Liudmyla Tarandushka
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Liudmyla Tarandushka has a total of 37 co-authors. Here are the top co-authors by number of shared publications:
- Nataliia Kostian
Cherkasy State Technological University
10 shared publications Cherkasy State Technological University
8 shared publications- Ivan Tarandushka7 shared publications
- Eduard Klimov
Department of Automobiles and Tractors, Kremenchuk Mykhailo Ostrohradskyi National University, 39600 Kremenchuk, Ukraine
5 shared publications - Miroslaw Smieszek
Department of Technical Systems Engineering, Rzeszow University of Technology, 35-959 Rzeszow, Poland
5 shared publications - Vasyl Mateichyk
Department of Technical Systems Engineering, Rzeszow University of Technology, 35-959 Rzeszow, Poland
5 shared publications
Latest Publications
- Open Access
- 11 June 2026
- Published by Central Ukrainian National Technical University in Central Ukrainian Scientific Bulletin. Technical Sciences
- No. 14(45)
Вплив трансформації транспортної інфраструктури на екологічну безпеку міського середовища в умовах сталого розвитку
В результаті дослідження було визначено, що висока токсичність викидів в українських містах, порівняно з європейськими, обумовлена застарілим технічним станом транспортних засобів, практикою демонтажу систем нейтралізації та використанням палива з підвищеним вмістом сірки. Тому актуальне питання поліпшення екологічної ситуації в містах України вирішується заміною автопарку міських перевезень. З огляду на це було розроблено математичну модель розрахунку кількості прогнозованих шкідливих викидів в результаті вдосконалення структури міського пасажирського автопарку в м. Черкаси. Дана модель базується на визначенні річних викидів основних шкідливих речовин. Це дає змогу адекватно оцінювати результати можливих вдосконалень екології міст.
- 11 June 2026
- Published by Central Ukrainian National Technical University in Central Ukrainian Scientific Bulletin. Technical Sciences
- No. 14(45)
Open AccessВплив трансформації транспортної інфраструктури на екологічну безпеку міського середовища в умовах сталого розвитку
В результаті дослідження було визначено, що висока токсичність викидів в українських містах, порівняно з європейськими, обумовлена застарілим технічним станом транспортних засобів, практикою демонтажу систем нейтралізації та використанням палива з підвищеним вмістом сірки. Тому актуальне питання поліпшення екологічної ситуації в містах України вирішується заміною автопарку міських перевезень. З огляду на це було розроблено математичну модель розрахунку кількості прогнозованих шкідливих викидів в результаті вдосконалення структури міського пасажирського автопарку в м. Черкаси. Дана модель базується на визначенні річних викидів основних шкідливих речовин. Це дає змогу адекватно оцінювати результати можливих вдосконалень екології міст.
- 1 April 2026
- Published by Springer Nature
- p. 182-192
Temperature Field Modeling of a Lithium-Ion Battery Pack: Optimal Temperature Sensor Placement and Layout Effects
- 1 April 2026
- Published by Springer Nature
- p. 182-192
Temperature Field Modeling of a Lithium-Ion Battery Pack: Optimal Temperature Sensor Placement and Layout Effects
- Open Access
- 26 March 2026
- Published by SHEI Pryazovskyi State Technical University
- Vol. 2 (53) , 225-232
Research on passenger flows of urban transport on the example of Cherkasy city
The paper considers a methodology for determining passenger and transport correspondences based on the analysis of cashless payment transactions for a trip in urban transport. An algorithm for determining passenger trips and passenger correspondences has been developed. The algorithm was formed taking into account the set of tickets (magnetic cards) for cashless passenger payment. The considered algorithm for determining passenger trips (transport correspondences), as well as passenger correspondences that may include several trips, was implemented in the form of a computer program developed in the Delphi programming language using the Microsoft Access relational database management system. It is worth noting that the use of standard software components provides the ability to integrate and use most modern systems without the need for significant modification. As a result of applying the correspondence definition algorithm, a set of correspondences is formed, which is used as a basis for approximating the parameters of the general set of correspondences. It is proven that the share of cashless payments in urban transport corresponds to the normal distribution law. The studies used theoretical methods of scientific research, mathematical modeling methods, and the method of computational experiment. As a result of the research, it was found that determining the patterns of population mobility is a key issue for solving a wide range of transport and urban planning problems. An algorithm for determining passenger trips (transport correspondences) and passenger correspondences (consisting of one or more trips) was developed, implemented in a computer program in the Delphi programming language. As a result of the research, it was found that the patterns of population mobility are a key issue for solving a wide range of transport and urban planning problems
- 26 March 2026
- Published by SHEI Pryazovskyi State Technical University
- Vol. 2 (53) , 225-232
Open AccessResearch on passenger flows of urban transport on the example of Cherkasy city
The paper considers a methodology for determining passenger and transport correspondences based on the analysis of cashless payment transactions for a trip in urban transport. An algorithm for determining passenger trips and passenger correspondences has been developed. The algorithm was formed taking into account the set of tickets (magnetic cards) for cashless passenger payment. The considered algorithm for determining passenger trips (transport correspondences), as well as passenger correspondences that may include several trips, was implemented in the form of a computer program developed in the Delphi programming language using the Microsoft Access relational database management system. It is worth noting that the use of standard software components provides the ability to integrate and use most modern systems without the need for significant modification. As a result of applying the correspondence definition algorithm, a set of correspondences is formed, which is used as a basis for approximating the parameters of the general set of correspondences. It is proven that the share of cashless payments in urban transport corresponds to the normal distribution law. The studies used theoretical methods of scientific research, mathematical modeling methods, and the method of computational experiment. As a result of the research, it was found that determining the patterns of population mobility is a key issue for solving a wide range of transport and urban planning problems. An algorithm for determining passenger trips (transport correspondences) and passenger correspondences (consisting of one or more trips) was developed, implemented in a computer program in the Delphi programming language. As a result of the research, it was found that the patterns of population mobility are a key issue for solving a wide range of transport and urban planning problems
- 20 November 2025
- Published by Lutsk National Technical University in СУЧАСНІ ТЕХНОЛОГІЇ В МАШИНОБУДУВАННІ ТА ТРАНСПОРТІ
- Vol. 2 (25) , 273-283
ВИЗНАЧЕННЯ КОЕФІЦІЄНТА ОПОРУ БІЧНОМУ ВІДВЕДЕННЮ
Проаналізовано існуючі методики та наведено результати експериментальних досліджень щодо визначення коефіцієнта опору бічному відведенню на недеформованій опорній поверхні. Під час дослідження цього коефіцієнта у роботі розглядається шина, складовою частиною цілісного механізму яким є еластичне колесо. Водночас розрізняється рух колеса по криволінійній траєкторії та плоско-паралельний рух з відведенням. Під час руху колеса по криволінійній траєкторії відбувається одночасно бічне зміщення диска та його закручування відносно відбитка шини, що спричинює бічну силу та момент закручування відносно вертикальної осі. Плоско-паралельний рух колеса з відведенням зумовлює бічне зміщення диска відносно відбитка шини, що спричинює бічну силу, яка зміщена відносно центра відбитка шини. Як рух по криволінійній траєкторії, так і плоско-паралельний рух з відведенням пов’язані з бічною силою, яка залежить від коефіцієнта опору бічному відведенню. Запропоновано визначати експериментально коефіцієнт опору бічному відведенню шин вантажних автомобілів, використовуючи автомобіль безпосередньо як тестер. Наведено аналітичні залежності, які пов’язують функціонально коефіцієнт опору бічному відведенню, бічну жорсткість шини, кутову жорсткість відносно вертикальної осі та поздовжню вісь контактного відбитка. Ці залежності дозволяють визначати цей коефіцієнт побічним методом. Подано результати експериментальних та розрахункових даних цього коефіцієнта для широкопрофільної шини 1300х530-533 мод. ВИД-201, яка встановлюється на повнопривідних автомобілях КрАЗ. Результати досліджень можуть стати у нагоді фахівцям, які працюють над покращенням керованості та стійкості руху автомобілів. Ключові слова: коефіцієнт опору бічному відведенню, кут відведення, бічна жорсткість, контактний відбиток шини, методика, недеформована опорна поверхня.
