OUOlena Usychenko

Olena Usychenko

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Olena Usychenko has a total of 37 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Determining the optimal physical-mechanical parameters of epoxy asphalt concrete for road surface to ensure its durability

    by Artur Onyshchenko, Volodymyr Zelenovsky, Vitalii Kovalchuk, Anatolii Tsynka, Volodymyr Kaskiv, Sergii Illiash, Olena Usychenko

    This study investigates the process that ensures durability of road surface by using epoxy asphalt concrete with optimal physical and mechanical characteristics. The task addressed relates to the lack of detailed research into the simultaneous influence of several key factors on the physical and mechanical properties of epoxy asphalt concrete, in particular the content of epoxy components in the bitumen binder, the temperature and duration of hardening. In addition, there is no scientific justification for the optimal mutual combination of these parameters in order to increase the durability of road surface for transport structures. For this purpose, epoxy asphalt concrete was used as a building material for the road surface on transport structures. It was established that due to the thermosetting nature of the epoxy-modified bitumen binder, the material acquires fundamentally higher indicators of rutting resistance, crack resistance, frost resistance, water resistance, and resistance to chemical aggression compared to conventional materials. A full multifactorial experiment was conducted with varying the content of epoxy components in bitumen (5–25) %, curing time (1–14) days, as well as curing temperature (25–60)°C. The influence of these factors on water saturation, compressive strength at temperatures of 20°C and 50°C, indirect tensile strength at a temperature of 0°C was studied. Adequate second-order regression models were built; the relative prediction error is less than 5%. The optimal parameters were established using the desirability function method: the content of epoxy components – 15.0%; curing time – 7 days; curing temperature – 40°C. The rational range is 13–17%, 6–8 days, and 35–55°C. At these values, the regulatory requirements from DBN V.2.3-4:2015, DBN V.2.3-22:2025, and DSTU 9290-5:2020 are exceeded, which contributes to the extension of repair intervals, reduction of operating costs, and increased road safety. These results could also be used in the future to devise technological regulations for the production of epoxy asphalt concrete mixtures for their practical implementation in the road sector

  • Transferring point weigh-in-motion measurements to the public road network for assessing the wartime transformation of traffic loading

    by Andrii Voinalovych, Olena Usychenko

    After the blockade of seaports, export freight flows in Ukraine were redistributed towards western land border crossings and the ports of the Danube cluster, so that increased traffic loading was imposed on network sections designed for substantially lighter freight traffic. The aim of the study is to develop and validate a method for transferring point measurements of the weigh-in-motion (WIM) system to the public road network in order to quantify this transformation and to identify sections where growth in calculated traffic loading coincides with poor pavement roughness. Two primary sources were used: a pre-war section-level network condition database (24,367 records, 22,302 km) and the technical report of the WIM system for 2019–2025 (78 sites). The report data were machine-extracted, filtered by data completeness, converted into equivalent design axles using an axle-based classification of 18 vehicle classes, and spatially matched to the database (68 of 78 sites). A log-linear transfer model was built and validated by leave-one-out cross-validation (MdAPE = 41 %). A load-field compression effect was established: the exponent of pre-war loading equals 0.352. It is shown that 10.5% of the traffic flow accounts for 71.3 % of the calculated traffic loading expressed in equivalent design axles, and that zones of load growth are statistically associated with zones of the worst pre-war roughness (p = 0.036). A total of 3,259 km was identified for priority survey. The practical value is a tool for ranking network sections when planning surveys, repairs and the siting of weight control points.

  • Open Access

    Determining the optimal power rating of a diesel generator and onboard energy storage system for a hybrid locomotive power plant used in haulage operations on quarry railways

