Ferhat Benmahiddine
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Ferhat Benmahiddine has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Rafik Belarbi
LaSIE, UMR-7356 CNRS, La Rochelle University, Avenue Michel Crépeau, 17042 La Rochelle Cedex 1, France
8 shared publications - Ameur El Amine Hamami
Laboratoire des Sciences de l’Ingénieur pour l’Environnement (LaSIE), UMR CNRS 7356, La Rochelle University
6 shared publications - Sofiane Belhabib
Université de Nantes, Oniris, CNRS, GEPEA, UMR 6144, F-44000 Nantes, France
5 shared publications - Sofiane Guessasma
UR1268 Biopolymères Interactions Assemblages, INRAE, F-44316 Nantes, France
5 shared publications Abdelkader Tahakourt
2 shared publications- Anis Bahar
Department of Mechanical Engineering, IUT Nantes, Nantes Université, Oniris, CNRS, GEPEA, UMR 6144, F-44000 Nantes, France
2 shared publications
Latest Publications
- 6 April 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Études des transferts couplés de chaleur, d’air et d’humidité par des techniques de changement d’échelle (microscopique-macroscopique) : Application à l’évaluation de la performance énergétique et la durabilité des matériaux de construction
Ce travail a pour objectif l’étude des transferts de chaleur, d’air et d’humidité au sein des matériaux biosourcés. La prise en compte de l’incidence des phénomènes de vieillissement, du gonflement et de l’hystérésis dans la modélisation numérique et expérimentale de ces mécanismes au sein des éco-matériaux d’enveloppe du bâtiment tels que le béton de chanvre et le béton de lin a été entreprise. Sur le volet expérimental, une campagne de caractérisation fine a été effectuée au laboratoire. Le but de cette dernière est d’étudier, d’une part, les performances de ces matériaux à l’état sain pour pouvoir ensuite analyser leur réponse face à des sollicitations climatiques extrêmes, par l’application des protocoles de vieillissement accéléré (immersion/séchage, immersion/gel/séchage et humidification / séchage). Et d’autre part, de mettre en évidence l’impact de ces derniers sur l’évolution des propriétés des matériaux et sur le comportement hygrothermique et mécanique des bâtiments. L’analyse des résultats a montré que les propriétés thermo-hydro-mécaniques du béton de chanvre dépendent de sa microstructure et principalement de la cohésion de l'interface liant/chènevotte. Aussi, les observations par microscopie numérique et par la microscopie électronique à balayage ont mis en exergue l’apparition de fissures au niveau des interfaces et une augmentation maximale de 6% de la porosité totale. Ces changements de la microstructure ont engendré : (i) Une réduction des valeurs : du facteur de la résistance à la diffusion d’humidité, du tampon hydrique (MBV) et celle de la résistance à la compression (-51%) ;(ii) Une augmentation de la perméabilité à la vapeur d'eau (+38%) et de la profondeur de pénétration. L'analyse chimique effectuée sur les solutions d'immersion a confirmé la présence du Calcium, du Potassium et du Magnésium. Ces derniers résultent de la dissolution et de la lixiviation de certains hydrates initialement présents dans la matrice solide. Par ailleurs, l'analyse thermogravimétrique (ATG) a montré que la chènevotte et le liant, qu'ils soient vieillis ou non, présentent le même comportement à haute température.Sur le volet numérique, un modèle de transferts couplés de chaleur, d’air et d’humidité a été développé puis validé en comparant les résultats des simulations obtenues avec ceux issus des expérimentations réalisées au laboratoire. L’avantage de ce modèle réside dans le fait que tous ses paramètres d’entrées ont été considérés variables en fonction de la température et de l’état hydrique du matériau. Leur détermination a été rendue possible grâce aux bancs d’essais disponibles au laboratoire. Les propriétés vieillies et non vieillies obtenues lors de la phase de caractérisation ont été utilisées pour implémenter le modèle et étudier ainsi l’incidence du vieillissement sur le comportement hygrothermique de diverses configurations du béton de chanvre. Les résultats ont révélé des écarts sensibles entre les valeurs des humidités relatives d’environ 18%. De même, la prédiction des déformations de ces matériaux biosourcés issues des sollicitations hygrothermiques a été effectuée suite à la prise en compte, dans la modélisation, des effets mécaniques. La validation du modèle ainsi obtenu a été effectuée moyennant le recours à une approche microscopique basée sur l’observation par micro-tomographie aux rayons X conjuguée à l’utilisation des techniques de traitement d’image (2D). Enfin, la prise en compte du phénomène d’hystérésis d’adsorption et de désorption a été également entreprise à différentes échelles : matériau-paroi-bâtiment. Cela a permis non seulement d’améliorer la qualité de la prédiction des modèles numériques du comportement hygrothermique de ces matériaux, mais aussi de mettre en évidence les effets de ce phénomène sur les performances énergétiques et environnementales des bâtiments.
