Vera F. Yartseva
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Vera F. Yartseva has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Dmitriy Ozhigin
Abylkas Saginov Karaganda Technical University
3 shared publications - Victor Dolgonosov
Abylkas Saginov Karaganda Technical University
3 shared publications Abylkas Saginov Karaganda Technical University
2 shared publications- Dmitriy S. Ozhigin
Department of Mine Surveying and Geodesy, Abylkas Saginov Karaganda Technical University, Karaganda 100027, Kazakhstan
2 shared publications - Sergey Ozhigin
Abylkas Saginov Karaganda Technical University
2 shared publications - Svetlana Ozhigina
Abylkas Saginov Karaganda Technical University
2 shared publications
Latest Publications
- Open Access
- 8 October 2026
- Published by MDPI AG in Infrastructures
- Vol. 11 (10) , 363
Scenario-Based Assessment of Earth-Dam Stability Using Open Geospatial Data and Machine Learning: A Case Study of the Sherubay-Nur Reservoir, Kazakhstan
This article presents an integrated computational framework for scenario-based stability assessment of earth dams using open-access satellite data (Sentinel-2, Landsat 8/9), aerial imagery captured by UAVs, the FABDEM digital elevation model, and machine learning methods. The approach enables water surface detection, reservoir area calculation, water level reconstruction, and subsequent stability assessment via limit equilibrium modelling (Rocscience Slide2D). Tested on the Sherubay-Nur Reservoir (Kazakhstan), the method established a morphometric relationship between water level (534.20–536.80 m) and surface area (30.41–34.39 km2). Stability calculations showed a decrease in the factor of safety from 1.207 to 1.187 as the water level rose. Although all calculated values exceeded 1.0, this condition alone does not demonstrate compliance with the applicable stability criteria; the results indicate a consistent decrease in the factor of safety with increasing reservoir water level. The methodology developed does not replace field hydrometric, geodetic and geotechnical observations, but can be used as an additional analytical tool for retrospective analysis, supplementary model-based estimation of water levels and preliminary scenario-based assessment of the condition of hydraulic structures, particularly where on-site observations are incomplete or access to the site is restricted.
- 8 October 2026
- Published by MDPI AG in Infrastructures
- Vol. 11 (10) , 363
Open AccessScenario-Based Assessment of Earth-Dam Stability Using Open Geospatial Data and Machine Learning: A Case Study of the Sherubay-Nur Reservoir, Kazakhstan
This article presents an integrated computational framework for scenario-based stability assessment of earth dams using open-access satellite data (Sentinel-2, Landsat 8/9), aerial imagery captured by UAVs, the FABDEM digital elevation model, and machine learning methods. The approach enables water surface detection, reservoir area calculation, water level reconstruction, and subsequent stability assessment via limit equilibrium modelling (Rocscience Slide2D). Tested on the Sherubay-Nur Reservoir (Kazakhstan), the method established a morphometric relationship between water level (534.20–536.80 m) and surface area (30.41–34.39 km2). Stability calculations showed a decrease in the factor of safety from 1.207 to 1.187 as the water level rose. Although all calculated values exceeded 1.0, this condition alone does not demonstrate compliance with the applicable stability criteria; the results indicate a consistent decrease in the factor of safety with increasing reservoir water level. The methodology developed does not replace field hydrometric, geodetic and geotechnical observations, but can be used as an additional analytical tool for retrospective analysis, supplementary model-based estimation of water levels and preliminary scenario-based assessment of the condition of hydraulic structures, particularly where on-site observations are incomplete or access to the site is restricted.
- Open Access
Reconstruction of Waste Rock Dump Deformation Stages Based on Multi-Temporal UAV Photogrammetry, Terrestrial Laser Scanning, and Mine Surveying
This study investigates the development of deformation in the southern waste rock dump of the Western Open Pit of the Zhairem Mining and Concentrating Complex through the integrated analysis of multi-temporal geospatial data. The study addresses the need to move beyond the identification of surface changes toward the reconstruction of deformation development and the interpretation of the processes linking changes in dump geometry with the initiation of active displacements. The research is based on the combined use of mine surveying measurements, aerial survey data acquired using UAV, and terrestrial laser scanning. The methodology included the generation and spatial co-registration of multi-temporal digital models, the construction and analysis of cross-sections, the assessment of changes in dump lift geometry and crest positions, and the quantitative evaluation of displacements during the active stage of deformation. The results made it possible to establish the temporal sequence of changes preceding the deformation of the upper dump lift: changes in the geometry of the lower part of the waste rock dump, subsequent restoration of the previously disturbed area through renewed material deposition, and an increase in the height of the upper dump lift. These changes may be considered possible factors contributing to deformation development; however, the available data do not allow their direct causal role to be established. Cross-section No. 2 proved the most informative for reconstructing the deformation sequence, revealing characteristic morphological features, including disturbance of dump lift geometry, elevation loss within the failure zone, and displacements confirmed by terrestrial laser scanning. A comparison of two consecutive terrestrial laser scanning datasets showed pronounced displacements during the first observation interval, whereas during the second interval, the magnitude of the detected changes decreased substantially and was close to the level of metric uncertainty associated with the TLS comparison. The main outcome of this study is the retrospective reconstruction of the successive stages of a deformation event through the integrated analysis of datasets with different spatial and temporal resolutions. The results demonstrate the practical applicability of this approach for analyzing deformation development and supporting the monitoring of waste rock dumps at active mining operations.
