Tobias Koegel
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Tobias Koegel has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Martin Vossiek
Institute of Microwaves and Photonics, Friedrich-Alexander-Universitt Erlangen-Nrnberg, Erlangen, Germany
7 shared publications - Patrick Fenske
Institute of Microwaves and Photonics, Friedrich-Alexander-Universitt Erlangen-Nrnberg, Erlangen, Germany
4 shared publications - Roghayeh Ghasemi
Institute of Microwaves and Photonics, Friedrich-Alexander-Universitt Erlangen-Nrnberg, Erlangen, Germany
3 shared publications - Andre Scheder
Institute of Microwaves and Photonics, Friedrich-Alexander-Universitt Erlangen-Nrnberg, Erlangen, Germany
2 shared publications - Markus Hehn
Institute of Microwaves and Photonics, FriedrichAlexander-Universitt ErlangenNrnberg, Erlangen, Germany
2 shared publications Andreas Hofmann
Institute of Microwaves and Photonics, Friedrich–Alexander University Erlangen–Nürnberg, Erlangen, Germany
1 shared publication
Latest Publications
- Open Access
- 15 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Microwaves
- Vol. 5 (3) , 600-615
Integrated Self-Contained Trajectory Estimation and Multistatic SAR Imaging in a Non-Static Uncoupled Bistatic Radar Network
Radar imaging performance can be significantly improved by creating synthetic apertures along a radar sensor's trajectory compared to standard MIMO imaging radars. Additionally, observing the scenery from both monostatic and bistatic perspectives with large bistatic angles can further increase the information content of radar images, as different parts of complex targets can exhibit different scattering mechanisms. Both technologies, synthetic aperture radar and coherent multistatic radar networks, come with demanding system requirements regarding the localization and synchronization of the involved radars, which are addressed by the proposed approach. The unique aspect of our novel bi-/multistatic radar approach is that no auxiliary sensor technology is needed to determine the trajectory. The same radar signals are jointly used at the same time for trajectory determination, clock synchronization, and bistatic SAR imaging. The integrated self-contained trajectory estimation is based on a particle filter algorithm that processes the line-of-sight radar signals of the bistatic radar pairs, which are exchanged in a double-sided two-way ranging manner. This approach opens up new applications of bi-/multistatic radar for autonomous air and ground vehicles. However, the requirement of a line-of-sight connection between the radar pairs imposes a constraint on possible bistatic constellations and trajectories. Therefore, it is shown that suitable compromises regarding the geometry, localization accuracy, and resolution of SAR imaging must also be taken into account. We demonstrate the capabilities of this approach by generating monostatic and bistatic SAR images with 77 GHz SIMO FMCW radar sensors from indoor and outdoor measurement scenarios with synthetically generated apertures estimated by the integrated self-contained localization algorithm.
- 15 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Microwaves
- Vol. 5 (3) , 600-615
Open AccessIntegrated Self-Contained Trajectory Estimation and Multistatic SAR Imaging in a Non-Static Uncoupled Bistatic Radar Network
Radar imaging performance can be significantly improved by creating synthetic apertures along a radar sensor's trajectory compared to standard MIMO imaging radars. Additionally, observing the scenery from both monostatic and bistatic perspectives with large bistatic angles can further increase the information content of radar images, as different parts of complex targets can exhibit different scattering mechanisms. Both technologies, synthetic aperture radar and coherent multistatic radar networks, come with demanding system requirements regarding the localization and synchronization of the involved radars, which are addressed by the proposed approach. The unique aspect of our novel bi-/multistatic radar approach is that no auxiliary sensor technology is needed to determine the trajectory. The same radar signals are jointly used at the same time for trajectory determination, clock synchronization, and bistatic SAR imaging. The integrated self-contained trajectory estimation is based on a particle filter algorithm that processes the line-of-sight radar signals of the bistatic radar pairs, which are exchanged in a double-sided two-way ranging manner. This approach opens up new applications of bi-/multistatic radar for autonomous air and ground vehicles. However, the requirement of a line-of-sight connection between the radar pairs imposes a constraint on possible bistatic constellations and trajectories. Therefore, it is shown that suitable compromises regarding the geometry, localization accuracy, and resolution of SAR imaging must also be taken into account. We demonstrate the capabilities of this approach by generating monostatic and bistatic SAR images with 77 GHz SIMO FMCW radar sensors from indoor and outdoor measurement scenarios with synthetically generated apertures estimated by the integrated self-contained localization algorithm.
