Yurii Onishchenko
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yurii Onishchenko has a total of 37 co-authors. Here are the top co-authors by number of shared publications:
- Yurii Gnusov
Kharkiv National University of Internal Affairs
7 shared publications - Mykhailo Mozhaiev
Kharkiv National University of Radioelectronics
6 shared publications - Oleksandr Mozhaiev
Kharkiv National University of Internal Affairs
6 shared publications - Heorhii Kuchuk
National Technical University "Kharkiv Polytechnic Institute
5 shared publications - Serhii Tiulieniev
Scientific Research Center for Forensic Expertise in the Field of Information Technologies and Intellectual Property of the Ministry of Justice of Ukraine
5 shared publications - Nina Kuchuk
National Technical University “Kharkiv Polytechnic Institute
4 shared publications
Latest Publications
- Open Access
- 22 October 2026
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 5 (4 (143)) , 46-57
Devising a method for dynamic load redistribution among SDN controllers in the fog layer of a mobile high-density internet of things
This study investigates the process that manages load on software-defined networks (SDN) controllers in the fog layer of the mobile high-density Internet of Things. The work considers SDN core controllers that handle OpenFlow switches located on mobile fog devices. The task addressed is to improve the efficiency of the ecosystem by reducing the load imbalance in SDN controllers and network latency. The integration of software-defined networks allows for flexible centralized traffic management, but SDN controllers become a bottleneck and are subject to load imbalance. This study proposes an architecture for the mobile high-density Internet of Things ecosystem focused on the use of SDN controllers in the fog layer. A feature of the architecture is a three-level hierarchical principle of building the SDN core. Based on this architecture, a mathematical model of the process of dynamic load balancing between SDN controllers was built. The model has made it possible to formalize the requirements for objective functions when optimizing the load balance of SDN controllers and minimizing network latency. The use of the model enabled devising a method for dynamic load redistribution on SDN core controllers. The main difference of the method is the use of a modified dung beetle optimization (DBO) algorithm with dynamic adjustment of the fitness function weights. The application of the DBO algorithm has made it possible to reduce the load dispersion in controllers by up to 30% compared to the classical genetic algorithm. The final solution is generated approximately 40% faster while the average query processing delay is reduced by 20%
- 22 October 2026
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 5 (4 (143)) , 46-57
Open AccessDevising a method for dynamic load redistribution among SDN controllers in the fog layer of a mobile high-density internet of things
This study investigates the process that manages load on software-defined networks (SDN) controllers in the fog layer of the mobile high-density Internet of Things. The work considers SDN core controllers that handle OpenFlow switches located on mobile fog devices. The task addressed is to improve the efficiency of the ecosystem by reducing the load imbalance in SDN controllers and network latency. The integration of software-defined networks allows for flexible centralized traffic management, but SDN controllers become a bottleneck and are subject to load imbalance. This study proposes an architecture for the mobile high-density Internet of Things ecosystem focused on the use of SDN controllers in the fog layer. A feature of the architecture is a three-level hierarchical principle of building the SDN core. Based on this architecture, a mathematical model of the process of dynamic load balancing between SDN controllers was built. The model has made it possible to formalize the requirements for objective functions when optimizing the load balance of SDN controllers and minimizing network latency. The use of the model enabled devising a method for dynamic load redistribution on SDN core controllers. The main difference of the method is the use of a modified dung beetle optimization (DBO) algorithm with dynamic adjustment of the fitness function weights. The application of the DBO algorithm has made it possible to reduce the load dispersion in controllers by up to 30% compared to the classical genetic algorithm. The final solution is generated approximately 40% faster while the average query processing delay is reduced by 20%