- 20 November 2025
- Published by Lutsk National Technical University in СУЧАСНІ ТЕХНОЛОГІЇ В МАШИНОБУДУВАННІ ТА ТРАНСПОРТІ
- Vol. 2 (25) , 273-283
ВИЗНАЧЕННЯ КОЕФІЦІЄНТА ОПОРУ БІЧНОМУ ВІДВЕДЕННЮ
Проаналізовано існуючі методики та наведено результати експериментальних досліджень щодо визначення коефіцієнта опору бічному відведенню на недеформованій опорній поверхні. Під час дослідження цього коефіцієнта у роботі розглядається шина, складовою частиною цілісного механізму яким є еластичне колесо. Водночас розрізняється рух колеса по криволінійній траєкторії та плоско-паралельний рух з відведенням. Під час руху колеса по криволінійній траєкторії відбувається одночасно бічне зміщення диска та його закручування відносно відбитка шини, що спричинює бічну силу та момент закручування відносно вертикальної осі. Плоско-паралельний рух колеса з відведенням зумовлює бічне зміщення диска відносно відбитка шини, що спричинює бічну силу, яка зміщена відносно центра відбитка шини. Як рух по криволінійній траєкторії, так і плоско-паралельний рух з відведенням пов’язані з бічною силою, яка залежить від коефіцієнта опору бічному відведенню. Запропоновано визначати експериментально коефіцієнт опору бічному відведенню шин вантажних автомобілів, використовуючи автомобіль безпосередньо як тестер. Наведено аналітичні залежності, які пов’язують функціонально коефіцієнт опору бічному відведенню, бічну жорсткість шини, кутову жорсткість відносно вертикальної осі та поздовжню вісь контактного відбитка. Ці залежності дозволяють визначати цей коефіцієнт побічним методом. Подано результати експериментальних та розрахункових даних цього коефіцієнта для широкопрофільної шини 1300х530-533 мод. ВИД-201, яка встановлюється на повнопривідних автомобілях КрАЗ. Результати досліджень можуть стати у нагоді фахівцям, які працюють над покращенням керованості та стійкості руху автомобілів. Ключові слова: коефіцієнт опору бічному відведенню, кут відведення, бічна жорсткість, контактний відбиток шини, методика, недеформована опорна поверхня.
- 26 May 2025
- Published by Central Ukrainian National Technical University in Central Ukrainian Scientific Bulletin. Technical Sciences
- Vol. 2 (11(42))
Development of a Paint Application System Morphological Matrix for Enable Prediction of Restoration Paint Coating Quality on Car Body Parts
Liudmyla Tarandushka, Professor., Doctor of Engineering, Head of vehicles and technology for their operation Department, Cherkasy State Technological University, Cherkasy, Ukraine, ORCID: https://orcid.org/0000-0002-1410-9088, e-mail: l.tarandushka@chdtu.edu.ua Ivan Tarandushka, Senior Lecturer of vehicles and technology for their operation Department, Cherkasy State Technological University, Cherkasy, Ukraine, ORCID: https://orcid.org/0000-0002-5182-3811, e-mail: i.tarandushka@chdtu.edu.ua Increasing the efficiency of the bodywork service by ensuring the necessary conditions for obtaining high-quality paintwork is an important component of car service systems that provide bodywork restoration services. Improving the quality of the paintwork of repaired car body parts leads to a reduction in the costs of car service systems and an increase in their operating efficiency. As a result of the analysis of technologies for restoring the paintwork of car body parts, a scheme of the surface preparation process for painting was developed, consisting of the technological process operations for restoring the paintwork. If we assume that all preparatory operations for applying the paintwork are performed qualitatively, then it is possible to describe the paintwork application system by determining its significant parameters and, based on the morphological analysis method, develop a morphological matrix describing this system. The morphological matrix of the paintwork application system consists of morphological structures and morphological features by which this system is described. The gradation of quantitative variants of morphological features was determined using the method of quantitative assessments. The combination of individual variants of all morphological features forms a new morphological structure of the paint and varnish application system. That is, the morphological matrix allows describing all existing, as well as form new, more effective structures of paint and varnish application systems. This matrix is used to predict the quality of the paint and varnish coating on body parts to be repaired, taking into account the initial parameters of the paint and varnish application system. To determine the most significant morphological features of the system, it is necessary to conduct an examination of at least 20 systems of different morphological structure and use the Farrar-Glober algorithm to determine independent parameters and select the most significant ones among them.
- 26 May 2025
- Published by Central Ukrainian National Technical University in Central Ukrainian Scientific Bulletin. Technical Sciences
- Vol. 2 (11(42))
Development of a Paint Application System Morphological Matrix for Enable Prediction of Restoration Paint Coating Quality on Car Body Parts
Liudmyla Tarandushka, Professor., Doctor of Engineering, Head of vehicles and technology for their operation Department, Cherkasy State Technological University, Cherkasy, Ukraine, ORCID: https://orcid.org/0000-0002-1410-9088, e-mail: l.tarandushka@chdtu.edu.ua Ivan Tarandushka, Senior Lecturer of vehicles and technology for their operation Department, Cherkasy State Technological University, Cherkasy, Ukraine, ORCID: https://orcid.org/0000-0002-5182-3811, e-mail: i.tarandushka@chdtu.edu.ua Increasing the efficiency of the bodywork service by ensuring the necessary conditions for obtaining high-quality paintwork is an important component of car service systems that provide bodywork restoration services. Improving the quality of the paintwork of repaired car body parts leads to a reduction in the costs of car service systems and an increase in their operating efficiency. As a result of the analysis of technologies for restoring the paintwork of car body parts, a scheme of the surface preparation process for painting was developed, consisting of the technological process operations for restoring the paintwork. If we assume that all preparatory operations for applying the paintwork are performed qualitatively, then it is possible to describe the paintwork application system by determining its significant parameters and, based on the morphological analysis method, develop a morphological matrix describing this system. The morphological matrix of the paintwork application system consists of morphological structures and morphological features by which this system is described. The gradation of quantitative variants of morphological features was determined using the method of quantitative assessments. The combination of individual variants of all morphological features forms a new morphological structure of the paint and varnish application system. That is, the morphological matrix allows describing all existing, as well as form new, more effective structures of paint and varnish application systems. This matrix is used to predict the quality of the paint and varnish coating on body parts to be repaired, taking into account the initial parameters of the paint and varnish application system. To determine the most significant morphological features of the system, it is necessary to conduct an examination of at least 20 systems of different morphological structure and use the Farrar-Glober algorithm to determine independent parameters and select the most significant ones among them.