- Top Cited PapersOpen Access
- 9 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Instrumentation and Measurement
- Vol. 4, 1-15
Ultrahigh-Performance Radio Frequency System-on-Chip Implementation of a Kalman Filter-Based High-Precision Time and Frequency Synchronization for Networked Integrated Sensing and Communication Systems
The integration of radar sensing and imaging capabilities into future integrated sensing and communication (ISAC) networks enables advanced use cases, including autonomous vehicle navigation, real-time health monitoring, and smart city management. However, ultra-precise time and frequency synchronization is crucial for unlocking the full potential of such networked ISAC systems. In this paper, a novel real-time wireless time and frequency synchronization scheme is developed and fully implemented on a high-end radio frequency system-on-chip field-programmable gate array (FPGA) platform. The excellent performance and robustness of the proposed solution in practical applications are demonstrated. It is evidenced that the recursive nature of the Kalman filter is well-suited to the dynamic capabilities of FPGA-based simultaneous synchronization. Observed values obtained through the precision time protocol (PTP) are iteratively refined, thus effectively compensating for uncertainties encountered during a synchronization packet exchange. Due to the deterministic processing time inherent in the FPGA, the proposed synchronization method achieves exceptional precision, with clock offset deviations in the nanosecond range and clock rate deviations limited to only a few parts per billion, even across considerable distances between the network nodes.
- 9 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Instrumentation and Measurement
- Vol. 4, 1-15
Top Cited PapersOpen AccessUltrahigh-Performance Radio Frequency System-on-Chip Implementation of a Kalman Filter-Based High-Precision Time and Frequency Synchronization for Networked Integrated Sensing and Communication Systems
The integration of radar sensing and imaging capabilities into future integrated sensing and communication (ISAC) networks enables advanced use cases, including autonomous vehicle navigation, real-time health monitoring, and smart city management. However, ultra-precise time and frequency synchronization is crucial for unlocking the full potential of such networked ISAC systems. In this paper, a novel real-time wireless time and frequency synchronization scheme is developed and fully implemented on a high-end radio frequency system-on-chip field-programmable gate array (FPGA) platform. The excellent performance and robustness of the proposed solution in practical applications are demonstrated. It is evidenced that the recursive nature of the Kalman filter is well-suited to the dynamic capabilities of FPGA-based simultaneous synchronization. Observed values obtained through the precision time protocol (PTP) are iteratively refined, thus effectively compensating for uncertainties encountered during a synchronization packet exchange. Due to the deterministic processing time inherent in the FPGA, the proposed synchronization method achieves exceptional precision, with clock offset deviations in the nanosecond range and clock rate deviations limited to only a few parts per billion, even across considerable distances between the network nodes.
- Open Access
- 8 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Microwaves
- Vol. 4 (3) , 486-500
Constellation Estimation, Coherent Signal Processing, and Multiperspective Imaging in an Uncoupled Bistatic Cooperative Radar Network
Cooperative radar networks are a promising technology in various areas, such as vehicle-to-infrastructure networks for automotive radar and radar remote sensing with UAVs. The use of widely distributed radar networks enables the detection of targets with complex scattering characteristics, as their coherent bistatic images are superior for forward scattering, and each monostatic image illuminates a scene from a different perspective. This work introduces a signal processing scheme that addresses two main challenges in this area: the coherent signal processing of uncoupled radar nodes and the self-localization of the nodes for radar image combination. A comprehensive signal model that incorporates time, frequency and phase incoherency is introduced. Based on this, an algorithm for constellation estimation, synchronization up to the carrier phase level, and multiperspective imaging is developed. The proposed approach is experimentally verified using commercially available $77 \,\mathrm{G}\mathrm{Hz}$ single-input/multiple-output radar nodes. The measurements for different radar constellations and various target scenes show a self-localization accuracy below $6 \,\mathrm{c}\mathrm{m}$ in range and below $2.5^{\circ }$ for the incident angles. The resulting images of various scenes clearly indicate an information gain compared to single monostatic images due to the combination of bistatic and multiperspective monostatic images.