Open AccessReconstruction of Waste Rock Dump Deformation Stages Based on Multi-Temporal UAV Photogrammetry, Terrestrial Laser Scanning, and Mine Surveying
This study investigates the development of deformation in the southern waste rock dump of the Western Open Pit of the Zhairem Mining and Concentrating Complex through the integrated analysis of multi-temporal geospatial data. The study addresses the need to move beyond the identification of surface changes toward the reconstruction of deformation development and the interpretation of the processes linking changes in dump geometry with the initiation of active displacements. The research is based on the combined use of mine surveying measurements, aerial survey data acquired using UAV, and terrestrial laser scanning. The methodology included the generation and spatial co-registration of multi-temporal digital models, the construction and analysis of cross-sections, the assessment of changes in dump lift geometry and crest positions, and the quantitative evaluation of displacements during the active stage of deformation. The results made it possible to establish the temporal sequence of changes preceding the deformation of the upper dump lift: changes in the geometry of the lower part of the waste rock dump, subsequent restoration of the previously disturbed area through renewed material deposition, and an increase in the height of the upper dump lift. These changes may be considered possible factors contributing to deformation development; however, the available data do not allow their direct causal role to be established. Cross-section No. 2 proved the most informative for reconstructing the deformation sequence, revealing characteristic morphological features, including disturbance of dump lift geometry, elevation loss within the failure zone, and displacements confirmed by terrestrial laser scanning. A comparison of two consecutive terrestrial laser scanning datasets showed pronounced displacements during the first observation interval, whereas during the second interval, the magnitude of the detected changes decreased substantially and was close to the level of metric uncertainty associated with the TLS comparison. The main outcome of this study is the retrospective reconstruction of the successive stages of a deformation event through the integrated analysis of datasets with different spatial and temporal resolutions. The results demonstrate the practical applicability of this approach for analyzing deformation development and supporting the monitoring of waste rock dumps at active mining operations.
- 4 August 2026
- Published by Interrin Scientific and Production Enterprise LLP in Горный журнал Казахстана
- No. 7(255),p. 50-55
REMOTE SENSING OF INDUSTRIAL STOCKPILES UNDER SNOW COVER: METHODS AND SCIENTIFIC CHALLENGES
Determining the volumes of stockpiled materials at industrial sites during the winter period is complicated by the presence of snow cover, which distorts surface geometry and reduces calculation accuracy. The aim of the study is to evaluate the effectiveness of remote sensing methods for mine surveying and geodetic support. The research is based on the analysis and comparison of laser scanning, satellite, radar, ground-penetrating radar, and photogrammetric methods. It is established that the integration of UAV-based photogrammetry and GNSS provides the highest efficiency. The scientific novelty lies in assessing the impact of snow cover on digital model accuracy and substantiating an integrated approach to their application Өнеркәсіптік қоймаларда сақталатын материалдардың көлемдерін анықтау қысқы кезеңде қар жамылғысының болуына байланысты күрделене түседі, себебі ол беттердің геометриясын бұрмалап, есептеулердің дәлдігін төмендетеді. Зерттеудің мақсаты -маркшейдерлік-геодезиялық қамтамасыз ету үшін қашықтықтан зондтау әдістерінің тиімділігін бағалау. Лазерлік сканерлеу, спутниктік, радиолокациялық, георадарлық және фотограмметриялық әдістер бойынша деректерді талдау және салыстыру қолданылды. Ең жоғары тиімділікті БПЛА-фотограмметриясы мен ГНСС интеграциясы қамтамасыз ететіні анықталды. Ғылыми жаңалығы қар жамылғысының цифрлық модельдердің дәлдігіне әсерін бағалауда және оларды қолданудың кешенді тәсілін негіздеуде жатыр. Қар қабаты өлшеу нәтижелерінің дәлдігіне әсер ететіні анықталды Определение объемов складируемых материалов на промышленных складах в зимний период осложняется наличием снежного покрова, искажающего геометрию поверхностей и снижающего точность расчетов. Цель исследования – оценка эффективности методов дистанционного зондирования для маркшейдерско-геодезического обеспечения. Применены анализ и сопоставление данных по лазерному сканированию, спутниковым, радиолокационным, георадарным и фотограмметрическим методам. Установлено, что наибольшую эффективность обеспечивает интеграция БПЛА-фотограмметрии и ГНСС. Научная новизна заключается в оценке влияния снежного покрова на точность цифровых моделей и обосновании комплексного подхода к их применению
