Igor Khozyaev
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Igor Khozyaev has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Andrey Chistyakov
Don State Technical University
2 shared publications - Nikolay Eletsky
Academy of Philosophy of Economy
2 shared publications - Alexey A. Shcherbakov
Don State Technical University
1 shared publication - Artyom Doroshenko
Don State Technical University
1 shared publication - Dmitriy Podlesniy
Federal State-Founded Scientific Establishment “Agricultural research center “Donskoy”, 14, Lenina Street, Zernograd, 347740, Russia
1 shared publication - Dmitry Anatolevich Yakovlev
Don State Technical University
1 shared publication
Latest Publications
- Open Access
- 21 December 2024
- Published by ECO-Vector LLC in Tractors and Agricultural Machinery
- Vol. 91 (6) , 683-694
Systematization of steam cultivators
BACKGROUND: When applied to the soil during the cultivation process, the moisture and air permeability of the layer improves, which favors the activity of microorganisms and the growth and development of plants. The increase in the yield of agricultural crop production directly depends on the level of technology of the new generation machinery. Therefore, the improvement of their designs in order to increase the level of technology of the new generation machinery is a relevant task of the agricultural industry. OBJECTIVE: Systematization and ordering of known designs of steam cultivators, identification of their advantages and disadvantages. METHODS: The method of monographic examination of the structures of steam cultivators, both the machine as a whole and the main working bodies separately, was used on the basis of well-known scientific studies and the results of state tests. Thus, the really working steam cultivators recommended for use in agricultural production were considered. In addition, the patented designs of the working bodies of steam cultivators were analyzed. The efficiency of steam cultivators was determined based on the results of state tests of the Povolzhsky, Northwestern, Siberian, Kuban, North Caucasian, Central Chernozem, Kirov, Vladimir machinery testing stations over the past 10 years. RESULTS: The paper contains a review of steam cultivators and their designs. The classification of cultivators by 3 types is given: by the type of main working bodies (paws); by the type of additional working bodies (rollers, harrows, rods); by the type of attachment to the tractor (trailed, mounted). Their advantages and disadvantages are considered. A review of studies on improving the designs of steam cultivators to improve the tillage quality and to reduce energy consumption for tillage is given. The working bodies (paws), the frame parts for mounting the main working bodies, the strut and the design of additional working bodies of steam cultivators are being modernized. Theoretical studies on improving the efficiency of cultivators are considered. The conditions for achieving and improving the tillage quality with a steam cultivator are revealed by determining the relationship of parameters with the indicators of the technological process. The application of computer simulation modeling in solving theoretical problems of study of the new working bodies is considered, advantages and disadvantages are revealed. CONCLUSIONS: The systematization of steam cultivators presented in this paper is helpful to determine ways to further improvement of them.
- 21 December 2024
- Published by ECO-Vector LLC in Tractors and Agricultural Machinery
- Vol. 91 (6) , 683-694
Open AccessSystematization of steam cultivators
BACKGROUND: When applied to the soil during the cultivation process, the moisture and air permeability of the layer improves, which favors the activity of microorganisms and the growth and development of plants. The increase in the yield of agricultural crop production directly depends on the level of technology of the new generation machinery. Therefore, the improvement of their designs in order to increase the level of technology of the new generation machinery is a relevant task of the agricultural industry. OBJECTIVE: Systematization and ordering of known designs of steam cultivators, identification of their advantages and disadvantages. METHODS: The method of monographic examination of the structures of steam cultivators, both the machine as a whole and the main working bodies separately, was used on the basis of well-known scientific studies and the results of state tests. Thus, the really working steam cultivators recommended for use in agricultural production were considered. In addition, the patented designs of the working bodies of steam cultivators were analyzed. The efficiency of steam cultivators was determined based on the results of state tests of the Povolzhsky, Northwestern, Siberian, Kuban, North Caucasian, Central Chernozem, Kirov, Vladimir machinery testing stations over the past 10 years. RESULTS: The paper contains a review of steam cultivators and their designs. The classification of cultivators by 3 types is given: by the type of main working bodies (paws); by the type of additional working bodies (rollers, harrows, rods); by the type of attachment to the tractor (trailed, mounted). Their advantages and disadvantages are considered. A review of studies on improving the designs of steam cultivators to improve the tillage quality and to reduce energy consumption for tillage is given. The working bodies (paws), the frame parts for mounting the main working bodies, the strut and the design of additional working bodies of steam cultivators are being modernized. Theoretical studies on improving the efficiency of cultivators are considered. The conditions for achieving and improving the tillage quality with a steam cultivator are revealed by determining the relationship of parameters with the indicators of the technological process. The application of computer simulation modeling in solving theoretical problems of study of the new working bodies is considered, advantages and disadvantages are revealed. CONCLUSIONS: The systematization of steam cultivators presented in this paper is helpful to determine ways to further improvement of them.
