Yangbing Cao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yangbing Cao has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
- Sui Zhang
Engineering Technology Innovation Center of Mineral Resources Explorations in Bedrock Zones, Ministry of Natural Resources, Guiyang 550081, China
3 shared publications - Weiguo Gong
Zijin School of Geology and Mining, Fuzhou University, Fuzhou 350108, China
3 shared publications - Fuming Cai
Zijin School of Geology and Mining, Fuzhou University, Fuzhou 350108, China
2 shared publications Min Bao
Zijin School of Geology and Mining, Fuzhou University, Fuzhou, China
2 shared publications- Qiang Yan
Zijin School of Geology and Mining, Fuzhou University, Fuzhou 350108, China
2 shared publications Xiangxiang Zhang
Zijin School of Geology and Mining, Fuzhou University, Fuzhou 350108, China
2 shared publications
Latest Publications
- Open Access
- 24 July 2024
- Published by Elsevier in KSCE Journal of Civil Engineering
- Vol. 28 (8) , 3574
Erratum to: An Experimental Study of the Effects of Filling Degree on Shear Behavior and Acoustic Emission Characteristics of Kaolinite-Filled Granite Joints
- 24 July 2024
- Published by Elsevier in KSCE Journal of Civil Engineering
- Vol. 28 (8) , 3574
Open AccessErratum to: An Experimental Study of the Effects of Filling Degree on Shear Behavior and Acoustic Emission Characteristics of Kaolinite-Filled Granite Joints
- Open Access
- 4 April 2024
- Published by Elsevier in KSCE Journal of Civil Engineering
- Vol. 28 (7) , 2966-2981
An Experimental Study of the Effects of Filling Degree on Shear Behavior and Acoustic Emission Characteristics of Kaolinite-Filled Granite Joints
- 4 April 2024
- Published by Elsevier in KSCE Journal of Civil Engineering
- Vol. 28 (7) , 2966-2981
Open AccessAn Experimental Study of the Effects of Filling Degree on Shear Behavior and Acoustic Emission Characteristics of Kaolinite-Filled Granite Joints
- Open Access
- 20 March 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (6) , 2602
Experimental Research on Anisotropy Characteristics of Shale under Triaxial Incremental Cyclic Loading and Unloading
Shale is a common rock type that is associated with underground engineering projects, and several important factors, such as bedding structure, confining pressure, and the loading and unloading path, significantly influence the anisotropy of shale. Triaxial monotonic loading tests and triaxial incremental cyclic loading and unloading tests of shale under three kinds of confining pressures and five types of bedding inclination angles (θ) were thus performed to investigate the anisotropy of shale in terms of mechanical behavior, acoustic emission (AE), and energy evolution, and reveal the mechanism by which shale anisotropy is weakened. The results show that (1) the compressive strength and elastic modulus of shale decrease and then increase as the θ increases, and that both σ3 and incremental cyclic loading and unloading reduce the anisotropy in terms of the compressive strength and elastic modulus of shale, with the ratio of plastic strain to total strain reaching its maximum at a θ of 60° during each loading and unloading cycle. (2) The failure modes of shale with θ of 0°, 30°, and 90° under triaxial monotonic loading are similar to the counterparts under triaxial incremental cyclic loading and unloading, while the failure modes of shale with θ of 45° and 60° differ significantly under the two loading conditions, and interestingly, the degree to which the bedding plane participates in shale crack evolution under incremental cyclic loading and unloading is considerably lower than that under triaxial monotonic loading. (3) The cumulative AE count and AE b-value of shale first decrease and then increase as the θ increases, while the Felicity ratio decreases as the number of cycles increases. (4) As the θ increases, the total energy density U0 and the parameter m, which reflects the accumulation rate of elastic energy, first decrease and then increase, with both reaching a minimum at a θ of 60°. (5) The mode by which cyclic loading and unloading leads to failure in shale with a θ of 60° is similar to that at a θ of 0° and is the main mechanism by which shale anisotropy weakening occurs as a result of cyclic loading and unloading. The results provide experimental support and a theoretical basis for safer and more efficient underground engineering projects that involve shale.
