Andre Scheder
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Andre Scheder has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Martin Vossiek
Institute of Microwaves and Photonics, Friedrich-Alexander-Universitt Erlangen-Nrnberg, Erlangen, Germany
6 shared publications Anna Bridier
Rohde & Schwarz GmbH & Co. KG, Mnchen, Germany
2 shared publications- Tim Pfahler
Institute of Microwaves and Photonics, Friedrich-Alexander-Universitt Erlangen-Nrnberg, Erlangen, Germany
2 shared publications - Tobias Koegel
Institute of Microwaves and Photonics, Friedrich-Alexander-Universitt Erlangen-Nrnberg, Erlangen, Germany
2 shared publications - Christian Carlowitz
Institute of Microwaves and Photonics (LHFT), Friedrich-Alexander-Universitt Erlangen-Nrnberg (FAU), Erlangen, Germany
1 shared publication - Jan Schür
Institute of Microwaves and Photonics (LHFT), Friedrich-Alexander-Universitt Erlangen-Nrnberg (FAU), Erlangen, Germany
1 shared publication
Latest Publications
- Open Access
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of the Communications Society
- Vol. 7, 13085-13100
Two-User Near-Field IRS-Assisted Communication: Codebook Design and Multiple Access
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of the Communications Society
- Vol. 7, 13085-13100
Open AccessTwo-User Near-Field IRS-Assisted Communication: Codebook Design and Multiple Access
- 9 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave Magazine
- Vol. 26 (6) , 119-126
It’s a Match
Antenna impedance tuners are crucial components in modern wireless communication systems, designed to enhance antenna performance and efficiency across a broad frequency range. These devices adjust an antenna’s impedance to align with changing signal environment conditions, thereby maximizing power transfer and minimizing signal reflection. This article explores the design of ultra-low power consumption solid-state impedance tuners specifically for high RF power applications, aligned with the specifications of the Student Design Competition at the International Microwave Symposium 2024 in Washington, DC. The paper delves into the design, simulation, and evaluation processes of an impedance tuner. Additionally, an algorithm is introduced that optimizes tuner states to achieve a high figure of merit for the competition. A high-power test was also conducted to assess the harmonics generated by the tuner and to evaluate its maximum power handling capability.
- 9 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave Magazine
- Vol. 26 (6) , 119-126
It’s a Match
Antenna impedance tuners are crucial components in modern wireless communication systems, designed to enhance antenna performance and efficiency across a broad frequency range. These devices adjust an antenna’s impedance to align with changing signal environment conditions, thereby maximizing power transfer and minimizing signal reflection. This article explores the design of ultra-low power consumption solid-state impedance tuners specifically for high RF power applications, aligned with the specifications of the Student Design Competition at the International Microwave Symposium 2024 in Washington, DC. The paper delves into the design, simulation, and evaluation processes of an impedance tuner. Additionally, an algorithm is introduced that optimizes tuner states to achieve a high figure of merit for the competition. A high-power test was also conducted to assess the harmonics generated by the tuner and to evaluate its maximum power handling capability.
- Open Access
- 13 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Microwaves
- Vol. 4 (3) , 404-415
A Foil Flip-Chip Interconnect With an Ultra-Broadband Bandwidth of 130 GHz and Beyond for Heterogeneous High-End System Designs
This paper presents an ultra-broadband, low-loss, flexible liquid crystal polymer substrate-to-substrate interconnect with a bandwidth of more than 130 GHz. The transition discontinuity was minimized by maintaining both the reference impedance and the electromagnetic field conformity across the transition from alumina substrate to flip-chip foil. Therefore, more than 600 $\mu$ m long flexible flip-chip interconnects can be realized for bridging millimeter-wave sub-modules and enabling ultra-broadband heterogeneous system design with a measured return loss of above 20 dB. Furthermore, the interconnect can realize ramp interconnections between monolithic microwave integrated circuits or substrates with different substrate heights due to the flexible foil substrate. Minimum parasitic radiation at the transition is realized through a closely spaced signal-to-ground connection. Furthermore, the robustness of the proposed interconnect against lateral misalignment in the assembly is presented through simulation and measurement. An outstanding insertion loss of less than 0.3 dB per transition over a bandwidth of more than 130 GHz is shown.
- 13 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Microwaves
- Vol. 4 (3) , 404-415
Open AccessA Foil Flip-Chip Interconnect With an Ultra-Broadband Bandwidth of 130 GHz and Beyond for Heterogeneous High-End System Designs
This paper presents an ultra-broadband, low-loss, flexible liquid crystal polymer substrate-to-substrate interconnect with a bandwidth of more than 130 GHz. The transition discontinuity was minimized by maintaining both the reference impedance and the electromagnetic field conformity across the transition from alumina substrate to flip-chip foil. Therefore, more than 600 $\mu$ m long flexible flip-chip interconnects can be realized for bridging millimeter-wave sub-modules and enabling ultra-broadband heterogeneous system design with a measured return loss of above 20 dB. Furthermore, the interconnect can realize ramp interconnections between monolithic microwave integrated circuits or substrates with different substrate heights due to the flexible foil substrate. Minimum parasitic radiation at the transition is realized through a closely spaced signal-to-ground connection. Furthermore, the robustness of the proposed interconnect against lateral misalignment in the assembly is presented through simulation and measurement. An outstanding insertion loss of less than 0.3 dB per transition over a bandwidth of more than 130 GHz is shown.
