DUDmytro Usenko

Dmytro Usenko

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Dmytro Usenko has a total of 29 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Feasibility of Earth-Bermed Surface-Level Fallout Shelters

    by A. Hasenko, P. Semko, I. Ostapov, D. Ovsii, D. Usenko

    This study provides a comprehensive scientific and technical justification for the rationality of designing and constructing above-ground and semi-recessed civil protection facilities utilizing external earth-berming technology as an effective alternative to fully submerged shelters. Particular emphasis is placed on compliance with mandatory inclusivity and barrier-free environment requirements (pursuant to DBN V.2.2-40:2018). Since protective structures serve as primary collective defense assets, accessibility must be guaranteed for all population groups, including persons with reduced mobility (mobility-impaired groups, MIG).Positioning the structure at surface grade or with minimal embedment enables direct entry from the pavement level. This eliminates the need for high-cost, technically complex elevators, lifts, or extensive internal ramp systems. Such a configuration not only streamlines architectural and planning solutions and optimizes spatial dimensions, but also critically reduces shelter occupancy time during alerts and facilitates rapid evacuation during emergencies.The paper analyzes the technical advantages of bermed structures, including:Mitigation of Debris Loading: Absence of loads from the potential collapse of surrounding buildings.Pressure Reduction: A two-fold reduction in design blast overpressure when situated above the water table.Infrastructure Optimization: Simplified engineering networks and drainage systems.Based on a comparative calculation developed for a model facility with a capacity of 500 persons, shifting from a fully submerged variant to an above-ground bermed design yields a direct economic benefit of 10–20% of the total project cost, equivalent to UAH 6–12 million. Special attention is devoted to structural solutions for “through-type” entrances and pressure-relief elements, which further halve the load on the entrance group.Furthermore, above-ground construction allows for the integration of the protective facility into the local topography by repurposing the bermed surface for playgrounds or recreational zones, addressing land scarcity in dense urban environments. Consequently, this study proposes a holistic approach to designing modern dual-purpose shelters that harmonize high protective capacity, full inclusivity, and techno-economic feasibility.

  • Open Access

    РЕСУРСООЩАДНІ РІШЕННЯ З УПРАВЛІННЯ ВІДНОВЛЕННЯМ ПОШКОДЖЕНИХ ПОЗАПРОЄКТНИМИ ВПЛИВАМИ ЦЕГЛЯНИХ БУДІВЕЛЬ СТІНОВОЇ КОНСТРУКТИВНОЇ СХЕМИ

    by Д. В. Усенко, А. О. Кудінова

    У будівлях стінової конструктивної схеми на відміну від каркасних будівель, де основні зусилля сприймають рамні чи ферменні системи, руйнівний вплив концентрується на масивних протяжних площинах, що безпосередньо несуть вертикальні й горизонтальні навантаження. Воєнні дії актуалізують необхідність перегляду нормативних підходів до проєктування будівель стінової конструктивної схеми. У статті розглянуто проблематику відновлення пошкоджених позапроєктними впливами будівель стінової конструктивної схеми з дрібнорозмірних елементів в умовах воєнних уражень. На основі аналізу характерних механізмів руйнування цегляної кладки (наскрізні пробоїни, вертикальні та похилі тріщини від ударних хвиль, комбіновані ураження, втрата кутових вузлів і просторової жорсткості) визначено системні особливості втрати несучої здатності стін, простінків і колон громадських будівель. Обґрунтовано необхідність переходу від локальних ремонтних рішень до комплексного управління відновленням з урахуванням технічного стану, залишкової міцності та сценаріїв подальшої експлуатації об’єкта. Так як стандарти, що базуються на звичайних експлуатаційних впливах, не враховують масштаби динамічних навантажень сучасних бойових дій, запропоновано ресурсоощадний підхід до відновлення, інтегрований у концепцію управління життєвим циклом об’єкта нерухомості, з урахуванням техніко-економічного обґрунтування, управління ризиками та застосування стандартів проєктного менеджменту. Показано, що ефективність реконструкції залежить від поєднання інженерного аналізу механізмів руйнування з економічними критеріями доцільності (NPV, IRR, LCC) та стратегічним плануванням відбудови. Отримані результати є основою для розроблення адаптивних конструктивних і управлінських стратегій підвищення стійкості будівель із дрібнорозмірних елементів у зонах підвищених ризиків.