- 8 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Microwaves
- Vol. 4 (3) , 486-500
Open AccessConstellation Estimation, Coherent Signal Processing, and Multiperspective Imaging in an Uncoupled Bistatic Cooperative Radar Network
Cooperative radar networks are a promising technology in various areas, such as vehicle-to-infrastructure networks for automotive radar and radar remote sensing with UAVs. The use of widely distributed radar networks enables the detection of targets with complex scattering characteristics, as their coherent bistatic images are superior for forward scattering, and each monostatic image illuminates a scene from a different perspective. This work introduces a signal processing scheme that addresses two main challenges in this area: the coherent signal processing of uncoupled radar nodes and the self-localization of the nodes for radar image combination. A comprehensive signal model that incorporates time, frequency and phase incoherency is introduced. Based on this, an algorithm for constellation estimation, synchronization up to the carrier phase level, and multiperspective imaging is developed. The proposed approach is experimentally verified using commercially available $77 \,\mathrm{G}\mathrm{Hz}$ single-input/multiple-output radar nodes. The measurements for different radar constellations and various target scenes show a self-localization accuracy below $6 \,\mathrm{c}\mathrm{m}$ in range and below $2.5^{\circ }$ for the incident angles. The resulting images of various scenes clearly indicate an information gain compared to single monostatic images due to the combination of bistatic and multiperspective monostatic images.
- 8 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave Magazine
- Vol. 25 (6) , 65-71
It’s Tee Time: An Ultrabroadband Componentless Bias Tee: A Planar Ultrabroadband Componentless Bias Tee in Microstrip Line Technology
With the trend toward ever-higher frequencies and continuously increasing bandwidth in communication for 5G and 6G as well as in the radar domain, the demand on broadband hardware components is rising accordingly [1] . Circuits that were initially considered simple have to be optimized further in order to meet challenging demands.
- 8 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave Magazine
- Vol. 25 (6) , 65-71
It’s Tee Time: An Ultrabroadband Componentless Bias Tee: A Planar Ultrabroadband Componentless Bias Tee in Microstrip Line Technology
With the trend toward ever-higher frequencies and continuously increasing bandwidth in communication for 5G and 6G as well as in the radar domain, the demand on broadband hardware components is rising accordingly [1] . Circuits that were initially considered simple have to be optimized further in order to meet challenging demands.
- 8 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave Magazine
- Vol. 24 (6) , 68-75
Self-Interference Leakage Estimation ‘N’ Cancellation Element: Design of an Active Self-Interference Cancellation Coupler
Monostatic radar systems as well as radars with separated but nearby-placed transmit and receive antennas are beneficial in terms of cost-efficiency and miniaturization, which is necessary for their integration into compact radar systems or mobile devices [1] , [2] as well as for radar networks that demand reciprocal transmission channels between the nodes [3] . However, this lack of separation between the transmit (Tx) and receive (Rx) paths due to miniaturization implies only week isolation between Tx and Rx.
- 8 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave Magazine
- Vol. 24 (6) , 68-75
Self-Interference Leakage Estimation ‘N’ Cancellation Element: Design of an Active Self-Interference Cancellation Coupler
Monostatic radar systems as well as radars with separated but nearby-placed transmit and receive antennas are beneficial in terms of cost-efficiency and miniaturization, which is necessary for their integration into compact radar systems or mobile devices [1] , [2] as well as for radar networks that demand reciprocal transmission channels between the nodes [3] . However, this lack of separation between the transmit (Tx) and receive (Rx) paths due to miniaturization implies only week isolation between Tx and Rx.
- Open Access
- 28 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Radio Frequency Identification
- Vol. 6, 467-480
A Cost-Efficient Hybrid UHF RFID and Odometry-Based Mobile Robot Self-Localization Technique With Centimeter Precision
This paper presents an indoor localization approach that determines the absolute position of a mobile robot platform with centimeter precision by fusing RFID localization results based on cost-effective, standard passive UHF RFID technology with the robot’s odometry data. The mobile robot platform is equipped with a multistatic UHF RFID interrogation system, and several RFID tags are arbitrarily placed within the localization environment, serving as landmarks. The RFID localization concept is based on phase evaluations. To overcome the problem of ambiguous position estimations due to the 2π-phase ambiguity of the RFID signal phase and mitigate the linearization problem of the nonlinear system, a novel algorithm based on an iterative multihypothesis Kalman filter is introduced. A realistic simulation setup is developed to validate the proposed filter algorithm. By tracking a UHF RFID-equipped mobile robot platform in a real-world office environment, the proposed approach is also practically tested in terms of real-time capability, everyday suitability, and multipath resistance. Given that centimeter precision is only achieved in environments with weak multipath propagation, the RFID localization results are fused with odometry data provided by the robot. This effectively compensates for offset and drift in the odometry sensor, achieving a root-mean-square localization error of 2.7 cm.