- 4 August 2026
- Published by Interrin Scientific and Production Enterprise LLP in Горный журнал Казахстана
- No. 7(255),p. 50-55
REMOTE SENSING OF INDUSTRIAL STOCKPILES UNDER SNOW COVER: METHODS AND SCIENTIFIC CHALLENGES
Determining the volumes of stockpiled materials at industrial sites during the winter period is complicated by the presence of snow cover, which distorts surface geometry and reduces calculation accuracy. The aim of the study is to evaluate the effectiveness of remote sensing methods for mine surveying and geodetic support. The research is based on the analysis and comparison of laser scanning, satellite, radar, ground-penetrating radar, and photogrammetric methods. It is established that the integration of UAV-based photogrammetry and GNSS provides the highest efficiency. The scientific novelty lies in assessing the impact of snow cover on digital model accuracy and substantiating an integrated approach to their application Өнеркәсіптік қоймаларда сақталатын материалдардың көлемдерін анықтау қысқы кезеңде қар жамылғысының болуына байланысты күрделене түседі, себебі ол беттердің геометриясын бұрмалап, есептеулердің дәлдігін төмендетеді. Зерттеудің мақсаты -маркшейдерлік-геодезиялық қамтамасыз ету үшін қашықтықтан зондтау әдістерінің тиімділігін бағалау. Лазерлік сканерлеу, спутниктік, радиолокациялық, георадарлық және фотограмметриялық әдістер бойынша деректерді талдау және салыстыру қолданылды. Ең жоғары тиімділікті БПЛА-фотограмметриясы мен ГНСС интеграциясы қамтамасыз ететіні анықталды. Ғылыми жаңалығы қар жамылғысының цифрлық модельдердің дәлдігіне әсерін бағалауда және оларды қолданудың кешенді тәсілін негіздеуде жатыр. Қар қабаты өлшеу нәтижелерінің дәлдігіне әсер ететіні анықталды Определение объемов складируемых материалов на промышленных складах в зимний период осложняется наличием снежного покрова, искажающего геометрию поверхностей и снижающего точность расчетов. Цель исследования – оценка эффективности методов дистанционного зондирования для маркшейдерско-геодезического обеспечения. Применены анализ и сопоставление данных по лазерному сканированию, спутниковым, радиолокационным, георадарным и фотограмметрическим методам. Установлено, что наибольшую эффективность обеспечивает интеграция БПЛА-фотограмметрии и ГНСС. Научная новизна заключается в оценке влияния снежного покрова на точность цифровых моделей и обосновании комплексного подхода к их применению
- 16 June 2025
- Published by Institute of Metallurgy and Ore Benefication (Publications) in Kompleksnoe Ispolzovanie Mineralnogo Syra = Complex Use of Mineral Resources
- Vol. 338 (3) , 72-80
Study of rock mass structural features based on laser scanning results
Monitoring of pit slopes benches stability and pit walls plays the important role in the safety of mining operations. Slope stability assessment and risk management are mandatory to ensure safe and efficient operation of pits. Laser scanning technology is one of the base methods of geospatial data collecting for building of man-made objects models. Laser scanning is widely used in mining when performing survey work, measurements, monitoring, and studying structural features on the outcroppings of the rock mass. The article describes the technological chain: the collection of geospatial data, the processing of the obtained data with the construction of a terrain model and the further use of the resulting model to solve practical tasks. The choice of optimal laser scanning parameters should be based on the technological features of a pit, the technical characteristics of used equipment and scanning density required to solve the tasks. The article demonstrates the use of the obtained model for determining the necessary geometric parameters of the structural features of the rock mass to conduct kinematic analysis of potential bench failures at the object of study. Based on the results of kinematic analysis, recommendations were developed for further mining operations and potential bench failures risks reducing. The proposed technology can be used and adapted for laser scanning, followed by the construction of a terrain model at various mineral deposits to solve a wide range of tasks and ensure the safety of open-pit mining. Due to the inclusion of laser scanners in the register of measuring instruments in Kazakhstan, high reliability of measurement accuracy is ensured. The technology allows both to obtain generalized data on the sides of the quarry, as well as detailed scans of individual ledges. A significant advantage is the automatic generation of a point cloud during scanning, which reduces in-house processing.