- 20 March 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (6) , 2602
Open AccessExperimental Research on Anisotropy Characteristics of Shale under Triaxial Incremental Cyclic Loading and Unloading
Shale is a common rock type that is associated with underground engineering projects, and several important factors, such as bedding structure, confining pressure, and the loading and unloading path, significantly influence the anisotropy of shale. Triaxial monotonic loading tests and triaxial incremental cyclic loading and unloading tests of shale under three kinds of confining pressures and five types of bedding inclination angles (θ) were thus performed to investigate the anisotropy of shale in terms of mechanical behavior, acoustic emission (AE), and energy evolution, and reveal the mechanism by which shale anisotropy is weakened. The results show that (1) the compressive strength and elastic modulus of shale decrease and then increase as the θ increases, and that both σ3 and incremental cyclic loading and unloading reduce the anisotropy in terms of the compressive strength and elastic modulus of shale, with the ratio of plastic strain to total strain reaching its maximum at a θ of 60° during each loading and unloading cycle. (2) The failure modes of shale with θ of 0°, 30°, and 90° under triaxial monotonic loading are similar to the counterparts under triaxial incremental cyclic loading and unloading, while the failure modes of shale with θ of 45° and 60° differ significantly under the two loading conditions, and interestingly, the degree to which the bedding plane participates in shale crack evolution under incremental cyclic loading and unloading is considerably lower than that under triaxial monotonic loading. (3) The cumulative AE count and AE b-value of shale first decrease and then increase as the θ increases, while the Felicity ratio decreases as the number of cycles increases. (4) As the θ increases, the total energy density U0 and the parameter m, which reflects the accumulation rate of elastic energy, first decrease and then increase, with both reaching a minimum at a θ of 60°. (5) The mode by which cyclic loading and unloading leads to failure in shale with a θ of 60° is similar to that at a θ of 0° and is the main mechanism by which shale anisotropy weakening occurs as a result of cyclic loading and unloading. The results provide experimental support and a theoretical basis for safer and more efficient underground engineering projects that involve shale.
- Open Access
Influences of Water Content on Acousto-Mechanical Properties and Failure Behaviors of Triaxially Compressed Shale
Due to the extreme water sensitivity of shale, the excavation of shale underground engineering is prone to major disaster accidents such as roof falls and collapses. However, current investigations have failed to fully explain the mechanisms by which water content affects shale damage behaviors. In this study, the acousto-mechanical properties and failure behaviors of laminated shale under different confining pressures σ3 are investigated with the aid of AE monitoring for three different water content states. The results show that the shale strength decreases with the increase of the water content, but it increases as the confining pressure σ3 increases. For the shale, the change in the wetting angle and the distance between the centroids of the two adjacent particles inside the bedding plane is more prominent than the surrounding shale matrix, and the swelling pressure is generated among the clay minerals, which are the two main mechanisms for the bedding-participating failure and the shale softening after immersion. Moreover, with the increase of the water content and σ3, the damage mode of shale specimens gradually changes from tension damage to shear damage. Controlled by bedding, shale failure shows significant suddenness without clear acoustical precursors. This study provides experimental and theoretical bases for the stability analysis of shale underground engineering.
Open AccessInfluences of Water Content on Acousto-Mechanical Properties and Failure Behaviors of Triaxially Compressed Shale
Due to the extreme water sensitivity of shale, the excavation of shale underground engineering is prone to major disaster accidents such as roof falls and collapses. However, current investigations have failed to fully explain the mechanisms by which water content affects shale damage behaviors. In this study, the acousto-mechanical properties and failure behaviors of laminated shale under different confining pressures σ3 are investigated with the aid of AE monitoring for three different water content states. The results show that the shale strength decreases with the increase of the water content, but it increases as the confining pressure σ3 increases. For the shale, the change in the wetting angle and the distance between the centroids of the two adjacent particles inside the bedding plane is more prominent than the surrounding shale matrix, and the swelling pressure is generated among the clay minerals, which are the two main mechanisms for the bedding-participating failure and the shale softening after immersion. Moreover, with the increase of the water content and σ3, the damage mode of shale specimens gradually changes from tension damage to shear damage. Controlled by bedding, shale failure shows significant suddenness without clear acoustical precursors. This study provides experimental and theoretical bases for the stability analysis of shale underground engineering.
