Ivan Tarandushka
Ivan Tarandushka has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Liudmyla Tarandushka
Cherkasy State Technological University
7 shared publications Cherkasy State Technological University
6 shared publications- Nataliia Kostian
Cherkasy State Technological University
4 shared publications Cherkasy scientific research forensic centre of MMIA of Ukraine
2 shared publicationsIhor Shlionchak
2 shared publications- Eduard Klimov
Department of Automobiles and Tractors, Kremenchuk Mykhailo Ostrohradskyi National University, 39600 Kremenchuk, Ukraine
1 shared publication
Latest Publications
- 26 May 2025
- Published by Central Ukrainian National Technical University in Central Ukrainian Scientific Bulletin. Technical Sciences
- Vol. 2 (11(42))
Development of a Paint Application System Morphological Matrix for Enable Prediction of Restoration Paint Coating Quality on Car Body Parts
Liudmyla Tarandushka, Professor., Doctor of Engineering, Head of vehicles and technology for their operation Department, Cherkasy State Technological University, Cherkasy, Ukraine, ORCID: https://orcid.org/0000-0002-1410-9088, e-mail: l.tarandushka@chdtu.edu.ua Ivan Tarandushka, Senior Lecturer of vehicles and technology for their operation Department, Cherkasy State Technological University, Cherkasy, Ukraine, ORCID: https://orcid.org/0000-0002-5182-3811, e-mail: i.tarandushka@chdtu.edu.ua Increasing the efficiency of the bodywork service by ensuring the necessary conditions for obtaining high-quality paintwork is an important component of car service systems that provide bodywork restoration services. Improving the quality of the paintwork of repaired car body parts leads to a reduction in the costs of car service systems and an increase in their operating efficiency. As a result of the analysis of technologies for restoring the paintwork of car body parts, a scheme of the surface preparation process for painting was developed, consisting of the technological process operations for restoring the paintwork. If we assume that all preparatory operations for applying the paintwork are performed qualitatively, then it is possible to describe the paintwork application system by determining its significant parameters and, based on the morphological analysis method, develop a morphological matrix describing this system. The morphological matrix of the paintwork application system consists of morphological structures and morphological features by which this system is described. The gradation of quantitative variants of morphological features was determined using the method of quantitative assessments. The combination of individual variants of all morphological features forms a new morphological structure of the paint and varnish application system. That is, the morphological matrix allows describing all existing, as well as form new, more effective structures of paint and varnish application systems. This matrix is used to predict the quality of the paint and varnish coating on body parts to be repaired, taking into account the initial parameters of the paint and varnish application system. To determine the most significant morphological features of the system, it is necessary to conduct an examination of at least 20 systems of different morphological structure and use the Farrar-Glober algorithm to determine independent parameters and select the most significant ones among them.
- 26 May 2025
- Published by Central Ukrainian National Technical University in Central Ukrainian Scientific Bulletin. Technical Sciences
- Vol. 2 (11(42))
Development of a Paint Application System Morphological Matrix for Enable Prediction of Restoration Paint Coating Quality on Car Body Parts
Liudmyla Tarandushka, Professor., Doctor of Engineering, Head of vehicles and technology for their operation Department, Cherkasy State Technological University, Cherkasy, Ukraine, ORCID: https://orcid.org/0000-0002-1410-9088, e-mail: l.tarandushka@chdtu.edu.ua Ivan Tarandushka, Senior Lecturer of vehicles and technology for their operation Department, Cherkasy State Technological University, Cherkasy, Ukraine, ORCID: https://orcid.org/0000-0002-5182-3811, e-mail: i.tarandushka@chdtu.edu.ua Increasing the efficiency of the bodywork service by ensuring the necessary conditions for obtaining high-quality paintwork is an important component of car service systems that provide bodywork restoration services. Improving the quality of the paintwork of repaired car body parts leads to a reduction in the costs of car service systems and an increase in their operating efficiency. As a result of the analysis of technologies for restoring the paintwork of car body parts, a scheme of the surface preparation process for painting was developed, consisting of the technological process operations for restoring the paintwork. If we assume that all preparatory operations for applying the paintwork are performed qualitatively, then it is possible to describe the paintwork application system by determining its significant parameters and, based on the morphological analysis method, develop a morphological matrix describing this system. The morphological matrix of the paintwork application system consists of morphological structures and morphological features by which this system is described. The gradation of quantitative variants of morphological features was determined using the method of quantitative assessments. The combination of individual variants of all morphological features forms a new morphological structure of the paint and varnish application system. That is, the morphological matrix allows describing all existing, as well as form new, more effective structures of paint and varnish application systems. This matrix is used to predict the quality of the paint and varnish coating on body parts to be repaired, taking into account the initial parameters of the paint and varnish application system. To determine the most significant morphological features of the system, it is necessary to conduct an examination of at least 20 systems of different morphological structure and use the Farrar-Glober algorithm to determine independent parameters and select the most significant ones among them.