- 6 April 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Études des transferts couplés de chaleur, d’air et d’humidité par des techniques de changement d’échelle (microscopique-macroscopique) : Application à l’évaluation de la performance énergétique et la durabilité des matériaux de construction
Ce travail a pour objectif l’étude des transferts de chaleur, d’air et d’humidité au sein des matériaux biosourcés. La prise en compte de l’incidence des phénomènes de vieillissement, du gonflement et de l’hystérésis dans la modélisation numérique et expérimentale de ces mécanismes au sein des éco-matériaux d’enveloppe du bâtiment tels que le béton de chanvre et le béton de lin a été entreprise. Sur le volet expérimental, une campagne de caractérisation fine a été effectuée au laboratoire. Le but de cette dernière est d’étudier, d’une part, les performances de ces matériaux à l’état sain pour pouvoir ensuite analyser leur réponse face à des sollicitations climatiques extrêmes, par l’application des protocoles de vieillissement accéléré (immersion/séchage, immersion/gel/séchage et humidification / séchage). Et d’autre part, de mettre en évidence l’impact de ces derniers sur l’évolution des propriétés des matériaux et sur le comportement hygrothermique et mécanique des bâtiments. L’analyse des résultats a montré que les propriétés thermo-hydro-mécaniques du béton de chanvre dépendent de sa microstructure et principalement de la cohésion de l'interface liant/chènevotte. Aussi, les observations par microscopie numérique et par la microscopie électronique à balayage ont mis en exergue l’apparition de fissures au niveau des interfaces et une augmentation maximale de 6% de la porosité totale. Ces changements de la microstructure ont engendré : (i) Une réduction des valeurs : du facteur de la résistance à la diffusion d’humidité, du tampon hydrique (MBV) et celle de la résistance à la compression (-51%) ;(ii) Une augmentation de la perméabilité à la vapeur d'eau (+38%) et de la profondeur de pénétration. L'analyse chimique effectuée sur les solutions d'immersion a confirmé la présence du Calcium, du Potassium et du Magnésium. Ces derniers résultent de la dissolution et de la lixiviation de certains hydrates initialement présents dans la matrice solide. Par ailleurs, l'analyse thermogravimétrique (ATG) a montré que la chènevotte et le liant, qu'ils soient vieillis ou non, présentent le même comportement à haute température.Sur le volet numérique, un modèle de transferts couplés de chaleur, d’air et d’humidité a été développé puis validé en comparant les résultats des simulations obtenues avec ceux issus des expérimentations réalisées au laboratoire. L’avantage de ce modèle réside dans le fait que tous ses paramètres d’entrées ont été considérés variables en fonction de la température et de l’état hydrique du matériau. Leur détermination a été rendue possible grâce aux bancs d’essais disponibles au laboratoire. Les propriétés vieillies et non vieillies obtenues lors de la phase de caractérisation ont été utilisées pour implémenter le modèle et étudier ainsi l’incidence du vieillissement sur le comportement hygrothermique de diverses configurations du béton de chanvre. Les résultats ont révélé des écarts sensibles entre les valeurs des humidités relatives d’environ 18%. De même, la prédiction des déformations de ces matériaux biosourcés issues des sollicitations hygrothermiques a été effectuée suite à la prise en compte, dans la modélisation, des effets mécaniques. La validation du modèle ainsi obtenu a été effectuée moyennant le recours à une approche microscopique basée sur l’observation par micro-tomographie aux rayons X conjuguée à l’utilisation des techniques de traitement d’image (2D). Enfin, la prise en compte du phénomène d’hystérésis d’adsorption et de désorption a été également entreprise à différentes échelles : matériau-paroi-bâtiment. Cela a permis non seulement d’améliorer la qualité de la prédiction des modèles numériques du comportement hygrothermique de ces matériaux, mais aussi de mettre en évidence les effets de ce phénomène sur les performances énergétiques et environnementales des bâtiments.
