This study investigates the process that ensures durability of road surface by using epoxy asphalt concrete with optimal physical and mechanical characteristics. The task addressed relates to the lack of detailed research into the simultaneous influence of several key factors on the physical and mechanical properties of epoxy asphalt concrete, in particular the content of epoxy components in the bitumen binder, the temperature and duration of hardening. In addition, there is no scientific justification for the optimal mutual combination of these parameters in order to increase the durability of road surface for transport structures. For this purpose, epoxy asphalt concrete was used as a building material for the road surface on transport structures. It was established that due to the thermosetting nature of the epoxy-modified bitumen binder, the material acquires fundamentally higher indicators of rutting resistance, crack resistance, frost resistance, water resistance, and resistance to chemical aggression compared to conventional materials. A full multifactorial experiment was conducted with varying the content of epoxy components in bitumen (5–25) %, curing time (1–14) days, as well as curing temperature (25–60)°C. The influence of these factors on water saturation, compressive strength at temperatures of 20°C and 50°C, indirect tensile strength at a temperature of 0°C was studied. Adequate second-order regression models were built; the relative prediction error is less than 5%. The optimal parameters were established using the desirability function method: the content of epoxy components – 15.0%; curing time – 7 days; curing temperature – 40°C. The rational range is 13–17%, 6–8 days, and 35–55°C. At these values, the regulatory requirements from DBN V.2.3-4:2015, DBN V.2.3-22:2025, and DSTU 9290-5:2020 are exceeded, which contributes to the extension of repair intervals, reduction of operating costs, and increased road safety. These results could also be used in the future to devise technological regulations for the production of epoxy asphalt concrete mixtures for their practical implementation in the road sector