Constantin Eugen Ailenei
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Constantin Eugen Ailenei has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Carmen Loghin
Faculty of Industrial Design and Business Management, “Gheorghe Asachi” Technical University of Iasi, 29 Prof. Dimitrie Mangeron Blvd., 700050 Iasi, Romania
2 shared publications - Dorina Nicolina Isopescu
Faculty of Civil Engineering and Building Services, Gheorghe Asachi Technical University of Iasi, 700050 Iași, Romania
2 shared publications - Savin Dorin Ionesi
“Gheorghe Asachi” Technical University of Iasi, Faculty of Industrial Design and Business Management, 29 D. Mangeron, 70050, Iasi, Romania
2 shared publications - Sebastian George Maxineasa
“Gheorghe Asachi” Technical University of Iasi
2 shared publications - Adriana Mariana Asoltanei
Department of Chemical Engineering, Faculty of Chemical Engineering and Environmental Protection “Cristofor Simionescu”, “Gheorghe Asachi” Technical University of Iasi, 700050 Iasi, Romania
1 shared publication - Alexandra Bodoga
Faculty of Industrial Design and Business Management, “Gheorghe Asachi” Technical University of Iasi, 29 Prof. Dimitrie Mangeron Blvd., 700050 Iasi, Romania
1 shared publication
Latest Publications
- Open Access
- 25 June 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (13) , 6468
Hygrothermal Performance and Sustainability of Wool or/and Expanded Polystyrene (EPS) Insulation
This study critically addresses the challenge of selecting optimal insulation materials for contemporary, energy-efficient building envelopes, a decision with profound environmental, structural, and occupational health consequences. The paper responds to the growing demand for sustainable, resilient solutions by comparing wool, a bio-based, regenerative material, and expanded polystyrene (EPS), a synthetic polymer widely implemented in the construction industry, and advanced laboratory testing (thermal conductivity, moisture buffering, freeze–thaw resistance) is discussed in a comprehensive synthesis of the recent literature. Also, field evaluations from European retrofits and pilot projects (UK, Denmark, Finland, Iceland, Norway, Sweden, Germany and France) further contextualize performance outcomes, and life cycle impacts are considered. Recent results reveal that wool insulation achieves a moisture buffering value (MBV) between 1.8 and 2.7 (g/m2) % RH, minimal vapor resistance (mvr = 1–2), and preserves functional and structural integrity through more than 100 freeze–thaw cycles, leading to significant stabilization of the interior microclimate and enhanced durability. In contrast, EPS delivers lower thermal conductivity (0.032–0.037 (W/mK), critical for reducing heating/cooling demand, but exhibits limited vapor permeability (lvp = 60–150 MN·s/(g·m)), increased risk of condensation and mold, and reduced compressive strength (<22% after 30 cycles), especially when ventilation details are inadequate. Hybrid envelope systems leveraging both EPS and wool are demonstrated to optimize energy efficiency (up to 23% seasonal savings) and reduce interior humidity fluctuations, while lifecycle and recycling assessments show wool panels to be markedly superior in carbon footprint reduction and circularity. The stratification of insulation layers incorporating wool for vapor and moisture control, and EPS for pure thermal resistance is emerging as best practice in sustainable retrofit and new-build projects. Recommendations highlight the necessity for rigorous laboratory validation, international standards alignment, and integrated material design for robust hygrothermal comfort and environmental performance. The review also covers wool- and EPS-based hybrid composites, showing how natural fibers can improve key mechanical properties without compromising thermal insulation performance or environmental benefits.