- 25 March 2024
- Published by Central Ukrainian National Technical University in Central Ukrainian Scientific Bulletin. Technical Sciences
- Vol. 1 (9(40))
Development of the method for ensuring quality paint coating during painting and body work in car service systems
Ludmyla Tarandushka, Professor, Doctor in Technics (Doctor of Technic Sciences), Cherkasy State Technological University, Cherkasy, Ukraine, e-mail: tarandushkal@ukr.net, ORCID ID: 0000-0002-1410-9088 Ivan Tarandushka, Senior Lecturer, Cherkasy State Technological University, Cherkasy, Ukraine, e-mail: tarandushka@ukr.net, ORCID ID: 0000-0002-5182-3811 A technique has been developed that makes it possible to determine the quality of paintwork in car service systems. This technique is based on the determination of important parameters that describe the technological process of applying a paint coating. Based on the Farrar-Glober algorithm, among the 16 parameters of the system, 8 independent ones affecting the quality of the coating were singled out and their degree of importance was determined. Isolation of independent parameters contributed to the construction of an adequate model for predicting the quality of the paint coating. This makes it possible to organize competitive car service systems for the restoration of vehicle paint coatings. Thanks to the proposed methodology, it becomes possible to provide the organizational and technological structure of production with the necessary equipment and technologies. The efficiency of car service enterprises increases, costs decrease. This technique can also be used to predict the quality of the paint coating, taking into account the important factors of this process. When implementing the proposed methodology, a mathematical model was developed for determining the quality of the paint coating from the factors affecting this process. The average quadratic deviation of the model values of the quality level of the obtained paint coating from the statistical values was =0,0008, which confirms the adequacy of the model. So, it can be concluded that the obtained linear model describing the level of quality of the applied paint coating can be used to predict the quality of the paint coating, knowing the 8 input parameters of the system, namely: - lighting of the dyeing chamber; - polymerization furnace (principle of operation); – method of paint feding; – compressed air source capacity; – amount of diluent; - temperature of the applied material; - distance from the spray gun to the base; - the number of applied material layers.
- 25 March 2024
- Published by Central Ukrainian National Technical University in Central Ukrainian Scientific Bulletin. Technical Sciences
- Vol. 1 (9(40))
Development of the method for ensuring quality paint coating during painting and body work in car service systems
Ludmyla Tarandushka, Professor, Doctor in Technics (Doctor of Technic Sciences), Cherkasy State Technological University, Cherkasy, Ukraine, e-mail: tarandushkal@ukr.net, ORCID ID: 0000-0002-1410-9088 Ivan Tarandushka, Senior Lecturer, Cherkasy State Technological University, Cherkasy, Ukraine, e-mail: tarandushka@ukr.net, ORCID ID: 0000-0002-5182-3811 A technique has been developed that makes it possible to determine the quality of paintwork in car service systems. This technique is based on the determination of important parameters that describe the technological process of applying a paint coating. Based on the Farrar-Glober algorithm, among the 16 parameters of the system, 8 independent ones affecting the quality of the coating were singled out and their degree of importance was determined. Isolation of independent parameters contributed to the construction of an adequate model for predicting the quality of the paint coating. This makes it possible to organize competitive car service systems for the restoration of vehicle paint coatings. Thanks to the proposed methodology, it becomes possible to provide the organizational and technological structure of production with the necessary equipment and technologies. The efficiency of car service enterprises increases, costs decrease. This technique can also be used to predict the quality of the paint coating, taking into account the important factors of this process. When implementing the proposed methodology, a mathematical model was developed for determining the quality of the paint coating from the factors affecting this process. The average quadratic deviation of the model values of the quality level of the obtained paint coating from the statistical values was =0,0008, which confirms the adequacy of the model. So, it can be concluded that the obtained linear model describing the level of quality of the applied paint coating can be used to predict the quality of the paint coating, knowing the 8 input parameters of the system, namely: - lighting of the dyeing chamber; - polymerization furnace (principle of operation); – method of paint feding; – compressed air source capacity; – amount of diluent; - temperature of the applied material; - distance from the spray gun to the base; - the number of applied material layers.