- 28 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Radio Frequency Identification
- Vol. 6, 467-480
Open AccessA Cost-Efficient Hybrid UHF RFID and Odometry-Based Mobile Robot Self-Localization Technique With Centimeter Precision
This paper presents an indoor localization approach that determines the absolute position of a mobile robot platform with centimeter precision by fusing RFID localization results based on cost-effective, standard passive UHF RFID technology with the robot’s odometry data. The mobile robot platform is equipped with a multistatic UHF RFID interrogation system, and several RFID tags are arbitrarily placed within the localization environment, serving as landmarks. The RFID localization concept is based on phase evaluations. To overcome the problem of ambiguous position estimations due to the 2π-phase ambiguity of the RFID signal phase and mitigate the linearization problem of the nonlinear system, a novel algorithm based on an iterative multihypothesis Kalman filter is introduced. A realistic simulation setup is developed to validate the proposed filter algorithm. By tracking a UHF RFID-equipped mobile robot platform in a real-world office environment, the proposed approach is also practically tested in terms of real-time capability, everyday suitability, and multipath resistance. Given that centimeter precision is only achieved in environments with weak multipath propagation, the RFID localization results are fused with odometry data provided by the robot. This effectively compensates for offset and drift in the odometry sensor, achieving a root-mean-square localization error of 2.7 cm.
- Open Access
- 24 September 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 133229-133239
Quasi-Coherent Phase-Based Localization and Tracking of Incoherently Transmitting Radio Beacons
The direct measurement of distance-dependent information between wireless units represents a challenge for wireless locating systems, because it requires the exact time synchronization of separate wireless units. To avoid these synchronization efforts, many wireless locating systems only evaluate phase difference of arrival (PDOA) measurements. While simple PDOA localization techniques rely on multiangulation, advanced PDOA concepts like the holographic extended Kalman filter (HEKF) directly evaluate the measured phases without non-linear preprocessing. However, these differential phase measurement approaches are less sensitive than systems that can measure absolute phase variations, which allow the tracking of much smaller position changes than the signal’s carrier wavelength. This paper proposes to extend the HEKF by the evaluation of absolute phases in an incoherent measurement setup, which consists of a continuous wave (CW) beacon and several receivers. The developed quasi-coherent holographic extended Kalman filter (QCHEKF) uses the overdetermined PDOA measurements to estimate the phase–frequency relation between each beacon–receiver pair. Then, the established phase–frequency relations allow the evaluation of absolute phase measurements and, thus, the accurate localization and tracking of a simple, unsynchronized, narrowband CW beacon, even under severe multipath conditions. This novel concept is experimentally validated via 3D localization results in a challenging indoor scenario using a 24 GHz CW measurement setup. Here, the QCHEKF improves the achieved localization accuracy in comparison to the HEKF by 35 % from 0.78 cm to 0.51 cm, while the maximum deviation from the trajectory reduces by 68 % from 5 cm to 1.6 cm. Furthermore, the QCHEKF enables the exact tracking of fast changes in direction, which is usually a significant challenge for standard wireless target tracking systems.
- 24 September 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 133229-133239
Open AccessQuasi-Coherent Phase-Based Localization and Tracking of Incoherently Transmitting Radio Beacons
The direct measurement of distance-dependent information between wireless units represents a challenge for wireless locating systems, because it requires the exact time synchronization of separate wireless units. To avoid these synchronization efforts, many wireless locating systems only evaluate phase difference of arrival (PDOA) measurements. While simple PDOA localization techniques rely on multiangulation, advanced PDOA concepts like the holographic extended Kalman filter (HEKF) directly evaluate the measured phases without non-linear preprocessing. However, these differential phase measurement approaches are less sensitive than systems that can measure absolute phase variations, which allow the tracking of much smaller position changes than the signal’s carrier wavelength. This paper proposes to extend the HEKF by the evaluation of absolute phases in an incoherent measurement setup, which consists of a continuous wave (CW) beacon and several receivers. The developed quasi-coherent holographic extended Kalman filter (QCHEKF) uses the overdetermined PDOA measurements to estimate the phase–frequency relation between each beacon–receiver pair. Then, the established phase–frequency relations allow the evaluation of absolute phase measurements and, thus, the accurate localization and tracking of a simple, unsynchronized, narrowband CW beacon, even under severe multipath conditions. This novel concept is experimentally validated via 3D localization results in a challenging indoor scenario using a 24 GHz CW measurement setup. Here, the QCHEKF improves the achieved localization accuracy in comparison to the HEKF by 35 % from 0.78 cm to 0.51 cm, while the maximum deviation from the trajectory reduces by 68 % from 5 cm to 1.6 cm. Furthermore, the QCHEKF enables the exact tracking of fast changes in direction, which is usually a significant challenge for standard wireless target tracking systems.