- Open Access
Study of the Influence of the Two-Drive-Axle Bogie Parameters on the Three-Axle Vehicle Handling
The presence of a bogie in three-axle vehicles when moving along a curved trajectory leads to deterioration in its handling and maneuverability. The paper developed a mathematical model of the elastic bogie wheel while moving along a curvilinear trajectory, according to which the bogie wheel simultaneously participates in curvilinear and plane-parallel motion with a slip angle. Such movement of the bogie wheels develops significant lateral and longitudinal forces on the steered wheels, which leads to the movement of the steered wheels with slip, redistribution of the load on them, tire twisting, and a decrease in the steering angle of the outside steered wheel due to the elasticity of the steering trapezoid. Based on the mathematical model of the bogie wheel, an analytical dependence was obtained to determine the minimum turning radius of a three-axle vehicle. The reliability of the analytical dependencies characterizing the movement of the bogie wheel along a curvilinear trajectory was determined by comparing the minimum turning radii of a three-axle vehicle with the intermediate axle lowered and raised. It has been established that the minimum turning radius of a vehicle with a bogie increases compared to a two-axle vehicle and depends on the cornering stiffnesses of the tires of the bogie and steered wheels, the bogie and vehicle wheelbases, the kinematic and elastic parameters of the steering trapezoid, the direction of turning of the steered wheels, and the load on the steered and the bogie wheels.
Open AccessStudy of the Influence of the Two-Drive-Axle Bogie Parameters on the Three-Axle Vehicle Handling
The presence of a bogie in three-axle vehicles when moving along a curved trajectory leads to deterioration in its handling and maneuverability. The paper developed a mathematical model of the elastic bogie wheel while moving along a curvilinear trajectory, according to which the bogie wheel simultaneously participates in curvilinear and plane-parallel motion with a slip angle. Such movement of the bogie wheels develops significant lateral and longitudinal forces on the steered wheels, which leads to the movement of the steered wheels with slip, redistribution of the load on them, tire twisting, and a decrease in the steering angle of the outside steered wheel due to the elasticity of the steering trapezoid. Based on the mathematical model of the bogie wheel, an analytical dependence was obtained to determine the minimum turning radius of a three-axle vehicle. The reliability of the analytical dependencies characterizing the movement of the bogie wheel along a curvilinear trajectory was determined by comparing the minimum turning radii of a three-axle vehicle with the intermediate axle lowered and raised. It has been established that the minimum turning radius of a vehicle with a bogie increases compared to a two-axle vehicle and depends on the cornering stiffnesses of the tires of the bogie and steered wheels, the bogie and vehicle wheelbases, the kinematic and elastic parameters of the steering trapezoid, the direction of turning of the steered wheels, and the load on the steered and the bogie wheels.
- Open Access
- 25 November 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (23) , 10925
The Influence of Steering Axle Design Parameters and Operational Factors on Tire Steering Resistance Torque
This paper presents the results of the study of the kinematics and dynamics of an elastic steered wheel depending on its state, the kingpin unit design parameters, and the tire characteristics in order to obtain dependencies for calculating the tire steering resistance torque in static state and during movement. It was established that when steering in static state, the locked steered wheel is taken as a complex mechanism, and the tire contact patch is rotated about the kingpin axis–support surface intersection point. When turning the unlocked steered wheel, it was determined that the tire contact patch participates in transport and relative motions. The transport motion center is the projection onto the support surface of the center of rotation of the wheel about the kingpin axis. The relative motion center is within the contact patch and is determined experimentally. For both states of the steered wheel, analytical dependencies were obtained for determining the tire steering resistance torque. The results of the analytical studies were experimentally verified on a bench equipped by components and aggregates of a truck, and included an additional rigid false wheel and a special rim. The false wheel made it possible to experimentally determine the tire contact patch transport motion center, and the special rim—to change the knuckle length in the range of 0.22–0.82 m.
- 25 November 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (23) , 10925
Open AccessThe Influence of Steering Axle Design Parameters and Operational Factors on Tire Steering Resistance Torque
This paper presents the results of the study of the kinematics and dynamics of an elastic steered wheel depending on its state, the kingpin unit design parameters, and the tire characteristics in order to obtain dependencies for calculating the tire steering resistance torque in static state and during movement. It was established that when steering in static state, the locked steered wheel is taken as a complex mechanism, and the tire contact patch is rotated about the kingpin axis–support surface intersection point. When turning the unlocked steered wheel, it was determined that the tire contact patch participates in transport and relative motions. The transport motion center is the projection onto the support surface of the center of rotation of the wheel about the kingpin axis. The relative motion center is within the contact patch and is determined experimentally. For both states of the steered wheel, analytical dependencies were obtained for determining the tire steering resistance torque. The results of the analytical studies were experimentally verified on a bench equipped by components and aggregates of a truck, and included an additional rigid false wheel and a special rim. The false wheel made it possible to experimentally determine the tire contact patch transport motion center, and the special rim—to change the knuckle length in the range of 0.22–0.82 m.
