they allow for a more lenient radar network design. Measurements using a 77 GHz digital radar demonstrator verify the derived criteria and error estimation and correction methods.
- Open Access
- 7 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 72 (8) , 4932-4944
On the Synchronization of Uncoupled Multistatic PMCW Radars
Radar networks and multistatic synthetic aperture radars (SARs) allow overcoming the limitations of single radar sensors. However, a good synchronization of the radar sensors is crucial to avoid performance loss due to phase noise and frequency offsets. While this is usually done via cables or dedicated synchronization signals, digital radars allow for new techniques. This work proposes a new concept for the synchronization of phase-modulated continuous wave (PMCW) radars. The synchronization is performed solely by digital signal processing on the receiver side, adapting techniques known from digital communications. It mitigates effects caused by incoherency, which are. These are phase noise, carrier LO frequency offsets and phase deviations of the local oscillator (LO), and sampling frequency offsets. At first, the impact of these effects is mathematically derived and analyzed in detail. Then, the proposed synchronization concept is presented, and its performance is thoroughly evaluated. Very good results are obtained not only in simulations but also in measurements with a 77-GHz radar demonstrator.
- 7 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 72 (8) , 4932-4944
Open AccessOn the Synchronization of Uncoupled Multistatic PMCW Radars
Radar networks and multistatic synthetic aperture radars (SARs) allow overcoming the limitations of single radar sensors. However, a good synchronization of the radar sensors is crucial to avoid performance loss due to phase noise and frequency offsets. While this is usually done via cables or dedicated synchronization signals, digital radars allow for new techniques. This work proposes a new concept for the synchronization of phase-modulated continuous wave (PMCW) radars. The synchronization is performed solely by digital signal processing on the receiver side, adapting techniques known from digital communications. It mitigates effects caused by incoherency, which are. These are phase noise, carrier LO frequency offsets and phase deviations of the local oscillator (LO), and sampling frequency offsets. At first, the impact of these effects is mathematically derived and analyzed in detail. Then, the proposed synchronization concept is presented, and its performance is thoroughly evaluated. Very good results are obtained not only in simulations but also in measurements with a 77-GHz radar demonstrator.
- Open Access
- 30 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 72 (5) , 3247-3259
Multichannel Repeater for Coherent Radar Networks Enabling High-Resolution Radar Imaging
Coherent radar networks allow for spanning very large apertures that include all sensors with their subapertures in the network, resulting in very good angular resolution. However, as a radar network typically has a sparse array, its performance depends on the flexibility of the antenna and network node placement. Thus, in this work, a new type of radar network is presented, allowing for a highly flexible network and array design and providing an excellent performance in direction-of-arrival (DoA) estimation. This is reached by using multichannel repeaters (MCRs) in combination with a single multiple-input multiple-output (MIMO) radar. The multichannel repeaters (MCRs) receives the radar’s signal via a line-of-sight path, and then re-transmits it via multiple transmit channels, each with a dedicated mixer used for multiplexing. To show the feasibility and the performance of this concept, a 77-radar network consisting of a digital $4\ttimes4$ multiple-input multiple-output (MIMO) radar and two four-channel MCRs is presented. It is designed following network array design recommendations mathematically derived in this work and combined with an adapted signal processing and network-based direction-of-arrival (DoA) estimation. The high performance of the system is demonstrated not only via systematic measurements in an anechoic chamber, but also in various automotive scenarios including multiple road users.
