OMOleksandr Mozhaiev

Oleksandr Mozhaiev

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Oleksandr Mozhaiev has a total of 131 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Devising a method for dynamic load redistribution among SDN controllers in the fog layer of a mobile high-density internet of things

    by Heorhii Kuchuk, Oleksandr Mozhaiev, Mykhailo Mozhaiev, Elshan Hashimov, Inna Khavina, Yurii Gnusov, Yurii Onishchenko, Yurii Horelov, Viktor Voronin

    This study investigates the process that manages load on software-defined networks (SDN) controllers in the fog layer of the mobile high-density Internet of Things. The work considers SDN core controllers that handle OpenFlow switches located on mobile fog devices. The task addressed is to improve the efficiency of the ecosystem by reducing the load imbalance in SDN controllers and network latency. The integration of software-defined networks allows for flexible centralized traffic management, but SDN controllers become a bottleneck and are subject to load imbalance. This study proposes an architecture for the mobile high-density Internet of Things ecosystem focused on the use of SDN controllers in the fog layer. A feature of the architecture is a three-level hierarchical principle of building the SDN core. Based on this architecture, a mathematical model of the process of dynamic load balancing between SDN controllers was built. The model has made it possible to formalize the requirements for objective functions when optimizing the load balance of SDN controllers and minimizing network latency. The use of the model enabled devising a method for dynamic load redistribution on SDN core controllers. The main difference of the method is the use of a modified dung beetle optimization (DBO) algorithm with dynamic adjustment of the fitness function weights. The application of the DBO algorithm has made it possible to reduce the load dispersion in controllers by up to 30% compared to the classical genetic algorithm. The final solution is generated approximately 40% faster while the average query processing delay is reduced by 20%

  • Open Access

    Design of a hybrid information security management system based on artificial intelligence technologies

    by Oleksandr Mozhaiev, Inna Khavina, Volodymyr Strukov, Mykhailo Mozhaiev, Yurii Gnusov, Mykhailo Tsuranov

    The process of managing cybersecurity operations that include continuous monitoring, detection, analysis, and response to cyber threats, aimed at protecting the organization's digital assets, has been investigated in this study. The task addressed is to improve the efficiency and speed of automated incident response by combining deterministic pre-filtering tools with the cognitive capabilities of language models (LLMs). In the course of the research, an architecture of a multi-agent information security management system (MAS-ISM) has been designed, which operates on the basis of decentralized coalition auctions and a hybrid risk analysis subsystem (Sandwich Engine) for express search of incidents in system event logs for automated generation of expert reports in the state language using the generation technology supplemented by Retrieval-Augmented Generation (RAG) and LLM search. The solution to the tasks of obtaining technical cybersecurity reports in the state language and recommendations for further decision-making by the analyst has been shown. The main difference of the hybrid risk assessment system from existing ones is the use of deterministic retrospective session isolation, which made it possible to ensure data confidentiality, automatic expert description of the current state of cybersecurity in the national language, and the compilation of recommendations for analysts. The research results are attributed to the combined use of AI methods: RAG technology, deterministic retrospective session isolation, and LLM. The total time for analyzing one complex incident and forming a structured expert SOC report in the state language was reduced to 12 seconds (compared to 15–45 minutes under traditional manual analysis), while guaranteeing the confidentiality of critical data from leakage into the public cloud circuit

  • INTELLIGENT DECISION SUPPORT SYSTEMS IN CYBERSECURITY: FROM FUZZY LOGIC TO LLM AGENTS

    by Inna Khavina, Vyacheslav Limarenko, Yurii Hnusov, Oleksandr Mozhaev, Mykhailo Tsuranov

    The monograph presents a holistic scientific concept of intelligent cybersecurity management at the enterprise level. The mathematical apparatus of hierarchical structuring of security parameters and strategic selection of protection systems using the analysis of hierarchies (AHI) method by T. Saati is highlighted. The development of decision support systems (DSS) based on the Mamdani fuzzy inference algorithm in the MATLAB environment is described in detail. Decentralized multi-agent systems built on the basis of the cooperative problem solving (CPS) model and optimized by auction algorithms for task distribution based on the “regret” criterion are considered. Special attention is paid to the integration of autonomous artificial intelligence agents and the development of corporate search-augmented generation (Agentic RAG) systems for proactive detection of zero-day threats and anomalous user behavior. The publication is intended for scientists, cybersecurity and information protection specialists, developers of intelligent systems, as well as graduate students and senior students in relevant specialties.