- Open Access
Study on Fluid Front Motion of Water, Nitrogen, and CO2 during Anisotropic Flow in Shale Reservoirs
The fluid front motion is an important phenomenon during anisotropic fluid flow in rock engineering. The pore pressure and mechanical responses may be significantly influenced and show an obvious difference near the moving fluid front. However, few studies have been conducted to investigate the front motion of different types of fluids during anisotropic fluid flow. In this work, a numerical model was proposed to detect the front motion of water, nitrogen, and CO2 in anisotropic shale reservoirs. The full coupling effects among mechanical deformation, fluid flow, and moving boundary in anisotropic porous media were considered in the model construction. The impacts of different fluid properties among water, nitrogen, and CO2 on the anisotropic fluid flow have been discussed. Then, the proposed model was applied to study the differences in front motion among different types of fluids in anisotropic shales. The impacts of permeability and mobility on fluid front motion were investigated. The theoretical equations for predicting the fluid front motion of different types of fluids were established by introducing corresponding correction coefficients to the previous formulas. The results showed that the model can well describe the anisotropic fluid permeation process. The fluid front motion increased with the increase of permeability and mobility. At the same permeability or mobility, the nitrogen front motion was the largest and the water front motion was the smallest. The difference in fluid front motion among water, nitrogen, and CO2 was caused by the difference of their viscosity and compressibility. The proposed formulas can fast and accurately predict the evolution of fluid front motion for different types of fluids.
Open AccessStudy on Fluid Front Motion of Water, Nitrogen, and CO2 during Anisotropic Flow in Shale Reservoirs
The fluid front motion is an important phenomenon during anisotropic fluid flow in rock engineering. The pore pressure and mechanical responses may be significantly influenced and show an obvious difference near the moving fluid front. However, few studies have been conducted to investigate the front motion of different types of fluids during anisotropic fluid flow. In this work, a numerical model was proposed to detect the front motion of water, nitrogen, and CO2 in anisotropic shale reservoirs. The full coupling effects among mechanical deformation, fluid flow, and moving boundary in anisotropic porous media were considered in the model construction. The impacts of different fluid properties among water, nitrogen, and CO2 on the anisotropic fluid flow have been discussed. Then, the proposed model was applied to study the differences in front motion among different types of fluids in anisotropic shales. The impacts of permeability and mobility on fluid front motion were investigated. The theoretical equations for predicting the fluid front motion of different types of fluids were established by introducing corresponding correction coefficients to the previous formulas. The results showed that the model can well describe the anisotropic fluid permeation process. The fluid front motion increased with the increase of permeability and mobility. At the same permeability or mobility, the nitrogen front motion was the largest and the water front motion was the smallest. The difference in fluid front motion among water, nitrogen, and CO2 was caused by the difference of their viscosity and compressibility. The proposed formulas can fast and accurately predict the evolution of fluid front motion for different types of fluids.
- Open Access
Experimental Study on the Influence of Hydromechanical Boundary Conditions on Shear-Flow Coupling Characteristics of Granite Joints
The instability of jointed rock mass is usually the shear process of the rock mass along discontinuities under the influence of groundwater flow. By conducting laboratory tests and numerical experiments on the shear-flow coupling of rock joints under constant normal stiffness (CNS) and constant normal stress (CNL) boundary conditions, the influence of normal boundary conditions and seepage pressure on the shear mechanical and flow characteristics of joints were investigated. The test results were as follows: The joint shear stiffness, peak, and residual shear strength under the CNS boundary condition were predominantly larger than those under the CNL boundary condition. Overall, these parameters were positively correlated with the initial normal stress . When MPa, the postpeak shear stress of the CNS boundary condition showed a sharp decrease, whereas that of the CNL boundary condition changed from a slowly decreasing type ( MPa, 6 MPa) to a sharply decreasing type at MPa. The peak dilation rate under the CNS boundary condition at all levels of normal stress was lower than that of CNL, and the strain softening in postpeak of the latter was more remarkable. In the process of joint shear, the hydraulic aperture displayed a four-stage variation law of “steady-sudden increase-slow increase-basically stable.” Moreover, the hydraulic aperture under the CNS boundary condition was always lower than that under the CNL boundary condition. The seepage pressure increased from 0.5 MPa to 1.5 MPa, and the average hydraulic aperture in the stable stage under normal stress at all levels increased from 0.146 mm to 0.187 mm. In addition, the average peak shear stress and average shear stiffness decreased by 0.9 MPa and 0.83 GPa/m, respectively. We also established a numerical model of a real rough three-dimensional joint, compiled a calculation program for the shear-flow process of a joint under CNS boundary conditions, and visualized the flow channel inside the joint. The seepage flow bypassed the area where the joints contacted each other, forming obvious flow channels. The flow rate increased at the intersection of the flow channels.
