FKFabian Kranert

Fabian Kranert

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Fabian Kranert has a total of 15 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Laser-machined, kilowatt-class cladding light strippers with stripping efficiencies > 37 dB

    by Nils Haverland, Finn Salhoff, Fabian Kranert, Joerg Neumann, Dietmar Kracht

    Cladding light strippers are a crucial component for fiber-based laser and amplifier systems, stripping unabsorbed pump light behind the active fiber. Laser-machining presents an effective alternative to chemical etching in the production of high-power cladding light strippers. Here, we present improvements to laser-machined, microstructured cladding light strippers, which achieve cladding light attenuation up to 37.3 dB on a length of just 60 mm. We tested the high-power stripping capability of a cladding light stripper, achieving a stripped cladding light power of 1.2 kW. The result was limited by the available power. The cladding light strippers were designed by utilizing raytracing simulations to optimize the microstructure on the fiber towards homogenized stripping and increased cladding light attenuation. Afterwards, the most promising results were transferred to manufacturing and characterized. The availability of high-power, high attenuation microstructured cladding light strippers can help to improve future laser systems, possibly foregoing the need for chemical etching.

  • Open Access

    Side-fused signal–pump combiner and microstructured cladding light stripper for triple-clad fibers

    by Eike Brockmüller, Nils Haverland, Daniil Antonov, Dominic Zentgraf, Fabian Kranert, Roland Lachmayer, Jörg Neumann, Dietmar Kracht

    Triple-clad fibers are, in particular, used in thulium- and holmium-doped fiber lasers and amplifiers to increase the threshold for critical fiber damage, e.g., caused by absorption in the coating. This would allow for further power scaling. However, essential fiber-based components such as side-fused signal–pump combiners and cladding light strippers are not available for this fiber type. As the fiber design prevents the required access to the inner pump cladding, it hinders efficient component manufacturing. Here, we present manufacturing processes involving CO2 laser-based ablation that enable the production of these components. For the manufactured signal–pump combiner with a 14/400/480-μm triple-clad fiber and up to four 135/155-μm pump input fibers, a pump coupling efficiency of 95.5%, a signal loss of 0.2 dB, and a signal-to-pump isolation of 34 dB were achieved. We confirm by ray tracing simulation that most of the pump power is coupled into the inner cladding of the triple-clad fiber. The cladding light stripper, manufactured out of the same fiber sample, achieved a cladding light attenuation of 20.8 dB, whereas no significant signal loss was detected. The availability of these components enables monolithic laser and amplifier setups with triple-clad fibers and supports their power scaling with high beam quality.

  • Open Access

    Polymer-based 3D printing of function-integrated optomechanics – design guidelines and system evaluation

    by Fabian Kranert, Moritz Hinkelmann, Roland Lachmayer, Jörg Neumann, Dietmar Kracht

    Purpose: This study aims to extend the known design guidelines for the polymer-based fused filament fabrication (FFF) 3D printing process with the focus on function-integrated components, specifically optomechanical parts. The potential of this approach is demonstrated by manufacturing function-integrated optomechanics for a low-power solid-state laser system. Design/methodology/approach: For the production of function-integrated additively manufactured optomechanics using the FFF process, essential components and subsystems have been identified for which no design guidelines are available. This includes guidelines for integrating elements, particularly optics, into a polymer structure as well as guidelines for printing functional threads and ball joints. Based on these results, combined with prior research, a function-integrated low-power solid-state laser optomechanic was fabricated via the FFF process, using a commercial 3D printer of the type Ultimaker 3. The laser system's performance was assessed and compared to a reference system that employed commercial optomechanics, additionally confirming the design guidelines derived from the study. Findings: Based on the design goal of function integration, the existing design guidelines for the FFF process are systematically extended. This success is demonstrated by the fabrication of an integrated optomechanic for a solid-state laser system. Practical implications: Based on these results, scientists and engineers will be able to use the FFF process more extensively and benefit from the possibilities of function-integrated manufacturing. Originality/value: Extensive research has been published on additive manufacturing of optomechanics. However, this research often emphasizes only cost reduction and short-term availability of components by reprinting existing parts. This paper aims to explore the capabilities of additive manufacturing in the production of function-integrated components to reduce the number of individual parts required, thereby decreasing the workload for system assembly and leading to an innovative production process for optical systems. Consequently, where needed, it provides new design guidelines or extends existing ones and verifies them by means of test series.


  • Additively Manufactured Polymer Optomechanics and Their Application in Laser Systems

    by Fabian Kranert, Jana Budde, Moritz Hinkelmann, Roland Lachmayer, Jörg Neumann, Dietmar Kracht


  • 3D fabrication and characterization of polymer-imprinted optics for function-integrated, lightweight optomechanical systems

    by Fabian Kranert, Jana Budde, Moritz Hinkelmann, Jörg Neumann, Dietmar Kracht, Roland Lachmayer

    Nowadays, customized optomechanics for complex optical setups are increasingly manufactured additively using the polymer-based process of fused filament fabrication. In this article, a kinematic polymer mirror holder is demonstrated, in which the mirror is imprinted and thus fixed against misalignment. Furthermore, the necessary spring system and ball joint are manufactured in a single printing process. This mirror holder can then be embedded into an also printed cage system. Mirror mounts made of different polymers are examined and compared with each other. The mechanical stress induced into the imprinted optic is determined. Regarding the 3D-printed spring system, the angular alignment range as well as the load limits are defined. The reproducibility of the mirror's angular position and the long-term stability together with the influence of thermal cycling is determined. The results will be compared with a conventional, subtractive manufactured metallic optomechanic.