Cunjin Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Cunjin Wang has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Donghua Shen
School of Mechanical Engineering, Nanjing Institute of Technology, Nanjing, China
2 shared publications - Jiyuan Wu
School of Mechanical Engineering, Southeast University, Nanjing 211189, China
2 shared publications - Mengqian Tian
School of Mechanical Engineering, Southeast University, Nanjing 211189, China
2 shared publications - Xingsong Wang
School of Mechanical Engineering, Southeast University, Nanjing, China
2 shared publications Chun Su
School of Mechanical Engineering, Southeast University, Nanjing, China
1 shared publication- Lei Dai
School of Mechanical Engineering, Southeast University, Nanjing, China
1 shared publication
Latest Publications
- 19 October 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Biomedical Engineering
- Vol. 69 (3) , 1212-1224
Design of an Ankle Exoskeleton That Recycles Energy to Assist Propulsion During Human Walking
Objective: Active exoskeletons can handle different walking conditions, but require bulky components (e.g., motors) that need a significant source of power to do so. Purely passive exoskeletons are lightweight and energy-neutral, containing energy-recycling mechanisms that capture energy loss during negative power phases and return it as walking assistance. However, they are usually designed for stereotyped gaits (e.g., walking at fixed speed) and thus show poor adaptivity for variable conditions. This study is aimed to overcome these issues. Methods: A quasi-passive ankle exoskeleton is designed to integrate the merits of both active and passive exoskeletons, which captures the heel-strike energy loss and recycles it into propulsion. A novel, lightweight, energy-saving clutch and a heel-strike energy-storage mechanism are developed. They are coupled by a series spring that assists user's calf muscles. Six healthy subjects walked with the device on level ground and inclined surfaces to validate its functionality. Results: Level ground studies indicate that the energy-storage mechanism enhances the assistance by increasing the output torque of the exoskeleton. Reductions in metabolic cost (6.4 ± 1.3%, p < 0.05) were observed. During uphill walking, the assistance torque decreased compared with that on level ground, but it still reduced overall metabolic cost compared with baseline walking. During downhill walking, the assistance torque increased, but metabolic cost also slightly increased. Conclusion: These results demonstrate the functionality of the prototype on level ground and its limitations on inclined surfaces. Significance: The proposed device highlights the possibility of widening the potential applications of exoskeletons.
- 19 October 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Biomedical Engineering
- Vol. 69 (3) , 1212-1224
Design of an Ankle Exoskeleton That Recycles Energy to Assist Propulsion During Human Walking
Objective: Active exoskeletons can handle different walking conditions, but require bulky components (e.g., motors) that need a significant source of power to do so. Purely passive exoskeletons are lightweight and energy-neutral, containing energy-recycling mechanisms that capture energy loss during negative power phases and return it as walking assistance. However, they are usually designed for stereotyped gaits (e.g., walking at fixed speed) and thus show poor adaptivity for variable conditions. This study is aimed to overcome these issues. Methods: A quasi-passive ankle exoskeleton is designed to integrate the merits of both active and passive exoskeletons, which captures the heel-strike energy loss and recycles it into propulsion. A novel, lightweight, energy-saving clutch and a heel-strike energy-storage mechanism are developed. They are coupled by a series spring that assists user's calf muscles. Six healthy subjects walked with the device on level ground and inclined surfaces to validate its functionality. Results: Level ground studies indicate that the energy-storage mechanism enhances the assistance by increasing the output torque of the exoskeleton. Reductions in metabolic cost (6.4 ± 1.3%, p < 0.05) were observed. During uphill walking, the assistance torque decreased compared with that on level ground, but it still reduced overall metabolic cost compared with baseline walking. During downhill walking, the assistance torque increased, but metabolic cost also slightly increased. Conclusion: These results demonstrate the functionality of the prototype on level ground and its limitations on inclined surfaces. Significance: The proposed device highlights the possibility of widening the potential applications of exoskeletons.
- 30 April 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 6 (3) , 5618-5625
Designing a Soft Flat Crawling Robot With High Load Capacity
Traditional soft crawling robots have many disadvantages, including their complex structure, difficulty in manufacturing, and low load capacity. Inspired by the art form of kirigami, we opted to design a soft, flat crawling robot using only simple, fast laser cutting technology and a weaving method in this study. The robot mainly consists of two components: a piece of skin with scales and a flat balloon, which are weaved orthogonally to each other. The fully formed robot weighs only 5g, and the scales can tilt up after the balloon inflates. All the scales are distributed on one side of the robot, increasing the load capacity. The expansion of the balloon ensures that the robot becomes contract coupled. With the anisotropic friction provided by the scales, the robot can now crawl forward. This experimental work demonstrates that the crawling efficiency can be improved by choosing the appropriate pressure waveform. By shortening the period of the pressure waveform, the crawling speed can also be significantly improved. In terms of loading, the robot still has a high crawling ability when carrying a load over 400 times its weight.
- 30 April 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 6 (3) , 5618-5625
Designing a Soft Flat Crawling Robot With High Load Capacity
Traditional soft crawling robots have many disadvantages, including their complex structure, difficulty in manufacturing, and low load capacity. Inspired by the art form of kirigami, we opted to design a soft, flat crawling robot using only simple, fast laser cutting technology and a weaving method in this study. The robot mainly consists of two components: a piece of skin with scales and a flat balloon, which are weaved orthogonally to each other. The fully formed robot weighs only 5g, and the scales can tilt up after the balloon inflates. All the scales are distributed on one side of the robot, increasing the load capacity. The expansion of the balloon ensures that the robot becomes contract coupled. With the anisotropic friction provided by the scales, the robot can now crawl forward. This experimental work demonstrates that the crawling efficiency can be improved by choosing the appropriate pressure waveform. By shortening the period of the pressure waveform, the crawling speed can also be significantly improved. In terms of loading, the robot still has a high crawling ability when carrying a load over 400 times its weight.