DODmitriy Ozhigin

Dmitriy Ozhigin

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Dmitriy Ozhigin has a total of 21 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • APPLICATION OF INSAR TECHNOLOGY FOR MONITORING OF THE SHERUBAY-NURA RESERVOIR DAM

    by D.S. Ozhigin, A.U. Kubaidullina, V.V. Kazantseva, O.V. Starostina

    This paper investigates the potential of multi-temporal satellite radar interferometry for monitoring the deformation state of the Sherubay-Nura Reservoir dam. Spatial and temporal displacements of the structure were assessed using the SBAS-InSAR approach based on Sentinel-1 satellite imagery. Trihedral corner refl ectors were employed to improve the reliability of interferometric measurements by ensuring stable identifi cation of reference points. The analysis enabled the identifi cation of localized deformation zones and the assessment of displacement rates and their temporal evolution, demonstrating the eff ectiveness of integrating InSAR technology with corner refl ectors for the remote monitoring of hydraulic structures Мақалада Шерубай-Нұра су қоймасы бөгетінің деформациялық жағдайын мониторингілеуде көпуақытты спутниктік радиолокациялық интерферометрия технологиясының мүмкіндіктері қарастырылған. Sentinel-1 спутниктік түсірілімдері негізінде SBAS-InSAR әдісін қолдану арқылы құрылыстың кеңістіктік-уақыттық ығысуларына бағалау жүргізілді. Интерферометриялық өлшеулердің сенімділігін арттыру мақсатында бақылау нүктелерін тұрақты сәйкестендіруді қамтамасыз ететін үшқырлы бұрыштық шағылдырғыштар пайдаланылды. Жүргізілген талдау деформациялардың жергілікті аймақтарын анықтауға, ығысу жылдамдықтары мен олардың даму сипатын бағалауға мүмкіндік берді және гидротехникалық құрылыстардың деформациялық жағдайын қашықтан мониторингілеуде InSAR технологиясы мен бұрыштық шағылдырғыштарды бірлесіп қолданудың тиімділігін растады В статье рассмотрены возможности многовременной спутниковой радиолокационной интерферометрии для мониторинга деформационного состояния дамбы Шерубай-Нуринского водохранилища. На основе метода SBAS-InSAR по данным спутниковой съемки Sentinel-1 выполнена оценка пространственно-временных смещений сооружения. Для повышения надежности интерферометрических измерений использованы трехгранные уголковые отражатели, обеспечившие устойчивую идентификацию контрольных точек. Выполненный анализ позволил выявить локальные зоны деформаций, оценить скорости и характер развития смещений, подтвердив эффективность совместного применения технологии InSAR и уголковых отражателей для дистанционного мониторинга гидротехнических сооружений

  • REMOTE SENSING OF INDUSTRIAL STOCKPILES UNDER SNOW COVER: METHODS AND SCIENTIFIC CHALLENGES

    by D. Ozhigin, V. Dolgonosov, V. Yartseva, K. Galiullina

    Determining the volumes of stockpiled materials at industrial sites during the winter period is complicated by the presence of snow cover, which distorts surface geometry and reduces calculation accuracy. The aim of the study is to evaluate the effectiveness of remote sensing methods for mine surveying and geodetic support. The research is based on the analysis and comparison of laser scanning, satellite, radar, ground-penetrating radar, and photogrammetric methods. It is established that the integration of UAV-based photogrammetry and GNSS provides the highest efficiency. The scientific novelty lies in assessing the impact of snow cover on digital model accuracy and substantiating an integrated approach to their application Өнеркәсіптік қоймаларда сақталатын материалдардың көлемдерін анықтау қысқы кезеңде қар жамылғысының болуына байланысты күрделене түседі, себебі ол беттердің геометриясын бұрмалап, есептеулердің дәлдігін төмендетеді. Зерттеудің мақсаты -маркшейдерлік-геодезиялық қамтамасыз ету үшін қашықтықтан зондтау әдістерінің тиімділігін бағалау. Лазерлік сканерлеу, спутниктік, радиолокациялық, георадарлық және фотограмметриялық әдістер бойынша деректерді талдау және салыстыру қолданылды. Ең жоғары тиімділікті БПЛА-фотограмметриясы мен ГНСС интеграциясы қамтамасыз ететіні анықталды. Ғылыми жаңалығы қар жамылғысының цифрлық модельдердің дәлдігіне әсерін бағалауда және оларды қолданудың кешенді тәсілін негіздеуде жатыр. Қар қабаты өлшеу нәтижелерінің дәлдігіне әсер ететіні анықталды Определение объемов складируемых материалов на промышленных складах в зимний период осложняется наличием снежного покрова, искажающего геометрию поверхностей и снижающего точность расчетов. Цель исследования – оценка эффективности методов дистанционного зондирования для маркшейдерско-геодезического обеспечения. Применены анализ и сопоставление данных по лазерному сканированию, спутниковым, радиолокационным, георадарным и фотограмметрическим методам. Установлено, что наибольшую эффективность обеспечивает интеграция БПЛА-фотограмметрии и ГНСС. Научная новизна заключается в оценке влияния снежного покрова на точность цифровых моделей и обосновании комплексного подхода к их применению