- Open Access
- 30 August 2025
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 4 (4 (136)) , 46-57
Devising a method for energy-efficient control over a data transmission process across the mobile high-density internet of things
This study’s object is the process that controls data transmission across the mobile high-density Internet of Things. The task addressed is to reduce energy consumption when transmitting mobile IoT transactions to fog gateways was by devising a method for energy-efficient data transmission control. To this end, it was proposed to optimize the distribution of active mobile devices across the fog layer gateways. In the process of research, the architecture of the data transmission subsystem between the boundary and fog layers of the Internet of Things was formed. During the development, an intermediate level of support infrastructure was selected – Communication Layer. That has made it possible to build a mathematical model of the data transmission process control process. The main difference of this model from existing ones is a significant acceleration of calculations when finding a Pareto-optimal solution. To this end, the method of successive concessions was used. It has made it possible to solve a three-criteria optimization problem with objective functions ordered by significance. The mathematical model has made it possible to devise a method for energy-efficient control over the data transmission process across the mobile high-density Internet of Things. The main difference of this method from existing ones is the optimization of the process simultaneously according to three criteria: energy efficiency, priority, and time. In this case, preference is given to the criterion of energy efficiency of data transmission by mobile IoT devices. That has made it possible to significantly reduce the time of searching for a Pareto-optimal solution when transmitting transactions to a cloud data processing center. The research results are attributed to the application of the successive concessions method together with the ant colony algorithm with a limited number of iterations. The method proves effective when concessions on the energy resource of mobile devices are from 5 to 15%.
- 30 August 2025
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 4 (4 (136)) , 46-57
Open AccessDevising a method for energy-efficient control over a data transmission process across the mobile high-density internet of things
This study’s object is the process that controls data transmission across the mobile high-density Internet of Things. The task addressed is to reduce energy consumption when transmitting mobile IoT transactions to fog gateways was by devising a method for energy-efficient data transmission control. To this end, it was proposed to optimize the distribution of active mobile devices across the fog layer gateways. In the process of research, the architecture of the data transmission subsystem between the boundary and fog layers of the Internet of Things was formed. During the development, an intermediate level of support infrastructure was selected – Communication Layer. That has made it possible to build a mathematical model of the data transmission process control process. The main difference of this model from existing ones is a significant acceleration of calculations when finding a Pareto-optimal solution. To this end, the method of successive concessions was used. It has made it possible to solve a three-criteria optimization problem with objective functions ordered by significance. The mathematical model has made it possible to devise a method for energy-efficient control over the data transmission process across the mobile high-density Internet of Things. The main difference of this method from existing ones is the optimization of the process simultaneously according to three criteria: energy efficiency, priority, and time. In this case, preference is given to the criterion of energy efficiency of data transmission by mobile IoT devices. That has made it possible to significantly reduce the time of searching for a Pareto-optimal solution when transmitting transactions to a cloud data processing center. The research results are attributed to the application of the successive concessions method together with the ant colony algorithm with a limited number of iterations. The method proves effective when concessions on the energy resource of mobile devices are from 5 to 15%.