- 25 June 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (13) , 6468
Open AccessHygrothermal Performance and Sustainability of Wool or/and Expanded Polystyrene (EPS) Insulation
This study critically addresses the challenge of selecting optimal insulation materials for contemporary, energy-efficient building envelopes, a decision with profound environmental, structural, and occupational health consequences. The paper responds to the growing demand for sustainable, resilient solutions by comparing wool, a bio-based, regenerative material, and expanded polystyrene (EPS), a synthetic polymer widely implemented in the construction industry, and advanced laboratory testing (thermal conductivity, moisture buffering, freeze–thaw resistance) is discussed in a comprehensive synthesis of the recent literature. Also, field evaluations from European retrofits and pilot projects (UK, Denmark, Finland, Iceland, Norway, Sweden, Germany and France) further contextualize performance outcomes, and life cycle impacts are considered. Recent results reveal that wool insulation achieves a moisture buffering value (MBV) between 1.8 and 2.7 (g/m2) % RH, minimal vapor resistance (mvr = 1–2), and preserves functional and structural integrity through more than 100 freeze–thaw cycles, leading to significant stabilization of the interior microclimate and enhanced durability. In contrast, EPS delivers lower thermal conductivity (0.032–0.037 (W/mK), critical for reducing heating/cooling demand, but exhibits limited vapor permeability (lvp = 60–150 MN·s/(g·m)), increased risk of condensation and mold, and reduced compressive strength (<22% after 30 cycles), especially when ventilation details are inadequate. Hybrid envelope systems leveraging both EPS and wool are demonstrated to optimize energy efficiency (up to 23% seasonal savings) and reduce interior humidity fluctuations, while lifecycle and recycling assessments show wool panels to be markedly superior in carbon footprint reduction and circularity. The stratification of insulation layers incorporating wool for vapor and moisture control, and EPS for pure thermal resistance is emerging as best practice in sustainable retrofit and new-build projects. Recommendations highlight the necessity for rigorous laboratory validation, international standards alignment, and integrated material design for robust hygrothermal comfort and environmental performance. The review also covers wool- and EPS-based hybrid composites, showing how natural fibers can improve key mechanical properties without compromising thermal insulation performance or environmental benefits.
- Open Access
A Fully 3D-Printable Pull-Off Fixture for Adhesion Testing of FDM Prints on Textile Substrates
Adhesion between fused deposition modelling (FDM) printed polymers and textile substrates is critical for durable printed-on-textile hybrids. Since no dedicated test standard exists for additively manufactured textile interfaces, many studies use T-peel methods adapted from adhesive-bond standards. However, printed-on-textile joints are often governed by polymer penetration into the fabric and mechanical interlocking, rather than by a discrete adhesive layer. This work evaluates a fixture-based perpendicular (normal-separation) tensile method, using a circular dolly printed directly onto a cotton plain-weave substrate and a fully 3D-printable, threaded, self-aligning clamping assembly. Three representative filaments, namely polyethylene terephthalate glycol-modified (PETG), polylactic acid (PLA), and thermoplastic polyurethane (TPU), were tested using both the proposed pull-off method and an ISO 11339-type T-peel benchmark, with n = 8 specimens per polymer. The perpendicular method produced complete datasets for all polymers and clearly differentiated adhesion performance (TPU > PLA > PETG). In contrast, for T-peel, the standard evaluation window (25–125 mm) was completed for all PETG specimens but only for a subset of PLA specimens and a single TPU specimen. In the remaining tests, premature substrate failure prevented completion of this window, so the results could not be evaluated. Microscopy confirmed distinct interlocking morphologies across polymers, supporting the observed differences in failure behavior between peel and normal separation. Overall, the results indicate that perpendicular dolly pull-off testing is a practical and reproducible alternative for quantifying adhesion across a wider range of printed-on-textile bonding conditions.
Open AccessA Fully 3D-Printable Pull-Off Fixture for Adhesion Testing of FDM Prints on Textile Substrates
Adhesion between fused deposition modelling (FDM) printed polymers and textile substrates is critical for durable printed-on-textile hybrids. Since no dedicated test standard exists for additively manufactured textile interfaces, many studies use T-peel methods adapted from adhesive-bond standards. However, printed-on-textile joints are often governed by polymer penetration into the fabric and mechanical interlocking, rather than by a discrete adhesive layer. This work evaluates a fixture-based perpendicular (normal-separation) tensile method, using a circular dolly printed directly onto a cotton plain-weave substrate and a fully 3D-printable, threaded, self-aligning clamping assembly. Three representative filaments, namely polyethylene terephthalate glycol-modified (PETG), polylactic acid (PLA), and thermoplastic polyurethane (TPU), were tested using both the proposed pull-off method and an ISO 11339-type T-peel benchmark, with n = 8 specimens per polymer. The perpendicular method produced complete datasets for all polymers and clearly differentiated adhesion performance (TPU > PLA > PETG). In contrast, for T-peel, the standard evaluation window (25–125 mm) was completed for all PETG specimens but only for a subset of PLA specimens and a single TPU specimen. In the remaining tests, premature substrate failure prevented completion of this window, so the results could not be evaluated. Microscopy confirmed distinct interlocking morphologies across polymers, supporting the observed differences in failure behavior between peel and normal separation. Overall, the results indicate that perpendicular dolly pull-off testing is a practical and reproducible alternative for quantifying adhesion across a wider range of printed-on-textile bonding conditions.