- 16 June 2025
- Published by Institute of Metallurgy and Ore Benefication (Publications) in Kompleksnoe Ispolzovanie Mineralnogo Syra = Complex Use of Mineral Resources
- Vol. 338 (3) , 72-80
Study of rock mass structural features based on laser scanning results
Monitoring of pit slopes benches stability and pit walls plays the important role in the safety of mining operations. Slope stability assessment and risk management are mandatory to ensure safe and efficient operation of pits. Laser scanning technology is one of the base methods of geospatial data collecting for building of man-made objects models. Laser scanning is widely used in mining when performing survey work, measurements, monitoring, and studying structural features on the outcroppings of the rock mass. The article describes the technological chain: the collection of geospatial data, the processing of the obtained data with the construction of a terrain model and the further use of the resulting model to solve practical tasks. The choice of optimal laser scanning parameters should be based on the technological features of a pit, the technical characteristics of used equipment and scanning density required to solve the tasks. The article demonstrates the use of the obtained model for determining the necessary geometric parameters of the structural features of the rock mass to conduct kinematic analysis of potential bench failures at the object of study. Based on the results of kinematic analysis, recommendations were developed for further mining operations and potential bench failures risks reducing. The proposed technology can be used and adapted for laser scanning, followed by the construction of a terrain model at various mineral deposits to solve a wide range of tasks and ensure the safety of open-pit mining. Due to the inclusion of laser scanners in the register of measuring instruments in Kazakhstan, high reliability of measurement accuracy is ensured. The technology allows both to obtain generalized data on the sides of the quarry, as well as detailed scans of individual ledges. A significant advantage is the automatic generation of a point cloud during scanning, which reduces in-house processing.
- 23 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 145-150
Monitoring of Open Pit Conditions with Unmanned Aircraft System
The article presents the use of unmanned aircraft systems in an aerial photographic survey of a gold ore deposit. The author's methodology for conducting surveys is described as stepwise. A comparative study of deposit ore zones topographic map created based on instrumental measurements was also carried out, using the aerial photography data-driven digital surface model. This study was conducted at the open pit of TOO GRK Tuz (A mining company in Kazakhstan) and includes the following stages: a topographic survey of the undeveloped area, survey scale 1:1000, a vertical interval of 1.0 m; modeling of geospatial data (point cloud, orthophoto map, digital surface model); comparison of existing topographic plan with digital surface model.
- 23 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 145-150
Monitoring of Open Pit Conditions with Unmanned Aircraft System
The article presents the use of unmanned aircraft systems in an aerial photographic survey of a gold ore deposit. The author's methodology for conducting surveys is described as stepwise. A comparative study of deposit ore zones topographic map created based on instrumental measurements was also carried out, using the aerial photography data-driven digital surface model. This study was conducted at the open pit of TOO GRK Tuz (A mining company in Kazakhstan) and includes the following stages: a topographic survey of the undeveloped area, survey scale 1:1000, a vertical interval of 1.0 m; modeling of geospatial data (point cloud, orthophoto map, digital surface model); comparison of existing topographic plan with digital surface model.
- 1 January 2024
- Published by Publishing House Minerals Management and Mining Science in Mine Surveying and Subsurface Use
- No. 6,p. 5-11
Study of adjacent rock mass condition using aerial photography at Ekolog Open-pit Mine
The article is dedicated to the use of air photography for adjacent rock mass monitoring with DJI Mavic 2 Pro drone at Ekolog Open-pit Mine. The survey objective is to create high-precision geospatial models of the terrain to analyze site conditions. Particular attention is paid to flight mission planning with due regard for the terrain to improve the accuracy of the data required for further mine surveying.
- 1 January 2024
- Published by Publishing House Minerals Management and Mining Science in Mine Surveying and Subsurface Use
- No. 6,p. 5-11
Study of adjacent rock mass condition using aerial photography at Ekolog Open-pit Mine
The article is dedicated to the use of air photography for adjacent rock mass monitoring with DJI Mavic 2 Pro drone at Ekolog Open-pit Mine. The survey objective is to create high-precision geospatial models of the terrain to analyze site conditions. Particular attention is paid to flight mission planning with due regard for the terrain to improve the accuracy of the data required for further mine surveying.