- 27 December 2023
- Published by Central Ukrainian National Technical University in Central Ukrainian Scientific Bulletin. Technical Sciences
- Vol. 1 (8(39))
Development of the Methodology for Determining the Size of the Insurable Stock of Goods in the Transport and Logistics Chain to Increase the Competitiveness of the Enterprise
Ludmyla Tarandushka, Professor, Doctor in Technics (Doctor of Technic Sciences), Cherkasy State Technological University, Cherkasy, Ukraine, e-mail: tarandushkal@ukr.net, ORCID ID: 0000-0002-1410-9088 Ivan Tarandushka, Senior Lecturer, Cherkasy State Technological University, Cherkasy, Ukraine, e-mail: tarandushka@ukr.net, ORCID ID: 0000-0002-5182-3811 The methodology of inventory management in the transport and logistics chain was developed based on the justification of organizational decisions, the characteristics of the inventory management system in the intermediate link of the logistics chain (regional transport and distribution center), which interacts with manufacturers, consumers and carriers of goods. The proposed method of determining the size of the insurance stock in the transport and logistics chain is an alternative to traditional methods that depend only on the time of late delivery due to the fault of the carrier. This allows not only to calculate the required size of the insurance stock in the system, but also to draw conclusions about the reliability of enterprises that supply and transport goods. Analysis of the necessary level reliability of the transport and logistics chain determines the quality of logistics service and allows taking into account the well-founded characteristics of the operation of the transport and logistics chain. The results of the study are proposed to be used in the process of optimizing the functioning of the enterprise in the market of goods sales.
- 27 December 2023
- Published by Central Ukrainian National Technical University in Central Ukrainian Scientific Bulletin. Technical Sciences
- Vol. 1 (8(39))
Development of the Methodology for Determining the Size of the Insurable Stock of Goods in the Transport and Logistics Chain to Increase the Competitiveness of the Enterprise
Ludmyla Tarandushka, Professor, Doctor in Technics (Doctor of Technic Sciences), Cherkasy State Technological University, Cherkasy, Ukraine, e-mail: tarandushkal@ukr.net, ORCID ID: 0000-0002-1410-9088 Ivan Tarandushka, Senior Lecturer, Cherkasy State Technological University, Cherkasy, Ukraine, e-mail: tarandushka@ukr.net, ORCID ID: 0000-0002-5182-3811 The methodology of inventory management in the transport and logistics chain was developed based on the justification of organizational decisions, the characteristics of the inventory management system in the intermediate link of the logistics chain (regional transport and distribution center), which interacts with manufacturers, consumers and carriers of goods. The proposed method of determining the size of the insurance stock in the transport and logistics chain is an alternative to traditional methods that depend only on the time of late delivery due to the fault of the carrier. This allows not only to calculate the required size of the insurance stock in the system, but also to draw conclusions about the reliability of enterprises that supply and transport goods. Analysis of the necessary level reliability of the transport and logistics chain determines the quality of logistics service and allows taking into account the well-founded characteristics of the operation of the transport and logistics chain. The results of the study are proposed to be used in the process of optimizing the functioning of the enterprise in the market of goods sales.
