Dawoon Jung
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Dawoon Jung has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Uikyum Kim
Department of Mechanical Engineering, Ajou University, Suwon, South Korea
5 shared publications - Dong Il Park
Korea Institute of Machinery and Materials
2 shared publications - Hyunmin Do
Korea Institute of Machinery and Materials
2 shared publications - Jinhak Hwang
Department of Mechanical Engineering, Ajou University, Suwon, South Korea
2 shared publications - Joono Cheong
Department of Control and Instrumentation Engineering, Korea University, Sejong, Republic of Korea
2 shared publications - Yooseong Lee
Department of Mechanical Engineering, Ajou University, Suwon, South Korea
2 shared publications
Latest Publications
- 16 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 10 (9) , 8890-8897
Safety-Critical Reactive Motion Using Constrained Variable Admittance Control With Dual-Type Proximity Sensors
We present a method that enhances the safety and responsiveness of robotic manipulators by employing constrained Variable Admittance Control (VAC) in conjunction with proximity perception. Recent studies have shown that manipulators equipped with proximity sensors can effectively avoid nearby obstacles in real-time. Nevertheless, unavoidable collisions remain a critical challenge in human-robot interaction (HRI). As a safety fallback, conventional reactive motion algorithms focus on obstacle avoidance but often suffer from inefficiency and disregard collision handling. Our approach integrates proximity-based pre-contact detection and VAC with QP-based motion constraints to proactively adjust impedance parameters while maintaining stable and controlled motion. By dynamically modulating stiffness and damping in response to sensor feedback, the system improves both obstacle avoidance performance and smooth contact handling. Additionally, a passivity-preserving energy tank mechanism mitigates instability arising from parameter variations, ensuring robust and adaptive behavior. Furthermore, experiments involving HRI$^{1}$ demonstrate that the proposed method ensures both safe avoidance and smooth contact handling. These results suggest that the proposed approach is highly applicable to safety-critical tasks in collaborative and industrial robotic environments.
- 16 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 10 (9) , 8890-8897
Safety-Critical Reactive Motion Using Constrained Variable Admittance Control With Dual-Type Proximity Sensors
We present a method that enhances the safety and responsiveness of robotic manipulators by employing constrained Variable Admittance Control (VAC) in conjunction with proximity perception. Recent studies have shown that manipulators equipped with proximity sensors can effectively avoid nearby obstacles in real-time. Nevertheless, unavoidable collisions remain a critical challenge in human-robot interaction (HRI). As a safety fallback, conventional reactive motion algorithms focus on obstacle avoidance but often suffer from inefficiency and disregard collision handling. Our approach integrates proximity-based pre-contact detection and VAC with QP-based motion constraints to proactively adjust impedance parameters while maintaining stable and controlled motion. By dynamically modulating stiffness and damping in response to sensor feedback, the system improves both obstacle avoidance performance and smooth contact handling. Additionally, a passivity-preserving energy tank mechanism mitigates instability arising from parameter variations, ensuring robust and adaptive behavior. Furthermore, experiments involving HRI$^{1}$ demonstrate that the proposed method ensures both safe avoidance and smooth contact handling. These results suggest that the proposed approach is highly applicable to safety-critical tasks in collaborative and industrial robotic environments.
- 24 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 30 (6) , 6951-6961
Ultracompact Multiaxis Force Sensor Based on Sensitivity Amplification Mechanism for High-Sensitivity and Capacity Measurement
In recent years, increasing research focus has been devoted to force sensing for delicate tasks in robotic applications. This has led to increased requirements for force sensors with enhanced sensitivity, broader measurement ranges, and more compact designs. In this study, a compact three-axis force sensor based on an enhanced sensitivity amplification mechanism is introduced for high sensitivity and capacity measurements. The mechanism has a C-shaped comb structure resembling the Wi-Fi symbol and the electrodes are spaced 120$\,^{\circ }$ apart for three-axis force detection. The proposed sensor consists of three main components: a top plate, a sensing part, and a bottom part. The stiffness of the deformed part of the top plate is determined by analyzing the corresponding design parameters. The Wi-Fi-shaped electrode structures are located in the sensing part, and the capacitance information of the electrodes is measured. The proposed sensor has a high resolution (2.72 mN/digit), a wide measurement range (100 N), and compactness (thickness: 6.6 mm) and offers the advantages of a low cost and ease of manufacture. The sensor performance was verified through experiments conducted in an environment combined with an actual robot manipulator.