- 30 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 72 (5) , 3247-3259
Open AccessMultichannel Repeater for Coherent Radar Networks Enabling High-Resolution Radar Imaging
Coherent radar networks allow for spanning very large apertures that include all sensors with their subapertures in the network, resulting in very good angular resolution. However, as a radar network typically has a sparse array, its performance depends on the flexibility of the antenna and network node placement. Thus, in this work, a new type of radar network is presented, allowing for a highly flexible network and array design and providing an excellent performance in direction-of-arrival (DoA) estimation. This is reached by using multichannel repeaters (MCRs) in combination with a single multiple-input multiple-output (MIMO) radar. The multichannel repeaters (MCRs) receives the radar’s signal via a line-of-sight path, and then re-transmits it via multiple transmit channels, each with a dedicated mixer used for multiplexing. To show the feasibility and the performance of this concept, a 77-radar network consisting of a digital $4\ttimes4$ multiple-input multiple-output (MIMO) radar and two four-channel MCRs is presented. It is designed following network array design recommendations mathematically derived in this work and combined with an adapted signal processing and network-based direction-of-arrival (DoA) estimation. The high performance of the system is demonstrated not only via systematic measurements in an anechoic chamber, but also in various automotive scenarios including multiple road users.
- 30 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 72 (1) , 421-434
Adaptive Compensation of Hardware Impairments in Digitally Modulated Radars Using ML-Based Behavioral Models
This work proposes novel compensation approaches for full radar transceiver (TRX) self-calibration of the IQ modulator, power amplifier (PA), and IQ demodulator without the need of dynamic channel conditions, a local oscillator (LO) frequency offset, or additional hardware. The methods employ behavioral models based on neural networks, which are trained with the radar sensor itself. Three different compensation methods at transmitter (TX), receiver (RX), as well as a distributed approach are presented, validated, and compared using a 78-GHz orthogonal frequency-division multiplex (OFDM) radar and computer simulations. The proposed distributed approach is shown to increase the radar’s spurious-free dynamic range (SFDR) by 17.6 dB compared to an uncompensated case and by 8.5 dB in comparison to high input back-off (IBO) operation. Furthermore, among the studied compensation methods in this work, the distributed approach simultaneously offers additional significant benefits: the highest signal-to-noise ratio (SNR) for all targets in the scene and reduced out-of-band (OOB) emission.
- 30 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 72 (1) , 421-434
Adaptive Compensation of Hardware Impairments in Digitally Modulated Radars Using ML-Based Behavioral Models
This work proposes novel compensation approaches for full radar transceiver (TRX) self-calibration of the IQ modulator, power amplifier (PA), and IQ demodulator without the need of dynamic channel conditions, a local oscillator (LO) frequency offset, or additional hardware. The methods employ behavioral models based on neural networks, which are trained with the radar sensor itself. Three different compensation methods at transmitter (TX), receiver (RX), as well as a distributed approach are presented, validated, and compared using a 78-GHz orthogonal frequency-division multiplex (OFDM) radar and computer simulations. The proposed distributed approach is shown to increase the radar’s spurious-free dynamic range (SFDR) by 17.6 dB compared to an uncompensated case and by 8.5 dB in comparison to high input back-off (IBO) operation. Furthermore, among the studied compensation methods in this work, the distributed approach simultaneously offers additional significant benefits: the highest signal-to-noise ratio (SNR) for all targets in the scene and reduced out-of-band (OOB) emission.
- 26 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 33 (9) , 1397-1400
Automotive Radar Interference Mitigation by Subtraction of the Interference Component
Mutual interference has become one of the most important challenges for near-future automotive radar systems. This letter proposes a new mitigation scheme where the target information can be recovered even if a large number of samples are affected. The suggested approach considers that by proper adjustment or compensation of the interference signal, the clean target signal component can be retrieved after subtracting the compensated interference signal from the corrupted signal. The effectiveness of the mitigation approach is verified using simulations and measured radar data.
- 26 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 33 (9) , 1397-1400
Automotive Radar Interference Mitigation by Subtraction of the Interference Component
Mutual interference has become one of the most important challenges for near-future automotive radar systems. This letter proposes a new mitigation scheme where the target information can be recovered even if a large number of samples are affected. The suggested approach considers that by proper adjustment or compensation of the interference signal, the clean target signal component can be retrieved after subtracting the compensated interference signal from the corrupted signal. The effectiveness of the mitigation approach is verified using simulations and measured radar data.