- 28 October 2024
- Published by Central Ukrainian National Technical University in Central Ukrainian Scientific Bulletin. Technical Sciences
- Vol. 1 (10(41))
Improving Road Safety Through Computational Analysis of the Aerodynamic Interaction Between a Truck and a Motorcycle
Liudmyla Tarandushka, Professor, Doctor in Technics (Doctor of Technic Sciences), Cherkasy State Technological University, Cherkasy, Ukraine, е-mail: tarandushkal@ukr.net, ORCID ID: 0000-0002-1410-9088 Maksym Rud, Associate Professor, PhD in Technics (Candidate of Technics Sciences), Cherkasy State Technological University, Cherkasy, Ukraine, е-mail: hochspannung77@gmail.com Oleksandr Batrachenko, Professor, Doctor in Technics (Doctor of Technic Sciences), Cherkasy State Technological University, Cherkasy, Ukraine, е-mail: avbatrachenko1980@gmail.com, ORCID ID: 0000-0001-8920-0743 The purpose of this paper is to improve road safety by analyzing the aerodynamic interaction between a truck and a motorcycle using computational fluid dynamics (CFD). The study focuses on evaluating the accuracy and reliability of different turbulence models commonly used in CFD simulations to determine their impact on motorcycle stability and control during overtaking maneuvers. The research involved simulating the aerodynamic flow between a truck and a motorcycle using three different turbulence models: Spalart-Allmaras (SA), k-epsilon (k-ε), and k-omega (k-ω). Simplified CAD models of a European truck and a road motorcycle were created, and airflow structures were analyzed for each turbulence model. The aerodynamic drag acting on both the truck and motorcycle was evaluated, along with the effect of flow structure on motorcycle handling. The analysis included assessing the computational resources required for each model and comparing the predicted results with experimental data from previous studies. The study concludes that different turbulence models produce varying flow structures and aerodynamic forces, with significant differences in their effect on motorcycle stability. The k-ω model was found to provide the most accurate predictions, although further experimental validation is required. The results highlight critical areas where drivers should maintain caution, particularly during overtaking maneuvers near large trucks. Keywords aerodynamic analysis, turbulence models, motorcycle safety, CFD modeling, road safety Full Text: PDF References 1. WHO kicks off a decade of action for road safety. available via WHO. https://www.who.int/news/item/28-10-2021-who-kicks-off-a-decade-of-action-for-road-safety 2. Ahmed S. R., Ramm G., &Faltin G. (1984). Some Salient Features Of The Time-Averaged Ground Vehicle Wake. SAE International Congress and Exposition. 400 Commonwealth Drive, Warrendale, PA, United States,. URL: https://doi.org/10.4271/840300. 3. Igali, D., Mukhmetov, O., Zhao, Y.,Sai Cheong Fok & Soo Lee Teh(2019). Comparative Analysis of Turbulence Models for Automotive Aerodynamic Simulation and Design.International Journal of Automotive Technology. Vol. 20, no. 6. P. 1145–1152. URL: https://doi.org/10.1007/s12239-019-0107-7. 4. 7asmar Halim, Zubair Saing (2020). Overtake Behavior Model of Motorcycle on Accident Risk. International Journal of Advanced Science and Technology, 29(5), P. 12556–12567. DOI:10.5281/zenodo.39086822020. 5. Corin R. J., He L., Dominy R. G. (2008). A CFD investigation into the transient aerodynamic forces on overtaking road vehicle models. Journal of Wind Engineering and Industrial Aerodynamics. Vol. 96, no. 8-9. P. 1390–1411. URL: https://doi.org/10.1016/j.jweia.2008.03.006. 6. Ahmad Hammad, Tao Xing, Vibhav Durgesh & John C. Crepeau (2019). Effect of Crosswinds on the Aerodynamics of Two Passenger Cars Crossing Each Other / International Journal of Automotive Technology. Vol. 20, no. 5. P. 997–1008. URL: https://doi.org/10.1007/s12239-019-0094-8. 7. Howell J., Garry K., &Holt J. (2014). The Aerodynamics of a Small Car Overtaking a Truck. SAE International Journal of Passenger Cars - Mechanical Systems. Vol. 7, no. 2. P. 626–638. URL: https://doi.org/10.4271/2014-01-0604. 8. Bodhisagar J Tayade, P.S. Bajaj. (2022). A Review on The Effect of Aerodynamics on Car Overtaking Truck Using CFD Analysis Method. International Research Journal of Engineering and Technology (IRJET). Volume: 09 Issue: 08. P. 1273–1279. 9. Wiński K., &Piechna A. (2022).Comprehensive CFD Aerodynamic Simulation of a Sport Motorcycle. Energies. Vol. 15, no. 16. P. 5920. URL: https://doi.org/10.3390/en15165920. 10. M. Palanivendhan, Devansh Nagpal, D. Ayush Rao, Jennifer Philip, M. Srinivas Ganapathi (2021). Design and analysis of an aerodynamic kit for a two wheeled race motorcycle / Materials Today: Proceedings. Vol. 45. P. 7239–7246. URL: https://doi.org/10.1016/j.matpr.2021.02.635. Citations 1. WHO kicks off a decade of action for road safety. available via WHO. URL: https://www.who.int/news/item/28-10-2021-who-kicks-off-a-decade-of-action-for-road-safety (date of access: 17.10.2024). 2. Ahmed S. R., Ramm G., Faltin G. Some Salient Features Of The Time-Averaged Ground Vehicle Wake. SAE International Congress and Exposition. 400 Commonwealth Drive, Warrendale, PA, United States, 1984. URL: https://doi.org/10.4271/840300 (date of access: 17.10.2024). 3. Comparative Analysis of Turbulence Models for Automotive Aerodynamic Simulation and Design / D. Igali et al. International Journal of Automotive Technology. 2019. Vol. 20, no. 6. P. 1145–1152. URL: https://doi.org/10.1007/s12239-019-0107-7 (date of access: 17.10.2024). 4. Hasmar Halim, Zubair Saing. Overtake Behavior Model of Motorcycle on Accident Risk. International Journal of Advanced Science and Technology, 29(5), P. 12556–12567. DOI:10.5281/zenodo.39086822020. 5. Corin R. J., He L., Dominy R. G. A CFD investigation into the transient aerodynamic forces on overtaking road vehicle models. Journal of Wind Engineering and Industrial Aerodynamics. 2008. Vol. 96, no. 8-9. P. 1390–1411. URL: https://doi.org/10.1016/j.jweia.2008.03.006 (date of access: 17.10.2024). 6. Effect of Crosswinds on the Aerodynamics of Two Passenger Cars Crossing Each Other / A. Hammad et al. International Journal of Automotive Technology. 2019. Vol. 20, no. 5. P. 997–1008. URL: https://doi.org/10.1007/s12239-019-0094-8 (date of access: 17.10.2024). 7. Howell J., Garry K., Holt J. The Aerodynamics of a Small Car Overtaking a Truck. SAEInternational Journal of Passenger Cars - Mechanical Systems. 2014. Vol. 7, no. 2. P. 626–638. URL: https://doi.org/10.4271/2014-01-0604 (date of access: 17.10.2024). 8. Bodhisagar J Tayade, P.S. Bajaj. A Review on The Effect of Aerodynamics on Car Overtaking Truck Using CFD Analysis Method. International Research Journal of Engineering and Technology (IRJET). 2022. Volume: 09 Issue: 08. P. 1273–1279. 9. Wiński K., Piechna A. Comprehensive CFD Aerodynamic Simulation of a Sport Motorcycle. Energies. 2022. Vol. 15, no. 16. P. 5920. URL: https://doi.org/10.3390/en15165920 (date of access: 17.10.2024). 10. Design and analysis of an aerodynamic kit for a two wheeled race motorcycle / M.Palanivendhan et al. Materials Today: Proceedings. 2021. Vol. 45. P. 7239–7246. URL: https://doi.org/10.1016/j.matpr.2021.02.635 (date of access: 17.10.2024). Copyright (c) 2024 Liudmyla Tarandushka, Maksym Rud, Oleksandr Batrachenko