- 24 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 30 (6) , 6951-6961
Ultracompact Multiaxis Force Sensor Based on Sensitivity Amplification Mechanism for High-Sensitivity and Capacity Measurement
In recent years, increasing research focus has been devoted to force sensing for delicate tasks in robotic applications. This has led to increased requirements for force sensors with enhanced sensitivity, broader measurement ranges, and more compact designs. In this study, a compact three-axis force sensor based on an enhanced sensitivity amplification mechanism is introduced for high sensitivity and capacity measurements. The mechanism has a C-shaped comb structure resembling the Wi-Fi symbol and the electrodes are spaced 120$\,^{\circ }$ apart for three-axis force detection. The proposed sensor consists of three main components: a top plate, a sensing part, and a bottom part. The stiffness of the deformed part of the top plate is determined by analyzing the corresponding design parameters. The Wi-Fi-shaped electrode structures are located in the sensing part, and the capacitance information of the electrodes is measured. The proposed sensor has a high resolution (2.72 mN/digit), a wide measurement range (100 N), and compactness (thickness: 6.6 mm) and offers the advantages of a low cost and ease of manufacture. The sensor performance was verified through experiments conducted in an environment combined with an actual robot manipulator.
- Open Access
- 20 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 30 (5) , 3404-3414
INDEX Gripper: Industrial Dexterous Robotic Gripper Capable of All-Orientational Object Manipulation
To advance research and industrial applications of robotic systems, enhancing object manipulation capabilities is crucial. This study introduces the INDEX gripper, an industrial dexterous robotic gripper designed to efficiently grasp objects of various shapes and precisely manipulate their orientations. The gripper features a 3-finger, 9-degree-of-freedom (DOF) linkage-driven mechanism. Its kinematic structure incorporates four four-bar linkages, enabling active 3-DOF motion for each finger. Developed through kinematic analysis, the INDEX gripper is capable of performing multiple grasping postures and accurately manipulating objects in all orientations within its grasp. Experimental results demonstrated a maximum fingertip force of 40.6 N, a payload capacity of 12.2 kg, and a repeatability error of less than 0.0244 mm. The gripper successfully grasped 15 objects of different shapes and manipulated a spherical object by 27.6 $^\circ$ along the x -axis, 34.2 $^\circ$ along the y -axis, and 98.3 $^\circ$ along the z -axis. In addition, the gripper was tested in two industrial tasks: installing a light bulb and performing a bolting process using a driver. These tasks validated the gripper's effectiveness and reliability in industrial applications.
- 20 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 30 (5) , 3404-3414
Open AccessINDEX Gripper: Industrial Dexterous Robotic Gripper Capable of All-Orientational Object Manipulation
To advance research and industrial applications of robotic systems, enhancing object manipulation capabilities is crucial. This study introduces the INDEX gripper, an industrial dexterous robotic gripper designed to efficiently grasp objects of various shapes and precisely manipulate their orientations. The gripper features a 3-finger, 9-degree-of-freedom (DOF) linkage-driven mechanism. Its kinematic structure incorporates four four-bar linkages, enabling active 3-DOF motion for each finger. Developed through kinematic analysis, the INDEX gripper is capable of performing multiple grasping postures and accurately manipulating objects in all orientations within its grasp. Experimental results demonstrated a maximum fingertip force of 40.6 N, a payload capacity of 12.2 kg, and a repeatability error of less than 0.0244 mm. The gripper successfully grasped 15 objects of different shapes and manipulated a spherical object by 27.6 $^\circ$ along the x -axis, 34.2 $^\circ$ along the y -axis, and 98.3 $^\circ$ along the z -axis. In addition, the gripper was tested in two industrial tasks: installing a light bulb and performing a bolting process using a driver. These tasks validated the gripper's effectiveness and reliability in industrial applications.
- 25 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 72 (5) , 5105-5115
Tactile Sensor Integrated Fingertip Capable of Detecting Precise Contact Force for Robotic Grippers
In this article, a tactile sensor integrated into the fingertip of a robotic gripper was proposed for delicate object manipulation. The sensor was designed to measure both the precise concentrated contact force and the distributed force, enabling in-hand manipulation of robotic grippers. The surface of the fingertip has an inverse-truncated cone-shaped structure. A sensing method was developed to detect the distributed force and precise contact force location through theoretical analysis and simulation of the kinematic relationship between the inverse-truncated cone-shaped surface and the capacitance sensor. In addition, a significant advantage of this sensor lies in its suitability for robotic integration, which is achieved by minimizing the complexity of the measurement electronics. Furthermore, it is easy to manufacture, resulting in cost-effective production. Through several experimental setups, the performance of distributed force sensing and concentrated contact force sensing was evaluated by achieving a maximum force range of 30 N, an average repeatability error of 1.28% of the FSO, and a resolution of 6 mN in that force range. Furthermore, the developed sensor was integrated into a robotic gripper, and its applicability was verified through object-grasping tests.
