DLDario Lopez-Pintor

Dario Lopez-Pintor

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Dario Lopez-Pintor has a total of 73 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A coupled 1D jet-reactor framework for simulating ammonia and ammonia-hydrogen jet ignition in hot co-flow conditions

    by Tyler Strickland, Dario Lopez-Pintor, Robert Dibble, Jose Maria Garcia-Oliver, Rajavasanth Rajasegar

  • Numerical simulation and experimental measurements of combustion of a gasoline certification fuel and its surrogate blended with isobutanol

    by Songtao Guo, Yujie Wang, Liang Ji, Dario Lopez-Pintor, Alberto Cuoci, C. Thomas Avedisian, Alessio Frassoldati, Kalyanasundaram Seshadri

  • Detailed chemical kinetic analysis of flame speed using surrogates of low-carbon gasoline fuels

    by Dario Lopez Pintor, James MacDonald, Abhinandhan Narayanan, Naoyoshi Matsubara, Koji Kitano, Ryota Yamada, Kenji Sugata

    Low-carbon gasoline fuels are one of the most promising approaches to reduce the carbon footprint of the transportation sector. Despite the fact that drop-in fuels can be produced by methods such as methanol-to-gasoline (MTG), ethanol-to-gasoline (ETG) or biomass hydrothermal processing, it is unclear how the composition of the fuel may affect engine performance and emissions. In fact, differences between low-carbon and petroleum gasoline have been observed experimentally and reported in the literature, including differences in deflagration speed and burning rate. However, to the best of the authors’ knowledge, the chemical kinetic mechanisms responsible for these differences have not been studied with detailed chemistry before. This is in part caused by the computational cost of solving tens of thousands of conservation of species and diffusion equations in 1-D flame simulations, which prevents detailed chemical kinetic mechanisms from being used in these simulations. Thus, reduced models are used in laminar flame speed simulations, leading to chemical analyses that may be incomplete, since the chemistry in reduced mechanisms is heavily simplified. To solve this issue, a novel approach to study fuel decomposition, rate of production and chemical sensitivity at laminar flame speed like conditions with detailed chemistry was developed in this work. The approach consists of imposing the temperature profile and residence time across the flame in a plug flow reactor to simulate fuel decomposition at flame conditions (including residence time of each fuel molecule at each pressure-temperature conditions within the flame). This approach showed a very low computational cost even with highly detailed chemistry (tens of thousands of reactions), allowing in-depth analyses of the chemistry within the flame. Rate of production and sensitivity analyses were performed for multiple single-component fuels typically found in gasoline composition, for regular-grade E10 (10%vol ethanol) petroleum gasoline, MTG, ETG and biomass-derived renewable gasoline surrogates following this approach. Simulations at engine-like conditions showed that the flame accelerates instants before knock occurs due to a combination of energy and radicals released by the low-temperature chemistry of the end gas, with radical production in the reactants upstream the flame being the dominant factor. Sensitivity analyses showed that flame deflagration is controlled by reactions that generate atomic hydrogen, whereas reactions that act as a sink of atomic hydrogen (such as methyl radical recombination) are detrimental for flame speed. Species sensitivity showed that laminar flame speed is strongly sensitivity to the production of vinyl radical within the flame because vinyl radicals rapidly decompose and release atomic H and atomic O in the reaction zone of the flame. Finally, metrics to correlate the flame speed of a fuel with the formation of key species within the flame are explored.

  • Open Access

    Fuel Composition Effects on Particulate Formation from GDI Spray Collapse during Engine Warm Up

    by Sanguk Lee, Darío López-Pintor, Lyle M. Pickett, Gina Fioroni, Nimal Naser, Junqing Zhu, Gregory Lilik

    Understanding the mechanisms that control soot formation in modern direct-injection spark-ignition engines is necessary to mitigate engine tailpipe particulate matter (PM) emissions, particularly at cold-start conditions and during engine warm-up. Past work has shown that elevated PM emissions are correlated with the presence of sooting flames both in the bulk gas and as pool fires on the walls of the cylinder. Understanding the role that fuel properties, fuel composition, and engine operating conditions play for spray-wall interactions, film formation and soot formation is critical to develop new fuel-engine solutions.In this work, experiments were performed in an optical engine and spray vessel to assess the impact of fuel properties, fuel composition, and operating conditions on spray morphology and soot formation via optical diagnostics. Engine-out particulate number (PN) and PM emission measurements were made simultaneous to the optical measurements. A baseline regular-grade E10 (10%vol ethanol) research gasoline was blended with variable amounts of cyclopentane and with a light, low-soot gasoline to vary both soot propensity and physical properties, and coolant temperature sweeps were performed at different injection timings and with single and multi-injection strategies. Results indicated that soot formation was controlled by two different mechanisms: pool fires resulting from strong fuel-wall interactions, which dominated at early injection timings, and fuel-rich flames near the spark plug, which dominated at late injection timings. When soot formation was controlled by pool fires, increasing coolant temperature or fuel volatility both led to lower soot emissions. However, starting from conditions where soot formation was controlled by rich regions near the spark plug, increasing coolant temperature or fuel volatility led to higher soot emissions because the spray tended to collapse more, reducing the vaporization rate, increasing the liquid penetration and, therefore, increasing the formation of fuel films and soot. Multi-injection strategies have shown to be an effective approach to decreasing soot emissions at all conditions tested. A 1-D spray model modified to account for spray collapse effects on liquid penetration was used to understand the engine results and to develop a phenomenological model of soot formation for DISI engine combustion at spray-collapsing conditions.