- 20 September 2023
- Published by Elsevier in Building and Environment
- Vol. 245
Development and hygrothermal performance analysis of a novel eco-friendly insulating wall under various climatic conditions
- 20 September 2023
- Published by Elsevier in Building and Environment
- Vol. 245
Development and hygrothermal performance analysis of a novel eco-friendly insulating wall under various climatic conditions
- Open Access
The Thermal and Mechanical Behaviour of Wood-PLA Composites Processed by Additive Manufacturing for Building Insulation
This study was aimed at considering the potential of wood-based composites processed using additive manufacturing as insulators in the building sector. A polylactic acid blend with 30% wood particles was used as a feedstock material in fused filament technology. Its thermal and mechanical properties were determined for various processing conditions, including printing temperature and infill rate. The results showed a minor contraction in its tensile performance as a result of the printing process. The printing temperature had a negligible effect on its stiffness and a limited influence on the other engineering constants, such as the tensile strength and ultimate stress. The thermal properties of printed structures have been found to significantly depend on the infill rate. Although the tested 3D printed wood-PLA material exhibited good thermal properties, which were tuneable using the printing conditions, its performance was still 38% to 57% lower compared to insulators such as the glass wool of the synthetic foams used in the building sector.
Open AccessThe Thermal and Mechanical Behaviour of Wood-PLA Composites Processed by Additive Manufacturing for Building Insulation
This study was aimed at considering the potential of wood-based composites processed using additive manufacturing as insulators in the building sector. A polylactic acid blend with 30% wood particles was used as a feedstock material in fused filament technology. Its thermal and mechanical properties were determined for various processing conditions, including printing temperature and infill rate. The results showed a minor contraction in its tensile performance as a result of the printing process. The printing temperature had a negligible effect on its stiffness and a limited influence on the other engineering constants, such as the tensile strength and ultimate stress. The thermal properties of printed structures have been found to significantly depend on the infill rate. Although the tested 3D printed wood-PLA material exhibited good thermal properties, which were tuneable using the printing conditions, its performance was still 38% to 57% lower compared to insulators such as the glass wool of the synthetic foams used in the building sector.
- 11 March 2023
- Published by Springer Nature
- p. 30-37
Effect of the Formulation on the Hydric and Mechanical Properties of Flax Concrete: Comparison with Hemp Concrete
- 11 March 2023
- Published by Springer Nature
- p. 30-37
Effect of the Formulation on the Hydric and Mechanical Properties of Flax Concrete: Comparison with Hemp Concrete
- Open Access
Synthesis of a Starchy Photosensitive Material for Additive Manufacturing of Composites Using Digital Light Processing
In this study, digital light processing (DLP) was used to achieve 3D-printed composite materials containing photosensitive resin blended with starch and hemp fibers. The synthesis of 3D-printed composites was performed without heating, according to various material combinations ranging from pure photosensitive resin to a mixture of three phases, including resin, starch, and hemp fibers, with the weight content for each reinforcing phase reaching up to a third of the formulation. The morphology, composition, and structure of the 3D-printed composites were assessed using infrared spectroscopy, laser granulometry, X-ray diffraction, and optical and scanning electron microscopy. In addition, thermal behavior and mechanical performance were studied using calorimetry, differential scanning calorimetry, and tensile testing combined with high-speed optical imaging. The results showed that the post-curing step is a leading factor for improving the mechanical performance of the 3D-printed composites. In addition, hemp fiber or starch did not alter the tensile strength. However, the largest reinforcing effect in terms of stiffness improvement was obtained with starch. Additionally, starchy composites demonstrated the strongest dependence of heat capacity on operating temperature.
Open AccessSynthesis of a Starchy Photosensitive Material for Additive Manufacturing of Composites Using Digital Light Processing
In this study, digital light processing (DLP) was used to achieve 3D-printed composite materials containing photosensitive resin blended with starch and hemp fibers. The synthesis of 3D-printed composites was performed without heating, according to various material combinations ranging from pure photosensitive resin to a mixture of three phases, including resin, starch, and hemp fibers, with the weight content for each reinforcing phase reaching up to a third of the formulation. The morphology, composition, and structure of the 3D-printed composites were assessed using infrared spectroscopy, laser granulometry, X-ray diffraction, and optical and scanning electron microscopy. In addition, thermal behavior and mechanical performance were studied using calorimetry, differential scanning calorimetry, and tensile testing combined with high-speed optical imaging. The results showed that the post-curing step is a leading factor for improving the mechanical performance of the 3D-printed composites. In addition, hemp fiber or starch did not alter the tensile strength. However, the largest reinforcing effect in terms of stiffness improvement was obtained with starch. Additionally, starchy composites demonstrated the strongest dependence of heat capacity on operating temperature.