- 25 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 72 (5) , 5105-5115
Tactile Sensor Integrated Fingertip Capable of Detecting Precise Contact Force for Robotic Grippers
In this article, a tactile sensor integrated into the fingertip of a robotic gripper was proposed for delicate object manipulation. The sensor was designed to measure both the precise concentrated contact force and the distributed force, enabling in-hand manipulation of robotic grippers. The surface of the fingertip has an inverse-truncated cone-shaped structure. A sensing method was developed to detect the distributed force and precise contact force location through theoretical analysis and simulation of the kinematic relationship between the inverse-truncated cone-shaped surface and the capacitance sensor. In addition, a significant advantage of this sensor lies in its suitability for robotic integration, which is achieved by minimizing the complexity of the measurement electronics. Furthermore, it is easy to manufacture, resulting in cost-effective production. Through several experimental setups, the performance of distributed force sensing and concentrated contact force sensing was evaluated by achieving a maximum force range of 30 N, an average repeatability error of 1.28% of the FSO, and a resolution of 6 mN in that force range. Furthermore, the developed sensor was integrated into a robotic gripper, and its applicability was verified through object-grasping tests.
- 24 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Cognitive and Developmental Systems
- Vol. 17 (2) , 421-435
Touch Gesture Recognition-Based Physical Human–Robot Interaction for Collaborative Tasks
Human-robot collaboration (HRC) has recently attracted increasing attention as a vital component of next-generation automated manufacturing and assembly tasks, yet physical human-robot interaction (pHRI)–which is an inevitable component of collaboration–is often limited to rudimentary touches. The current paper therefore proposes a deep learning-based pHRI method that utilizes predefined types of human touch gestures as intuitive communicative signs for collaborative tasks. To this end, a touch gesture network model is first designed upon the framework of the gated recurrent unit (GRU) network, which accepts a set of ground-truth dynamic responses (energy change, generalized momentum, and external joint torque) of robot manipulators under the action of known types of touch gestures and learns to predict the five representative touch gesture types and the corresponding link toward a random touch gesture input. After training the GRU-based touch gesture model using a collected dataset of dynamic responses of a robot manipulator, a total of 35 outputs (five gesture types with seven links each) is recognized with 96.94% accuracy. The experimental results of recognition accuracy correlated with the touch gesture types, and their strength results are shown to validate the performance and disclose the characteristics of the proposed touch gesture model. An example of an IKEA chair assembly task is also presented to demonstrate a collaborative task using the proposed touch gestures. By developing the proposed pHRI method and demonstrating its applicability, we expect that this method can help position physical interaction as one of the key modalities for communication in real-world HRC applications.
- 24 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Cognitive and Developmental Systems
- Vol. 17 (2) , 421-435
Touch Gesture Recognition-Based Physical Human–Robot Interaction for Collaborative Tasks
Human-robot collaboration (HRC) has recently attracted increasing attention as a vital component of next-generation automated manufacturing and assembly tasks, yet physical human-robot interaction (pHRI)–which is an inevitable component of collaboration–is often limited to rudimentary touches. The current paper therefore proposes a deep learning-based pHRI method that utilizes predefined types of human touch gestures as intuitive communicative signs for collaborative tasks. To this end, a touch gesture network model is first designed upon the framework of the gated recurrent unit (GRU) network, which accepts a set of ground-truth dynamic responses (energy change, generalized momentum, and external joint torque) of robot manipulators under the action of known types of touch gestures and learns to predict the five representative touch gesture types and the corresponding link toward a random touch gesture input. After training the GRU-based touch gesture model using a collected dataset of dynamic responses of a robot manipulator, a total of 35 outputs (five gesture types with seven links each) is recognized with 96.94% accuracy. The experimental results of recognition accuracy correlated with the touch gesture types, and their strength results are shown to validate the performance and disclose the characteristics of the proposed touch gesture model. An example of an IKEA chair assembly task is also presented to demonstrate a collaborative task using the proposed touch gestures. By developing the proposed pHRI method and demonstrating its applicability, we expect that this method can help position physical interaction as one of the key modalities for communication in real-world HRC applications.
- 26 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 73 (00189456) , 1-10
Intuitive Six-Degree-of-Freedom Human Interface Device for Human–Robot Interaction
An intuitive communication method between humans and robots is required to realize efficient human-robot interaction (HRI). In this paper, an intuitive human interface device for robotic applications is proposed for realizing HRI. The sensing principle and design of the device are mainly described. The device can detect six-degree-of-freedom displacements with six-axis force/torque (F/T). The device mainly consists of a handle, sensing part, and base frame. The sensing part was designed with the capacitance sensing principle using an eccentric arrangement of electrodes. For ease of use, the part was designed to mechanically limit deformation by applying a blocking mechanism. All the components of the device were built-in. The device was manufactured in the form of a joystick that could be easily operated by a human. Consequently, a calibration process was conducted using deep learning to assess the performance of the developed human interface device (HID). Furthermore, using the developed HID, tasks were performed for direct interaction with a collaborative robot manipulator.