    by Ie S Riabov, B Kh Yeritsyan, O V Demydov, A S Tykhonov, O Yu Usychenko

    The paper examines the application of a hybrid power plant to locomotives performing shunting and hauling operations on quarry railways. The implementation of hybrid traction systems contributes to a reduction in diesel fuel consumption, thereby lowering CO 2 emissions and decreasing overall fuel and energy costs. The study focuses on a quarry railway line used to transport iron ore from an open-pit mine to a processing plant. A mathematical model was developed to determine the operating parameters under various locomotive operating modes. The simulation studies were carried out for train movements with both empty and loaded dump cars. The results show that the use of a hybrid power plant reduces fuel consumption during the loaded half-trip by 20.6%–30.8%, depending on the power rating of the diesel generator and the onboard energy storage system. During the empty half-trip, fuel consumption can be reduced by more than 50%. It was determined that the optimal power rating of the diesel generator is 800 kW. The minimum required power rating of the onboard energy storage system is also 800 kW. Although increasing the power rating of the energy storage system provides additional reductions in diesel fuel consumption, it results in its increased weight, larger overall dimensions, and higher cost.

  • SMARTPHONE-BASED MONITORING OF ROAD PAVEMENT CONDITION

    by Anton Zarichnyi, Olena Usychenko

    Summary. The article substantiates the relevance of creating innovative approaches to monitoring the condition of road pavement in Ukraine, where a significant part of the road network is in poor condition, while traditional diagnostic methods are characterized by high costs and limited scalability. The aim of the research is to develop a concept of a smartphone-based monitoring system that utilizes built-in sensors (accelerometer, gyroscope, GPS) to collect and analyze telemetry data in real time. The study reviews modern methods of pavement evaluation, outlines the technical aspects of sensor data collection, filtering, and processing, and identifies key metrics such as Root Mean Square Acceleration ( 𝑅𝑀𝑆𝐴 ), peak values, and spectral features of the signal. A prototype Android application was developed to record sensor data in CSV format, which was further processed in Python using libraries such as pandas, numpy, scipy, matplotlib, and folium. The results demonstrated the sensitivity of the system to differences in road quality: for smooth segments, 𝑅𝑀𝑆𝐴 values ranged from 0.3 to 1.5 m/s², while for damaged areas they exceeded 4 m/s². Visualization on interactive maps confirmed the practical applicability of the method for identifying defects such as potholes, cracks, and manholes. The novelty of the research lies in combining sensor monitoring methods with crowdsourcing concepts, which enables large-scale data collection without the need for expensive equipment. The practical value is defined by the economic feasibility of using smartphones as measuring devices and the possibility of integration into urban transport and smart city platforms. Future research directions include improving data normalization algorithms, considering vehicle type and speed, and applying machine learning models (XGBoost, RandomForest, CNN) for defect classification. Keywords: road pavement, smartphone, sensors, accelerometer, 𝑅𝑀𝑆𝐴, monitoring, vibration analysis, machine learning.


  • Method of physical and functional wear assessment in determining the quality condition of road bridges

    by Bohdan Zelenskyi, Inessa Rutkovska, Olena Slavinska, Olena Usychenko

    Introduction. Assessment of the qualitative condition of road bridges is a complex process that involves the analysis of physical and functional deterioration of structures. Physical deterioration is associated with deterioration of materials and loss of strength of elements, while functional deterioration is manifested in a decrease in the bearing capacity and deformability of the bridge. Problems. To determine the level of wear, a comprehensive method is used, including visual inspection, calculation estimates and experimental studies. In addition, a differentiated method is used, which allows comparing actual values with design values and drawing conclusions about the quality of individual elements and the structure as a whole. Objective. The expert method is an important addition to other methods of assessing the technical condition of bridges.


  • Open Access

    THE METHODS OF THE SORBED QUANTITY OF THE DIFFUSION COEFFICIENTS AND POLYMERS LIQUID AREAS

    by Olena Slavinska, Olena Usychenko, Bohdan Zelenskyi

    The article presents the application of a method for assessing the qualitative state of bridges based on the use of qualimetry methods. The proposed approach considers a wide range of parameters that affect the functioning and reliability of road bridges. The method involves the use of a qualimetric model that allows systematizing and structuring of information about the physical condition of individual bridge elements and functional indicators. The weighting of the parameters was determined using expert and estimated methods, which increased the accuracy and objectivity of the assessment. The development of a qualitative condition model includes the following stages: identification of bridge elements, determination of assessment parameters, development of a qualimetric model, determination of weighting coefficients for each criterion, analysis of the results of a specific object inspection, and determination of the overall operational condition of the bridge. The results of the study show that the proposed methodology can be effectively used to assess the condition of bridges, providing a sufficiently high accuracy and completeness of the assessment. This contributes to improving the safety and reliability of bridge structures, reducing accidents and optimizing their maintenance costs. The proposed assessment method has prospects for implementation in the practice of bridge condition management and can be further applied in the system of monitoring the condition of transport facilities.