Open AccessExperimental Study on the Influence of Hydromechanical Boundary Conditions on Shear-Flow Coupling Characteristics of Granite Joints
The instability of jointed rock mass is usually the shear process of the rock mass along discontinuities under the influence of groundwater flow. By conducting laboratory tests and numerical experiments on the shear-flow coupling of rock joints under constant normal stiffness (CNS) and constant normal stress (CNL) boundary conditions, the influence of normal boundary conditions and seepage pressure on the shear mechanical and flow characteristics of joints were investigated. The test results were as follows: The joint shear stiffness, peak, and residual shear strength under the CNS boundary condition were predominantly larger than those under the CNL boundary condition. Overall, these parameters were positively correlated with the initial normal stress . When MPa, the postpeak shear stress of the CNS boundary condition showed a sharp decrease, whereas that of the CNL boundary condition changed from a slowly decreasing type ( MPa, 6 MPa) to a sharply decreasing type at MPa. The peak dilation rate under the CNS boundary condition at all levels of normal stress was lower than that of CNL, and the strain softening in postpeak of the latter was more remarkable. In the process of joint shear, the hydraulic aperture displayed a four-stage variation law of “steady-sudden increase-slow increase-basically stable.” Moreover, the hydraulic aperture under the CNS boundary condition was always lower than that under the CNL boundary condition. The seepage pressure increased from 0.5 MPa to 1.5 MPa, and the average hydraulic aperture in the stable stage under normal stress at all levels increased from 0.146 mm to 0.187 mm. In addition, the average peak shear stress and average shear stiffness decreased by 0.9 MPa and 0.83 GPa/m, respectively. We also established a numerical model of a real rough three-dimensional joint, compiled a calculation program for the shear-flow process of a joint under CNS boundary conditions, and visualized the flow channel inside the joint. The seepage flow bypassed the area where the joints contacted each other, forming obvious flow channels. The flow rate increased at the intersection of the flow channels.
- Open Access
- 13 April 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (8) , 3930
Mechanical Properties and Failure Mechanism of Granite with Maximum Free Water Absorption under Triaxial Compression
Granite in underground water-sealed storage caverns has usually been immersed for a long time. The immersion affects the mechanical properties and failure mechanism of granite with maximum free water absorption; therefore, it is crucial to study the behavior of granite under different confining pressures for engineering construction. A triaxial compression test with maximum free water absorption was conducted on granite and its mechanical properties were analyzed. A fracture scanning electron microscope test was carried out to analyze the microstructural characteristics and reveal the failure mechanism. The test results showed that the differential stress-axial strain curve can be divided into the initial compaction stage, the elastic deformation stage, the plastic deformation stage, and the post-peak strain-softening stage. With an increase in confining pressure, the duration of the initial compaction stage decreased, while the plastic deformation stage and the peak strength and peak strain stages increased. For the confining pressure range of 0–20 MPa, the peak stress difference of granite with maximum free water absorption was between 146.0 and 307.6 MPa. The elastic modulus was between 31.36 and 44.18 GPa. The cohesion (c) of the rock sample studied was 26.84 MPa and the internal friction angle (φ) was 51°. The failure mechanism of granite is tensile–shear composite failure, predominantly with tensile failure under low confining pressure regimes, and the inclined fracture surface is mainly due to shear failure under high confining pressure conditions. These research results provide updated reference data for rock engineering involving granitic mechanical properties and failure mechanisms in submerged caverns.
- 13 April 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (8) , 3930
Open AccessMechanical Properties and Failure Mechanism of Granite with Maximum Free Water Absorption under Triaxial Compression
Granite in underground water-sealed storage caverns has usually been immersed for a long time. The immersion affects the mechanical properties and failure mechanism of granite with maximum free water absorption; therefore, it is crucial to study the behavior of granite under different confining pressures for engineering construction. A triaxial compression test with maximum free water absorption was conducted on granite and its mechanical properties were analyzed. A fracture scanning electron microscope test was carried out to analyze the microstructural characteristics and reveal the failure mechanism. The test results showed that the differential stress-axial strain curve can be divided into the initial compaction stage, the elastic deformation stage, the plastic deformation stage, and the post-peak strain-softening stage. With an increase in confining pressure, the duration of the initial compaction stage decreased, while the plastic deformation stage and the peak strength and peak strain stages increased. For the confining pressure range of 0–20 MPa, the peak stress difference of granite with maximum free water absorption was between 146.0 and 307.6 MPa. The elastic modulus was between 31.36 and 44.18 GPa. The cohesion (c) of the rock sample studied was 26.84 MPa and the internal friction angle (φ) was 51°. The failure mechanism of granite is tensile–shear composite failure, predominantly with tensile failure under low confining pressure regimes, and the inclined fracture surface is mainly due to shear failure under high confining pressure conditions. These research results provide updated reference data for rock engineering involving granitic mechanical properties and failure mechanisms in submerged caverns.
