ITIrina Dmitrievna Troshkina

Irina Dmitrievna Troshkina

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Irina Dmitrievna Troshkina has a total of 37 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Recovery of a rare earth element concentrate during nitric acid processing of phosphate feedstock

    by A. V. Shilyaev, I. D. Troshkina, E. V. Chudinovskih

    This study investigated the recovery of a rare earth element (REE) concentrate from a process liquor generated by dissolving apatite concentrate in nitric acid during phosphate fertilizer production. The concentrate was recovered from the nitrophosphoric acid liquor by precipitation with aqueous ammonia. As the precipitation pH increased from 0.5 to 1.8, the residual REE concentration in the liquor decreased from 0.09 to 0.01 %. The REE content of the concentrate exceeded 30 % at pH 0.8–1.5. Below pH 1.5, the calcium and fluorine contents of the concentrate increased, which was attributed to the lower solubility of monocalcium phosphate and calcium fluoride. The optimum pH range was 0.8–1.5, in which 70–90 % of the REEs precipitated and the REE content of the concentrate exceeded 30 %. At pH 1.0, increasing the neutralization temperature from 60 to 80 °C raised REE recovery by precipitation from 66 to 71 %. The distribution of individual REEs in the precipitate showed no appreciable change over the precipitation pH range of 0.8–1.5. The predominant REEs in the concentrate were cerium (~50 %), neodymium (~15 %), lanthanum (~15 %), and praseodymium (~10 %).

  • Calcium nitrate anhydrous and ammonium sulfate crystalline obtaining from phosphate fertilizers wastes

    by A. V. Shilyaev, I. D. Troshkina

    Extractive phosphoric acid and phosphoric mineral fertilizers processing forms wastes, phosphogypsum is the main. Phosphogypsum is not widely used due to its low radioactivity. Most of it is accumulated in dumps for long-term storage. Phosphogypsum can be considered as a potential source of calcium, sulfur, phosphorus and rare earths (REs) of the cerium group. The aim of the work is to develop a technology for obtaining calcium nitrate Ca(NO3)2 anhydrous, ammonium sulfate (NH4)2SO4 crystalline and REs’ concentrate from phosphogypsum. We develop a basic process flow diagram that allows separating REs’ concentrate from calcium and sulfur compounds. (NH4)2SO4 is a product of the reaction between phosphogypsum and an excess of ammonium carbonate solution. The resulting phosphochalk is separated from the (NH4)2SO4 solution by filtration. The (NH4)2SO4 solution is neutralized with sulfuric acid to pH 4–6, evaporated, and (NH4)2SO4 crystallized. Phosphochalk is dissolved in excess nitric acid. The resulting acidic Ca(NO3)2 solution is cooled to -10 °C to separate the Ca(NO3)2·4H2O crystals. After the above separating the REs’ concentrate is precipitated with ammonia. After washing with nitric acid at -10 °C, the crystals are dissolved and neutralized with CaCO3 to pH 4. The resulting chalk pulp is filtered, separating Ca(NO3)2 solution from insoluble impurities of calcium phosphate and fluoride. The purified Ca(NO3)2 solution is evaporated and granulated to obtain Ca(NO3)2 anhydrous.

  • CHARACTERISTICS OF FLUOROPOLYMER-CONTAINING COMPOSITE DURING THE SORPTION OF RHENIUM FROM NITRIC ACID MEDIA

    by Alisa V. Bardysh, Anna Y. Maleva, Irina D. Troshkina

    Sorption of rhenium by a carbon composite from a model sulfuric acid solution was studied under batch conditions. The influence of the nitrate-ion on rhenium sorption was preliminarily assessed, revealing a decrease in the capacity of the carbon composite with an increase in its concentration. It was found that the maximum capacity of the carbon composite is observed when sorbing from solutions with an acidity corresponding to a pH of 3. The sorption isotherm of rhenium by the carbon composite is described by Henry's equation with a constant K equal to (3070 ± 50) cm³/g. Using the limited volume method at various temperatures, integral kinetic curves of sorption were obtained. The effective diffusivity coefficient of rhenium in the carbon composite was found to be 1.16·10⁻⁹ m²/s. The data confirm the high accuracy of the pseudo-second-order model in describing the kinetics of the sorption rhenium by the carbon composite.