- 28 October 2024
- Published by Central Ukrainian National Technical University in Central Ukrainian Scientific Bulletin. Technical Sciences
- Vol. 1 (10(41))
Improving Road Safety Through Computational Analysis of the Aerodynamic Interaction Between a Truck and a Motorcycle
Liudmyla Tarandushka, Professor, Doctor in Technics (Doctor of Technic Sciences), Cherkasy State Technological University, Cherkasy, Ukraine, е-mail: tarandushkal@ukr.net, ORCID ID: 0000-0002-1410-9088 Maksym Rud, Associate Professor, PhD in Technics (Candidate of Technics Sciences), Cherkasy State Technological University, Cherkasy, Ukraine, е-mail: hochspannung77@gmail.com Oleksandr Batrachenko, Professor, Doctor in Technics (Doctor of Technic Sciences), Cherkasy State Technological University, Cherkasy, Ukraine, е-mail: avbatrachenko1980@gmail.com, ORCID ID: 0000-0001-8920-0743 The purpose of this paper is to improve road safety by analyzing the aerodynamic interaction between a truck and a motorcycle using computational fluid dynamics (CFD). The study focuses on evaluating the accuracy and reliability of different turbulence models commonly used in CFD simulations to determine their impact on motorcycle stability and control during overtaking maneuvers. The research involved simulating the aerodynamic flow between a truck and a motorcycle using three different turbulence models: Spalart-Allmaras (SA), k-epsilon (k-ε), and k-omega (k-ω). Simplified CAD models of a European truck and a road motorcycle were created, and airflow structures were analyzed for each turbulence model. The aerodynamic drag acting on both the truck and motorcycle was evaluated, along with the effect of flow structure on motorcycle handling. The analysis included assessing the computational resources required for each model and comparing the predicted results with experimental data from previous studies. The study concludes that different turbulence models produce varying flow structures and aerodynamic forces, with significant differences in their effect on motorcycle stability. The k-ω model was found to provide the most accurate predictions, although further experimental validation is required. The results highlight critical areas where drivers should maintain caution, particularly during overtaking maneuvers near large trucks. Keywords aerodynamic analysis, turbulence models, motorcycle safety, CFD modeling, road safety Full Text: PDF References 1. WHO kicks off a decade of action for road safety. available via WHO. https://www.who.int/news/item/28-10-2021-who-kicks-off-a-decade-of-action-for-road-safety 2. Ahmed S. R., Ramm G., &Faltin G. (1984). Some Salient Features Of The Time-Averaged Ground Vehicle Wake. SAE International Congress and Exposition. 400 Commonwealth Drive, Warrendale, PA, United States,. URL: https://doi.org/10.4271/840300. 3. Igali, D., Mukhmetov, O., Zhao, Y.,Sai Cheong Fok & Soo Lee Teh(2019). Comparative Analysis of Turbulence Models for Automotive Aerodynamic Simulation and Design.International Journal of Automotive Technology. Vol. 20, no. 6. P. 1145–1152. URL: https://doi.org/10.1007/s12239-019-0107-7. 4. 7asmar Halim, Zubair Saing (2020). Overtake Behavior Model of Motorcycle on Accident Risk. International Journal of Advanced Science and Technology, 29(5), P. 12556–12567. DOI:10.5281/zenodo.39086822020. 5. Corin R. J., He L., Dominy R. G. (2008). A CFD investigation into the transient aerodynamic forces on overtaking road vehicle models. Journal of Wind Engineering and Industrial Aerodynamics. Vol. 96, no. 8-9. P. 1390–1411. URL: https://doi.org/10.1016/j.jweia.2008.03.006. 6. Ahmad Hammad, Tao Xing, Vibhav Durgesh & John C. Crepeau (2019). Effect of Crosswinds on the Aerodynamics of Two Passenger Cars Crossing Each Other / International Journal of Automotive Technology. Vol. 20, no. 5. P. 997–1008. URL: https://doi.org/10.1007/s12239-019-0094-8. 7. Howell J., Garry K., &Holt J. (2014). The Aerodynamics of a Small Car Overtaking a Truck. SAE International Journal of Passenger Cars - Mechanical Systems. Vol. 7, no. 2. P. 626–638. URL: https://doi.org/10.4271/2014-01-0604. 8. Bodhisagar J Tayade, P.S. Bajaj. (2022). A Review on The Effect of Aerodynamics on Car Overtaking Truck Using CFD Analysis Method. International Research Journal of Engineering and Technology (IRJET). Volume: 09 Issue: 08. P. 1273–1279. 9. Wiński K., &Piechna A. (2022).Comprehensive CFD Aerodynamic Simulation of a Sport Motorcycle. Energies. Vol. 15, no. 16. P. 5920. URL: https://doi.org/10.3390/en15165920. 10. M. Palanivendhan, Devansh Nagpal, D. Ayush Rao, Jennifer Philip, M. Srinivas Ganapathi (2021). Design and analysis of an aerodynamic kit for a two wheeled race motorcycle / Materials Today: Proceedings. Vol. 45. P. 7239–7246. URL: https://doi.org/10.1016/j.matpr.2021.02.635. Citations 1. WHO kicks off a decade of action for road safety. available via WHO. URL: https://www.who.int/news/item/28-10-2021-who-kicks-off-a-decade-of-action-for-road-safety (date of access: 17.10.2024). 2. Ahmed S. R., Ramm G., Faltin G. Some Salient Features Of The Time-Averaged Ground Vehicle Wake. SAE International Congress and Exposition. 400 Commonwealth Drive, Warrendale, PA, United States, 1984. URL: https://doi.org/10.4271/840300 (date of access: 17.10.2024). 3. Comparative Analysis of Turbulence Models for Automotive Aerodynamic Simulation and Design / D. Igali et al. International Journal of Automotive Technology. 2019. Vol. 20, no. 6. P. 1145–1152. URL: https://doi.org/10.1007/s12239-019-0107-7 (date of access: 17.10.2024). 4. Hasmar Halim, Zubair Saing. Overtake Behavior Model of Motorcycle on Accident Risk. International Journal of Advanced Science and Technology, 29(5), P. 12556–12567. DOI:10.5281/zenodo.39086822020. 5. Corin R. J., He L., Dominy R. G. A CFD investigation into the transient aerodynamic forces on overtaking road vehicle models. Journal of Wind Engineering and Industrial Aerodynamics. 2008. Vol. 96, no. 8-9. P. 1390–1411. URL: https://doi.org/10.1016/j.jweia.2008.03.006 (date of access: 17.10.2024). 6. Effect of Crosswinds on the Aerodynamics of Two Passenger Cars Crossing Each Other / A. Hammad et al. International Journal of Automotive Technology. 2019. Vol. 20, no. 5. P. 997–1008. URL: https://doi.org/10.1007/s12239-019-0094-8 (date of access: 17.10.2024). 7. Howell J., Garry K., Holt J. The Aerodynamics of a Small Car Overtaking a Truck. SAEInternational Journal of Passenger Cars - Mechanical Systems. 2014. Vol. 7, no. 2. P. 626–638. URL: https://doi.org/10.4271/2014-01-0604 (date of access: 17.10.2024). 8. Bodhisagar J Tayade, P.S. Bajaj. A Review on The Effect of Aerodynamics on Car Overtaking Truck Using CFD Analysis Method. International Research Journal of Engineering and Technology (IRJET). 2022. Volume: 09 Issue: 08. P. 1273–1279. 9. Wiński K., Piechna A. Comprehensive CFD Aerodynamic Simulation of a Sport Motorcycle. Energies. 2022. Vol. 15, no. 16. P. 5920. URL: https://doi.org/10.3390/en15165920 (date of access: 17.10.2024). 10. Design and analysis of an aerodynamic kit for a two wheeled race motorcycle / M.Palanivendhan et al. Materials Today: Proceedings. 2021. Vol. 45. P. 7239–7246. URL: https://doi.org/10.1016/j.matpr.2021.02.635 (date of access: 17.10.2024). Copyright (c) 2024 Liudmyla Tarandushka, Maksym Rud, Oleksandr Batrachenko
