NINicoleta Daniela Ignat

Nicoleta Daniela Ignat

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Nicoleta Daniela Ignat has a total of 27 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Green Hydrogen European Perspectives. Insights from Bibliometric Analysis

    by Ionuț Marius Croitoru, Nicoleta Daniela Ignat, Răzvan Mihai Dobrescu, Cristina Elena Bigioi

    Hydrogen is currently mainly obtained from fossil resources, and the associated CO 2 emissions in the current production process are very high (10-20 kg CO 2 /kg H 2 ). Given its importance as an energy source and for storing excess electricity, new methods for producing hydrogen with low carbon emissions are being explored. The most widespread approach is the electrolysis of water using renewable energy sources. In recent years, numerous bibliometric studies have focused on hydrogen. The present study aims to analyse the scientific community’s perspective on new technologies for hydrogen production with minimal environmental impact, using a systematic bibliometric approach. European trends on green hydrogen were examined for the period 2020-2024, using Web of Science database, the main tag “Green hydrogen production” and secondary tags such as “European Green Deal”, “leveled cost of hydrogen” and “clean hydrogen”. The exported data was processed using bibliometric analysis tools to identify key terms, cluster formation, and interconnections between concepts. The correlation analysis highlights several key findings: • The essential contribution of hydrogen in achieving a sustainable and decarbonized energy future. • The development of efficient, scalable and sustainable systems depends on innovative green hydrogen production processes. • The interconnection of biomass with other terms in Cluster 4 emphasizes its central role in promoting renewable energy technologies. This study contributes to the current literature by providing a comprehensive analysis of research trends and scientific perspectives on green hydrogen production, supporting future advances in this field.


  • Open Access

    Exploring Financial Literacy in Higher Education with the Help of FinTech: A Bibliometric Analysis of Linkages to Access, Behavior, and Well-Being Through Digital Innovation

    by Ionut Marius Croitoru, Paula-Paraschiva Dragan (Spiridon), Nicoleta Daniela Ignat, Romanita Jumanca

    This study explores the dynamic interaction between financial literacy and higher education, focusing on the critical role of financial education in improving individual financial well-being. Using bibliometric analysis and the VOSviewer software, this research examines thematic clusters in financial literacy, categorized into access, behavior, health, and education. By analyzing 469 articles from the Web of Science database (2020–2024), this study identifies trends and key linkages between financial literacy and societal well-being, highlighting the role of digital innovation. While FinTech is discussed as a facilitator of financial inclusion and education, the primary focus lies in understanding how financial literacy drives behavioral change, capacity building, and economic resilience. This paper provides information for policymakers and educators to design inclusive, behaviorally focused educational programs that address specific demographic needs, ultimately contributing to societal and economic resilience.


  • Open Access

    Catalytic Pyrolysis of Low-Density Polyethylene Waste

    by Ioan Calinescu, Grigore Psenovschi, Mihaela Cojocaru, Ciprian Gabriel Chisega-Negrila, Carmen Albulescu, Mihai Brebu, Adrian Trifan, Nicoleta Daniela Ignat, Petre Chipurici

    Plastics, once regarded as a revolutionary material shaping modern society, now pose an unprecedented threat to our environment. Household solid waste sorting stations produce several fractions, one of which contains a high concentration of Low-Density Polyethylene (LDPE) film waste (packaging, sunscreen film, etc.). This fraction is difficult to recycle because it contains quite a lot of impurities. Usually, it is sent to cement factories that burn it together with other fuels. However, with some processing techniques such as catalytic pyrolysis, this fraction could be valorized. In this paper, experiments were carried out in batches at a laboratory-scale installation, with a processing capacity of 1–3 kg of waste. A pyrolysis reactor was connected to a distillation column, enabling separation of the fractions. The gaseous and liquid fractions were characterized by GC-FID-TCD (gases) and GC-MS (liquids) analysis. Natural catalysts such as bentonite or clinoptilolite were studied and used in the melting of plastic mass to simplify the process as much as possible. To test the activity of the catalysts, the pyrolysis of LDPE granules was initially studied. It was found that natural zeolites are much more active than bentonite and that a minimum concentration of 5–10% is needed to have a positive effect on the composition of the fractions (increasing the weight of the light fractions (C1–C6, C6–C10, and C11–C13) in relation to the heavy fractions (C13–C20 and C20+). Catalytic pyrolysis gives a completely different distribution of light hydrocarbons. The best catalyst selected from LDPE lab experiments was then tested upon the pyrolysis of plastic film waste obtained by a waste treatment plant. The research objective reported in this paper was to obtain a fraction of combustible gases in the largest possible proportion, which can be much more easily exploited by burning in an engine that drives an electric generator.