- 29 December 2022
- Published by Central Ukrainian National Technical University in Central Ukrainian Scientific Bulletin. Technical Sciences
- Vol. 2 (6(37))
Method of Determining and Locating the Optimal Number of Charging Stations for Electric Transportation in Settlement
The problem of determining the optimal number and location of charging stations for electric transport within the settlement is being studied. To solve this problem, the criteria, factors and limitations of the optimal placement of charging stations were defined. Since the task included ensuring the comfortable operation of electric cars by citizens until 2025, it was necessary to forecast the number of electric cars that will be registered in the town of Cherkasy. For this, a portrait of the potential consumer was drawn up, and the potential capacity of the transport market was determined. Also, the key points of concentration of potential customers were determined, the level of charging stations for electric vehicles that will ensure their operation in the town of Cherkasy was selected, and the calculation of the optimal number of charging stations for the South-Western district of Cherkasy was performed. Since there are no regulations regarding the required number of charging stations for a certain fleet, it was proposed to adapt the regulations for gas stations by making corrections regarding the features of the technical charging process and the number of electric vehicle charges per unit of time. With the help of the method of hierarchical clustering, demand points in charging stations for electric cars were determined and a map of their location was developed for the residents of the South-Western district of Cherkasy. The cost of this project was also calculated. It can be concluded that the implementation of the project to provide charging stations for electric cars is profitable both from the point of view of material investments and from the point of view of the occupied useful area of town parking lots. The administration of Cherkasy may be interested in the implementation of this project under the terms of the city development program. This is due to the fact that the implementation of this project is expected to improve the town's environmental situation, generate profit from charging electric cars and sell new electric cars at car dealerships.
- 29 December 2022
- Published by Central Ukrainian National Technical University in Central Ukrainian Scientific Bulletin. Technical Sciences
- Vol. 2 (6(37))
Method of Determining and Locating the Optimal Number of Charging Stations for Electric Transportation in Settlement
The problem of determining the optimal number and location of charging stations for electric transport within the settlement is being studied. To solve this problem, the criteria, factors and limitations of the optimal placement of charging stations were defined. Since the task included ensuring the comfortable operation of electric cars by citizens until 2025, it was necessary to forecast the number of electric cars that will be registered in the town of Cherkasy. For this, a portrait of the potential consumer was drawn up, and the potential capacity of the transport market was determined. Also, the key points of concentration of potential customers were determined, the level of charging stations for electric vehicles that will ensure their operation in the town of Cherkasy was selected, and the calculation of the optimal number of charging stations for the South-Western district of Cherkasy was performed. Since there are no regulations regarding the required number of charging stations for a certain fleet, it was proposed to adapt the regulations for gas stations by making corrections regarding the features of the technical charging process and the number of electric vehicle charges per unit of time. With the help of the method of hierarchical clustering, demand points in charging stations for electric cars were determined and a map of their location was developed for the residents of the South-Western district of Cherkasy. The cost of this project was also calculated. It can be concluded that the implementation of the project to provide charging stations for electric cars is profitable both from the point of view of material investments and from the point of view of the occupied useful area of town parking lots. The administration of Cherkasy may be interested in the implementation of this project under the terms of the city development program. This is due to the fact that the implementation of this project is expected to improve the town's environmental situation, generate profit from charging electric cars and sell new electric cars at car dealerships.
- 26 September 2022
- Published by Central Ukrainian National Technical University in Central Ukrainian Scientific Bulletin. Technical Sciences
- Vol. 1 (6(37))
Improving the Security of Vehicle Transportation on Roads of the Cherkasy Region
The problem of ensuring the safety of movement on the Cherkasy region roads is being studied. The need to improve transportation safety and study the factors affecting it arose with the development of market-based methods of transport management, changes in the structure and management system of the transport industry of Ukraine. Such qualitative changes have led to the development in this field of new models, methods, methodologies of transportation safety management capable of comprehensively solving the problems of transportation organization, their legal, financial, and information support. In order to identify methods of improving road safety in the region, an in-depth analysis of the state of accidents in the territory of the General Directorate of the National Police in Cherkasy Region was conducted by types, causes, days of the week, time of traffic accidents, number of victims, number of dead, etc. Dangerous sections of highways were identified and an experimental study was conducted to identify the causes of traffic accidents. In the course of the experimental study, measurements were made that allow to calculate the speed of vehicles that, violating traffic rules, were overtaking on sections of highways with blind turns. From the obtained results, it can be concluded that the main causes of traffic accidents are the violation of traffic rules, which is caused by the difference in traffic speeds in the flow and the unconscious attitude of drivers to the corresponding traffic situation. As a result of the conducted research, recommendations were provided for optimizing the organization of traffic on dangerous sections of highways. Namely, it is proposed to use the methodology of experimental research on other dangerous sections of the country's highways and to install dynamic traffic signs that will allow regulating the maximum permissible speed depending on the selected factors on the relevant sections, thereby reducing the speed difference in the flow of traffic and punishing violators for exceeding the speed limit. In addition, a very important element of improving safety on the country's highways is the dissemination of information programs on compliance with traffic rules among the country's youth. The proposed method is recommended to be used to reduce the number of road accidents, and accordingly, to reduce the number of victims of road accidents in the territory of Ukraine.