- 28 October 2024
- Published by Central Ukrainian National Technical University in Central Ukrainian Scientific Bulletin. Technical Sciences
- Vol. 1 (10(41))
Exploring opportunities to improve freighttransportation
Liudmyla Tarandushka, Professor, Doctor in Technics (Doctor of Technic Sciences), Cherkasy State Technological University, Cherkasy, Ukraine, е-mail: tarandushkal@ukr.net, ORCID ID: 0000-0002-1410-9088 Olexandr Kravchenko, Associate Professor, PhD in Technics (Candidate of Technics Sciences), Vinnytsia National Technical University, Vinnytsia, Ukraine, University of Žilina,Žilina, Slovak Republic, е-mail: oleksandr.kravchenko@fstroj.uniza.s, ORCID ID: 000-0003-4677-2535 Yan Tarandushka, student, Cherkasy State Technological University, Cherkasy, Ukraine, University of Žilina,Žilina, Slovak Republic е-mail: an453620@gmail.com, ORCID ID: 0009-0004-6103-800X The possibilities of freight transportation organization improving for the formation of an effective management model of the transport and logistics complex of the country are studied. The directions of improvement of freight transportation by sea transport are determined, as the one that performs the largest transport work on the transportation of goods. It is determined that the use of artificial intelligence in sea freight transportation will make it possible to control the temperature regimes in containers for storing the quality of their cargo, improve the transportation process by accelerating the selection of participants in the transport process, choosing the optimal transportation route, taking into account the shortcomings of past transport processes, speed up the conclusion of contracts for the transportation of goods, identify risks, monitor the health of the crew and provide it on time medical care. At the same time, ways to reduce environmental pollution in the operation of maritime transport have been identified, namely: the use of equipment that purifies exhaust gases on ships, the use of Panamax-type vessels using fuel that has a low content of sulfur and other harmful substances. Also, the development of the Arctic Northern Sea Route will make it possible to speed up cargo transportation from China to Northern Europe. Keywords transport and logistics complex, multimodal transportation,sea transport, cargo Full Text: PDF References 1. Gurenko A.V., &Zubov S.V. (2020).Implementation of intelligent logistics technologies in the infrastructure complex of maritime transport. Economic Bulletin of Donbas No 3(61).P. 146-153[in Ukrainian]. 2. Information on water transport of Ukraine. Ministry of Infrastructure of Ukraine. Retrieved from: https://mtu.gov.ua/content/ informaciya-pro-vodniy-transport-ukraini.html[in Ukrainian]. 3. Nykyforuk O.I. (2018). Development of transport with the aim of restoration and growth of the Ukrainian economy: scientific report. National Academy of Sciences of Ukraine, State Institution "Institute of Econ. and predicted. National Academy of Sciences of Ukraine". Kyiv, 200 p. [in Ukrainian]. 4. Belyaeva G.E., &Pustovit O.G. (2018) Analysis of the essence and conditions for the formation of the entrepreneurial potential of enterprises in the maritime industry. Development of methods of management and management in transport. No 1(62). P. 106-116[in Ukrainian]. 5. Maryenko M.,& Kovalenko V. (2023) Artificial Intelligence and Open Science in Education. Physics and Mathematics Education,. Volume 38. No 1. P. 48-53. [in Ukrainian]. 6. Krenn M., Pollice R., Guo S., Aldeghi M., Cervera-LiertaA., Friederich, P., Gomes G., Hase F., Jinich A., Nigam A. K., Yao Z and Aspuru-Guzik A. (2022) On scientific understanding with artificial intelligence. Nature Reviews Physics, 4. P. 761–769[in English] 7. Libelium & SmartDataSystem present solar panel monitoring kits for photovoltaic plants with LoT. Retrieved from: https://www.thesmartcityjournal.com/en/companies/libelium-and-smartdatasystem-present-solar-panel-monitoring-kits-that-control-photovoltaic-plants-performance-with-iot-technology [in English]. 8. Stovba T.A. (2023) Phronesis of the use of artificial intelligence in the maritime industry. Scientific Perspectives No 7(37).P. 387-398 [in Ukrainian]. 9. Konecranes wins order in Rotterdam for mobile harbor crane Powered by Ecolifting. Retrieved from: https://www.konecranes.com/press-releases/konecranes-wins-order-in-rotterdam-for-mobile-harbor-crane-powered-by-ecolifting[in English]. 10. Maritime logistics: to new challenges (2019) https://www.apk-inform.com/uk/exclusive/topic/1500695[in Ukrainian]. 11. Onboard with marine scrubbers - resilient solutions for lower emissions (2020) Retrieved from:https://nickelinstitute.org/en/blog/2020%E5%B9%B4/march/onboard-with-marine-scrubbers[in English]. 12. Jafari M., GhasemiR, MehrabiY., YazdanbakhshA., &Hajibabaei M. (2012) Influence of liquid and gas flow rates on sulfuric acid mist removal from air by packed bed towerIranian Journal of Environmental Health Sciences & Engineering,Retrieved from:https://www.researchgate.net/figure/Counter-current-single-stage-packed-tower-scrubber_fig1_235390349[in English]. 13. Morrison B. Race-to-the-Top: East and Gulf Coast Ports Prepare for a Post-Panamax World (2012) Retrieved from:https://www.researchgate.net/publication/305331669_Race-to-the-Top_East_and_Gulf_Coast_Ports_Prepare_for_a_Post-Panamax_World 14. China's Arctic Course: Scientific and Practical Aspects (2017) Retrieved from: https://sinologist.com.ua/koshovyj-s-arktychnyj-kurs-kytayu-naukovyj-ta-praktychnyj-aspekt. Citations 1. Гуренко А. В., Зубов С. В. Впровадження інтелектуальних логістичних технологій в інфраструктурний комплекс морського транспорту.Економічний вісник Донбасу. 2020. № 3(61). С. 146-153, doi: 10.12958/1817-3772-2020-3(61)-146-153. 2. Сайт «Міністерство розвитку громад та територій України URL: https://mtu.gov.ua/. 26.09.2024 3. Никифорук О.І. Розвиток транспорту з метою відновлення і зростання української економіки: наукова доповідь.К.: НАН України, 2018. 200 с. 4. Бєляєва Г.Є., Пустовіт О.Г. Аналіз сутності та умов формування підприємницького потенціалу підприємств морської галузі. Розвиток методів управління та господарювання на транспорті. 2018. No 1(62). С. 106-116. 5. Мар’єнко М., Коваленко В. Штучний інтелект та відкрита наука в освіті. Фізико-математична освіта. 2023. Том 38. No 1. С. 48-53. DOI: 10.31110/2413-1571-2023-038-1-007. 