  • Open Access

    Catalytic Pyrolysis of Low-Density Polyethylene Waste

    by Ioan Calinescu, Grigore Psenovschi, Mihaela Cojocaru, Ciprian Gabriel Chisega-Negrila, Carmen Albulescu, Mihai Adrian Brebu, Adrian Trifan, Nicoleta Daniela Ignat, Petre Chipurici

    Plastics, once regarded as a revolutionary material shaping modern society, now poses an unprecedented threat to our environment. Household solid waste sorting stations produce several fractions, one of which contains a high concentration of Low-Density Polyethylene (LDPE) film waste (packaging, sunscreen film, etc.). This fraction is difficult to recycle because it contains quite a lot of impurities. Usually, it is sent to the cement factories that burn it together with other fuels. However, with some processing techniques such catalytic pyrolysis this fraction could be valorized. In this paper the experiments which were carried out at a laboratory scale installation, in batches with a processing capacity of 1-3 kg of waste. The pyrolysis reactor is connected to a distillation column giving the possibility to separate the fractions. The gaseous and liquid fractions were characterized by GC-FID-TCD (gases) and GC-MS (liquids) analysis. Natural catalysts such as bentonite or clinoptilolite were studied and used in the melting of plastic mass to simplify the process as much as possible. To test the activity of the catalysts, the pyrolysis of LDPE granules was initially studied. It was found that natural zeolites are much more active than bentonite and that a minimum concentration of 5-10% is needed to have a positive effect on the composition of the fractions (increasing the weight of the light fractions C1-C6, C6-C10 and C11-C13) in relation to the heavy fractions C13-C20 and C20+. Catalytic pyrolysis gives a completely different distribution of light hydrocarbons. The best catalyst selected from LDPE lab experiments, was then tested upon the pyrolysis of plastic film waste obtained by a waste treatment plant. The research objective reported in this paper was to obtain a fraction of combustible gases in the largest possible proportion, which can be much easier exploited by burning in an engine that drives an electric generator.


  • Open Access

    Loop-Ultrasound-Assisted Extraction: An Efficient Approach for the Recovery of Bioactive Compounds from Oak Bark

    by Ilaria Quaratesi, Ioan Calinescu, Vasile Lavric, Vittoria Ferrara, Elena Badea, Petre Chipurici, Elisa-Gabriela Dumbravă, Rodica-Roxana Constantinescu, Nicoleta Daniela Ignat, Ioana Popa

    Oak bark is a by-product known for its richness in polyphenols, with tanning substances being particularly interesting for their application in different fields. Vegetable tannins are mostly utilized in the leather sector, but are also widely used as adhesives, in cement plasticizers and for medical and agrochemical applications owing to their natural antimicrobial activity. This study aimed to develop a green and efficient pilot-scale technique for extracting polyphenols from oak bark by ultrasound-assisted extraction (UAE) using a modified Dual-Frequency Reactor (DFR). Different parameters, such as extraction time, temperature, and solvent type (water, sodium hydroxide or sodium sulfite and bisulfite solutions) were investigated for their influence on the total phenolic content (TPC) and the quantity of dry extract. Control experiments by conventional methods were also performed. UAE at 50 °C yielded the highest TPC and dry extract (confirmed by ANOVA analysis, p < 0.05) in just 10 min, suggesting that UAE can be considered an energy- and cost-effective alternative to conventional techniques. The most suitable solvent was found to be a 0.5% sodium hydroxide solution. The molecular profile of the extracts was assessed by FTIR-ATR spectroscopy, revealing typical signals of tannins in all extracts. Furthermore, antimicrobial activity tests demonstrated the complete absence of Gram-positive and Gram-negative bacteria in the extracts, ensuring the suitability of the product for different kinds of application.


  • Open Access

    Quality Study on Vehicle Heat Ventilation and Air Conditioning Failure

    by Dina Diga, Irina Severin, Nicoleta Daniela Ignat

    The automotive industry has set a highly demanding standard to meet customer satisfaction. The paper aimed to detail how quality analysis has been conducted to state the main causes that generated nonconformities of heat, ventilation and air conditioning (HVAC) systems. Problems have been reported on HVAC systems, such as noise, not being cold enough and moldy smell issues. All three problems determined by customer reports initiated the first contribution of this paper, namely by an initial quality study, and generated the investigation using is/is not problem scoping, data analysis, and graphical analysis. Pareto analysis and the Plan, Do, Check and Act (PDCA) approach are used to highlight the traceability of the actions performed in the evaluation of the problems and the detection of the causes related to each problem. The data analysis process and the data obtained from the analysis are the core of this paper. An immediate action plan is proposed, concluding with the hypothesis that the root cause is the blockage of the heater. This methodology has significant potential for being implemented, even for other components in the same industry or different sectors.


  • Open Access

    Framework on Performance Management in Automotive Industry: A Case Study

    by Elena Lascu, Irina Severin, Florina Daniela Lascu, Razvan Adrian Gudana, Gabriela Nalbitoru, Nicoleta Daniela Ignat

    The purpose of this research is to identify the risks and deficiencies that affect the performance of companies that provide vehicle after-sales services. Thus, this paper highlights the results of a comparative study based on a questionnaire conducted at the level of six brands in the automotive industry. A model was developed to investigate the factors that affect the global performance of the after-sales sector and the authenticity of the information related to the issue studied. Moreover, based on the collected data, this study evaluates the strategies related to performance management used by the organizations studied. In the end, even if the results showed a score of 81% on the questionnaire, we found that companies that provide vehicle after-sales services have not implemented and do not maintain totally the strategies related to performance management. Consequently, the need for change can be emphasized. Based on the analyzed data in the second part of the paper, we identified deficiencies and risks in terms of the organization, operation and management of the service units. These results confirm that the vehicle repair service has a significant influence on employee and customer satisfaction, on the quality of the vehicles repaired and the repair completion time.