  • SORPTION RECOVERY OF TANTALUM FROM SULFATE-FLUORIDE LEACHING SOLUTIONS OF RHENIUM-NICKEL SUPERALLOY WASTE

    by Maksim A. Solodovnikov, Irina D. Troshkina

    This study investigates a sorption-based technology for recovering tantalum from sulfate-fluoride leaching solutions generated during the processing of tantalum-tungsten intermediate product derived from rhenium-nickel superalloy ZhS32 VI waste. The research aimed to develop an efficient method for reclaiming valuable tantalum from complex secondary raw materials. The methodology involved a comparative analysis of the efficiency of strongly basic anion exchange resins (Lewatit K6367, Axionit VPA G2.4, Purolite A600) under the following conditions: initial Ta concentration 4037 mg/L, 1 M H2SO4, 1 M HF, and solid-to-liquid ratio S:L — 1:50. It was found that the maximum tantalum recovery (85.3 %) was achieved using Lewatit K6367. Kinetic studies revealed different rate-determining steps: internal diffusion for the gel-type resin Axionit VPA G2.4 (k 8.99 g·mg-1·min-0.5), and chemical exchange reaction for the macroporous resins Purolite A600 and Lewatit K6367 (k 10.2·10-3 min-1 and 15.1·10-1 min-1, respectively). Desorption using an ammonium fluoride solution (100 g/L) recovered 85 % of the sorbed tantalum.

  • Open Access

    Recovery of Tantalum from a Semi-Product of the Comprehensive Processing of Waste from a Rhenium-Containing Nickel-Based Superalloy

    by Maksim Alexandrovich Solodovnikov, Irina Dmitrievna Troshkina

    Introduction: To address pressing resource and environmental challenges, this study investigates the tantalum recovery from a Ta-W semi-product generated during the processing of grinding waste from the ZhS32 VI rhenium-nickel superalloy. Methods: The Ta-W semi-product was sintered with NaOH (700–1000 °C) to oxidize TaC into insoluble sodium tantalates (NaTaO 3 /Na 5 TaO 5 ), with an optimal ratio (semi-product: NaOH) and temperature determined. The sintered residue underwent acid leaching (HF/H 2 SO 4 mixture, room temperature), where leaching parameters (time, phase ratio) were optimized; the kinetics was studied, and K 2 TaF 7 was precipitated from the leachate using KCl. Results: Minimum Ta extraction into solution during sodium hydroxide sinter leaching, along with complete transfer of W and Mo to the aqueous phase, is achieved at 700°C and a 1:3 (g/g) ratio. Subsequent leaching of the solid residue with an HF-H 2 SO 4 mixture (1 g: 1 mL: 1 mL) enables complete Ta recovery (>99.99%) within 30 minutes. The kinetics of tantalum acid leaching from the residue indicates a shift in the rate-limiting step from diffusion to chemical reaction. Through precipitation from the sulfate-fluoride solution using a KCl solution, Ta was obtained as K 2 TaF 7 (~52.64% Ta). Discussion: The presented process allows for the selective separation of tantalum from tungsten and molybdenum. The kinetics show a transition from diffusion to reaction, which enables efficient extraction at room temperature. Controlling impurities in K 2 TaF 7 requires further refinement. Conclusion: An effective two-stage hydrometallurgical process (alkaline sintering + acid leaching) enables high-yield tantalum recovery from superalloy grinding waste while facilitating valuable component recycling from heat-resistant alloy residues.