6. Krenn M., Pollice R., Guo S., Aldeghi M., Cervera-Lierta A., Friederich P., Gomes G., Hase F., Jinich A., Nigam A., Yao Z and Aspuru-Guzik A. On scientific understanding with artificial intelligence. Nature Reviews Physics. 2022. 4. P. 761–769. 7. Сайт «Libelium & SmartDataSystem present solar panel monitoring kits for photovoltaic plants with LoT. Retrieved» URL: https://www.thesmartcityjournal.com/en/companies/libelium-and-smartdatasystem-present-solar-panel-monitoring-kits-that-control-photovoltaic-plants-performance-with-iot-technology. 27.09.2024. 8. Стовба T.A. Фронезіс використання штучного інтелекту у морській галузі. Наукові перспективи. 2023. № 7(37). C. 387-398. doi: 10.52058/2708-7530-2023-7(37)-387-398. 9. Сайт «Konecranes». Konecranes wins order in Rotterdam for mobile harbor crane Powered by Ecolifting. URL: https://www.konecranes.com/press-releases/konecranes-wins-order-in-rotterdam-for-mobile-harbor-crane-powered-by-ecolifting. 26.09.2024. 10. Сайт «АПК ІНФОРМ» Морська логістика: до нових викликів [Електронний ресурс].Режим доступу: https://www.apk-inform.com/uk/exclusive/topic/1500695. 28.09.2024. 11. Сайт «Nickel Institute». Onboard with marine scrubbers - resilient solutions for lower emissions. URL: https://nickelinstitute.org/en/blog/2020%E5%B9%B4/march/onboard-with-marine-scrubbers. 28.09.2024. 12. Jafari M., GhasemiR, MehrabiY., YazdanbakhshA., Hajibabaei M. Influence of liquid and gas flow rates on sulfuric acid mist removal from air by packed bed tower.Iranian Journal of Environmental Health Sciences & Engineering. URL: https://www.researchgate.net/figure/Counter-current-single-stage-packed-tower-scrubber_fig1_235390349. 28.09.2024. 13. Morrison B. Race-to-the-Top.East and Gulf Coast Ports Prepare for a Post-Panamax World. URL: https://www.researchgate.net/publication/305331669_Race-to-the-Top_East_and_Gulf_Coast_Ports_Prepare_for_a_Post-Panamax_World. 28.09.2024. 14. Сайт «Українська асоціація китаєзнавців».Арктичний курс Китаю: науковий та практичний аспект. URL: https://sinologist.com.ua/koshovyj-s-arktychnyj-kurs-kytayu-naukovyj-ta-praktychnyj-aspekt.28.09.2024. Copyright (c) 2024 Lyudmila Tarandushka, Olexandr Kravchenko, Yan Tarandushka
- 28 October 2024
- Published by Central Ukrainian National Technical University in Central Ukrainian Scientific Bulletin. Technical Sciences
- Vol. 1 (10(41))
Exploring opportunities to improve freighttransportation
Liudmyla Tarandushka, Professor, Doctor in Technics (Doctor of Technic Sciences), Cherkasy State Technological University, Cherkasy, Ukraine, е-mail: tarandushkal@ukr.net, ORCID ID: 0000-0002-1410-9088 Olexandr Kravchenko, Associate Professor, PhD in Technics (Candidate of Technics Sciences), Vinnytsia National Technical University, Vinnytsia, Ukraine, University of Žilina,Žilina, Slovak Republic, е-mail: oleksandr.kravchenko@fstroj.uniza.s, ORCID ID: 000-0003-4677-2535 Yan Tarandushka, student, Cherkasy State Technological University, Cherkasy, Ukraine, University of Žilina,Žilina, Slovak Republic е-mail: an453620@gmail.com, ORCID ID: 0009-0004-6103-800X The possibilities of freight transportation organization improving for the formation of an effective management model of the transport and logistics complex of the country are studied. The directions of improvement of freight transportation by sea transport are determined, as the one that performs the largest transport work on the transportation of goods. It is determined that the use of artificial intelligence in sea freight transportation will make it possible to control the temperature regimes in containers for storing the quality of their cargo, improve the transportation process by accelerating the selection of participants in the transport process, choosing the optimal transportation route, taking into account the shortcomings of past transport processes, speed up the conclusion of contracts for the transportation of goods, identify risks, monitor the health of the crew and provide it on time medical care. At the same time, ways to reduce environmental pollution in the operation of maritime transport have been identified, namely: the use of equipment that purifies exhaust gases on ships, the use of Panamax-type vessels using fuel that has a low content of sulfur and other harmful substances. Also, the development of the Arctic Northern Sea Route will make it possible to speed up cargo transportation from China to Northern Europe. Keywords transport and logistics complex, multimodal transportation,sea transport, cargo Full Text: PDF References 1. Gurenko A.V., &Zubov S.V. (2020).Implementation of intelligent logistics technologies in the infrastructure complex of maritime transport. Economic Bulletin of Donbas No 3(61).P. 146-153[in Ukrainian]. 2. Information on water transport of Ukraine. Ministry of Infrastructure of Ukraine. Retrieved from: https://mtu.gov.ua/content/ informaciya-pro-vodniy-transport-ukraini.html[in Ukrainian]. 3. Nykyforuk O.I. (2018). Development of transport with the aim of restoration and growth of the Ukrainian economy: scientific report. National Academy of Sciences of Ukraine, State Institution "Institute of Econ. and predicted. National Academy of Sciences of Ukraine". Kyiv, 200 p. [in Ukrainian]. 4. Belyaeva G.E., &Pustovit O.G. (2018) Analysis of the essence and conditions for the formation of the entrepreneurial potential of enterprises in the maritime industry. Development of methods of management and management in transport. No 1(62). P. 106-116[in Ukrainian]. 5. Maryenko M.,& Kovalenko V. (2023) Artificial Intelligence and Open Science in Education. Physics and Mathematics Education,. Volume 38. No 1. P. 48-53. [in Ukrainian]. 6. Krenn M., Pollice R., Guo S., Aldeghi M., Cervera-LiertaA., Friederich, P., Gomes G., Hase F., Jinich A., Nigam A. K., Yao Z and Aspuru-Guzik A. (2022) On scientific understanding with artificial intelligence. Nature Reviews Physics, 4. P. 761–769[in English] 7. Libelium & SmartDataSystem present solar panel monitoring kits for photovoltaic plants with LoT. Retrieved from: https://www.thesmartcityjournal.com/en/companies/libelium-and-smartdatasystem-present-solar-panel-monitoring-kits-that-control-photovoltaic-plants-performance-with-iot-technology [in English]. 8. Stovba T.A. (2023) Phronesis of the use of artificial intelligence in the maritime industry. Scientific Perspectives No 7(37).P. 387-398 [in Ukrainian]. 9. Konecranes wins order in Rotterdam for mobile harbor crane Powered by Ecolifting. Retrieved from: https://www.konecranes.com/press-releases/konecranes-wins-order-in-rotterdam-for-mobile-harbor-crane-powered-by-ecolifting[in English]. 10. Maritime logistics: to new challenges (2019) https://www.apk-inform.com/uk/exclusive/topic/1500695[in Ukrainian]. 11. Onboard with marine scrubbers - resilient solutions for lower emissions (2020) Retrieved from:https://nickelinstitute.org/en/blog/2020%E5%B9%B4/march/onboard-with-marine-scrubbers[in English]. 