- Open Access
- 17 November 2023
- Published by MDPI AG in Sustainability
- Vol. 15 (22) , 16068
Ozone–Vacuum-Based Decontamination: Balancing Environmental Responsibility and Textile Waste
This study explores the use of ozone decontamination as a sustainable approach for eradicating pathogens from various environments. Ozone, a highly reactive gas, demonstrates remarkable efficacy in eliminating bacteria, viruses, and fungi. Decontamination of textile materials using an innovative ozone treatment method conducted under vacuum conditions has been investigated. A hybrid apparatus comprising a vacuum and an ozone generator was employed for the decontamination process. Ozone decontamination offers environmental benefits by avoiding harmful by-products and minimising long-term environmental exposure. However, challenges include the need for proper equipment and training to ensure safety and effectiveness. This research underscores the promise of ozone decontamination as a powerful and eco-friendly method for pathogen eradication in textile materials with future developments in diverse settings.
- 17 November 2023
- Published by MDPI AG in Sustainability
- Vol. 15 (22) , 16068
Open AccessOzone–Vacuum-Based Decontamination: Balancing Environmental Responsibility and Textile Waste
This study explores the use of ozone decontamination as a sustainable approach for eradicating pathogens from various environments. Ozone, a highly reactive gas, demonstrates remarkable efficacy in eliminating bacteria, viruses, and fungi. Decontamination of textile materials using an innovative ozone treatment method conducted under vacuum conditions has been investigated. A hybrid apparatus comprising a vacuum and an ozone generator was employed for the decontamination process. Ozone decontamination offers environmental benefits by avoiding harmful by-products and minimising long-term environmental exposure. However, challenges include the need for proper equipment and training to ensure safety and effectiveness. This research underscores the promise of ozone decontamination as a powerful and eco-friendly method for pathogen eradication in textile materials with future developments in diverse settings.
- Open Access
New Waste-Based Composite Material for Construction Applications
The global demand for fiber-based products is continuously increasing. The increased consumption and fast fashion current in the global clothing market generate a significant quantity of pre-and post-production waste that ends up in landfills and incinerators. The present study aims to obtain a new waste-based composite material panel for construction applications with improved mechanical properties that can replace traditional wood-based oriented strand boards (OSB). The new composite material is formed by using textile wastes as a reinforcement structure and a combination of bi-oriented polypropylene films (BOPP) waste, polypropylene non-woven materials (TNT) waste and virgin polypropylene fibers (PP) as a matrix. The mechanical properties of waste-based composite materials are modeled using the Taguchi method based on orthogonal arrays to maximize the composite characteristics’ mechanical properties. Experimental data validated the theoretical results obtained.
Open AccessNew Waste-Based Composite Material for Construction Applications
The global demand for fiber-based products is continuously increasing. The increased consumption and fast fashion current in the global clothing market generate a significant quantity of pre-and post-production waste that ends up in landfills and incinerators. The present study aims to obtain a new waste-based composite material panel for construction applications with improved mechanical properties that can replace traditional wood-based oriented strand boards (OSB). The new composite material is formed by using textile wastes as a reinforcement structure and a combination of bi-oriented polypropylene films (BOPP) waste, polypropylene non-woven materials (TNT) waste and virgin polypropylene fibers (PP) as a matrix. The mechanical properties of waste-based composite materials are modeled using the Taguchi method based on orthogonal arrays to maximize the composite characteristics’ mechanical properties. Experimental data validated the theoretical results obtained.