- 26 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 73 (00189456) , 1-10
Intuitive Six-Degree-of-Freedom Human Interface Device for Human–Robot Interaction
An intuitive communication method between humans and robots is required to realize efficient human-robot interaction (HRI). In this paper, an intuitive human interface device for robotic applications is proposed for realizing HRI. The sensing principle and design of the device are mainly described. The device can detect six-degree-of-freedom displacements with six-axis force/torque (F/T). The device mainly consists of a handle, sensing part, and base frame. The sensing part was designed with the capacitance sensing principle using an eccentric arrangement of electrodes. For ease of use, the part was designed to mechanically limit deformation by applying a blocking mechanism. All the components of the device were built-in. The device was manufactured in the form of a joystick that could be easily operated by a human. Consequently, a calibration process was conducted using deep learning to assess the performance of the developed human interface device (HID). Furthermore, using the developed HID, tasks were performed for direct interaction with a collaborative robot manipulator.
- 13 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Informatics
- Vol. 20 (6) , 8274-8283
Arbitrary Surface Contact Sensing Method for Physical Human–Robot Interaction
In this article, we propose an intrinsic contact force sensing method on an arbitrary surface using six-axis force/torque information. An arbitrary surface is defined by a triangle mesh structuring, and the contact sensing solution is achieved by searching the contacted triangle and predicting the actual contact point. The contact sensing algorithm is designed as a three-stage process for swift detection: 1) initial contact triangle selection, 2) solution of the contact point within the triangle plane, and 3) the implementation of a technique for switching the candidate triangle. The performances of the proposed method were evaluated in an experimental setup using a robot manipulator with a commercial force sensor to measure reference data. In addition, to show the usability of the potential robotic applications, the performance verification was performed by measuring the contact force in the complex shape of a commercial collaborative robot.
- 13 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Informatics
- Vol. 20 (6) , 8274-8283
Arbitrary Surface Contact Sensing Method for Physical Human–Robot Interaction
In this article, we propose an intrinsic contact force sensing method on an arbitrary surface using six-axis force/torque information. An arbitrary surface is defined by a triangle mesh structuring, and the contact sensing solution is achieved by searching the contacted triangle and predicting the actual contact point. The contact sensing algorithm is designed as a three-stage process for swift detection: 1) initial contact triangle selection, 2) solution of the contact point within the triangle plane, and 3) the implementation of a technique for switching the candidate triangle. The performances of the proposed method were evaluated in an experimental setup using a robot manipulator with a commercial force sensor to measure reference data. In addition, to show the usability of the potential robotic applications, the performance verification was performed by measuring the contact force in the complex shape of a commercial collaborative robot.
- Open Access
- 26 October 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 150443-150458
Robust Parameter Estimation of Robot Manipulators Using Torque Separation Technique
In this paper, we propose a robust method for estimating the parameters of robot manipulators using the torque separation technique, which was developed previously by the authors, to extract the inertial, gravitational, and frictional components from the input torques of multiple sinusoidal joint motions. The separated components of the input torque produce a set of reduced linear regression equations where the dynamic parameters of the robot manipulators appear decoupled or minimally coupled. A mathematical analysis is presented to show that the set of reduced regression equations tends to yield more robust parameter estimation than the conventional way where a large dimensional full regression equation is solved simultaneously. An iterative scheme to alleviate the possibility of parameter estimation error caused by the deviation from the assumed ideal sinusoidal motions is also proposed. Experimentation with two robot manipulators is used to verify the proposed approach and related claims. The proposed method is simple and pragmatic without requiring any specialized signal filtering and technical know-hows which numerous previous methods often demanded for explicitly or implicitly.
- 26 October 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 150443-150458
Open AccessRobust Parameter Estimation of Robot Manipulators Using Torque Separation Technique
In this paper, we propose a robust method for estimating the parameters of robot manipulators using the torque separation technique, which was developed previously by the authors, to extract the inertial, gravitational, and frictional components from the input torques of multiple sinusoidal joint motions. The separated components of the input torque produce a set of reduced linear regression equations where the dynamic parameters of the robot manipulators appear decoupled or minimally coupled. A mathematical analysis is presented to show that the set of reduced regression equations tends to yield more robust parameter estimation than the conventional way where a large dimensional full regression equation is solved simultaneously. An iterative scheme to alleviate the possibility of parameter estimation error caused by the deviation from the assumed ideal sinusoidal motions is also proposed. Experimentation with two robot manipulators is used to verify the proposed approach and related claims. The proposed method is simple and pragmatic without requiring any specialized signal filtering and technical know-hows which numerous previous methods often demanded for explicitly or implicitly.