- 26 September 2022
- Published by Central Ukrainian National Technical University in Central Ukrainian Scientific Bulletin. Technical Sciences
- Vol. 1 (6(37))
Improving the Security of Vehicle Transportation on Roads of the Cherkasy Region
The problem of ensuring the safety of movement on the Cherkasy region roads is being studied. The need to improve transportation safety and study the factors affecting it arose with the development of market-based methods of transport management, changes in the structure and management system of the transport industry of Ukraine. Such qualitative changes have led to the development in this field of new models, methods, methodologies of transportation safety management capable of comprehensively solving the problems of transportation organization, their legal, financial, and information support. In order to identify methods of improving road safety in the region, an in-depth analysis of the state of accidents in the territory of the General Directorate of the National Police in Cherkasy Region was conducted by types, causes, days of the week, time of traffic accidents, number of victims, number of dead, etc. Dangerous sections of highways were identified and an experimental study was conducted to identify the causes of traffic accidents. In the course of the experimental study, measurements were made that allow to calculate the speed of vehicles that, violating traffic rules, were overtaking on sections of highways with blind turns. From the obtained results, it can be concluded that the main causes of traffic accidents are the violation of traffic rules, which is caused by the difference in traffic speeds in the flow and the unconscious attitude of drivers to the corresponding traffic situation. As a result of the conducted research, recommendations were provided for optimizing the organization of traffic on dangerous sections of highways. Namely, it is proposed to use the methodology of experimental research on other dangerous sections of the country's highways and to install dynamic traffic signs that will allow regulating the maximum permissible speed depending on the selected factors on the relevant sections, thereby reducing the speed difference in the flow of traffic and punishing violators for exceeding the speed limit. In addition, a very important element of improving safety on the country's highways is the dissemination of information programs on compliance with traffic rules among the country's youth. The proposed method is recommended to be used to reduce the number of road accidents, and accordingly, to reduce the number of victims of road accidents in the territory of Ukraine.
- 30 May 2022
- Published by Central Ukrainian National Technical University in Central Ukrainian Scientific Bulletin. Technical Sciences
- Vol. 2 (5(36))
Assessment of the Quality Passenger Service by Public Transport in Cherkasy
The problem of assessing the quality of public transport services provided to the population by public transport is investigated. The quality of passenger transport services by public transport is influenced by certain factors. Many researchers have been working to identify a combination of factors that would have the most significant impact on the quality of services and by assessing which the level of quality of public transport services provided by public transport could be determined. The article identified the most important indicators that reflect the quality of transport services and proposed a method of assessing passenger service by public transport. The results of the study can be used to determine the level of quality of passenger transport services by public transport in any city and the specific results obtained in the city of Cherkasy are proposed to be used in the process of optimizing the transport network of the city.
- 30 May 2022
- Published by Central Ukrainian National Technical University in Central Ukrainian Scientific Bulletin. Technical Sciences
- Vol. 2 (5(36))
Assessment of the Quality Passenger Service by Public Transport in Cherkasy
The problem of assessing the quality of public transport services provided to the population by public transport is investigated. The quality of passenger transport services by public transport is influenced by certain factors. Many researchers have been working to identify a combination of factors that would have the most significant impact on the quality of services and by assessing which the level of quality of public transport services provided by public transport could be determined. The article identified the most important indicators that reflect the quality of transport services and proposed a method of assessing passenger service by public transport. The results of the study can be used to determine the level of quality of passenger transport services by public transport in any city and the specific results obtained in the city of Cherkasy are proposed to be used in the process of optimizing the transport network of the city.