- Open Access
Mechanical and Thermal Properties of 3D Printed Polycarbonate
This study aims at showing the potential of additive manufacturing as a new processing route for designing future insulators in the building sector. Polycarbonate (PC) is studied as a possible candidate for designing these new insulators. This polymer offers several advantages, among them fire resistance and stability of its physical properties at high temperatures. The 3D printing of PC is attempted using fused deposition modelling technology. The printing temperature and infill rate are varied to achieve optimal mechanical and thermal characteristics. The results show that an optimal printing temperature of 280 °C is needed to achieve high tensile performance. In addition, thermal properties including thermal conductivity and effusivity increase with the increase of the infill rate in opposition to the thermal diffusivity decrease.
Open AccessMechanical and Thermal Properties of 3D Printed Polycarbonate
This study aims at showing the potential of additive manufacturing as a new processing route for designing future insulators in the building sector. Polycarbonate (PC) is studied as a possible candidate for designing these new insulators. This polymer offers several advantages, among them fire resistance and stability of its physical properties at high temperatures. The 3D printing of PC is attempted using fused deposition modelling technology. The printing temperature and infill rate are varied to achieve optimal mechanical and thermal characteristics. The results show that an optimal printing temperature of 280 °C is needed to achieve high tensile performance. In addition, thermal properties including thermal conductivity and effusivity increase with the increase of the infill rate in opposition to the thermal diffusivity decrease.
- Open Access
Hygrothermal and Microstructural Investigation of PLA and PLA-Flax Printed Structures
The aim of this work is to explore the manufacturing of insulation structures using fused filament deposition of biosourced materials. The approach considers printing of Polylactic acid (PLA) and PLA-flax (PF) structures using varied infill density and printing temperatures. Differential Scanning Calorimetry and Thermal Gravimetry analysis are performed to study thermal behaviour of PLA and PF and derive weight content of fibres within PF. Thermal measurements show a strong dependence of thermal conductivity with infill density and slightly improved thermal insulation of PF compared to PLA. Moreover, both PF and PLA show a hydrophobic behaviour unlike conventional green concretes based on hemp or flax. In addition, both scanning electron and optical microscopies show marked morphological changes induced by the laying down process for PF. This latter exhibits a more complex and tortuous microstructure compared to PLA marked by the presence of inter-filament porosity. This work concludes with superior hygrothermal properties of PLA and PF compared to other biosourced materials such as hemp or flax concrete. This work also concludes with the beneficial role of flax fibres that provides better hygrothermal properties to the printed structures as well as on the need to optimize the infill characteristics including density and cell morphology density.
Open AccessHygrothermal and Microstructural Investigation of PLA and PLA-Flax Printed Structures
The aim of this work is to explore the manufacturing of insulation structures using fused filament deposition of biosourced materials. The approach considers printing of Polylactic acid (PLA) and PLA-flax (PF) structures using varied infill density and printing temperatures. Differential Scanning Calorimetry and Thermal Gravimetry analysis are performed to study thermal behaviour of PLA and PF and derive weight content of fibres within PF. Thermal measurements show a strong dependence of thermal conductivity with infill density and slightly improved thermal insulation of PF compared to PLA. Moreover, both PF and PLA show a hydrophobic behaviour unlike conventional green concretes based on hemp or flax. In addition, both scanning electron and optical microscopies show marked morphological changes induced by the laying down process for PF. This latter exhibits a more complex and tortuous microstructure compared to PLA marked by the presence of inter-filament porosity. This work concludes with superior hygrothermal properties of PLA and PF compared to other biosourced materials such as hemp or flax concrete. This work also concludes with the beneficial role of flax fibres that provides better hygrothermal properties to the printed structures as well as on the need to optimize the infill characteristics including density and cell morphology density.