- 25 February 2023
- Published by Springer Nature
- p. 674-681
Fuzzy Model of the Macroregion’s Production Clusters Location
- 25 February 2023
- Published by Springer Nature
- p. 674-681
Fuzzy Model of the Macroregion’s Production Clusters Location
- 5 February 2023
- Published by Springer Nature
- p. 2947-2956
Energy Conversion in Agribusiness
- Open Access
- 30 December 2022
- Published by National Research Mordovia State University MRSU in Engineering Technologies and Systems
- Vol. 32 (4)
Studying the Thermophysical Characteristics of the Muscle Mass of the Black Soldier Fly Larvaes (Hermetia Illucens) as a Drying Object
Introduction. The main component of the compound feedstuff is fish meal, which has unstable quality and high price. Fish and meat-and-bone meals are replaced with protein concentrates and higher quality larvae proteins. The source of feed protein is the biomass of the black soldier flies (Hermetia illucens), which have a rich amino acid composition and also process food waste. The aim of the work is to study the thermal-physical characteristics of the muscle mass of the black soldier fly larvaes (Hermetia illucens). Материалы и методы. The study focused on the muscle mass of black soldier fly larvaes (Hermetia illucens). The subject of the study is thermal-physical regularities during the drying process. The studies were conducted on the basis of Don State Technical University. The article describes determination of thermal-physical characteristics such as specific heat, thermal conductivity, moisture of the raw material, and oiliness. Results. Heat conductivity coefficient of water 0.555 W/(m∙K) for food and feed products from 0.25 to 0.40 W/(m∙K) black Soldier Fly larvae have a heat conductivity equal to 0.144 W/(m∙K), which is lower than conventional feedstuff components. The humidity of the examined raw material is 45% or higher while the heat conductivity remains linear and practically does not increase. Discussion and Conclusion. The results obtained during the work can be used for parameter determination and design of various types of dryers, and for mathematical description of the dynamics and kinetics of drying.
- 30 December 2022
- Published by National Research Mordovia State University MRSU in Engineering Technologies and Systems
- Vol. 32 (4)
Open AccessStudying the Thermophysical Characteristics of the Muscle Mass of the Black Soldier Fly Larvaes (Hermetia Illucens) as a Drying Object
Introduction. The main component of the compound feedstuff is fish meal, which has unstable quality and high price. Fish and meat-and-bone meals are replaced with protein concentrates and higher quality larvae proteins. The source of feed protein is the biomass of the black soldier flies (Hermetia illucens), which have a rich amino acid composition and also process food waste. The aim of the work is to study the thermal-physical characteristics of the muscle mass of the black soldier fly larvaes (Hermetia illucens). Материалы и методы. The study focused on the muscle mass of black soldier fly larvaes (Hermetia illucens). The subject of the study is thermal-physical regularities during the drying process. The studies were conducted on the basis of Don State Technical University. The article describes determination of thermal-physical characteristics such as specific heat, thermal conductivity, moisture of the raw material, and oiliness. Results. Heat conductivity coefficient of water 0.555 W/(m∙K) for food and feed products from 0.25 to 0.40 W/(m∙K) black Soldier Fly larvae have a heat conductivity equal to 0.144 W/(m∙K), which is lower than conventional feedstuff components. The humidity of the examined raw material is 45% or higher while the heat conductivity remains linear and practically does not increase. Discussion and Conclusion. The results obtained during the work can be used for parameter determination and design of various types of dryers, and for mathematical description of the dynamics and kinetics of drying.
- 31 October 2021
- Published by Springer Nature
- p. 251-259
A Tool for Locating Logistics Centers Based on Economic and Social Factors
- 31 October 2021
- Published by Springer Nature
- p. 251-259
A Tool for Locating Logistics Centers Based on Economic and Social Factors