- 30 May 2022
- Published by Central Ukrainian National Technical University in Central Ukrainian Scientific Bulletin. Technical Sciences
- Vol. 2 (5(36))
Determination of Optimal Number Vehicles for the Functioning of Carshing in Kyiv Within the Framework of Improving the Transport System
The problem of ensuring the quality of transport services provided to the population by a car-sharing firm is studied. For a formalized description of functioning process car-sharing company, information, scientific and experimental bases were used, with the help of which it became possible to solve transport problems in the conditions of constant improvement of the city's transport system. The main purpose of this study using a mathematical apparatus is to obtain the resulting indicators, which will provide recommendations for improving the level of customer service by car-sharing companies, taking into account the possible effects of certain system parameters. A mathematical model was used to conduct the study, which takes into account the main indicators that affect the determination of the optimal number of vehicles of the company to ensure a high level of customer service of the car-sharing company. In the course of the work, the most important indicators influencing the quality of transport services were identified and a method for determining the optimal number of vehicles to qualitatively meet the needs of customers of a car-sharing company was proposed. Statistical data on car-sharing needs in Kyiv were obtained on the basis of the Getmancar application. The function of exponential distribution of travel time from their number during the study period of 13 days was obtained. Necessary calculations were performed and recommendations were received to increase the fleet of car-sharing vehicles from Getmancar to 293 units. This will increase the density of vehicles in the area, thus ensuring a 100% probability of finding a free vehicle at a distance of 0.6 to 1.2 km. It is proposed to apply the obtained results in the process of optimization of the transport network of Kyiv. The proposed method is recommended to be used during the reorganization of the city transport system, urban redevelopment, forecasting the results of the transport system during the intensive development of the transport network.
- 30 May 2022
- Published by Central Ukrainian National Technical University in Central Ukrainian Scientific Bulletin. Technical Sciences
- Vol. 2 (5(36))
Determination of Optimal Number Vehicles for the Functioning of Carshing in Kyiv Within the Framework of Improving the Transport System
The problem of ensuring the quality of transport services provided to the population by a car-sharing firm is studied. For a formalized description of functioning process car-sharing company, information, scientific and experimental bases were used, with the help of which it became possible to solve transport problems in the conditions of constant improvement of the city's transport system. The main purpose of this study using a mathematical apparatus is to obtain the resulting indicators, which will provide recommendations for improving the level of customer service by car-sharing companies, taking into account the possible effects of certain system parameters. A mathematical model was used to conduct the study, which takes into account the main indicators that affect the determination of the optimal number of vehicles of the company to ensure a high level of customer service of the car-sharing company. In the course of the work, the most important indicators influencing the quality of transport services were identified and a method for determining the optimal number of vehicles to qualitatively meet the needs of customers of a car-sharing company was proposed. Statistical data on car-sharing needs in Kyiv were obtained on the basis of the Getmancar application. The function of exponential distribution of travel time from their number during the study period of 13 days was obtained. Necessary calculations were performed and recommendations were received to increase the fleet of car-sharing vehicles from Getmancar to 293 units. This will increase the density of vehicles in the area, thus ensuring a 100% probability of finding a free vehicle at a distance of 0.6 to 1.2 km. It is proposed to apply the obtained results in the process of optimization of the transport network of Kyiv. The proposed method is recommended to be used during the reorganization of the city transport system, urban redevelopment, forecasting the results of the transport system during the intensive development of the transport network.
- 30 May 2022
- Published by Central Ukrainian National Technical University in Central Ukrainian Scientific Bulletin. Technical Sciences
- Vol. 2 (5(36))
Analysis of Traffic Flows and Forecasting the intensity of Traffic of Different Types of Transport on the Example of the Road Network of Cherkasy
The study of traffic flows of different types of transport of the road network of Cherkasy on the example of st. Gagarin (microdistrict "Mytnytsia"). The authors emphasize the fact that the modern street and road network of cities, including Cherkasy, which was calculated and built earlier, based on much lower traffic, is overloaded with vehicles of various kinds. In the context of European integration, in particular the introduction of a new speed regime in populated areas, there is also an increase in vehicle delays in accommodation areas, such as unregulated pedestrian crossings or traffic lights. The results of the study are proposed to be used in the process of reorganization of the street and road network of Ukrainian cities. The developed regression models allowed to analyze the delay of vehicles depending on the intensity of pedestrians at pedestrian crossings with or without artificial inequality and with the corresponding probability to predict the intensity of traffic on Gagarin Street in Cherkasy (microdistrict "Mytnytsia").