- Open Access
- 25 June 2025
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 3 (4 (135)) , 52-61
Devising a method for increasing data transmission speed in monitoring systems based on the mobile high-density internet of things
The object of this study is the process that improves the efficiency of data transmission in monitoring systems that arrive from low-power devices within the mobile high-density Internet of Things. The task addressed was to reduce the average delay time of information transmission through the transmitting station of the monitoring system gateway. To this end, it was proposed to improve the multiple output procedure and use the technique for building temporary dynamic clusters of dependent sources. During the research, a model of a monitoring system with multiple node outputs was built. Its process involved the procedure for constructing a temporary subset of active devices dependent on data. That made it possible to reduce the redundancy of data coming to the monitoring system gateway. An approach has been proposed for finding the values of the upper and lower limits of the average data transmission delay. The approach is based on simplifying calculations by switching to a one-dimensional Markov chain. The use of a uniform distribution of active subscribers has made it possible to find an analytical expression for the upper limit of the average delay. A feature of the lower bound calculation process is the introduction of a fixed division of the receiving zone of the transmitting station into equal sectors. The algorithm developed for multiple node output is aimed at reducing the average data transmission delay with a limited number of subscribers. A feature of the method is the limitation of the number of transitions when forming a stationary distribution of the Markov chain. As a result of using the method, the average delay is reduced and the speed of data transmission increases. Studies of the proposed method have shown that the speed of data transmission increases in comparison with existing methods from 5 to 50%. The research results are attributed to the use of the procedure of multiple subscriber output
- 25 June 2025
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 3 (4 (135)) , 52-61
Open AccessDevising a method for increasing data transmission speed in monitoring systems based on the mobile high-density internet of things
The object of this study is the process that improves the efficiency of data transmission in monitoring systems that arrive from low-power devices within the mobile high-density Internet of Things. The task addressed was to reduce the average delay time of information transmission through the transmitting station of the monitoring system gateway. To this end, it was proposed to improve the multiple output procedure and use the technique for building temporary dynamic clusters of dependent sources. During the research, a model of a monitoring system with multiple node outputs was built. Its process involved the procedure for constructing a temporary subset of active devices dependent on data. That made it possible to reduce the redundancy of data coming to the monitoring system gateway. An approach has been proposed for finding the values of the upper and lower limits of the average data transmission delay. The approach is based on simplifying calculations by switching to a one-dimensional Markov chain. The use of a uniform distribution of active subscribers has made it possible to find an analytical expression for the upper limit of the average delay. A feature of the lower bound calculation process is the introduction of a fixed division of the receiving zone of the transmitting station into equal sectors. The algorithm developed for multiple node output is aimed at reducing the average data transmission delay with a limited number of subscribers. A feature of the method is the limitation of the number of transitions when forming a stationary distribution of the Markov chain. As a result of using the method, the average delay is reduced and the speed of data transmission increases. Studies of the proposed method have shown that the speed of data transmission increases in comparison with existing methods from 5 to 50%. The research results are attributed to the use of the procedure of multiple subscriber output
- Open Access
- 24 February 2025
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 1 (4 (133)) , 6-14
Devising a method for forming a stable mobile cluster of the internet of things fog layer
The object of this study is the process of clustering the fog layer of the Internet of Things (IoT) with high and ultra-high density. The task to increase the stability of mobile components in the fog layer has been solved by modifying the clustering method. In the process of conducting research, an approach was devised to form the architecture of the mobile component in the fog layer of the IoT. The development took into account the decentralization of the fog layer and the specific features of mobile IoT devices. This has made it possible to propose a four-level architecture, which, unlike the standard one, contains separate mobile clusters at the lower level of fog devices. A model of a mobile cluster of the fog layer has been proposed, which takes into account the randomness of the mobile IoT devices movement and is based on the Thomas point process. Unlike existing models, it takes into account both spatial and stability indicators of mobile cluster components. This model has made it possible to modify the standard FOREL clustering algorithm. The modification was carried out by introducing weight coefficients when finding the position of the center of the mobile cluster. The proposed method increases the stability of a mobile cluster of the IoT fog layer with high and ultra-high density. Studies of the proposed method have shown that with an increase in the average relative deviation of IoT devices from the planned movement, the stability of the mobile cluster structure increases. The research results can be explained by the approach of the center of the mobile cluster to its most unstable components. The proposed method could be used in the clustering of the IoT fog layer with mobile components. The method is effective when the average deviation of the movement of IoT mobile devices from the planned movement is no more than 20 % of the cluster radius