  • Open Access

    АНАЛІЗ ПОШКОДЖЕНЬ ПОЗАПРОЄКТНИМИ ВПЛИВАМИ БУДІВЕЛЬ І СПОРУД ТА ТЕХНОЛОГІЙ ЇХ ВІДНОВЛЕННЯ

    by А. В. Гасенко, П. О. Семко, Д. М. Овсій, Д. В. Усенко

    Стаття присвячена актуальній науково-технічній проблемі сьогодення дослідження технічного стану будівель та споруд, пошкоджених унаслідок позапроєктних впливів, а також розробка технологій відновлення конструктивної міцності пошкоджених елементів. Розглянуто існуючі у відкритому доступі публікації, підготовлені українськими вченими за останні п’ять років, щодо огляду пошкоджень позапроєктними впливами будівель та споруд із викладенням технологій їх відновлення. Зазвичай дослідження, викладені в окремих публікаціях, стосуються пошкоджень внаслідок воєнних дій, а саме впливу вибухової хвилі, попадання засобів ураження первинної (наприклад осколків) та вторинної (частин зруйнованих будівельних конструкцій) дії, що рухаються на великій швидкості, термічного впливу, вібрацій тощо, окремих типів будівель чи споруд, як от цегляних, каркасних, панельних, об’ємно-блочних будівель чи антенних, мостових, силосних споруд та інше. У разі комплексного ремонту необхідно відновити як фізико-механічні показники, так і геометричні параметри конструкцій з подальшим їх підсиленням. У зв’язку з цим, пошук, дослідження та розробка методів відновлення експлуатаційної придатності пошкоджених будівельних конструкцій вимагають комплексного підходу як до вирішення великої кількості питань, так і до формування рішень для розв'язання конкретного завдання. Ці рішення мають враховувати не лише ефективність відновлення, а й безпеку для людей, які працюють чи проживають на об'єктах, що підлягають відновленню. Розробка ефективних методів відновлення експлуатаційної придатності пошкоджених будівельних конструкцій можлива лише на основі проведення дослідження стану пошкоджених та зруйнованих будівель на конкретних прикладах.

  • Оцінка технічного стану захисної споруди з визначенням її відповідності протирадіаційному укриттю

    by А. В. Гасенко, Д. М. Овсій, П. О. Семко, Д. В. Усенко

    Ядерна безпека є одним з важливих питань для будь-якої країни. Умови повномасштабної війни в Україні різко загострили питання реальної захисної спроможності укриттів, які масово облаштовують у підвальних і цокольних приміщеннях без належної перевірки відповідності властивостям захисних споруд цивільного захисту, зокрема і протирадіаційних укриттів. Навіть наявні протирадіаційні укриття, споруджені ще в минулому столітті, потребують перегляду відповідності сучасним вимогам щодо несучої здатності та послаблення іонізуючого випромінювання. У статті на конкретному об’єкті показано, як системна оцінка дозволяє встановити фактичну відповідність / невідповідність підвального приміщення будівлі ознакам протирадіаційного укриття за ДБН В.2.2-5:2023. Методика оцінки охоплювала натурне обстеження, аналіз об’ємно-планувальних рішень й інженерних систем, перевірні розрахунки несучої здатності конструкцій, визначення коефіцієнта послаблення іонізуючого випромінювання. Результати засвідчили низку критичних невідповідностей: відсутність механічної вентиляції, захисних дверей та аварійних виходів; дефіцит площі основних приміщень, обов’язкових допоміжних приміщень і санітарно-гігієнічного обладнання; прокладання мереж без захисних футлярів. За розрахунками несуча здатність плит перекриття і стін є недостатньою на повне еквівалентне навантаження у 22 рази та 1,5 раза відповідно, а коефіцієнт послаблення випромінювання у сотні разів нижчий за нормативний; навіть після первинних заходів (влаштування тамбурів, закладення прорізів, зовнішнього обвалування стін) показник залишається у 8–20 разів меншим за вимогу. Практичне значення роботи полягає в демонстрації проведення перевірок, що дозволяє органам місцевого самоврядування, балансоутримувачам та проєктантам ідентифікувати «вузькі місця» типових підвальних укриттів й обґрунтовано планувати підсилення конструкцій і комплектацію інженерних систем до досягнення нормативної відповідності.