  • Adsorption recovery of amines from water solution

    by Mendeleev University of Chemical Technology of Russia, I. E. Targanov, A. L. Gakiev, А. А. Кadirbekov, South Kazakhstan University named after. M. Auezova, I. D. Troshkina, N. А. Bektenov, Abai Kazakh National Pedagogical University, А. G. Cherednichenko, Peoples’ Friendship University of Russia (RUDN University)

    Aquatic biological resources are an important part of the ecosystems of our planet, since they are involved in economic turnover as a source of food. The composition of water, including waste water from enterprises, has a direct impact on the state of aquatic biological resources. To extract and concentrate metals from solutions, hydrometallurgical processes are used – extraction and sorption. Their implementation is possible with the use of special substances – extractants and in a number of processes – sorption materials (Solvent Impregnated Resins (SIR’s) and Levextrel’s) with a mobile phase of the extractant, combining the properties of sorbents and extractants. Despite the advantages of the latter, such as high kinetic parameters, lack of swelling and high values of mechanical strength, they are characterized by the disadvantages of extraction methods – the entrainment of the extractant into the aqueous phase in dissolved and emulsion forms. Under static conditions, the possibility of purification of aqueous solutions containing primary or tertiary amine by adsorption on carbon materials (activated carbon NWC, carbon NWC-T modified with carbon nanotubes, CS-PTFE modified with polytetrafluoroethylene), as well as on styrene-divinylbenzene nonionic copolymer Porolas-T and a natural shell rock adsorbent was studied. The kinetics of adsorption of аmines Primene-JMT and TOA from aqueous solutions by these adsorbents has been studied by the method of a limited volume of solution. Of the known pseudo-first order, pseudo-second order and Elovich models, the pseudo-second order model describes kinetic data more adequately (R2>0.99). The values of the distribution coefficients and the rate constants of adsorption of Primene-JMT and TOA are determined. A block diagram of adsorption purification of aqueous solutions from amines is proposed, the implementation of which will reduce the toxicity of waste solutions and return some of the expensive extractant to circulation.

  • Open Access

    Oxidative leaching of rhenium from grinding waste of rhenium-containing superalloys

    by I. E. Targanov, M. A. Solodovnikov, I. D. Troshkina

    The study investigated the feasibility of oxidative leaching rhenium in the presence of hydrochloric acid from machining waste (grinding waste) derived from products made of ZhS-32VI, a nickel-based heat-resistant alloy containing rhenium. This was achieved through agitation leaching process. The grinding waste fraction size of –0.071 mm, which accounted for the highest yield (49.2 wt.%), was utilized in the experiments. The rhenium leaching process was conducted in two variations: in the first option, grinding waste was mixed with a hydrochloric acid solution at ~100 °C, followed by the addition of hydrogen peroxide to the leaching solution after it had cooled; in the second option, leaching was performed using a hydrochloric acid solution with the gradual addition of hydrogen peroxide solution. The highest degree of rhenium leaching (91.0 %) was achieved in the first option. In this case, the initial concentration of hydrochloric acid was 8 M, and the molar ratio of the added reagents was ν(HCl): ν(H2O2) = 2.7 : 1.0. The kinetics of nickel leaching using a 6 M hydrochloric acid solution at 70 °C, with a solid-to-liquid phase ratio of 1 g : 50 ml, was also examined. The analysis of the kinetic data, processed using the “contracting sphere,” Ginstling–Brounshtein, and Kazeev–Erofeev models, indicates that the nickel leaching process occurs within the kinetic region. Additionally, the kinetics of rhenium leaching from the solid residue obtained after the hydrochloric acid leaching of nickel from grinding waste was investigated. Employing the same kinetic models to analyze the data, it was determined that the limiting stage of this process involves the diffusion of hydrogen peroxide within the rhenium-containing solid residue.


  • Open Access

    Sorption of cobalt by anion exchangers from solutions for complex processing of rhenium-containing superalloys waste