  • THEORETICAL AND EXPERIMENTAL STUDIES OF THE STABILITY OF A REINFORCED SOIL RETAINING WALL ON A WEAK BASE

    by Olena Usychenko, Rostyslav Plytus

    Summary. The purpose of the proposed article is to describe a practical example, experimental and theoretical analysis of strengthening weak soils with geogrids in the base based on field studies of a reinforced soil structure near an overpass. The authors present practical data from field studies of settlement of a reinforced soil structure reinforced with a stabilizing geogrid. The actual data of monitoring the settlement of the structure during two years of operation are presented. The calculated and actual data on the structure near the overpass at km 759+149 of the public road of national importance M-12 are analyzed. Sufficient previous experience in the design of ground structures with geosynthetic reinforcement with geogrids makes it possible to monitor facilities during operation, and a more detailed understanding of the mechanics of operation and calculation methods for such structures allows for the improvement and optimization of such structures at the design stage through monitoring work. The authors have proven that the use of a stabilizing mattress under a 9-meter-high reinforced concrete structure allowed for uniform settlement of the structure and to predict settlement processes during the commissioning of the structure. Clear field data on the settlement of the structure are provided, which have minimal discrepancies with the calculated ones. Such a monitoring approach allows optimizing design solutions, which may reduce the overconsumption of geogrids in reinforced soil structures, and optimizing design parameters, namely the reinforcement pitch and the length of the reinforcing layer, which affects the project cost and labor intensity of the work. Keywords: reinforced soil structures, geogrids, geosynthetic materials, soil stabilization, strengthening of weak foundations, retaining wall, geomattress.

  • THE STUDY OF THE INFLUENCE OF TRAFFIC INTENSITY AND TRAFFIC FLOW COMPOSITION ON THE CAPACITY OF MOTOR ROADS AND BRIDGE CROSSINGS

    by Liudmyla Bondarenko, Vitalii Stozhka, Alina Sevostianova, Alona Shpyh, Olena Usychenko

    Annotation: The study presents the results of the research of the impact of traffic intensity and traffic flow composition on the capacity of highways and bridge crossings based on mathematical and numerical modeling methods. The main factors affecting the capacity of highways and bridge crossings have been identified. The methodology for determining the level of traffic and capacity of highways approved by the State Service of Highways (now the Restoration Agency) was adopted as the main calculation basis for numerical modeling. Also, for calculations, updated statistical data, given in open literary sources, were used. 11 test options with different composition of the traffic flow were considered: from 0% to 100% of the share of passenger cars in the composition of the traffic flow. The average speed of the traffic flow was determined depending on the geometric parameters of the road - the radii of the horizontal curves in the plan and the longitudinal slope of the carriageway. It is shown that the average speed of the traffic flow increases with an increase in the value of the radius of the horizontal curve and with a decrease in the value of the longitudinal slope of the carriageway of the road, which is due to the improvement of traffic safety conditions and the possibility of moving vehicles at higher speeds. Also, the results of the numerical modeling showed an increase in the average speed of the traffic flow with an improvement in the level of coverage of the road (bridge crossing). It is shown that an increase in the share of cars in the traffic flow leads to an increase in the average speed of the entire traffic flow, which is explained by their more "compact" dimensions, compared to trucks, buses and road trains. The smallest practical carrying capacity of a highway or bridge crossing corresponds to a column of cars at the speed of free movement. The highest practical throughput corresponds to the traffic intensity at the minimum interval (optimal speed). Also, with an increase in the traffic flow of trucks and large-sized vehicles, the capacity of the road decreases. This determines the relevance of research in the direction of developing load models based on the actual parameters of heavy-duty rolling stock when determining the load-carrying capacity of highways and overpasses. Key words: highway, bridge crossing, throughput, mathematical modeling.