  • Open Access

    Devising a method for managing computing resources in a fog layer of the mobile high-density internet of things

    by Heorhii Kuchuk, Oleksandr Mozhaiev, Serhii Tiulieniev, Mykhailo Mozhaiev, Nina Kuchuk, Pavlo Khorobrykh, Yurii Gnusov, Yurii Horelov, Vitalii Svitlychnyi, Oleksandr Bilyk

    This study considers a process that manages the distribution of computing resources in the fog layer of the mobile high-density Internet of Things. The task addressed is to reduce the load imbalance of fog servers by devising a method for controlling computing resources in the fog layer when processing information flows. Information flows are formed by intelligent gateways of the mobile high-density Internet of Things, which receive data from the boundary layer. In the process of research, a mathematical model for the process of controlling computing resources in the fog layer was built. Its main difference from existing ones is a module hierarchical structure according to the basic levels of decision-making when managing computing resources. When constructing the model, the principle of process decomposition into adjacent time intervals was used. Its application made it possible to carry out local optimization of the process of managing computing resources in short time intervals. The mathematical model has made it possible to devise a method for controlling computing resources in the fog layer. The main difference of this method from existing ones is that the process optimization is carried out according to the area of the relative deviation from the balanced load in the time interval under study. In addition, a two-stage algorithm for distributing tasks of free fog devices across fog layer servers is also used. That made it possible to reduce the time for finding an approximate solution for distributing computing resources of fog servers by up to 50%. The research results can be attributed to the combined use of the simulated annealing algorithm and the genetic algorithm. The method is effective when the load on the fog layer is from 20% to 70% of the maximum possible load

  • Open Access

    Devising a method for energy-efficient control over a data transmission process across the mobile high-density internet of things

    by Heorhii Kuchuk, Oleksandr Mozhaiev, Serhii Tiulieniev, Mykhailo Mozhaiev, Nina Kuchuk, Andrii Lubentsov, Yurii Onishchenko, Yurii Gnusov, Olha Brendel, Viktoriia Roh

    This study’s object is the process that controls data transmission across the mobile high-density Internet of Things. The task addressed is to reduce energy consumption when transmitting mobile IoT transactions to fog gateways was by devising a method for energy-efficient data transmission control. To this end, it was proposed to optimize the distribution of active mobile devices across the fog layer gateways. In the process of research, the architecture of the data transmission subsystem between the boundary and fog layers of the Internet of Things was formed. During the development, an intermediate level of support infrastructure was selected – Communication Layer. That has made it possible to build a mathematical model of the data transmission process control process. The main difference of this model from existing ones is a significant acceleration of calculations when finding a Pareto-optimal solution. To this end, the method of successive concessions was used. It has made it possible to solve a three-criteria optimization problem with objective functions ordered by significance. The mathematical model has made it possible to devise a method for energy-efficient control over the data transmission process across the mobile high-density Internet of Things. The main difference of this method from existing ones is the optimization of the process simultaneously according to three criteria: energy efficiency, priority, and time. In this case, preference is given to the criterion of energy efficiency of data transmission by mobile IoT devices. That has made it possible to significantly reduce the time of searching for a Pareto-optimal solution when transmitting transactions to a cloud data processing center. The research results are attributed to the application of the successive concessions method together with the ant colony algorithm with a limited number of iterations. The method proves effective when concessions on the energy resource of mobile devices are from 5 to 15%.


  • Open Access

    Devising a method for increasing data transmission speed in monitoring systems based on the mobile high-density internet of things

    by Heorhii Kuchuk, Oleksandr Mozhaiev, Serhii Tiulieniev, Mykhailo Mozhaiev, Nina Kuchuk, Liliia Tymoshchyk, Andrii Lubentsov, Yurii Onishchenko, Yurii Gnusov, Mykhailo Tsuranov

    The object of this study is the process that improves the efficiency of data transmission in monitoring systems that arrive from low-power devices within the mobile high-density Internet of Things. The task addressed was to reduce the average delay time of information transmission through the transmitting station of the monitoring system gateway. To this end, it was proposed to improve the multiple output procedure and use the technique for building temporary dynamic clusters of dependent sources. During the research, a model of a monitoring system with multiple node outputs was built. Its process involved the procedure for constructing a temporary subset of active devices dependent on data. That made it possible to reduce the redundancy of data coming to the monitoring system gateway. An approach has been proposed for finding the values of the upper and lower limits of the average data transmission delay. The approach is based on simplifying calculations by switching to a one-dimensional Markov chain. The use of a uniform distribution of active subscribers has made it possible to find an analytical expression for the upper limit of the average delay. A feature of the lower bound calculation process is the introduction of a fixed division of the receiving zone of the transmitting station into equal sectors. The algorithm developed for multiple node output is aimed at reducing the average data transmission delay with a limited number of subscribers. A feature of the method is the limitation of the number of transitions when forming a stationary distribution of the Markov chain. As a result of using the method, the average delay is reduced and the speed of data transmission increases. Studies of the proposed method have shown that the speed of data transmission increases in comparison with existing methods from 5 to 50%. The research results are attributed to the use of the procedure of multiple subscriber output