  • Open Access

    СКІНЧЕННО-ЕЛЕМЕНТНЕ МОДЕЛЮВАННЯ ПІДСИЛЕНИХ СКЛАДНО-НАВАНТАЖЕНИХ ДЕФОРМОВАНИХ ЦЕГЛЯНИХ КОЛОН БУДІВЕЛЬ З МЕТОЮ ВЛАШТУВАННЯ ВБУДОВАНИХ СПОРУД ЦИВІЛЬНОГО ЗАХИСТУ ІЗ СТАЛЕЗАЛІЗОБЕТОНУ

    by Д. В. Усенко, М. В. Пенц, Т. М. Ільченко, Г. В. Вахненко

    У статті на основі аналізу пошкоджень цегляних складно-навантажених конструкцій (стін, простінків, колон) громадської будівлі, що виникли після тривалих температурно-вологісних впливів в результаті перебування будівлі у незавершеному незаконсервованому стані, та із використанням пропозицій з підвищення несучої здатності цегляної кладки шляхом влаштування сталевих обойм викладено хід та результати скінченно-елементного моделювання підсилених складно-навантажених деформованих цегляних колон будівель з метою влаштування вбудованих споруд цивільного захисту із сталезалізобетону. Створення скінченно-елементної моделі для визначення напружено-деформованого стану чисельних зразків та її аналіз у пружній стадії роботи виконувались по дев’яти ступеневому алгоритму, а саме: вибір системи координат, створення геометрії моделі, задавання властивостей матеріалів, вибір типу та розбиття на скінченні елементи просторової геометрії, задавання граничних умов (типу опор), формування системи навантажень, перевірка коректності розробленої моделі, вибір типу та налаштування параметрів скінченно-елементного аналізу та проведення власне самого аналізу. Опис кроків виконання вказаного алгоритму під час скінченно-елементного аналізу підсилених цегляних колон дублюється пояснюючими зрозумілими скрінами з програмного комплексу.У другій половині статті наведено результати скінченно-елементного аналізу підсилених сталевими обоймами цегляних колон. Внаслідок проведення розрахунків методом скінченних елементів за допомогою електронно-обчислювальних машин отримано графіки розподілу відносно головних осей напружень і деформацій на поверхні та в будь-якому перерізі моделі на поверхні цегляної кладки до та після підсилення, а також по довжині елементів сталевої обойми підсилення, що показані на діаграмах.

  • Open Access

    Applying mathematical modeling to determine the efficiency of reinforcing brick columns in the built-in civil defense structures with steel cages

    by Anton Hasenko, Dmytro Usenko, Pavlo Semko, Dmytro Ovsii

    This study’s object is brick structures for multi-story residential construction. In such buildings it is necessary to arrange built-in protective structures for civil defense. As a result of prolonged temperature and humidity exposure, wetting and destruction of brickwork may occur. Solving this problem requires devising measures to isolate brickwork from external influences, as well as, if necessary, options for strengthening damaged structures. One of the results of this work is the identification of principal damage based on analysis of the consequences of prolonged temperature and humidity exposure to complexly loaded brick structures (walls, partitions, columns) of a public facility. This is frost-related damage up to 40% of the initial cross-section, which is mainly associated with different porosity of the brick and the influence of atmospheric precipitation. The next result of the work is proposals for increasing the bearing capacity of damaged brickwork using tie clips from rolled steel elements. A qualitative feature of the proposal is the recommendations for installing these clips, which allow them to be included in joint work with existing brick elements. This qualitative distinctive feature was confirmed by mathematical numerical modeling of the increase in the bearing capacity of reinforcement brick structures. From a scientific perspective, different initial stress-strain states of brick structures and steel elements at the time of ensuring their joint operation were taken into account. After the installation of steel clips, the maximum compressive stresses in the brickwork decreased by 28.6%. The results could be applied when installing reinforcements with steel clips for damaged compressed brick structures


  • Open Access

    OPTIMIZATION OF TECHNICAL SYSTEM RELIABILITY TAKING INTO ACCOUNT RESOURCE MINIMIZATION

    by V. Usenko, O. Chernikov, I. Usenko, D. Usenko

    This article explores optimizing the reliability of redundant technical systems through theoretical modeling, numerical methods, and economic optimization. It highlights balancing reliability and costs, critical thresholds, and strategies for resource allocation. Numerical methods identify critical zones in structures, supporting targeted reinforcement for enhanced performance and sustainability under varying operational conditions.