- 6 January 2022
- Published by Trans Tech Publications, Ltd. in Construction Technologies and Architecture
- Vol. 1, 555-562
Effect of Immersion/Freezing/Drying Cycles on the Hygrothermal and Mechanical Behaviour of Hemp Concrete
Hemp concrete is one of the most used bio-based materials in the construction industry due to its hygrothermal behaviour and its low environmental footprint. This is mainly due to the complexity of the microstructure of these materials and their highly breathable nature. However, their use remains limited due to the lack of databases and guarantees regarding of the evolution of their functional properties over time. In this paper, experimental investigation has been performed to answer this problematic. The aim is to investigate the influence of accelerated aging on the properties of this material through a succession of immersion/freezing/drying cycles. Materials (aged and reference) were characterized at the same relative humidity state in order to be able to compare the results and to highlight the effect of ageing on the properties of hemp concrete. Results revealed a significant change in the microstructure of this material. As a consequence, this induced significant changes in its hygrothermal and mechanical properties. An increase of 40% in water vapour permeability and decrease of 57% in compressive strength were observed after aging (07 cycles of immersion/freezing/drying).
- 6 January 2022
- Published by Trans Tech Publications, Ltd. in Construction Technologies and Architecture
- Vol. 1, 555-562
Effect of Immersion/Freezing/Drying Cycles on the Hygrothermal and Mechanical Behaviour of Hemp Concrete
Hemp concrete is one of the most used bio-based materials in the construction industry due to its hygrothermal behaviour and its low environmental footprint. This is mainly due to the complexity of the microstructure of these materials and their highly breathable nature. However, their use remains limited due to the lack of databases and guarantees regarding of the evolution of their functional properties over time. In this paper, experimental investigation has been performed to answer this problematic. The aim is to investigate the influence of accelerated aging on the properties of this material through a succession of immersion/freezing/drying cycles. Materials (aged and reference) were characterized at the same relative humidity state in order to be able to compare the results and to highlight the effect of ageing on the properties of hemp concrete. Results revealed a significant change in the microstructure of this material. As a consequence, this induced significant changes in its hygrothermal and mechanical properties. An increase of 40% in water vapour permeability and decrease of 57% in compressive strength were observed after aging (07 cycles of immersion/freezing/drying).
- Open Access
Hygrothermal and Mechanical Behaviors of Fiber Mortar: Comparative Study between Palm and Hemp Fibers
This paper presents an experimental investigation of the hygrothermal and mechanical properties of innovative mortar mixtures reinforced with natural fibers. Fibers extracted from palm stems (PS) and hemp (HF) were evaluated at different percentages. Scanning electron microscope (SEM) observations showed that the PS fibers have rough surfaces and very complex microstructures. Prior to their incorporation into the mortar, the fibers were subjected to different treatments to reduce their hydrophilic character. The employed treatments showed good efficiency in reducing the water absorption of both PS and HF fiber types. Furthermore, the mortar mixtures incorporating these fibers exhibited low thermal conductivity and excellent moisture buffering capacity. Indeed, the moisture buffer value (MBV) of the investigated mixtures ranged between 2.7 [g/(%HR·m2)] and 3.1 [g/(%HR·m2)], hence providing them excellent moisture regulator character. As expected, the fiber mortar mixtures showed very high porosity and low compressive strength ranging between 0.6 and 0.9 MPa after 28 days of age. The low-environmental footprint materials developed in this study are intended for thermal insulation and building filling.
Open AccessHygrothermal and Mechanical Behaviors of Fiber Mortar: Comparative Study between Palm and Hemp Fibers
This paper presents an experimental investigation of the hygrothermal and mechanical properties of innovative mortar mixtures reinforced with natural fibers. Fibers extracted from palm stems (PS) and hemp (HF) were evaluated at different percentages. Scanning electron microscope (SEM) observations showed that the PS fibers have rough surfaces and very complex microstructures. Prior to their incorporation into the mortar, the fibers were subjected to different treatments to reduce their hydrophilic character. The employed treatments showed good efficiency in reducing the water absorption of both PS and HF fiber types. Furthermore, the mortar mixtures incorporating these fibers exhibited low thermal conductivity and excellent moisture buffering capacity. Indeed, the moisture buffer value (MBV) of the investigated mixtures ranged between 2.7 [g/(%HR·m2)] and 3.1 [g/(%HR·m2)], hence providing them excellent moisture regulator character. As expected, the fiber mortar mixtures showed very high porosity and low compressive strength ranging between 0.6 and 0.9 MPa after 28 days of age. The low-environmental footprint materials developed in this study are intended for thermal insulation and building filling.