  • Open Access

    Devising a method for stabilizing control over a load on a cluster gateway in the internet of things edge layer

    by Heorhii Kuchuk, Oleksandr Mozhaiev, Serhii Tiulieniev, Mykhailo Mozhaiev, Nina Kuchuk, Liliia Tymoshchyk, Andrii Lubentsov, Yurii Gnusov, Sergii Klivets, Alexander Kuleshov

    The object of this study is the process of managing overload at the boundary layer of the geographically distributed Internet of Things. The task addressed is reducing the number of losses of information packets of the geographically distributed Internet of Things arriving at the boundary layer gateway. For this purpose, it was proposed to use fast temporal horizontal scaling and stabilizing control over the load formed in the gateway buffer. In the process of conducting research, a temporal horizontal scaling algorithm was developed for the boundary layer cluster gateway. The evolutionary Firefly Algorithm with a fitness function based on the Lorenz function was used in the development. This made it possible to speed up the search for a cluster node for operational temporal scaling of the gateway for the period of gateway buffer overload. The standard algorithm for intelligent queue management has been modified. The modification is based on the proposed method for stabilizing load control over the boundary layer cluster gateway of the geographically distributed Internet of Things. The method takes into account the features of the boundary layer architecture. The proposed method made it possible, in case of reaching the upper threshold of the queue, to scale the gateway until its buffer is filled. As a result, the number of information packet losses arriving at the boundary layer gateway was reduced. Studies of the proposed method showed that the number of information packet losses is reduced compared to existing methods. The research results can be explained by the use of temporary horizontal scaling of the gateway and fixing the thresholds of the information packet queue buffer. The method is effective at an average load level on the cluster gateway from 0.2 to 1.2


  • Open Access

    Devising a method for forming a stable mobile cluster of the internet of things fog layer

    by Heorhii Kuchuk, Oleksandr Mozhaiev, Serhii Tiulieniev, Mykhailo Mozhaiev, Nina Kuchuk, Liliia Tymoshchyk, Yurii Onishchenko, Volodymyr Tulupov, Tetiana Bykova, Viktoriia Roh

    The object of this study is the process of clustering the fog layer of the Internet of Things (IoT) with high and ultra-high density. The task to increase the stability of mobile components in the fog layer has been solved by modifying the clustering method. In the process of conducting research, an approach was devised to form the architecture of the mobile component in the fog layer of the IoT. The development took into account the decentralization of the fog layer and the specific features of mobile IoT devices. This has made it possible to propose a four-level architecture, which, unlike the standard one, contains separate mobile clusters at the lower level of fog devices. A model of a mobile cluster of the fog layer has been proposed, which takes into account the randomness of the mobile IoT devices movement and is based on the Thomas point process. Unlike existing models, it takes into account both spatial and stability indicators of mobile cluster components. This model has made it possible to modify the standard FOREL clustering algorithm. The modification was carried out by introducing weight coefficients when finding the position of the center of the mobile cluster. The proposed method increases the stability of a mobile cluster of the IoT fog layer with high and ultra-high density. Studies of the proposed method have shown that with an increase in the average relative deviation of IoT devices from the planned movement, the stability of the mobile cluster structure increases. The research results can be explained by the approach of the center of the mobile cluster to its most unstable components. The proposed method could be used in the clustering of the IoT fog layer with mobile components. The method is effective when the average deviation of the movement of IoT mobile devices from the planned movement is no more than 20 % of the cluster radius


  • Open Access

    Design of a decision support system to form optimal technological processes for parts machining based on artificial intelligence methods

    by Viacheslav Lymarenko, Oleksandr Mozhaiev, Inna Khavina, Serhii Tiulieniev, Mykhailo Mozhaiev, Yurii Onishchenko, Yurii Gnusov, Mikhail Tsuranov, Volodymyr Homon

