SGSergio Andrés Gómez

Sergio Andrés Gómez

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Sergio Andrés Gómez has a total of 22 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Análisis Comparativo de Metodologías para la Predicción de Propiedades Mecánicas de Materiales Compuestos

    by Sergio Gómez

    Accurately predicting the mechanical properties of composite materials is a significant technical challenge because of their complex internal structure and the wide variety of possible matrix-reinforcement combinations. This study aims to analyze and compare the primary methodologies employed for this purpose, categorizing them based on their approach. A systematic review of the literature was conducted to identify and classify the strategies used into four categories: experimental, analytical, numerical (particularly the finite element method), and artificial intelligence–based. A comparative analysis of the benefits and limitations of these methodologies was then performed, considering criteria such as accuracy, cost, flexibility, technical requirements, and predictive capacity. The results show that although experimental tests offer high fidelity, they are limited in terms of cost and replicability. Analytical models are notable for their simplicity and speed, though they tend to lose accuracy in complex systems. Numerical simulations allow for the representation of heterogeneous structures in great detail but require significant computational resources. Finally, artificial intelligence–based approaches demonstrate great potential for managing large volumes of data and recognizing complex patterns; however, their effectiveness largely depends on the quality and representativeness of the available data

  • Open Access

    Análisis Comparativo de Metodologías para la Predicción de Propiedades Mecánicas de Materiales Compuestos

    by Sergio Gómez

    La predicción precisa de las propiedades mecánicas de los materiales compuestos representa un desafío técnico significativo, debido a su compleja estructura interna y a la amplia variedad de combinaciones posibles entre matrices y refuerzos. Este trabajo tiene como objetivo analizar y comparar las principales metodologías empleadas para este propósito, agrupándolas según su enfoque. El estudio se basó en una revisión sistemática de la literatura, mediante la cual se identificaron y clasificaron las estrategias utilizadas en cuatro categorías: experimentales, analíticas, numéricas (particularmente el método de elementos finitos) y basadas en inteligencia artificial. Posteriormente, se realizó un análisis comparativo de sus beneficios y limitaciones, considerando criterios como precisión, costo, flexibilidad, requerimientos técnicos y capacidad predictiva. Los resultados muestran que, si bien los ensayos experimentales ofrecen alta fidelidad, presentan limitaciones en términos de costos y replicabilidad. Los modelos analíticos se destacan por su simplicidad y rapidez, aunque tienden a perder exactitud en sistemas más complejos. Las simulaciones numéricas permiten representar estructuras heterogéneas con gran detalle, pero demandan recursos computacionales significativos. Finalmente, los enfoques basados en inteligencia artificial demuestran un alto potencial para gestionar grandes volúmenes de datos y reconocer patrones complejos, aunque su eficacia depende en gran medida de la calidad y representatividad de los datos disponibles.

  • Open Access

    Evaluation of the Application of Micromechanical Models in the Estimation of the Modulus of Elasticity for Biocomposites Reinforced with Fique Fiber Braided Ropes

    by S. Gómez S

    This study focuses on the estimation of the longitudinal and transverse moduli of elasticity of biocomposites reinforced with fique fiber in braided-rope configuration and a natural rubber matrix, using semi-empirical micromechanical models. First, both the fique fiber rope and the natural rubber matrix were mechanically characterized. Using the obtained data, the micromechanical models of the Rule of Mixtures, Halpin-Tsai, Chamis, Hopkins & Chamis, Nielsen, Miravete, Jones, and Yung Fu were applied to calculate the corresponding moduli. Subsequently, biocomposites were manufactured with fique fibers oriented at 0° and 90°, with the fiber volumefraction varied. The biocomposites were characterized to determine the longitudinal and transverse moduli. The comparison of results showed that Miravete´s and Yun Fu´s micromechanical models provided the best fits for these materials.

  • Open Access

    Evaluation of polymeric coatings applied to a natural fique fiber mesh of a water harvesting fog catcher system

    by Sergio Andrés Gómez, Edwin Córdoba Tuta

    One of society's priority needs is acquiring fresh water due to high contamination levels and limited access in areas where this valuable resource is scarce. Non-traditional methods of water acquisition, such as fog catcher systems, are increasingly relevant because of their low cost and versatility. These systems use collection meshes to condense fog microdroplets. The water then undergoes filtration, adsorption, and disinfection processes to ensure its potability. Unfortunately, the materials commonly used in fog catcher meshes are synthetic, making them resistant to degradation. Consequently, natural fibers present a viable alternative for their replacement. However, the hydrophobicity of natural fibers is low, which results in limited water capture. This necessitates the development of new solutions, such as coatings, to enhance water capture efficiency. This article presents an evaluation of various polymeric coatings applied to natural fique fiber meshes installed in fog catchers, focusing on the impact of these coatings on water capture efficiency. Additionally, a mechanical and morphological characterization of the coated meshes was performed to assess their mechanical properties and adhesion. Mechanical characterization was conducted using tensile testing, which revealed improved properties in the epoxy-coated fique mesh system. Morphological analysis, using scanning electron microscopy, showed better adhesion between the epoxy and polyester resins and the natural fiber. Water capture tests conducted both in the field and in the laboratory demonstrated that the fique-epoxy coating is the most effective, increasing water uptake by 124.4% compared to uncoated fique fiber.