  • Study of rock mass structural features based on laser scanning results

    by Abylkas Saginov Karaganda Technical University, V.F. Yartseva, D.S. Ozhigin, V.N. Dolgonosov, S.B. Ozhigina, S.G. Ozhigin

    Monitoring of pit slopes benches stability and pit walls plays the important role in the safety of mining operations. Slope stability assessment and risk management are mandatory to ensure safe and efficient operation of pits. Laser scanning technology is one of the base methods of geospatial data collecting for building of man-made objects models. Laser scanning is widely used in mining when performing survey work, measurements, monitoring, and studying structural features on the outcroppings of the rock mass. The article describes the technological chain: the collection of geospatial data, the processing of the obtained data with the construction of a terrain model and the further use of the resulting model to solve practical tasks. The choice of optimal laser scanning parameters should be based on the technological features of a pit, the technical characteristics of used equipment and scanning density required to solve the tasks. The article demonstrates the use of the obtained model for determining the necessary geometric parameters of the structural features of the rock mass to conduct kinematic analysis of potential bench failures at the object of study. Based on the results of kinematic analysis, recommendations were developed for further mining operations and potential bench failures risks reducing. The proposed technology can be used and adapted for laser scanning, followed by the construction of a terrain model at various mineral deposits to solve a wide range of tasks and ensure the safety of open-pit mining. Due to the inclusion of laser scanners in the register of measuring instruments in Kazakhstan, high reliability of measurement accuracy is ensured. The technology allows both to obtain generalized data on the sides of the quarry, as well as detailed scans of individual ledges. A significant advantage is the automatic generation of a point cloud during scanning, which reduces in-house processing.


  • Monitoring of Open Pit Conditions with Unmanned Aircraft System

    by Yartseva Vera, Dmitriy Ozhigin, Svetlana Ozhigina, Sergey Ozhigin, Victoria Kazantseva, Victor Dolgonosov

    The article presents the use of unmanned aircraft systems in an aerial photographic survey of a gold ore deposit. The author's methodology for conducting surveys is described as stepwise. A comparative study of deposit ore zones topographic map created based on instrumental measurements was also carried out, using the aerial photography data-driven digital surface model. This study was conducted at the open pit of TOO GRK Tuz (A mining company in Kazakhstan) and includes the following stages: a topographic survey of the undeveloped area, survey scale 1:1000, a vertical interval of 1.0 m; modeling of geospatial data (point cloud, orthophoto map, digital surface model); comparison of existing topographic plan with digital surface model.


  • Қарағанды қаласының өңделген аумағында жер бетінің жағдайына аэроғарыштық мониторингін жасау

    by А.к. Сатбергенова, А.а. Калдыбаев, М.б. Игемберлина, Д.с. Ожигин

    В настоящей работе приведены результаты мониторинга состояния подработанной территории района шахты им. А. Костенко на основе архивных спутниковых радарных данных Sentinel-1B. Обработка производилась в программе SNAP 134 пар радарных снимков за период с 2018 по 2021 годы. Был проведен анализ полученных интерферограмм с целью определения участков, подверженных деформациям, для выполнения аэрофотосъемки с помощью квадрокоптера DJI Mavic 2 Pro. В данной работе выполнено планирование и аэрофотосъемка выявленного участка с учетом требований к размеру, качеству и взаимному расположению фотографий. В результате обработки в программном обеспечении Agisoft Metashape получены ортофотоплан, цифровая модель местности и трехмерная модель местности Бұл жұмыста Sentinel-1B архивтік спутниктік радиолокациялық деректер негізінде А. Костенко атындағы кен орны аумағындағы жерасты жұмыстары жүргізілген жер аймағының жай-күйіне мониторинг нәтижелері көрсетілген. SNAP бағдарламасында 2018-2021 жылдар аралығында 134 жұп радиолокациялық түсірілімді өңдеу жүргізілді. DJI Mavic 2 Pro квадракоптерінің көмегімен аэрофототүсірілім жасау үшін деформацияға ұшыраған аймақтарды анықтау мақсатында алынған интерферограммаларға талдау жүргізілді. Бұл жұмыста фотосуреттердің мөлшеріне, сапасына және өзара орналасуына қойылатын талаптарды ескере отырып, анықталған учаскені жоспарлау және аэрофототүсірілім жасалды. Agisoft Metashape бағдарламалық жасақтамасында өңдеу нәтижесінде ортофотоплан, рельефтің цифрлық моделі және рельефтің үш өлшемді моделі алынды This paper presents the results of monitoring the condition of the undermined area of the A. Kostenko mine based on archived Sentinel-1B satellite radar data. The SNAP program processed 134 pairs of radar images for the period from 2018 to 2021. The analysis of the obtained interferograms was carried out to determine the areas that subject to deformations for aerial photography using the DJI Mavic 2 Pro quadcopter. In this work, planning and aerial photography of the identified area has been carried out, considering the requirements for the size, quality and relative location of photographs. As a result of processing in the Agisoft Metashape software, an orthophotoplan, a digital terrain model and a three-dimensional terrain model were obtained