- 24 February 2025
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 1 (4 (133)) , 6-14
Open AccessDevising a method for forming a stable mobile cluster of the internet of things fog layer
The object of this study is the process of clustering the fog layer of the Internet of Things (IoT) with high and ultra-high density. The task to increase the stability of mobile components in the fog layer has been solved by modifying the clustering method. In the process of conducting research, an approach was devised to form the architecture of the mobile component in the fog layer of the IoT. The development took into account the decentralization of the fog layer and the specific features of mobile IoT devices. This has made it possible to propose a four-level architecture, which, unlike the standard one, contains separate mobile clusters at the lower level of fog devices. A model of a mobile cluster of the fog layer has been proposed, which takes into account the randomness of the mobile IoT devices movement and is based on the Thomas point process. Unlike existing models, it takes into account both spatial and stability indicators of mobile cluster components. This model has made it possible to modify the standard FOREL clustering algorithm. The modification was carried out by introducing weight coefficients when finding the position of the center of the mobile cluster. The proposed method increases the stability of a mobile cluster of the IoT fog layer with high and ultra-high density. Studies of the proposed method have shown that with an increase in the average relative deviation of IoT devices from the planned movement, the stability of the mobile cluster structure increases. The research results can be explained by the approach of the center of the mobile cluster to its most unstable components. The proposed method could be used in the clustering of the IoT fog layer with mobile components. The method is effective when the average deviation of the movement of IoT mobile devices from the planned movement is no more than 20 % of the cluster radius
- Open Access
- 28 June 2024
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 3 (3 (129)) , 6-15
Design of a decision support system to form optimal technological processes for parts machining based on artificial intelligence methods
The object of this study is the process of designing a decision support system for automating the formation of technological processes (TPs) for machining parts of high-precision equipment for the aviation industry. The task of improving the efficiency of the optimization of the process of mechanical processing of parts through the use of a decision support system (DSS) and artificial intelligence methods, which, unlike known analytical approaches, allow describing processes and phenomena that do not have strict formalization, has been solved. DSS consists of three subsystems. The first is an information subsystem for the automated formation of the structure in the technological process of machining parts of high-precision equipment. The second is an information subsystem for optimizing parameters of TP operations by cutting, taking into account the accumulation of tool wear. The third is a subsystem of control and adjustment of operating parameters. In the process of conducting research, an approach was devised for designing optimal technological processes to machine parts of high-precision equipment. The task of designing the structure of technological processes was solved using production rules. The task of determining the optimal parameters of turning and milling operations was solved in a multi-criteria statement. The following objective functions were used: cost of the operation, specific energy consumption for the operation, and productivity of the operation. At the same time, the wear of the tool accumulated over time was taken into account. The solution was obtained by searching for the Pareto-optimal solution using genetic algorithms and artificial neural networks. As a result of the work of DSS, an optimal technological process for machining parts of high-precision equipment for the aviation industry was formed, which made it possible to reduce the production time of one part by 5 % and reduce the total cost of production of the part by 14 %
- 28 June 2024
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 3 (3 (129)) , 6-15
Open AccessDesign of a decision support system to form optimal technological processes for parts machining based on artificial intelligence methods
The object of this study is the process of designing a decision support system for automating the formation of technological processes (TPs) for machining parts of high-precision equipment for the aviation industry. The task of improving the efficiency of the optimization of the process of mechanical processing of parts through the use of a decision support system (DSS) and artificial intelligence methods, which, unlike known analytical approaches, allow describing processes and phenomena that do not have strict formalization, has been solved. DSS consists of three subsystems. The first is an information subsystem for the automated formation of the structure in the technological process of machining parts of high-precision equipment. The second is an information subsystem for optimizing parameters of TP operations by cutting, taking into account the accumulation of tool wear. The third is a subsystem of control and adjustment of operating parameters. In the process of conducting research, an approach was devised for designing optimal technological processes to machine parts of high-precision equipment. The task of designing the structure of technological processes was solved using production rules. The task of determining the optimal parameters of turning and milling operations was solved in a multi-criteria statement. The following objective functions were used: cost of the operation, specific energy consumption for the operation, and productivity of the operation. At the same time, the wear of the tool accumulated over time was taken into account. The solution was obtained by searching for the Pareto-optimal solution using genetic algorithms and artificial neural networks. As a result of the work of DSS, an optimal technological process for machining parts of high-precision equipment for the aviation industry was formed, which made it possible to reduce the production time of one part by 5 % and reduce the total cost of production of the part by 14 %