- 8 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave Magazine
- Vol. 25 (6) , 65-71
It’s Tee Time: An Ultrabroadband Componentless Bias Tee: A Planar Ultrabroadband Componentless Bias Tee in Microstrip Line Technology
With the trend toward ever-higher frequencies and continuously increasing bandwidth in communication for 5G and 6G as well as in the radar domain, the demand on broadband hardware components is rising accordingly [1] . Circuits that were initially considered simple have to be optimized further in order to meet challenging demands.
- 8 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave Magazine
- Vol. 25 (6) , 65-71
It’s Tee Time: An Ultrabroadband Componentless Bias Tee: A Planar Ultrabroadband Componentless Bias Tee in Microstrip Line Technology
With the trend toward ever-higher frequencies and continuously increasing bandwidth in communication for 5G and 6G as well as in the radar domain, the demand on broadband hardware components is rising accordingly [1] . Circuits that were initially considered simple have to be optimized further in order to meet challenging demands.
- 26 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 72 (1) , 505-515
A Low-Loss Bond-Wire Interconnect Design With More Than 130 GHz Bandwidth Enabling an Ultra-Broadband Heterogeneous System Design
This article presents a low-loss, ultra-broadband, impedance-controlled bond-wire interconnect interface enabling heterogeneous system design with more than 130 GHz bandwidth. The article focuses on the bond-wire interface design, the substrate arrangement, and the bond-loop specification. Moreover, a robustness analysis of the interconnect regarding assembly tolerances is given. Furthermore, an analysis of parasitic radiation at the interconnect discontinuities is carried out. To account for the dielectric properties of the substrate, the alumina of the demonstrator circuit was precisely characterized. The proposed bond-wire interconnect has been verified up to 135 GHz with a de-embedded insertion loss (IL) of less than of 0.6 dB. A measured return loss (RL) of more than 25 dB over a bandwidth of 130 GHz demonstrates a mmW transparent interconnect, setting a new benchmark for bond-wire interconnect design. In addition, the bond-wire interface is easy to assemble, is insensitive to manufacturing tolerances and thermal expansion, and has a minimal space requirement, thereby providing a cost-effective alternative to flip-chip assemblies.
- 26 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 72 (1) , 505-515
A Low-Loss Bond-Wire Interconnect Design With More Than 130 GHz Bandwidth Enabling an Ultra-Broadband Heterogeneous System Design
This article presents a low-loss, ultra-broadband, impedance-controlled bond-wire interconnect interface enabling heterogeneous system design with more than 130 GHz bandwidth. The article focuses on the bond-wire interface design, the substrate arrangement, and the bond-loop specification. Moreover, a robustness analysis of the interconnect regarding assembly tolerances is given. Furthermore, an analysis of parasitic radiation at the interconnect discontinuities is carried out. To account for the dielectric properties of the substrate, the alumina of the demonstrator circuit was precisely characterized. The proposed bond-wire interconnect has been verified up to 135 GHz with a de-embedded insertion loss (IL) of less than of 0.6 dB. A measured return loss (RL) of more than 25 dB over a bandwidth of 130 GHz demonstrates a mmW transparent interconnect, setting a new benchmark for bond-wire interconnect design. In addition, the bond-wire interface is easy to assemble, is insensitive to manufacturing tolerances and thermal expansion, and has a minimal space requirement, thereby providing a cost-effective alternative to flip-chip assemblies.
- 8 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave Magazine
- Vol. 24 (6) , 68-75
Self-Interference Leakage Estimation ‘N’ Cancellation Element: Design of an Active Self-Interference Cancellation Coupler
Monostatic radar systems as well as radars with separated but nearby-placed transmit and receive antennas are beneficial in terms of cost-efficiency and miniaturization, which is necessary for their integration into compact radar systems or mobile devices [1] , [2] as well as for radar networks that demand reciprocal transmission channels between the nodes [3] . However, this lack of separation between the transmit (Tx) and receive (Rx) paths due to miniaturization implies only week isolation between Tx and Rx.
- 8 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave Magazine
- Vol. 24 (6) , 68-75
Self-Interference Leakage Estimation ‘N’ Cancellation Element: Design of an Active Self-Interference Cancellation Coupler
Monostatic radar systems as well as radars with separated but nearby-placed transmit and receive antennas are beneficial in terms of cost-efficiency and miniaturization, which is necessary for their integration into compact radar systems or mobile devices [1] , [2] as well as for radar networks that demand reciprocal transmission channels between the nodes [3] . However, this lack of separation between the transmit (Tx) and receive (Rx) paths due to miniaturization implies only week isolation between Tx and Rx.