  • Open Access

    An analysis of alcohol compression ignition strategies on different engine platforms

    by Brian Gainey, Benjamin Lawler, Ankur Bhatt, Kunal Vedpathak, Sebastian Verhelst, Quinten Dejaegere, Martin Tunér, Adam Dempsey, Jared Zeman, Tyler Johnston, et al.

  • Open Access

    Modeling Fuel Effects on Aero Engine Out Gas Phase and Soot Emissions

    by Zuhayr Pasha Mohammed, Darío López-Pintor, James MacDonald, Subith Vasu, Elkin Ramirez-Correa, Jose M. Garcia-Oliver, Pénélope Leyland

    Implementing synthetic aviation turbine fuels (SATFs) in commercial jet engines requires an extensive understanding of fuel effects on the emissions, performance, stability and reliability of the engine. Detailed chemical kinetics analysis is a powerful tool to study fuel effects and fuel-engine interactions. However, using detailed chemistry in 3-dimensional computational fluid dynamics simulations is prohibitive. 1-dimensional engine models combined with detailed chemical mechanisms show a promising approach for analyzing fuel effects with reasonable computational cost.Using, a previously developed and validated 0D-1D combustor model of a CFM56-7B turbofan jet engine has been extended to include the turbomachinery and nozzle components, allowing for an analysis of engine-out emissions. An optimized gas-phase chemical kinetic mechanism, which includes nitrogen and sulfur oxides chemistry, was developed by reducing a comprehensive mechanism from 8365 to 896 species. A sectional method approach was combined with detailed soot chemistry to model soot emissions. Multiple soot chemistry models were evaluated, leading to orders of magnitude different particulate mass results, showing the complexity of accurately simulating soot. The final model, validated against experimental measurements of Jet-A’s combustor exhaust temperature, nitrogen oxides (NOx), carbon monoxide (CO), and soot. After validation, three previously developed SATF surrogate fuels for ATJ (Alcohol-to-Jet), IPK (Iso-Paraffinic Kerosene), and a blend of ATJ and IPK were compared with a Jet-A surrogate across the operating conditions of the Landing and Take-Off (LTO) cycle. Across all cases, the SATFs preformed similarly to each other. SATF showed slightly lower NOx and CO than Jet-A at take-off, but the differences are marginal. Despite showing a 15x decrease in 4-ring polycyclic aromatic hydrocarbons (PAH) at take-off conditions, which led to 60x lower soot nucleation rate, the particulate mass of SATF remained only 4.2 times lower than that of Jet-A. This is because soot emissions were mainly controlled by growth and PAH condensation rather than nucleation at these conditions, and the contribution of mono-aromatics to soot growth via condensation of benzene and phenylacetylene was similar in both SATF and Jet-A cases. Sulfur oxides (SOx) chemistry was analyzed and results showed that modeling the turbomachinery and nozzle was required to capture sulfuric acid formation.

  • Open Access

    Fuel Effects on Aviation Engine Emissions: A Chemical Reactor Network Modeling Study

    by Dario Lopez-Pintor, James MacDonald, Elkin Ramirez-Correa, Jose Maria Garcia-Oliver, Raul Payri, Pedro Marti Gomez-Aldaravi, Pénélope Leyland

    The present study investigates the formulation of surrogates for Jet-A and sustainable aviation fuel (SAF) by means of a chemical reactor network (CRN) to predict emissions in gas-turbine combustors. The modeling framework is used to analyze the effects of fuel composition, specifically the replacement of Jet-A with SAF as well as the substitution of aromatics in Jet-A with cycloalkanes. This approach enables the examination of the effects of the fuel class and molecular structure independently of global exhaust emission trends. A comprehensive chemical kinetic mechanism incorporating 8478 species and 33,318 reactions was used to model jet fuel surrogates. This mechanism, validated against ignition delay times, laminar flame speeds, and extinction strain rates, accurately predicted combustion characteristics for iso-cetane and iso-dodecane, key components of SAF. Surrogate fuels for Jet-A and alternative fuels were formulated targeting critical properties such as density and cetane number. Surrogate simulation results show strong alignment with experimental data on ignition delay and flame speed, further confirming the reliability of the surrogates. The CRN model was developed using the CFM56 engine data and validated against the International Civil Aviation Organization emission benchmarks. After that, two different fuel replacement scenarios, involving Jet-A, are investigated. In the first one, Jet-A is compared to 100% SAF, which helps assess expected differences in combustion performance if a fully renewable fueling supply is followed. Results show that NO x emissions are unaffected by SAF, aligning with previous experimental studies. Polycyclic aromatic hydrocarbons (PAH) decrease by 93% for SAF compared to Jet-A, while Jet-A produces more CO due to its aromatic content. Substituting aromatics with cycloalkanes in Jet-A reduces PAH emissions by up to 96 or 92%, depending on whether all aromatics are replaced or only diaromatics. In a second scenario, aromatics are removed from conventional Jet-A and replaced with cycloalkane species, which can still hold the swelling properties needed by the fueling system. In terms of combustion, cycloalkane substitution leads to slightly increased CO emissions and reduced flame temperatures. These results demonstrate the potential of SAFs and cycloalkanes in reducing soot precursors while maintaining a highly similar performance in the combustion process. Overall, the proposed CRN framework provides a good example of how a predictive and computationally efficient tool can help in the early evaluation of alternative aviation fuels under realistic gas-turbine combustor conditions.


  • Open Access

    A data-driven approach for predicting the cetane number of renewable and unconventional fuels

    by Ana Larrañaga, James R. MacDonald, Steven L. Brunton, Jacobo Porteiro, Dario Lopez-Pintor

  • Effects of fuels, additives and injection equipment on spray development and soot formation

    by Rami Abboud, Sanguk Lee, Dario Lopez Pintor, Eshan Singh, James MacDonald, Magnus Sjoberg