- Open Access
- 28 June 2024
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 3 (9 (129)) , 60-69
Using the set of informative features of a binding object to construct a decision function by the system of technical vision when localizing mobile robots
The object of this study is the process of constructing a decision function by the optical-electronic system of technical vision under the conditions of the influence of obstacles on the current image, which is formed in the process of localization of a mobile robot. The paper reports the results of solving the problem of constructing a decision function when reducing the signal-to-noise ratio of the current image by using a set of informative features for the selection of the binding object, namely, brightness, contrast, and its area. The selection of the binding object is proposed to be carried out by choosing the appropriate values of the quantization thresholds of the current image for the selected informative features, taking into account the signal-to-noise ratio, which provides the necessary probability of object selection. The dependence of the object selection probability on the selected values of the quantization thresholds was established. The use of the results could enable the construction of a unimodal decision function when localizing mobile robots on imaging surfaces with weakly pronounced brightness and contrast characteristics of objects, as well as with their small geometric dimensions. By modeling, the probability of forming a decision function was estimated depending on the degree of noise of the current images. It is shown that the application of the proposed approach allows selection of objects with a probability ranging from 0.78 to 0.99 for the values of the signal-to-noise ratio of images formed by the technical vision system under real conditions. The method to construct a decision function under the influence of interference could be implemented in information processing algorithms used in optical-electronic technical vision systems for the navigation of unmanned aerial vehicles
- 28 June 2024
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 3 (9 (129)) , 60-69
Open AccessUsing the set of informative features of a binding object to construct a decision function by the system of technical vision when localizing mobile robots
The object of this study is the process of constructing a decision function by the optical-electronic system of technical vision under the conditions of the influence of obstacles on the current image, which is formed in the process of localization of a mobile robot. The paper reports the results of solving the problem of constructing a decision function when reducing the signal-to-noise ratio of the current image by using a set of informative features for the selection of the binding object, namely, brightness, contrast, and its area. The selection of the binding object is proposed to be carried out by choosing the appropriate values of the quantization thresholds of the current image for the selected informative features, taking into account the signal-to-noise ratio, which provides the necessary probability of object selection. The dependence of the object selection probability on the selected values of the quantization thresholds was established. The use of the results could enable the construction of a unimodal decision function when localizing mobile robots on imaging surfaces with weakly pronounced brightness and contrast characteristics of objects, as well as with their small geometric dimensions. By modeling, the probability of forming a decision function was estimated depending on the degree of noise of the current images. It is shown that the application of the proposed approach allows selection of objects with a probability ranging from 0.78 to 0.99 for the values of the signal-to-noise ratio of images formed by the technical vision system under real conditions. The method to construct a decision function under the influence of interference could be implemented in information processing algorithms used in optical-electronic technical vision systems for the navigation of unmanned aerial vehicles
- 1 November 2023
- Published by Technical University of Moldova in Problems of the Regional Energetics
- No. 4(60),p. 30-42
Segmentation of Images Used in Unmanned Aerial Vehicles Navigation Systems
The paper presents the results of the study of a two-stage procedure for selecting a reference object in the current image formed by a correlation-extreme system used for autonomous navigation of unmanned aerial vehicles. The aim of this paper is to theoretically evaluate the probability of selecting low-dimensional low-contrast objects in the segmented current image according to the proposed two-stage procedure. To achieve this goal, the problem of segmentation of images of the sighting surface and subsequent selection of the reference object in the presence of heterogeneous objects differing in brightness and area characteristics is solved. The most significant result is the justification of application of two-stage procedure of selection of the reference object in the current image by brightness and area parameters using the set thresholds. The significance of the obtained results consists in establishing the dependence of the probability of correct selection of the reference object on the noise level of the current images. It is shown that the probability of correct selection of the object in the image is a function of the threshold value and can be maximised by choosing its value. This approach allows to consider the influence of various factors leading to image noise on the quality of images formed by the navigation system. It is shown that when noise distorts more than 31% of the image pixels, the proposed two-stage procedure allows to ensure the selection of the reference object in the image with a probability not lower than 0.9.
