JMJames MacDonald

James MacDonald

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


James MacDonald has a total of 25 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Modeling Fuel Effects on Aero Engine Out Gas Phase and Soot Emissions

    by Zuhayr Pasha Mohammed, Darío López-Pintor, James MacDonald, Subith Vasu, Elkin Ramirez-Correa, Jose M. Garcia-Oliver, Pénélope Leyland

    Implementing synthetic aviation turbine fuels (SATFs) in commercial jet engines requires an extensive understanding of fuel effects on the emissions, performance, stability and reliability of the engine. Detailed chemical kinetics analysis is a powerful tool to study fuel effects and fuel-engine interactions. However, using detailed chemistry in 3-dimensional computational fluid dynamics simulations is prohibitive. 1-dimensional engine models combined with detailed chemical mechanisms show a promising approach for analyzing fuel effects with reasonable computational cost.Using, a previously developed and validated 0D-1D combustor model of a CFM56-7B turbofan jet engine has been extended to include the turbomachinery and nozzle components, allowing for an analysis of engine-out emissions. An optimized gas-phase chemical kinetic mechanism, which includes nitrogen and sulfur oxides chemistry, was developed by reducing a comprehensive mechanism from 8365 to 896 species. A sectional method approach was combined with detailed soot chemistry to model soot emissions. Multiple soot chemistry models were evaluated, leading to orders of magnitude different particulate mass results, showing the complexity of accurately simulating soot. The final model, validated against experimental measurements of Jet-A’s combustor exhaust temperature, nitrogen oxides (NOx), carbon monoxide (CO), and soot. After validation, three previously developed SATF surrogate fuels for ATJ (Alcohol-to-Jet), IPK (Iso-Paraffinic Kerosene), and a blend of ATJ and IPK were compared with a Jet-A surrogate across the operating conditions of the Landing and Take-Off (LTO) cycle. Across all cases, the SATFs preformed similarly to each other. SATF showed slightly lower NOx and CO than Jet-A at take-off, but the differences are marginal. Despite showing a 15x decrease in 4-ring polycyclic aromatic hydrocarbons (PAH) at take-off conditions, which led to 60x lower soot nucleation rate, the particulate mass of SATF remained only 4.2 times lower than that of Jet-A. This is because soot emissions were mainly controlled by growth and PAH condensation rather than nucleation at these conditions, and the contribution of mono-aromatics to soot growth via condensation of benzene and phenylacetylene was similar in both SATF and Jet-A cases. Sulfur oxides (SOx) chemistry was analyzed and results showed that modeling the turbomachinery and nozzle was required to capture sulfuric acid formation.

  • Open Access

    Fuel Effects on Aviation Engine Emissions: A Chemical Reactor Network Modeling Study

    by Dario Lopez-Pintor, James MacDonald, Elkin Ramirez-Correa, Jose Maria Garcia-Oliver, Raul Payri, Pedro Marti Gomez-Aldaravi, Pénélope Leyland

    The present study investigates the formulation of surrogates for Jet-A and sustainable aviation fuel (SAF) by means of a chemical reactor network (CRN) to predict emissions in gas-turbine combustors. The modeling framework is used to analyze the effects of fuel composition, specifically the replacement of Jet-A with SAF as well as the substitution of aromatics in Jet-A with cycloalkanes. This approach enables the examination of the effects of the fuel class and molecular structure independently of global exhaust emission trends. A comprehensive chemical kinetic mechanism incorporating 8478 species and 33,318 reactions was used to model jet fuel surrogates. This mechanism, validated against ignition delay times, laminar flame speeds, and extinction strain rates, accurately predicted combustion characteristics for iso-cetane and iso-dodecane, key components of SAF. Surrogate fuels for Jet-A and alternative fuels were formulated targeting critical properties such as density and cetane number. Surrogate simulation results show strong alignment with experimental data on ignition delay and flame speed, further confirming the reliability of the surrogates. The CRN model was developed using the CFM56 engine data and validated against the International Civil Aviation Organization emission benchmarks. After that, two different fuel replacement scenarios, involving Jet-A, are investigated. In the first one, Jet-A is compared to 100% SAF, which helps assess expected differences in combustion performance if a fully renewable fueling supply is followed. Results show that NO x emissions are unaffected by SAF, aligning with previous experimental studies. Polycyclic aromatic hydrocarbons (PAH) decrease by 93% for SAF compared to Jet-A, while Jet-A produces more CO due to its aromatic content. Substituting aromatics with cycloalkanes in Jet-A reduces PAH emissions by up to 96 or 92%, depending on whether all aromatics are replaced or only diaromatics. In a second scenario, aromatics are removed from conventional Jet-A and replaced with cycloalkane species, which can still hold the swelling properties needed by the fueling system. In terms of combustion, cycloalkane substitution leads to slightly increased CO emissions and reduced flame temperatures. These results demonstrate the potential of SAFs and cycloalkanes in reducing soot precursors while maintaining a highly similar performance in the combustion process. Overall, the proposed CRN framework provides a good example of how a predictive and computationally efficient tool can help in the early evaluation of alternative aviation fuels under realistic gas-turbine combustor conditions.


  • Open Access

    A data-driven approach for predicting the cetane number of renewable and unconventional fuels

    by Ana Larrañaga, James R. MacDonald, Steven L. Brunton, Jacobo Porteiro, Dario Lopez-Pintor

  • Effects of fuels, additives and injection equipment on spray development and soot formation

    by Rami Abboud, Sanguk Lee, Dario Lopez Pintor, Eshan Singh, James MacDonald, Magnus Sjoberg

  • A chemical kinetic analysis of knock propensity of methanol-to-gasoline fuel

    by James MacDonald, Dario Lopez-Pintor, Naoyoshi Matsubara, Koji Kitano, Ryota Yamada


  • Open Access

    On the modes of nanosecond pulsed plasmas for combustion ignition of quiescent CH4-air mixtures

    by Chunqi Jiang, Akash C Dhotre, Meimei Lai, Sayan Biswas, James R MacDonald, Isaac W Ekoto

    The effect of transient plasma modes on ignition kernel development are discussed here for a quiescent CH4-air combustion model system. A 10 ns high-voltage pulse was applied to a pin-to-pin electrode in lean fuel-air mixtures at room temperature and atmospheric pressure. High-impedance streamer, transient spark and low-impedance spark discharges were identified based on pulse waveforms of voltage and current. A sustained ignition kernel expansion was observed when the plasma discharge transitioned into a transient spark or spark discharge. The minimum ignition energy was obtained at the transient spark mode, which has less than a third of the energy or Coulomb transfer compared to the low-impedance spark. Employing repetitive 10-pulse sequence at 10 kHz, the lean-fuel limit was extended from an equivalence ratio of 0.6 for the single pulse ignition to 0.5. The use of repetitive pulses also allowed streamer breakdown or spark initiation to occur at a lower voltage.