12. Jafari M., GhasemiR, MehrabiY., YazdanbakhshA., &Hajibabaei M. (2012) Influence of liquid and gas flow rates on sulfuric acid mist removal from air by packed bed towerIranian Journal of Environmental Health Sciences & Engineering,Retrieved from:https://www.researchgate.net/figure/Counter-current-single-stage-packed-tower-scrubber_fig1_235390349[in English]. 13. Morrison B. Race-to-the-Top: East and Gulf Coast Ports Prepare for a Post-Panamax World (2012) Retrieved from:https://www.researchgate.net/publication/305331669_Race-to-the-Top_East_and_Gulf_Coast_Ports_Prepare_for_a_Post-Panamax_World 14. China's Arctic Course: Scientific and Practical Aspects (2017) Retrieved from: https://sinologist.com.ua/koshovyj-s-arktychnyj-kurs-kytayu-naukovyj-ta-praktychnyj-aspekt. Citations 1. Гуренко А. В., Зубов С. В. Впровадження інтелектуальних логістичних технологій в інфраструктурний комплекс морського транспорту.Економічний вісник Донбасу. 2020. № 3(61). С. 146-153, doi: 10.12958/1817-3772-2020-3(61)-146-153. 2. Сайт «Міністерство розвитку громад та територій України URL: https://mtu.gov.ua/. 26.09.2024 3. Никифорук О.І. Розвиток транспорту з метою відновлення і зростання української економіки: наукова доповідь.К.: НАН України, 2018. 200 с. 4. Бєляєва Г.Є., Пустовіт О.Г. Аналіз сутності та умов формування підприємницького потенціалу підприємств морської галузі. Розвиток методів управління та господарювання на транспорті. 2018. No 1(62). С. 106-116. 5. Мар’єнко М., Коваленко В. Штучний інтелект та відкрита наука в освіті. Фізико-математична освіта. 2023. Том 38. No 1. С. 48-53. DOI: 10.31110/2413-1571-2023-038-1-007. 6. Krenn M., Pollice R., Guo S., Aldeghi M., Cervera-Lierta A., Friederich P., Gomes G., Hase F., Jinich A., Nigam A., Yao Z and Aspuru-Guzik A. On scientific understanding with artificial intelligence. Nature Reviews Physics. 2022. 4. P. 761–769. 7. Сайт «Libelium & SmartDataSystem present solar panel monitoring kits for photovoltaic plants with LoT. Retrieved» URL: https://www.thesmartcityjournal.com/en/companies/libelium-and-smartdatasystem-present-solar-panel-monitoring-kits-that-control-photovoltaic-plants-performance-with-iot-technology. 27.09.2024. 8. Стовба T.A. Фронезіс використання штучного інтелекту у морській галузі. Наукові перспективи. 2023. № 7(37). C. 387-398. doi: 10.52058/2708-7530-2023-7(37)-387-398. 9. Сайт «Konecranes». Konecranes wins order in Rotterdam for mobile harbor crane Powered by Ecolifting. URL: https://www.konecranes.com/press-releases/konecranes-wins-order-in-rotterdam-for-mobile-harbor-crane-powered-by-ecolifting. 26.09.2024. 10. Сайт «АПК ІНФОРМ» Морська логістика: до нових викликів [Електронний ресурс].Режим доступу: https://www.apk-inform.com/uk/exclusive/topic/1500695. 28.09.2024. 11. Сайт «Nickel Institute». Onboard with marine scrubbers - resilient solutions for lower emissions. URL: https://nickelinstitute.org/en/blog/2020%E5%B9%B4/march/onboard-with-marine-scrubbers. 28.09.2024. 12. Jafari M., GhasemiR, MehrabiY., YazdanbakhshA., Hajibabaei M. Influence of liquid and gas flow rates on sulfuric acid mist removal from air by packed bed tower.Iranian Journal of Environmental Health Sciences & Engineering. URL: https://www.researchgate.net/figure/Counter-current-single-stage-packed-tower-scrubber_fig1_235390349. 28.09.2024. 13. Morrison B. Race-to-the-Top.East and Gulf Coast Ports Prepare for a Post-Panamax World. URL: https://www.researchgate.net/publication/305331669_Race-to-the-Top_East_and_Gulf_Coast_Ports_Prepare_for_a_Post-Panamax_World. 28.09.2024. 14. Сайт «Українська асоціація китаєзнавців».Арктичний курс Китаю: науковий та практичний аспект. URL: https://sinologist.com.ua/koshovyj-s-arktychnyj-kurs-kytayu-naukovyj-ta-praktychnyj-aspekt.28.09.2024. Copyright (c) 2024 Lyudmila Tarandushka, Olexandr Kravchenko, Yan Tarandushka
- 28 October 2024
- Published by Central Ukrainian National Technical University in Central Ukrainian Scientific Bulletin. Technical Sciences
- Vol. 1 (10(41))
Study of STructure of Materials Which are Formed by Evaporation off Glass Arsenic-Selenium System for Further Use in the Automotive Industry
Liudmyla Tarandushka, Professor, Doctor in Technics (Doctor of Technic Sciences), Cherkasy State Technological University, Cherkasy, Ukraine, е-mail: tarandushkal@ukr.net, ORCID ID: 0000-0002-1410-9088 Victor Kovtunenko, Associate Professor, PhD in Physical and Mathematical (Candidate of Physical and Mathematical Science), Cherkasy State Technological University, Cherkasy, Ukraine, е-mail: kovtvics@ukr.net Thin films Ar-Se systev are widely usedin optoelectronics, in the production of microchips, there fore they are activelly used in modern automotive production. Improvement of methods of obtaining films with a renewable comprosition is an urgent problem. The chemical composition of amorphous films sputter on changeable substrates at the thermal evaporation of arsenic(n)-selenium(100-n) glasses has been investigated and has been analyzed. It was received that at the stage of glass evaporation in the interval less then 39 at % of arsenic the modifications of vapor phase over substraes changes for a time and it reaches by arsenic. For glasses with n > 39 аt % the modifications enriches by selenium. These results have been analyzed? where the uneven character of application is connecting with the features of the chemical structure of arsenic(n)-selenium(n-k) glasses and their melts.
- 28 October 2024
- Published by Central Ukrainian National Technical University in Central Ukrainian Scientific Bulletin. Technical Sciences
- Vol. 1 (10(41))
Study of STructure of Materials Which are Formed by Evaporation off Glass Arsenic-Selenium System for Further Use in the Automotive Industry
Liudmyla Tarandushka, Professor, Doctor in Technics (Doctor of Technic Sciences), Cherkasy State Technological University, Cherkasy, Ukraine, е-mail: tarandushkal@ukr.net, ORCID ID: 0000-0002-1410-9088 Victor Kovtunenko, Associate Professor, PhD in Physical and Mathematical (Candidate of Physical and Mathematical Science), Cherkasy State Technological University, Cherkasy, Ukraine, е-mail: kovtvics@ukr.net Thin films Ar-Se systev are widely usedin optoelectronics, in the production of microchips, there fore they are activelly used in modern automotive production. Improvement of methods of obtaining films with a renewable comprosition is an urgent problem. The chemical composition of amorphous films sputter on changeable substrates at the thermal evaporation of arsenic(n)-selenium(100-n) glasses has been investigated and has been analyzed. It was received that at the stage of glass evaporation in the interval less then 39 at % of arsenic the modifications of vapor phase over substraes changes for a time and it reaches by arsenic. For glasses with n > 39 аt % the modifications enriches by selenium. These results have been analyzed? where the uneven character of application is connecting with the features of the chemical structure of arsenic(n)-selenium(n-k) glasses and their melts.