- 1 November 2023
- Published by Technical University of Moldova in Problems of the Regional Energetics
- No. 4(60),p. 30-42
Segmentation of Images Used in Unmanned Aerial Vehicles Navigation Systems
The paper presents the results of the study of a two-stage procedure for selecting a reference object in the current image formed by a correlation-extreme system used for autonomous navigation of unmanned aerial vehicles. The aim of this paper is to theoretically evaluate the probability of selecting low-dimensional low-contrast objects in the segmented current image according to the proposed two-stage procedure. To achieve this goal, the problem of segmentation of images of the sighting surface and subsequent selection of the reference object in the presence of heterogeneous objects differing in brightness and area characteristics is solved. The most significant result is the justification of application of two-stage procedure of selection of the reference object in the current image by brightness and area parameters using the set thresholds. The significance of the obtained results consists in establishing the dependence of the probability of correct selection of the reference object on the noise level of the current images. It is shown that the probability of correct selection of the object in the image is a function of the threshold value and can be maximised by choosing its value. This approach allows to consider the influence of various factors leading to image noise on the quality of images formed by the navigation system. It is shown that when noise distorts more than 31% of the image pixels, the proposed two-stage procedure allows to ensure the selection of the reference object in the image with a probability not lower than 0.9.
- Open Access
- 31 October 2023
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 5 (4 (125)) , 6-16
Construction of a model of steganographic embedding of the UAV identifier into ADS-B data
Secure data exchange in the control system of unmanned aerial vehicles (UAVs) is an important aspect for preventing unauthorized access and safety of aerial vehicles. Given the problems of automatic dependent surveillance-broadcast (ADS-B) data protection, the safety level of UAV flight tasks and air traffic in general is significantly reduced. Therefore, the protection of ADS-B data is an urgent task. The object of the study is the process of steganographic protection of ADS-B format data. A relevant problem of estimating the probabilistic time characteristics of the steganographic protection process is solved, taking into account the features of data embedding in the ADS-B format container. To solve it, a mathematical formalization of the methods of finding probabilistic-temporal characteristics of steganographic systems was carried out. A model of steganographic data transformation operations based on the Chinese remainder theorem has been built. The main difference of the model is taking into account the features of the ADS-B format data. This made it possible to formalize and evaluate the time functions of steganographic encoding and decoding of UAV identifiers with an integrated ADS-B system. A model of steganographic data transformation operations based on the finite integral ring theorem has been constructed. A list of operations performed in the developed algorithm has been compiled. This made it possible to carry out mathematical formalization of operations for complex use in the model of steganographic protection of UAV identifiers with a built-in ADS-B system. The mathematical model was studied and the estimation of the random value of the time of steganographic transformation of data, as well as the confidence interval, was performed. With the help of the reported set of models, it is possible to estimate the probability of the algorithm’s execution time falling within the given interval. The results of the calculation of probabilistic-time characteristics could be used in models of a higher level of the hierarchy
- 31 October 2023
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 5 (4 (125)) , 6-16
Open AccessConstruction of a model of steganographic embedding of the UAV identifier into ADS-B data
Secure data exchange in the control system of unmanned aerial vehicles (UAVs) is an important aspect for preventing unauthorized access and safety of aerial vehicles. Given the problems of automatic dependent surveillance-broadcast (ADS-B) data protection, the safety level of UAV flight tasks and air traffic in general is significantly reduced. Therefore, the protection of ADS-B data is an urgent task. The object of the study is the process of steganographic protection of ADS-B format data. A relevant problem of estimating the probabilistic time characteristics of the steganographic protection process is solved, taking into account the features of data embedding in the ADS-B format container. To solve it, a mathematical formalization of the methods of finding probabilistic-temporal characteristics of steganographic systems was carried out. A model of steganographic data transformation operations based on the Chinese remainder theorem has been built. The main difference of the model is taking into account