    by Igor Targanov, Elizaveta Buintseva, Irina Troshkina

    The possibility of cobalt sorption of by anion exchangers from hydrochloric acid solutions in the presence of nickel was evaluated in the paper. The highest value of sorption capacity was observed in the gel anion exchange resin with pyridinium functional groups (Axionit VPA G.2.4) and the macroporous anion exchange resin with functional groups of secondary and tertiary amine (Indion 850). Processing of cobalt sorption isotherms with Indion 850 and Lewatit MP 800 anion exchangers was carried out using the Langmuir equation with constant values of (7⋅10–2 ± 0.03) and (0.2 ± 0.02) L⋅mg–1, the values of the maximum sorption capacity were (109 ± 5) and (74 ± 3) mg⋅g–1, respectively. The value of the Freundlich constant during the treatment of the sorption isotherm of cobalt with anionite Axionit VPA G.2.4 was (9.6 ± 0.3) mg⋅g–1. The kinetics of cobalt sorption by Axionit VPA G.2.4 and Indion 850 anionites was studied; the kinetic data of cobalt sorption with the highest value of the coefficient of determination R2 are described using the pseudo-second order equation. Using mathematical processing of the kinetic data of cobalt sorption according to the Weber-Morris equation, the intradiffusion nature of sorption was determined. The analysis of the results of the influence of elements accompanying the complex processing of waste rhenium-containing superalloys – iron, aluminum and chromium – suggests that iron and chromium have a competitive effect on the sorption of cobalt due to the possibility of the formation of their anionic forms in hydrochloric acid solutions for processing secondary rhenium-containing raw materials.

  • Open Access

    Prospects for selective-and-advanced recovery of rhenium from pregnant solutions of in-situ leaching of uranium ores at Dobrovolnoye deposit

    by A. A. Rudenko, I. D. Troshkina, V. V. Danileyko, O. S. Barabanov, F. Ya. Vatsura

    Analysis of exploration materials and market conditions showed that by-product recovery of rhenium, one of the rarest strategic elements of the periodic system, was not always effective in processing the whole volume of pregnant uranium-bearing solutions. The main goal of the research was to develop an effective method for recovery rhenium from pregnant solutions in in-situ uranium leaching. The objectives of the research were as follows: evaluation of the possibility of selective-and-advanced recovery of rhenium from ores by in-situ leaching method and comparison of the technological advantages of the new proposed method with the known ones. The study involved the analysis of historical geological, mineralogical and geochemical information on the Dobrovolnoye deposit and analysis of technological aspects of by-product recovery of rhenium in the world practice. A selective-and-advanced scheme of rhenium recovery from pregnant uranium-bearing sulfate (sulfuric acid) solutions of the Dobrovolnoye deposit ISL (Russia) using mobile installations was proposed. The process has the following features: zoning of production blocks when constructing injection and extraction (pumping) wells; piping of selective extraction wells into a separate collecting pipe; implementation of advanced rhenium sorption. The process implementation makes it possible to obtain rhenium from economically viable areas of the uranium deposit. The mobile installation includes the following main units: a filter for purification (aftertreatment) to remove suspension, a chain of sorption apparatuses (sorption filters or columns), connecting fittings, control and measuring instruments. The sorption apparatuses are filled with rhenium-selective ionite (ion exchanger). As a selective sorbent for the primary concentration of rhenium from sulfate solutions (pH 2), weakly basic nitrogen-bearing ionites containing amine functional groups of various types can be used. If further concentration of rhenium is required, in order to unify the equipment used, materials with a mobile extractant phase (so-called TVEXs (solid extractants or Levextrel resins in English literature) and so-called “impregnated” or “impregnates”), such as TVEX-DIDA containing diisododecyl amine, or TAA-impregnate containing trialkylamine, can be used. Rhenium desorption from these materials is carried out by an ammonia solution, which allows producing rough ammonium perrhenate from the eluate. Economic aspects of the rhenium selective-andadvanced technology were evaluated. Implementation of the recovery selective-and-advanced technology allows obtaining rhenium from economically-viable areas of the uranium deposit.


  • Sorption of uranium by a gel strongly basic anion exchanger from sulfuric acid solutions of underground leaching

    by Fedor Yaroslavovich Vatsura, Irina Dmitrievna Troshkina, Daria Aleksandrovna Bulanova

    В результате исследования получена изотерма сорбции методом ограниченного объема раствора, исследована кинетика сорбции урана и рассчитаны константы скорости, коэффициенты его диффузии в фазе ионита и кажущаяся энергия активации