  • Theoretical justification for obtaining new nanomaterials by taking into account the influence of three main factors

    by V. V. Soloviev, V. L. Cherhynets, O. E. Illyash, N. V. Solovieva, V. O. Kostenko, D. V. Usenko

  • Open Access

    ESTABLISHING THE RELIABILITY LEVEL OF MASONRY BEARING STRUCTURES BASED ON ITS COMPONENT STRENGTH ANALYSIS

    by D. Yermolenko, I. Usenko, D. Usenko

    The article discusses aspects related to assessing the reliability of masonry structures. The authors present methods for determining the compressive strength of masonry in existing structures, taking into account reliability theory. We also consider practical solutions for calculating the design strength of masonry, which may help to assess the safety of massive brick walls and pillars that act as core structural elements of existing buildings. Thus, walls and pillars operating in compression are vital elements of stone buildings and require special attention when analysing and assessing their strength. They carry enormous loads and are critical to the stability of the entire structure. There are cases when it may be hard to obtain safe samples for testing masonry mechanical performance, making the analysis of existing masonry structures difficult. However, building codes and methods provide specific methods for determining the strength of existing structures based on reliability theory. These methods assume uniformity of masonry with regularly spaced brick layers. Although such assumptions may simplify the analysis, they can still provide sufficiently accurate results for making decisions about the safety and reliability of the building. It is essential to consider all possible factors and limitations when using these methods to ensure a reliable assessment of the condition of masonry structures. Stone materials are among the most traditional in various areas of construction production. Buildings with brick load-bearing walls represent the lion’s share of the existing housing development in Ukraine. Ensuring its high-quality operation and the safety of residents during the life cycle of such buildings are priority areas. However, changes occurring in the external environment and the state of regulatory support for construction production require a periodic return to the issues of assessing the load-bearing capacity of both previously erected building structures and those under design. Thus, lately, the territories with previously unusual force impacts on building structures, such as horizontal displacements of the base of the building, have significantly expanded. The reasons for this include seismic activity in certain regions of the country and the results of anthropogenic factors, particularly the areas with unstable soils. We should note that many buildings and structures are subject to external influence due to military operations on a large territory of Ukraine. So, in the event of a hit by warheads or the action of a blast wave, they generate new, non-typical, but dangerous effects on the load-bearing structures of the entire building. Keywords: reliability theory, reliability assessment, structural safety, stone structures, masonry strength.

  • Open Access

    RELIABILITY ASSESSMENT OF STONE STRUCTURES

    by O. Semko, N. Pinchuk, D. Usenko

    The article provides valuable information on methods for assessing the reliability of stone structures. The authors draw attention to the issues of diagnostics and calculation of the reliability of existing masonry structures, and also offer methods for determining the compressive strength of masonry using the theory of reliability. The destructive and non-destructive tests underlying the determination of strength masonry are also described. The authors emphasize the importance of structural safety and reliability, which depend on many factors, including the type and magnitude of loads and the bearing capacity of structural elements. A sufficient state of safety is ensured by compliance with the relevant standards and regulations. The article draws attention to the importance of carrying out tests and calculations in the reconstruction and repair of buildings in order to guarantee their safe operation. The authors note that the safety and reliability of the design also depends on compliance with the rules and regulations that take into account the social, economic and environmental consequences of failure. The emphasis on the probabilistic approach to assessing the reliability of a design is an important aspect of the article. Taking into account the probability of failure allows us to develop a rational approach to the repair and reconstruction of buildings, ensuring their normal operation. The authors also draw attention to the importance of determining the probability of failure (Pf) as a fundamental parameter for its assessment. Keywords: reliability assessment, masonry structures, masonry strength, structural safety, safety factors, deformations, fire resistance, reliability theory, failure probability.