Lu Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Lu Wang has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
- Arash Asadi
Wireless Communication and Sensing Lab, Delft University of Technology, Delft, Netherlands
2 shared publications - Luis Fernando Abanto-Leon
Ruhr University Bochum
2 shared publications - Ahmed El-Hadi
Sir Thomas Brown Colorectal Unit, Norfolk and Norwich University Hospital, Norwich, UK
1 shared publication - Aiming Bu
Department of Materials Science and Engineering, Beijing Institute of Technology, Beijing, China
1 shared publication - Angeles Vazquez-Castro
Department of Telecommunications and Systems Engineering, Autonomous University of Barcelona, Barcelona, Spain
1 shared publication - Carles Ferrer
Department of Microelectronic and Electronic Systems, Universitat Autònoma de Barcelona, Bellaterra, 08193 Barcelona, Spain
1 shared publication
Latest Publications
- 30 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Wireless Communications
- Vol. 25 (15361276) , 8982-8999
Faulty RIS-Aided Integrated Sensing and Communication: Modeling and Optimization
This work investigates a practical reconfigurable intelligent surface (RIS)-aided integrated sensing and communication (ISAC) system, where a subset of RIS elements fail to function properly and reflect incident signals randomly towards unintended directions with attenuation, thereby degrading system performance. To date, no study has addressed such impairments caused by faulty RIS elements in ISAC systems. This work aims to fill the gap. First, to quantify the impact of faulty elements on ISAC performance, we derive the misspecified Cramér-Rao bound (MCRB) for sensing parameter estimation and signal-to-interference-and-noise ratio (SINR) for communication quality. Then, to mitigate the performance loss caused by faulty elements, we jointly design the remaining functional RIS phase shifts and transmit beamforming to minimize the MCRB, subject to the communication SINR and transmit power constraints. The resulting optimization problem is highly non-convex due to the intricate structure of the MCRB expression and constant-modulus constraint imposed on RIS. To address this, we reformulate it into a more tractable form and propose a block coordinate descent (BCD) algorithm that incorporates majorization-minimization (MM), successive convex approximation (SCA), and penalization techniques. Simulation results demonstrate that our proposed approach reduces the performance loss by 21.25% on average compared to the baseline where the presence of faulty elements is ignored. Furthermore, the performance gain becomes more evident as the number of faulty elements increases.
- 30 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Wireless Communications
- Vol. 25 (15361276) , 8982-8999
Faulty RIS-Aided Integrated Sensing and Communication: Modeling and Optimization
This work investigates a practical reconfigurable intelligent surface (RIS)-aided integrated sensing and communication (ISAC) system, where a subset of RIS elements fail to function properly and reflect incident signals randomly towards unintended directions with attenuation, thereby degrading system performance. To date, no study has addressed such impairments caused by faulty RIS elements in ISAC systems. This work aims to fill the gap. First, to quantify the impact of faulty elements on ISAC performance, we derive the misspecified Cramér-Rao bound (MCRB) for sensing parameter estimation and signal-to-interference-and-noise ratio (SINR) for communication quality. Then, to mitigate the performance loss caused by faulty elements, we jointly design the remaining functional RIS phase shifts and transmit beamforming to minimize the MCRB, subject to the communication SINR and transmit power constraints. The resulting optimization problem is highly non-convex due to the intricate structure of the MCRB expression and constant-modulus constraint imposed on RIS. To address this, we reformulate it into a more tractable form and propose a block coordinate descent (BCD) algorithm that incorporates majorization-minimization (MM), successive convex approximation (SCA), and penalization techniques. Simulation results demonstrate that our proposed approach reduces the performance loss by 21.25% on average compared to the baseline where the presence of faulty elements is ignored. Furthermore, the performance gain becomes more evident as the number of faulty elements increases.
- 30 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 74 (6) , 9149-9164
Joint Hybrid Beamforming and RIS Phase Shift Design for RIS-Enabled mmWave ISAC System
Empowering cellular networks with augmented sensing capabilities is a key research area in sixth generation (6 G) communication systems. Recently, we have witnessed a plethora of efforts to devise solutions that integrate sensing capabilities into communication systems, i.e., integrated sensing and communication (ISAC), especially at millimeter-wave (mmWave) frequencies with large bandwidths. Despite the challenges posed by severe path loss and blockage at mmWave bands, this work incorporates reconfigurable intelligent surfaces (RISs) into ISAC systems to enhance both sensing and communication. To comply with the waveform utilized in current cellular systems, this paper studies mmWave orthogonal frequency-division multiplexing (OFDM) ISAC systems in the presence of RISs. Specifically, we jointly design the hybrid beamforming and RIS phase shifts to guarantee the sensing functionalities via minimizing the beampattern mean squared error at RIS, subject to signal-to-interference-plus-noise (SINR) and power constraints. The non-convexity of the investigated problem poses a challenge which we address by proposing a solution based on the penalty method and manifold-based alternating direction method of multipliers (ADMM). Simulation results demonstrate that both sensing and communication capabilities improve when the RIS is adequately designed. In addition, we discuss the tradeoff between sensing and communication.
