A. V. Shilyaev
Research Subjects
A. V. Shilyaev has a total of 2 co-authors. Here are the top co-authors by number of shared publications:
- Irina Dmitrievna Troshkina
Mendeleev University of Chemical Technology of Russia
2 shared publications E. V. Chudinovskih
KChKhK Branch, United Chemical Company Uralchem JSC
1 shared publication
Latest Publications
- 14 November 2026
- Published by National University of Science and Technology MISiS in Izvestiya Vuzov. Tsvetnaya Metallurgiya (Proceedings of Higher Schools. Nonferrous Metallurgy)
Recovery of a rare earth element concentrate during nitric acid processing of phosphate feedstock
This study investigated the recovery of a rare earth element (REE) concentrate from a process liquor generated by dissolving apatite concentrate in nitric acid during phosphate fertilizer production. The concentrate was recovered from the nitrophosphoric acid liquor by precipitation with aqueous ammonia. As the precipitation pH increased from 0.5 to 1.8, the residual REE concentration in the liquor decreased from 0.09 to 0.01 %. The REE content of the concentrate exceeded 30 % at pH 0.8–1.5. Below pH 1.5, the calcium and fluorine contents of the concentrate increased, which was attributed to the lower solubility of monocalcium phosphate and calcium fluoride. The optimum pH range was 0.8–1.5, in which 70–90 % of the REEs precipitated and the REE content of the concentrate exceeded 30 %. At pH 1.0, increasing the neutralization temperature from 60 to 80 °C raised REE recovery by precipitation from 66 to 71 %. The distribution of individual REEs in the precipitate showed no appreciable change over the precipitation pH range of 0.8–1.5. The predominant REEs in the concentrate were cerium (~50 %), neodymium (~15 %), lanthanum (~15 %), and praseodymium (~10 %).
- 14 November 2026
- Published by National University of Science and Technology MISiS in Izvestiya Vuzov. Tsvetnaya Metallurgiya (Proceedings of Higher Schools. Nonferrous Metallurgy)
Recovery of a rare earth element concentrate during nitric acid processing of phosphate feedstock
This study investigated the recovery of a rare earth element (REE) concentrate from a process liquor generated by dissolving apatite concentrate in nitric acid during phosphate fertilizer production. The concentrate was recovered from the nitrophosphoric acid liquor by precipitation with aqueous ammonia. As the precipitation pH increased from 0.5 to 1.8, the residual REE concentration in the liquor decreased from 0.09 to 0.01 %. The REE content of the concentrate exceeded 30 % at pH 0.8–1.5. Below pH 1.5, the calcium and fluorine contents of the concentrate increased, which was attributed to the lower solubility of monocalcium phosphate and calcium fluoride. The optimum pH range was 0.8–1.5, in which 70–90 % of the REEs precipitated and the REE content of the concentrate exceeded 30 %. At pH 1.0, increasing the neutralization temperature from 60 to 80 °C raised REE recovery by precipitation from 66 to 71 %. The distribution of individual REEs in the precipitate showed no appreciable change over the precipitation pH range of 0.8–1.5. The predominant REEs in the concentrate were cerium (~50 %), neodymium (~15 %), lanthanum (~15 %), and praseodymium (~10 %).
- 25 March 2026
- Published by O-Kratkoe Ltd in Theoretical and Applied Ecology
- Vol. 236 (1)
Calcium nitrate anhydrous and ammonium sulfate crystalline obtaining from phosphate fertilizers wastes
Extractive phosphoric acid and phosphoric mineral fertilizers processing forms wastes, phosphogypsum is the main. Phosphogypsum is not widely used due to its low radioactivity. Most of it is accumulated in dumps for long-term storage. Phosphogypsum can be considered as a potential source of calcium, sulfur, phosphorus and rare earths (REs) of the cerium group. The aim of the work is to develop a technology for obtaining calcium nitrate Ca(NO3)2 anhydrous, ammonium sulfate (NH4)2SO4 crystalline and REs’ concentrate from phosphogypsum. We develop a basic process flow diagram that allows separating REs’ concentrate from calcium and sulfur compounds. (NH4)2SO4 is a product of the reaction between phosphogypsum and an excess of ammonium carbonate solution. The resulting phosphochalk is separated from the (NH4)2SO4 solution by filtration. The (NH4)2SO4 solution is neutralized with sulfuric acid to pH 4–6, evaporated, and (NH4)2SO4 crystallized. Phosphochalk is dissolved in excess nitric acid. The resulting acidic Ca(NO3)2 solution is cooled to -10 °C to separate the Ca(NO3)2·4H2O crystals. After the above separating the REs’ concentrate is precipitated with ammonia. After washing with nitric acid at -10 °C, the crystals are dissolved and neutralized with CaCO3 to pH 4. The resulting chalk pulp is filtered, separating Ca(NO3)2 solution from insoluble impurities of calcium phosphate and fluoride. The purified Ca(NO3)2 solution is evaporated and granulated to obtain Ca(NO3)2 anhydrous.
- 25 March 2026
- Published by O-Kratkoe Ltd in Theoretical and Applied Ecology
- Vol. 236 (1)
Calcium nitrate anhydrous and ammonium sulfate crystalline obtaining from phosphate fertilizers wastes
Extractive phosphoric acid and phosphoric mineral fertilizers processing forms wastes, phosphogypsum is the main. Phosphogypsum is not widely used due to its low radioactivity. Most of it is accumulated in dumps for long-term storage. Phosphogypsum can be considered as a potential source of calcium, sulfur, phosphorus and rare earths (REs) of the cerium group. The aim of the work is to develop a technology for obtaining calcium nitrate Ca(NO3)2 anhydrous, ammonium sulfate (NH4)2SO4 crystalline and REs’ concentrate from phosphogypsum. We develop a basic process flow diagram that allows separating REs’ concentrate from calcium and sulfur compounds. (NH4)2SO4 is a product of the reaction between phosphogypsum and an excess of ammonium carbonate solution. The resulting phosphochalk is separated from the (NH4)2SO4 solution by filtration. The (NH4)2SO4 solution is neutralized with sulfuric acid to pH 4–6, evaporated, and (NH4)2SO4 crystallized. Phosphochalk is dissolved in excess nitric acid. The resulting acidic Ca(NO3)2 solution is cooled to -10 °C to separate the Ca(NO3)2·4H2O crystals. After the above separating the REs’ concentrate is precipitated with ammonia. After washing with nitric acid at -10 °C, the crystals are dissolved and neutralized with CaCO3 to pH 4. The resulting chalk pulp is filtered, separating Ca(NO3)2 solution from insoluble impurities of calcium phosphate and fluoride. The purified Ca(NO3)2 solution is evaporated and granulated to obtain Ca(NO3)2 anhydrous.