    The object of this study is the process of designing a decision support system for automating the formation of technological processes (TPs) for machining parts of high-precision equipment for the aviation industry. The task of improving the efficiency of the optimization of the process of mechanical processing of parts through the use of a decision support system (DSS) and artificial intelligence methods, which, unlike known analytical approaches, allow describing processes and phenomena that do not have strict formalization, has been solved. DSS consists of three subsystems. The first is an information subsystem for the automated formation of the structure in the technological process of machining parts of high-precision equipment. The second is an information subsystem for optimizing parameters of TP operations by cutting, taking into account the accumulation of tool wear. The third is a subsystem of control and adjustment of operating parameters. In the process of conducting research, an approach was devised for designing optimal technological processes to machine parts of high-precision equipment. The task of designing the structure of technological processes was solved using production rules. The task of determining the optimal parameters of turning and milling operations was solved in a multi-criteria statement. The following objective functions were used: cost of the operation, specific energy consumption for the operation, and productivity of the operation. At the same time, the wear of the tool accumulated over time was taken into account. The solution was obtained by searching for the Pareto-optimal solution using genetic algorithms and artificial neural networks. As a result of the work of DSS, an optimal technological process for machining parts of high-precision equipment for the aviation industry was formed, which made it possible to reduce the production time of one part by 5 % and reduce the total cost of production of the part by 14 %


  • Open Access

    Devising a method for the virtual clustering of the Internet of Things edge environment

    by Heorhii Kuchuk, Oleksandr Mozhaiev, Nina Kuchuk, Serhii Tiulieniev, Mykhailo Mozhaiev, Yurii Gnusov, Mykhailo Tsuranov, Tetiana Bykova, Sergii Klivets, Alexander Kuleshov

    The object of research is the process of load distribution in the edge environment of the Internet of Things. The task to improve the efficiency of the functioning of the network of computing devices in the Internet of Things edge environment has been solved. Free resources of heterogeneous single-board computers were used to this end. In the process of conducting research, an approach to the construction of an architecture for a virtual cluster of computers with limited resources was devised. The design took into account specific features of the edge environment on the Internet of Things. This has made it possible to propose a four-layer architecture instead of the standard seven-layer architecture of IoT sensor information processing device networks. Stages in the virtual cluster construction in the edge environment on the Internet of Things were also defined. A three-stage procedure to form a virtual cluster was justified. This procedure made it possible to devise a method for the virtual clustering in the Internet of Things edge environment based on the proposed virtual cluster architecture. The proposed method for building a virtual cluster in the Internet of Things edge environment was investigated. With a small network load, a virtual cluster has no advantage over a classic cluster. But with the growth of the network load, the virtual cluster prevails over the classic cluster in total performance; the advantage in total performance can exceed 10 %. It was also proven that for a heterogeneous environment, performance changes at full network load significantly depend on the number of virtual node groups. The research results on the method for building a virtual cluster in the Internet of Things edge environment can be explained by improving the balance of the network load at virtual clustering Об’єктом дослідження є процес розподілу навантаження у граничному середовищі Інтернету речей. Вирішене завдання підвищення ефективності функціонування мережі обчислювальних пристроїв граничного середовища Інтернету речей. Для цього були задіяні вільні ресурси гетерогенних одноплатних комп’ютерів. В процесі проведення досліджень розроблений підхід до формування архітектури для віртуального кластера комп’ютерів з обмеженими ресурсами. При розробці враховувались специфічні особливості граничного середовища Інтернету речей. Це дозволило запропонувати чотирирівневу архітектуру замість стандартної семирівневої архітектури мереж пристроїв обробки інформації датчиків Інтернету речей. Також визначені етапи формування віртуального кластера у граничному середовищі Інтернету речей. Обґрунтована трьохетапна процедура формування віртуального кластера. Дана процедура дозволила розробити метод віртуальної кластеризації граничного середовища Інтернету речей на базі запропонованої архітектури віртуального кластера. Досліджений запропонований метод побудови віртуального кластера граничного середовища Інтернету речей. При невеликій завантаженості мережі віртуальний кластер не має переваги над класичним кластером. Але при зростанні завантаженості мережі віртуальний кластер переважає класичний кластер за сумарною продуктивністю, перевага за сумарною продуктивністю може перевищувати 10 %. Також доведено, що для гетерогенного середовища зміни продуктивності при повному завантаженні мережі суттєво залежать від кількості віртуальних груп вузлів. Отримані результати дослідження метода побудови віртуального кластера граничного середовища Інтернету речей можна пояснити підвищенням збалансованості навантаження мережі при віртуальній кластеризації