- 30 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 74 (6) , 9149-9164
Joint Hybrid Beamforming and RIS Phase Shift Design for RIS-Enabled mmWave ISAC System
Empowering cellular networks with augmented sensing capabilities is a key research area in sixth generation (6 G) communication systems. Recently, we have witnessed a plethora of efforts to devise solutions that integrate sensing capabilities into communication systems, i.e., integrated sensing and communication (ISAC), especially at millimeter-wave (mmWave) frequencies with large bandwidths. Despite the challenges posed by severe path loss and blockage at mmWave bands, this work incorporates reconfigurable intelligent surfaces (RISs) into ISAC systems to enhance both sensing and communication. To comply with the waveform utilized in current cellular systems, this paper studies mmWave orthogonal frequency-division multiplexing (OFDM) ISAC systems in the presence of RISs. Specifically, we jointly design the hybrid beamforming and RIS phase shifts to guarantee the sensing functionalities via minimizing the beampattern mean squared error at RIS, subject to signal-to-interference-plus-noise (SINR) and power constraints. The non-convexity of the investigated problem poses a challenge which we address by proposing a solution based on the penalty method and manifold-based alternating direction method of multipliers (ADMM). Simulation results demonstrate that both sensing and communication capabilities improve when the RIS is adequately designed. In addition, we discuss the tradeoff between sensing and communication.
- 24 November 2023
- Published by SPIE-Intl Soc Optical Eng
- Vol. 12935, 1257-1262
Single shot 3D imaging by active illumination and point-spread-function engineering
Depth information is crucial for 3D scene reconstruction. Combining the advantages of active illumination, a 3D imaging method using engineered active illumination and double-helix point spread function (DH-PSF) is proposed. It projects a dense pattern of dots onto the object's surface, and a commercial camera captures the dot pattern through a pair of micro lens arrays in a 4f configuration, which includes a DH phase array at the 2f position on the Fourier transform plane. DH-PSF encodes depth information of the object, and by measuring the rotation angles of the two lobes of the dots on the object's surface, the distance between the imaging systems can be obtained. Simultaneously, the twodimensional image of the object can be reconstructed based on the captured images and the known DH-PSF. The proposed 3D imaging method can reconstruct the 3D structure of the object from a single captured 2D image. It has the advantages of improving distance resolution and reducing system complexity.
- 24 November 2023
- Published by SPIE-Intl Soc Optical Eng
- Vol. 12935, 1257-1262
Single shot 3D imaging by active illumination and point-spread-function engineering
Depth information is crucial for 3D scene reconstruction. Combining the advantages of active illumination, a 3D imaging method using engineered active illumination and double-helix point spread function (DH-PSF) is proposed. It projects a dense pattern of dots onto the object's surface, and a commercial camera captures the dot pattern through a pair of micro lens arrays in a 4f configuration, which includes a DH phase array at the 2f position on the Fourier transform plane. DH-PSF encodes depth information of the object, and by measuring the rotation angles of the two lobes of the dots on the object's surface, the distance between the imaging systems can be obtained. Simultaneously, the twodimensional image of the object can be reconstructed based on the captured images and the known DH-PSF. The proposed 3D imaging method can reconstruct the 3D structure of the object from a single captured 2D image. It has the advantages of improving distance resolution and reducing system complexity.
- 1 November 2021
- Published by Elsevier in Computers and Electronics in Agriculture
- Vol. 190, 106419
A novel in vivo 433 MHz radio channel indoor study targeting on power saving for ruminal health monitoring boluses
- 1 November 2021
- Published by Elsevier in Computers and Electronics in Agriculture
- Vol. 190, 106419
A novel in vivo 433 MHz radio channel indoor study targeting on power saving for ruminal health monitoring boluses
- 29 September 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 70 (11) , 11881-11893
Joint Bandwidth and Transmission Opportunity Allocation for the Coexistence Between NR-U and WiFi Systems in the Unlicensed Band
The explosively increasing traffic demand in the fifth generation (5 G) mobile communication system has made the limited licensed spectrum quite competitive. Such status quo motivates the development of new radio (NR) based access to the unlicensed band, which is a promising solution for system performance enhancement. In this paper, we focus on the coexistence between the NR system and the WiFi system based on the duty cycle mechanism. Firstly, an optimization model is formulated to maximize the throughput of the NR system in the unlicensed band (NR-U) via the joint bandwidth and transmission opportunity allocation under the fairness requirement. Then, to solve this optimization problem, we convert it into a Markov decision process with continuous action space, based on which a deep deterministic policy gradient (DDPG) based coexistence algorithm is proposed. At last, simulation results show that the proposed algorithm can ensure the coexistence between the NR-U system and the WiFi system from three aspects. Firstly, the throughput improvements of the NR-U system under different fairness thresholds and different number of user equipments and access points are illustrated. Secondly, the proposed algorithm adapts to the dynamic situations of varying fairness thresholds and channel conditions. Thirdly, the effectiveness of the proposed algorithm is validated with at least 5.01% throughput improvement by comparing with proportional scheme, average scheme and Q-learning scheme.