- Open Access
Damage and Failure Characteristics of Surrounding Rock in Deep Circular Cavern under Cyclic Dynamic Load: A True Triaxial Experiment Investigation
For ensuring safety and efficiency during the construction of deep engineering, it is essential to explore the failure mode of the surrounding rock mass under dynamic disturbance and high geo-stress. We conducted true triaxial load tests for rock-like material with a preexisting circular hole, and monitored the acoustic emission (AE) signal during the whole test. The result demonstrates the evolution characteristics of damage and failure mode with different cyclic dynamic load amplitudes and intermediate principal stress. With the increase in cyclic dynamic load amplitude or the decrease in intermediate principal stress, the failure source mainly occurs at the two horizontal side walls of the surrounding rock where the failure patterns change from the slabbing to wall caving and, finally, to rockburst. The former failure mode can actually serve as an important precursor for the latter. Based on such mechanisms, the precursor can be indirectly detected in forms of AE signal released by microcracking. The research can provide a reliable guidance for the rock stability control and faithfully forecasting the larger-scale failure during the excavation of deep circular cavern.
Open AccessDamage and Failure Characteristics of Surrounding Rock in Deep Circular Cavern under Cyclic Dynamic Load: A True Triaxial Experiment Investigation
For ensuring safety and efficiency during the construction of deep engineering, it is essential to explore the failure mode of the surrounding rock mass under dynamic disturbance and high geo-stress. We conducted true triaxial load tests for rock-like material with a preexisting circular hole, and monitored the acoustic emission (AE) signal during the whole test. The result demonstrates the evolution characteristics of damage and failure mode with different cyclic dynamic load amplitudes and intermediate principal stress. With the increase in cyclic dynamic load amplitude or the decrease in intermediate principal stress, the failure source mainly occurs at the two horizontal side walls of the surrounding rock where the failure patterns change from the slabbing to wall caving and, finally, to rockburst. The former failure mode can actually serve as an important precursor for the latter. Based on such mechanisms, the precursor can be indirectly detected in forms of AE signal released by microcracking. The research can provide a reliable guidance for the rock stability control and faithfully forecasting the larger-scale failure during the excavation of deep circular cavern.
- Open Access
An Estimation Model for Hydraulic Conductivity of Low-Permeability and Unfilled Fractured Granite in Underground Water-Sealed Storage Caverns
The permeability of rock mass is closely related to the stability and safety of underground structure, especially in underground water-sealed storage caverns. With regard to the estimation approaches in predicting the hydraulic conductivity of fractured granite in water-sealed storage caverns, there are some limitations of parameter selection leading to poor applicability. Focusing on the contribution of the water conduction fractures (WCF) to the hydraulic conductivity, we attempted to propose a novel model, the CA model, for estimating its hydraulic conductivity based on the fracture orientation index and the normal stress index by analyzing the borehole wall imaging results and borehole water-pressure test results in the site of underground water-sealed storage caverns. The results indicated that the proposed model is suitable for low-permeability and unfilled fractured granite, exhibiting good effectiveness by clarifying the relation between geomechanical parameters and hydraulic behavior. Further, the parameters upon which the proposed model is based are representative and easy to obtain, which has certain guiding significance and reference value for analyzing the permeability characteristics of similar rock masses.
Open AccessAn Estimation Model for Hydraulic Conductivity of Low-Permeability and Unfilled Fractured Granite in Underground Water-Sealed Storage Caverns
The permeability of rock mass is closely related to the stability and safety of underground structure, especially in underground water-sealed storage caverns. With regard to the estimation approaches in predicting the hydraulic conductivity of fractured granite in water-sealed storage caverns, there are some limitations of parameter selection leading to poor applicability. Focusing on the contribution of the water conduction fractures (WCF) to the hydraulic conductivity, we attempted to propose a novel model, the CA model, for estimating its hydraulic conductivity based on the fracture orientation index and the normal stress index by analyzing the borehole wall imaging results and borehole water-pressure test results in the site of underground water-sealed storage caverns. The results indicated that the proposed model is suitable for low-permeability and unfilled fractured granite, exhibiting good effectiveness by clarifying the relation between geomechanical parameters and hydraulic behavior. Further, the parameters upon which the proposed model is based are representative and easy to obtain, which has certain guiding significance and reference value for analyzing the permeability characteristics of similar rock masses.