- 30 May 2022
- Published by Central Ukrainian National Technical University in Central Ukrainian Scientific Bulletin. Technical Sciences
- Vol. 2 (5(36))
Analysis of Traffic Flows and Forecasting the intensity of Traffic of Different Types of Transport on the Example of the Road Network of Cherkasy
The study of traffic flows of different types of transport of the road network of Cherkasy on the example of st. Gagarin (microdistrict "Mytnytsia"). The authors emphasize the fact that the modern street and road network of cities, including Cherkasy, which was calculated and built earlier, based on much lower traffic, is overloaded with vehicles of various kinds. In the context of European integration, in particular the introduction of a new speed regime in populated areas, there is also an increase in vehicle delays in accommodation areas, such as unregulated pedestrian crossings or traffic lights. The results of the study are proposed to be used in the process of reorganization of the street and road network of Ukrainian cities. The developed regression models allowed to analyze the delay of vehicles depending on the intensity of pedestrians at pedestrian crossings with or without artificial inequality and with the corresponding probability to predict the intensity of traffic on Gagarin Street in Cherkasy (microdistrict "Mytnytsia").
- 1 January 2021
- Published by Central Ukrainian National Technical University in Central Ukrainian Scientific Bulletin. Technical Sciences
- No. 4(35)
Solution of the Multicriteria Problem of Optimization of the Car Service System on the Example of "ANT-AUTO-SERVICE", Cherkassy
The paper investigates the problem of determining the rational modes of operation of the car service system at the macro level in the process of solving the multicriteria problem of optimizing the technological processes of the system to achieve the maximum level of socio-economic efficiency of the car service and minimum losses of customers taking into account the characteristics and limitations of its functional elements. Mathematical dependences have been developed to calculate the efficiency function of the car service system in general, which takes into account nineteen morphological features of the system and the annual costs of customers who are consumers of the offered car service. In order to solve this problem, a mathematical formulation and implementation of the problem of nonlinear programming, multicriteria model of which takes into account constraints imposed on the seven basic parameters. A method for determining the feasibility of implementing optimization measures has been developed and a block diagram of the algorithm according to its stages has been constructed. Indicators of socio-economic efficiency before and after optimization of technological processes are determined and the criterion of expediency of realization of optimization programs on the example of specialized system of car service "ANT-AUTO-SERVICE", Cherkasy is calculated. During the calculations of the predicted values of socio-economic efficiency, the values for the previous periods were used and the optimal values of the system parameters were calculated. The results of testing indicate the feasibility of optimizing the work of this enterprise. It is projected that the annual efficiency of the specialized car service system will increase by UAH 2,486,465. The results of the study can be used in the decision-making process on the feasibility of optimizing the car service system at the macro level. Further research will focus on the formulation and implementation of mathematical models for the optimization of car service systems at the micro and meta levels.
- 1 January 2021
- Published by Central Ukrainian National Technical University in Central Ukrainian Scientific Bulletin. Technical Sciences
- No. 4(35)
Solution of the Multicriteria Problem of Optimization of the Car Service System on the Example of "ANT-AUTO-SERVICE", Cherkassy
The paper investigates the problem of determining the rational modes of operation of the car service system at the macro level in the process of solving the multicriteria problem of optimizing the technological processes of the system to achieve the maximum level of socio-economic efficiency of the car service and minimum losses of customers taking into account the characteristics and limitations of its functional elements. Mathematical dependences have been developed to calculate the efficiency function of the car service system in general, which takes into account nineteen morphological features of the system and the annual costs of customers who are consumers of the offered car service. In order to solve this problem, a mathematical formulation and implementation of the problem of nonlinear programming, multicriteria model of which takes into account constraints imposed on the seven basic parameters. A method for determining the feasibility of implementing optimization measures has been developed and a block diagram of the algorithm according to its stages has been constructed. Indicators of socio-economic efficiency before and after optimization of technological processes are determined and the criterion of expediency of realization of optimization programs on the example of specialized system of car service "ANT-AUTO-SERVICE", Cherkasy is calculated. During the calculations of the predicted values of socio-economic efficiency, the values for the previous periods were used and the optimal values of the system parameters were calculated. The results of testing indicate the feasibility of optimizing the work of this enterprise. It is projected that the annual efficiency of the specialized car service system will increase by UAH 2,486,465. The results of the study can be used in the decision-making process on the feasibility of optimizing the car service system at the macro level. Further research will focus on the formulation and implementation of mathematical models for the optimization of car service systems at the micro and meta levels.