- 29 September 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 70 (11) , 11881-11893
Joint Bandwidth and Transmission Opportunity Allocation for the Coexistence Between NR-U and WiFi Systems in the Unlicensed Band
The explosively increasing traffic demand in the fifth generation (5 G) mobile communication system has made the limited licensed spectrum quite competitive. Such status quo motivates the development of new radio (NR) based access to the unlicensed band, which is a promising solution for system performance enhancement. In this paper, we focus on the coexistence between the NR system and the WiFi system based on the duty cycle mechanism. Firstly, an optimization model is formulated to maximize the throughput of the NR system in the unlicensed band (NR-U) via the joint bandwidth and transmission opportunity allocation under the fairness requirement. Then, to solve this optimization problem, we convert it into a Markov decision process with continuous action space, based on which a deep deterministic policy gradient (DDPG) based coexistence algorithm is proposed. At last, simulation results show that the proposed algorithm can ensure the coexistence between the NR-U system and the WiFi system from three aspects. Firstly, the throughput improvements of the NR-U system under different fairness thresholds and different number of user equipments and access points are illustrated. Secondly, the proposed algorithm adapts to the dynamic situations of varying fairness thresholds and channel conditions. Thirdly, the effectiveness of the proposed algorithm is validated with at least 5.01% throughput improvement by comparing with proportional scheme, average scheme and Q-learning scheme.
- 17 September 2021
- Published by Taylor & Francis in Composite Interfaces
- Vol. 29 (5) , 487-501
Liquid-phase deposition of Al2O3 coating on quartz fiber for enhanced strength at elevated temperature
In the manuscript, the liquid-phase deposition technique was used to successfully deposit an Al2O3 ceramic coating on the quartz fiber. The thickness of the coating was not uniform. The thickest part of the coating can reach to 1159 nm. The main coating formed is Al2O3, but there are still hydrous Al(OH)3. With the extension of the deposition time, the micro-morphology of the coating changed from nano-scale clusters to dense flakes. The coating had an amorphous structure. In this case, the coating effectively improved the mechanical properties of the quartz fiber at high temperatures, and the breaking load of the fiber increased with the extension of the deposition time. After high temperature annealing, the breaking load of the coated fiber deposited for 6 h was 126.1 N, compared to 50.3 N of the blank fiber. The protection mechanism of Al2O3 coating was studied from the aspect of microstructure. By observing the surface morphologies of blank fiber and coated fiber after high temperature annealing. It was found that the presence of the coating hindered the damage of the fiber surface by high temperature, and the defects on the fiber surface were reduced, so the mechanical properties were effectively improved. Graphical Abstract
- 17 September 2021
- Published by Taylor & Francis in Composite Interfaces
- Vol. 29 (5) , 487-501
Liquid-phase deposition of Al2O3 coating on quartz fiber for enhanced strength at elevated temperature
In the manuscript, the liquid-phase deposition technique was used to successfully deposit an Al2O3 ceramic coating on the quartz fiber. The thickness of the coating was not uniform. The thickest part of the coating can reach to 1159 nm. The main coating formed is Al2O3, but there are still hydrous Al(OH)3. With the extension of the deposition time, the micro-morphology of the coating changed from nano-scale clusters to dense flakes. The coating had an amorphous structure. In this case, the coating effectively improved the mechanical properties of the quartz fiber at high temperatures, and the breaking load of the fiber increased with the extension of the deposition time. After high temperature annealing, the breaking load of the coated fiber deposited for 6 h was 126.1 N, compared to 50.3 N of the blank fiber. The protection mechanism of Al2O3 coating was studied from the aspect of microstructure. By observing the surface morphologies of blank fiber and coated fiber after high temperature annealing. It was found that the presence of the coating hindered the damage of the fiber surface by high temperature, and the defects on the fiber surface were reduced, so the mechanical properties were effectively improved. Graphical Abstract