  • Open Access

    Fabricación y caracterización morfológica, mecánica y dinámica de un cuadricóptero elaborado con material compuesto de fibra de fique

    by Sergio A. Gomez, Edwin J. Córdoba, Alfonso Santos

    El presente estudio describe la fabricación de un dron cuadricóptero elaborado en material compuesto reforzado con fibra de fique, el cual fue caracterizado morfológica, mecánica y dinámicamente. El marco del cuadricóptero se fabricó utilizando 6 capas de fique (35.4% del peso) y una matriz de poliéster. La electrónica y el sistema de control se basaron en el uso de la arquitectura Arduino Nano. El análisis morfológico por microscopia electrónica mostró delaminación de la matriz y una adhesión media resina-fibra. La caracterización mecánica se realizó en dirección longitudinal y transversal obteniéndose un esfuerzo máximo de tensión de 32.20 MPa y 25.72 MPa respectivamente. La mayor amplitud de vibración se da a la frecuencia de operación de los motores, siendo esta 89 Hz. En conclusión, el dron puede entrar en resonancia ya que para llegar a la frecuencia de operación de los motores se debe excitar la primera frecuencia natural del marco.


  • Open Access

    Análisis morfológico de la afectación microestructural de material biocompuesto reforzado con fibra de fique debido a corte con herramienta convencional, láser y chorro de agua

    by Sergio Andrés Gómez, Edwin Cordoba, Victor Hugo Cuellar, Roger Peña Meza

    Thanks to their properties, the use of composite materials in industrial applications has increased in recent decades, especially those with natural fiber reinforcements due to their lower environmental impact; however, one of the great challenges presented by this type of material is to shape them by cutting as their surface integrity can be compromised. In the present work, morphological analysis is carried out on a composite material with fique fiber, evaluating the superficial affectation by cutting made with a conventional tool, laser, and water jet. The material was made with six layers of fique fiber and polyester resin. The morphological study was carried out through scanning electron microscopy, where high defects were evidenced with the conventional tool, an affectation to the matrix in laser cutting, and a low surface impact using the water jet.


  • Open Access

    Manufacture of student chair in composite material reinforced with fique fiber

    by Sergio Andrés Gómez, Edwin Cordoba, Christian Vega Mesa, Sergio Gómez Becerra

    The use of natural fibers as reinforcement for composite materials is on the rise due to the need to reduce environmental damage and manufacture sustainable products. One of the fibers used for this purpose is fique fiber. This article describes the manufacture of a student chair with fique fiber-reinforced composite material. To choose the amount of reinforcement to be used in the elaboration of the chair, the mechanical characterization of several composites with different percentages of the fiber was carried out, where it was found that both the flexural and tensile properties increased with a higher insertion of fique. The selected material was analyzed morphologically with optical microscopy, finding that there was good adhesion between the fiber and the matrix. A simulation with finite elements showed that the chair would resist a load of 100 kg. The student chair was manufactured using the Hand Lay Up technique with material composed of fique fiber and polyester resin.


  • Open Access

    Análisis modal de material compuesto de resina bioepoxy/fibra de fique

    by Sergio Gómez, Bladimir Ramón, Rolando Guzmán

    In this work, a modal analysis was applied on a bioepoxy/ fi ber composite material using the simulation (Finite Elements), experimentation and analytical modeling knowing the deviation between each of the methods of the solution. The material was elaborated using a bioepoxy resin and fi que fi bers in the distribution of weave under the technique of manufacturing the infusion vacuum. Tensile tests were performed on the composite material according to ASTM D3039 / D3039M to obtain the mechanical properties that allow the development of the mathematical model and the simulation and analysis of scanning electron microscopy to observe the adhesion between the fi ber and the matrix. The experimental modal analysis was performed by measuring the frequency response (FRF) under ISO 7626-2. The Euler-Bernoulli equation was used for analytical modeling, while the ANSYS fi nite element software was used for the simulation. It concludes that for the fi rst modes of material vibration obtained results close between the three methods, however for the third mode the error increases by the interaction between the matrix and the fi ber and the eff ects of the rotation of the cross-section of the test item.