Xingtao Zhao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Xingtao Zhao has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Jiapeng Xiang
School of Science, Yanshan University
1 shared publication Menglin Liang
Key Laboratory for Microstructural Material Physics of Hebei Province, School of Science, Yanshan University, Qinhuangdao 066004, People’s Republic of China
1 shared publicationMu Wang
Electronic Engineering College, Yanshan University, Qinhuangdao 066004, People’s Republic of China
1 shared publicationQi Hu
Key Laboratory for Microstructural Material Physics of Hebei Province, School of Science, Yanshan University, Qinhuangdao 066004, People’s Republic of China
1 shared publicationSai Liu
Electronic Engineering College, Yanshan University, Qinhuangdao 066004, People’s Republic of China
1 shared publication- Shiliang Guo
Yanshan University
1 shared publication
Latest Publications
- 5 March 2026
- Published by IOP Publishing in Physica Scripta
- Vol. 101 (9) , 095507
Novel single-polarized single-mode low-loss hollow-core anti-resonant fiber
A novel hollow-core anti-resonant fiber (HC-ARF) design is proposed, featuring a cladding structure composed of five nested tubes and five anti-resonant nested rings. The nested tubes are engineered with two distinct wall thickness configurations (resonant and anti-resonant) to tailor the optical properties. This unique structure endows the fiber with comprehensive superior performance, including single-polarization operation, low modal loss, a high polarization extinction ratio (PER), a high higher-order mode extinction ratio (HOMER), and a broad operating bandwidth. Numerical simulations demonstrate that the proposed design effectively reduces the loss of the x-polarized fundamental mode (x-pol FM) while significantly enhancing the PER. Compared with previous studies, this scheme simultaneously improves both PER and HOMER, while remarkably reducing the bending loss in the -x direction. At the wavelength of 1.55 μm, the x-pol FM loss, PER, and HOMER reach 0.012 dB km −1 , 2,413,562.253, and 688, respectively. Furthermore, the fiber maintains an x-pol FM loss below 1 dB km −1 and a PER exceeding 100 within a bandwidth of 31 nm. For a bending radius of 6 cm, the total bending loss in the -x direction is as low as 0.11 dB km −1 , with a corresponding PER of 126. Considering practical fabrication processes, a tolerance analysis of the cladding strut angle was conducted. The results indicate that the fiber achieves optimal performance when the offset angle is 0°, providing valuable theoretical guidance for the fabrication optimization of similar fibers.
- 5 March 2026
- Published by IOP Publishing in Physica Scripta
- Vol. 101 (9) , 095507
Novel single-polarized single-mode low-loss hollow-core anti-resonant fiber
A novel hollow-core anti-resonant fiber (HC-ARF) design is proposed, featuring a cladding structure composed of five nested tubes and five anti-resonant nested rings. The nested tubes are engineered with two distinct wall thickness configurations (resonant and anti-resonant) to tailor the optical properties. This unique structure endows the fiber with comprehensive superior performance, including single-polarization operation, low modal loss, a high polarization extinction ratio (PER), a high higher-order mode extinction ratio (HOMER), and a broad operating bandwidth. Numerical simulations demonstrate that the proposed design effectively reduces the loss of the x-polarized fundamental mode (x-pol FM) while significantly enhancing the PER. Compared with previous studies, this scheme simultaneously improves both PER and HOMER, while remarkably reducing the bending loss in the -x direction. At the wavelength of 1.55 μm, the x-pol FM loss, PER, and HOMER reach 0.012 dB km −1 , 2,413,562.253, and 688, respectively. Furthermore, the fiber maintains an x-pol FM loss below 1 dB km −1 and a PER exceeding 100 within a bandwidth of 31 nm. For a bending radius of 6 cm, the total bending loss in the -x direction is as low as 0.11 dB km −1 , with a corresponding PER of 126. Considering practical fabrication processes, a tolerance analysis of the cladding strut angle was conducted. The results indicate that the fiber achieves optimal performance when the offset angle is 0°, providing valuable theoretical guidance for the fabrication optimization of similar fibers.
- Open Access
- 29 September 2021
- Published by MDPI AG in Nanomaterials
- Vol. 11 (10) , 2559
Polarization-Independent Optoelectronic Modulator Based on Graphene Ridge Structure
In this paper, we propose a polarization-independent optoelectronic modulator based on the electrical absorption effect of graphene. Firstly, we use the simulation software COMSOL Multiphysics to design the structure, and find via changing the applied voltage on both ends of the graphene that the equivalent refractive index of graphene can be changed, thus changing the light absorption capacity of the modulator. The waveguides in the transverse magnetic (TM) and transverse electric (TE) modes have almost the same extinction coefficient by making a double-layer graphene ridge structure in the center of the silicon-based waveguide, which can achieve approaching modulation depth in the TM and TE modes. At 1550 nm wavelength, the two-dimensional cross-section of the structure is analyzed by the FEM method using COMSOL Multiphysics to obtain the effective refractive index of the structure. The simulation results show that when the distance between the double-layer graphene isolation layer is d = 20 nm, the TE and TM modes can achieve extinction ratios up to 110 dB over the wide communication band by selecting appropriate “ON” and “OFF” switching points. The bandwidth is 173.78 GHz and the insertion loss is only 0.0338 dB.
- 29 September 2021
- Published by MDPI AG in Nanomaterials
- Vol. 11 (10) , 2559
Open AccessPolarization-Independent Optoelectronic Modulator Based on Graphene Ridge Structure
In this paper, we propose a polarization-independent optoelectronic modulator based on the electrical absorption effect of graphene. Firstly, we use the simulation software COMSOL Multiphysics to design the structure, and find via changing the applied voltage on both ends of the graphene that the equivalent refractive index of graphene can be changed, thus changing the light absorption capacity of the modulator. The waveguides in the transverse magnetic (TM) and transverse electric (TE) modes have almost the same extinction coefficient by making a double-layer graphene ridge structure in the center of the silicon-based waveguide, which can achieve approaching modulation depth in the TM and TE modes. At 1550 nm wavelength, the two-dimensional cross-section of the structure is analyzed by the FEM method using COMSOL Multiphysics to obtain the effective refractive index of the structure. The simulation results show that when the distance between the double-layer graphene isolation layer is d = 20 nm, the TE and TM modes can achieve extinction ratios up to 110 dB over the wide communication band by selecting appropriate “ON” and “OFF” switching points. The bandwidth is 173.78 GHz and the insertion loss is only 0.0338 dB.