the features of the ADS-B format data. This made it possible to formalize and evaluate the time functions of steganographic encoding and decoding of UAV identifiers with an integrated ADS-B system. A model of steganographic data transformation operations based on the finite integral ring theorem has been constructed. A list of operations performed in the developed algorithm has been compiled. This made it possible to carry out mathematical formalization of operations for complex use in the model of steganographic protection of UAV identifiers with a built-in ADS-B system. The mathematical model was studied and the estimation of the random value of the time of steganographic transformation of data, as well as the confidence interval, was performed. With the help of the reported set of models, it is possible to estimate the probability of the algorithm’s execution time falling within the given interval. The results of the calculation of probabilistic-time characteristics could be used in models of a higher level of the hierarchy
- Open Access
- 29 March 2023
- Published by Kharkiv National University of Internal Affairs in Law and Safety
- Vol. 88 (1) , 190-201
Cybersecurity of the municipal infrastructure
A modern city is a complex system that requires a unified systematic approach to ensuring public safety, law and order and environmental safety in the face of high levels of both man-made and natural risks. Due to the growing role of information technology in the functioning of a modern city, the threat of cyberattacks on critical municipal infrastructure has increased. The cost of such cyber-attacks can be very high, both for individual victims and for society as a whole. Cyberattacks can lead to the theft of sensitive information, data destruction or the disclosure of personal data. In addition, such attacks can lead to loss of working time and suspension of systems, which can have serious consequences for the city’s viability. The experience of other countries in protecting critical municipal infrastructure from cyber threats has been studied, analysed and summarised. The impact of the latest information technologies (such as the Internet of Things, artificial intelligence, blockchain) on the development of municipal infrastructure, the use of these technologies to protect critical infrastructure from cyberattacks, their advantages and disadvantages compared to classical security technologies have been considered. Particular attention has been paid to the problems of safe automation of modern city management processes such as automation of traffic control systems, environmental monitoring systems, financial systems, power grids, water and gas supply systems, communication systems, and control systems for wastewater treatment plants. The features of cyber attacks and the use of methods for protecting critical infrastructure in the context of hybrid warfare have been examined. Recommendations for a comprehensive increase in the level of protection of municipal critical infrastructure from cyber threats have been provided, taking into account the latest global trends in cybersecurity.
- 29 March 2023
- Published by Kharkiv National University of Internal Affairs in Law and Safety
- Vol. 88 (1) , 190-201
Open AccessCybersecurity of the municipal infrastructure
A modern city is a complex system that requires a unified systematic approach to ensuring public safety, law and order and environmental safety in the face of high levels of both man-made and natural risks. Due to the growing role of information technology in the functioning of a modern city, the threat of cyberattacks on critical municipal infrastructure has increased. The cost of such cyber-attacks can be very high, both for individual victims and for society as a whole. Cyberattacks can lead to the theft of sensitive information, data destruction or the disclosure of personal data. In addition, such attacks can lead to loss of working time and suspension of systems, which can have serious consequences for the city’s viability. The experience of other countries in protecting critical municipal infrastructure from cyber threats has been studied, analysed and summarised. The impact of the latest information technologies (such as the Internet of Things, artificial intelligence, blockchain) on the development of municipal infrastructure, the use of these technologies to protect critical infrastructure from cyberattacks, their advantages and disadvantages compared to classical security technologies have been considered. Particular attention has been paid to the problems of safe automation of modern city management processes such as automation of traffic control systems, environmental monitoring systems, financial systems, power grids, water and gas supply systems, communication systems, and control systems for wastewater treatment plants. The features of cyber attacks and the use of methods for protecting critical infrastructure in the context of hybrid warfare have been examined. Recommendations for a comprehensive increase in the level of protection of municipal critical infrastructure from cyber threats have been provided, taking into account the latest global trends in cybersecurity.