  • Үйінді қоршау бөгеттерінің қалдық қоймаларының байыту фабрикаларының жай күйін аспаптық бақылаудың кешенді әдістері

    by Ф.к. Низаметдинов, Д.с. Ожигин, Р.ф. Низаметдинов, Е.в. Ситникова

    Предлагается комплексная методика инструментального контроля состояния насыпных оградительных дамб хвостохранилищ обогатительных фабрик, основанная на создании рабочего опорного обоснования в виде твердых и связующих маркшейдерских реперов, и производства специальных методик измерений с использованием роботизированного электронного тахеометра, глобальных спутниковых систем и цифровых нивелиров с инварными рейками. Именно такая поэтапная комбинация современных методов измерений позволяет на ранней стадии получить высокую точность отклонений смещения тела насыпной дамбы. Полученные высокоточные результаты инструментальных наблюдений за существующими насыпными дамбами позволяют своевременно разработать мероприятия по предупреждению и своевременной ликвидации деформаций A comprehensive methodology is proposed for instrumental monitoring of the condition of bulk protective dams of tailings dumps of processing plants, based on the creation of a working reference justification in the form of solid and binding surveying benchmarks, and the production of special measurement techniques using a robotic electronic total station, global satellite systems and digital levelers with invar rails. It is this step-by-step combination of modern measurement methods that makes it possible to obtain high accuracy of displacement deviations of the bulk dam body at an early stage. The obtained high-precision results of instrumental observations of existing bulk dams make it possible to develop timely measures for the prevention and timely elimination of deformations Қатты және байланыстырушы маркшейдерлік реперлер түріндегі жұмыс тірек негіздемесін құруға және роботтандырылған электрондық тахеометрді, ғаламдық спутниктік жүйелерді және инварналық рейкалар мен сандық нивелирлерді пайдалана отырып, өлшеудің арнайы әдістемелерін өндіруге негізделген байыту фабрикаларының қалдық қоймаларының үйінді қоршау бөгеттерінің жай-күйін аспаптық бақылаудың кешенді әдістемесі ұсынылады. Дәл осы заманауи өлшеу әдістерінің кезең-кезеңімен үйлесуі үйінді бөгетінің ауытқуларының жоғары дәлдігін ерте кезеңде алуға мүмкіндік береді. Қолданыстағы үйінді бөгеттерді аспаптық бақылаудың жоғары дәлдіктегі нәтижелері деформациялардыуақтылы алдын алуға және уақтылы жою жөніндегі іс-шараларды әзірлеуге мүмкіндік береді

  • Ways of Rare Earth Elements Migration and Transportation to the coals of the Shubarkol Deposit

    by Abylkas Saginov Karaganda Technical University, G.G. Blyalova, A.N. Kopobayeva, A. Amangeldykyzy, N.S. Askarova, D.S. Ozhigin

    The article presents the results of studying the mineralogical and geochemical features of coals and clay interlayers of the Shubarkol deposit. There were analyzed 71 samples of clay layers and 49 samples of coal using the instrumental neutron activation analysis (INAA), powder X-ray diffractometry, and scanning electron microscopy. A comprehensive analysis of the geochemical and mineralogical characteristics of coals and their enclosing clay interlayers was carried out. A variety of geochemical criteria made it possible to establish the facts of the rare earth elements (REE) migration, and the latest data of mineralogy made it possible to establish the ways of their transportation to the paleobasin in the syn- and epigenetic periods of the Shubarkol deposit formation. The data of the paleoclimate and water composition of the paleobasin of peat formation are presented for the first time. Among other things, the analysis made it possible to identify a number of independent sources and various mechanisms of REE accumulation in the sediments of the Shubarkol deposit. The main patterns of the REE distribution that are expressed in the predominance of light lanthanides over heavy lanthanides, were established, and the role and composition of the rocks surrounding coal deposits in the concentration of REE were considered. Aluminosilicates, sulfides, and sulfates with inclusions of microparticles of rare and rare-earth REE elements were found in coals and clay interlayers.


  • Open Access

    Study of rare earth elements in the coals of the Shubarkol deposit

    by A. Amangeldykyzy, Karaganda Technical University, A. Kopobaуeva, N. Askarova, D. Ozhigin, V. Portnov