- 6 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Components Letters
- Vol. 32 (10) , 1251-1254
Near-Field Compensation for Coherent Radar Networks
With radar networks, the resolution of critical radar parameters such as Doppler and angle can be improved compared to a single radar sensor. As the network’s aperture is considerably larger than that of a single radar, a much higher angular resolution is achieved. However, with a large aperture, range-dependent phase deviations, that is, near-field effects, occur and affect the angle estimation. In this work, these near-field effects are evaluated exemplarily for a coherent network. Furthermore, a new strategy to compensate for those network near-field effects is proposed and demonstrated based on measurements. The benefits of the near-field compensation are emphasized by comparing the network’s angle-estimation capabilities with and without compensated near-field effects.
- 6 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Components Letters
- Vol. 32 (10) , 1251-1254
Near-Field Compensation for Coherent Radar Networks
With radar networks, the resolution of critical radar parameters such as Doppler and angle can be improved compared to a single radar sensor. As the network’s aperture is considerably larger than that of a single radar, a much higher angular resolution is achieved. However, with a large aperture, range-dependent phase deviations, that is, near-field effects, occur and affect the angle estimation. In this work, these near-field effects are evaluated exemplarily for a coherent network. Furthermore, a new strategy to compensate for those network near-field effects is proposed and demonstrated based on measurements. The benefits of the near-field compensation are emphasized by comparing the network’s angle-estimation capabilities with and without compensated near-field effects.
- Open Access
- 30 September 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Microwaves
- Vol. 1 (4) , 950-961
Mutual Interference of Automotive OFDM Radars—Analysis and Countermeasures
Due to its noise-like signal property, digital orthogonal frequency-division multiplexing (OFDM) radars are often assumed to be robust against interference. While a lot of research has been carried out for interference between different modulation schemes, the mechanisms of interference from OFDM to OFDM radars have been barely addressed. This paper provides a thorough analysis of mutual OFDM to OFDM interference based on radar measurements using a 4x4 77 GHz multiple-input multiple-output (MIMO) OFDM radar prototype. The effects of interference are described both qualitatively and quantitatively for cyclic-prefix and stepped-carrier OFDM. Second, it is shown that conventional mitigation methods in the spectrogram are not suitable due to the random coding of cyclic-prefix OFDM. As an alternative, the application of adaptive beamforming is proposed and two realization possibilities are provided. Finally, new mitigation strategies in the modulation domain are proposed. They allow to shape interference to specific range-Doppler cells, yielding an interference-free range-velocity map for the area of interest. Additionally, the method may be used as the basis to enable simple conventional interference mitigation strategies.
- 30 September 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Microwaves
- Vol. 1 (4) , 950-961
Open AccessMutual Interference of Automotive OFDM Radars—Analysis and Countermeasures
Due to its noise-like signal property, digital orthogonal frequency-division multiplexing (OFDM) radars are often assumed to be robust against interference. While a lot of research has been carried out for interference between different modulation schemes, the mechanisms of interference from OFDM to OFDM radars have been barely addressed. This paper provides a thorough analysis of mutual OFDM to OFDM interference based on radar measurements using a 4x4 77 GHz multiple-input multiple-output (MIMO) OFDM radar prototype. The effects of interference are described both qualitatively and quantitatively for cyclic-prefix and stepped-carrier OFDM. Second, it is shown that conventional mitigation methods in the spectrogram are not suitable due to the random coding of cyclic-prefix OFDM. As an alternative, the application of adaptive beamforming is proposed and two realization possibilities are provided. Finally, new mitigation strategies in the modulation domain are proposed. They allow to shape interference to specific range-Doppler cells, yielding an interference-free range-velocity map for the area of interest. Additionally, the method may be used as the basis to enable simple conventional interference mitigation strategies.