Annika Krusenbaum
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Annika Krusenbaum has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Lars Borchardt
Ruhr-Universität Bochum, Universitätsstraße 150, 44801 Bochum, Germany
6 shared publications - Sven Grätz
Ruhr-Universität Bochum, Universitätsstraße 150, 44801 Bochum, Germany
6 shared publications - Anjana Devi
Leibniz Institute for Solid State and Materials Research
3 shared publications - Arbresha Muriqi
Tyndall National Institute, University College Cork, Lee Maltings, Dyke Parade, Cork T12R5CP, Ireland
3 shared publications - Martin Wilken
Inorganic Materials Chemistry Ruhr University Bochum Universitätsstr. 150 44801 Bochum Germany
3 shared publications - Michael Nolan
Tyndall National Institute, University College Cork, Lee Maltings, Dyke Parade, Cork T12R5CP, Ireland
3 shared publications
Latest Publications
- 12 August 2024
- Published by Wiley in Chemistry – A European Journal
- Vol. 30 (45)
Cover Feature: Targeting Manganese Amidinate and ß‐Ketoiminate Complexes as Precursors for Mn‐Based Thin Film Deposition (Chem. Eur. J. 45/2024)
- 12 August 2024
- Published by Wiley in Chemistry – A European Journal
- Vol. 30 (45)
Cover Feature: Targeting Manganese Amidinate and ß‐Ketoiminate Complexes as Precursors for Mn‐Based Thin Film Deposition (Chem. Eur. J. 45/2024)
- Open Access
- 4 July 2024
- Published by Wiley in Chemistry – A European Journal
- Vol. 30 (45) , e202401275
Targeting Manganese Amidinate and ß‐Ketoiminate Complexes as Precursors for Mn‐Based Thin Film Deposition
With a focus on Mn based organometallic compounds with suitable physico‐chemical properties to serve as precursors for chemical vapor deposition (CVD) and atomic layer deposition (ALD) of Mn‐containing materials, systematic synthetic approaches with ligand variation, detailed characterization, and theoretical input from density functional theory (DFT) studies are presented. A series of new homoleptic all‐nitrogen and mixed oxygen/nitrogen‐coordinated Mn(II) complexes bearing the acetamidinate, formamidinate, guanidinate and ß‐ketoiminate ligands have been successfully synthesized for the first time. The specific choice of these ligand classes with changes in structure and coordination sphere and side chain variations result in significant structural differences whereby mononuclear and dinuclear complexes are formed. This was supported by density functional theory (DFT) studies. The compounds were thoroughly characterized by single crystal X‐ray diffraction, magnetic measurements, mass spectrometry and elemental analysis. To evaluate their suitability as precursors for deposition of Mn‐based materials, the thermal properties were investigated in detail. Mn(II) complexes possessing the most promising thermal properties, namely Bis(N,N’‐ditertbutylformamidinato)manganese(II) (IV) and Bis(4‐(isopropylamino)pent‐3‐en‐2‐onato)manganese(II) (ßIII) were used in reactivity studies with DFT to explore their interaction with oxidizing co‐reactants such as oxygen and water which will guide future CVD and ALD process development.
- 4 July 2024
- Published by Wiley in Chemistry – A European Journal
- Vol. 30 (45) , e202401275
Open AccessTargeting Manganese Amidinate and ß‐Ketoiminate Complexes as Precursors for Mn‐Based Thin Film Deposition
With a focus on Mn based organometallic compounds with suitable physico‐chemical properties to serve as precursors for chemical vapor deposition (CVD) and atomic layer deposition (ALD) of Mn‐containing materials, systematic synthetic approaches with ligand variation, detailed characterization, and theoretical input from density functional theory (DFT) studies are presented. A series of new homoleptic all‐nitrogen and mixed oxygen/nitrogen‐coordinated Mn(II) complexes bearing the acetamidinate, formamidinate, guanidinate and ß‐ketoiminate ligands have been successfully synthesized for the first time. The specific choice of these ligand classes with changes in structure and coordination sphere and side chain variations result in significant structural differences whereby mononuclear and dinuclear complexes are formed. This was supported by density functional theory (DFT) studies. The compounds were thoroughly characterized by single crystal X‐ray diffraction, magnetic measurements, mass spectrometry and elemental analysis. To evaluate their suitability as precursors for deposition of Mn‐based materials, the thermal properties were investigated in detail. Mn(II) complexes possessing the most promising thermal properties, namely Bis(N,N’‐ditertbutylformamidinato)manganese(II) (IV) and Bis(4‐(isopropylamino)pent‐3‐en‐2‐onato)manganese(II) (ßIII) were used in reactivity studies with DFT to explore their interaction with oxidizing co‐reactants such as oxygen and water which will guide future CVD and ALD process development.
- Open Access
- 3 April 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Synthesis, Structure, Thermal Properties and Reactivity Studies on Manganese Amidinates and ß-Ketoiminates Supported by DFT: Potential Precursors for Vapor Deposition of Mn-Based Thin Films
To identify Mn based organometallic compounds that serve as precursors for chemical vapor deposition (CVD) and atomic layer deposition (ALD) processes, systematic synthetic approaches with ligand variation, detailed characterization and theoretical input from density functional theory (DFT) studies were adopted. In this context, a series of new homoleptic all-nitrogen and mixed oxygen/nitrogen-coordinated Mn(II) complexes bearing the acetamidinate, formamidinate, guanidinate and ß-ketoiminate ligands have been successfully synthesized for the first time. The compounds were thoroughly characterized by single crystal X-ray diffraction, Evans NMR, mass spectrometry and elemental analysis. To evaluate their potential use as precursors for Mn-based materials, the thermal properties were investigated in detail. The specific choice of these ligand classes with changes in structure and coordination sphere and side chain variations result in significant structural differences whereby mononuclear and dinuclear complexes are formed. This was supported by density functional theory (DFT) studies. The most promising Mn(II) compounds in terms of the thermal properties, namely Bis(N,N´-ditertbutylformamidinato)manganese(II) and Bis(4-(isopropylamino)pent-3-en-2-onato)manganese(II) were used in reactivity studies with DFT to explore their interaction with oxidizing co-reactants such as oxygen and water which are relevant for CVD and ALD process development.
- 3 April 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessSynthesis, Structure, Thermal Properties and Reactivity Studies on Manganese Amidinates and ß-Ketoiminates Supported by DFT: Potential Precursors for Vapor Deposition of Mn-Based Thin Films
To identify Mn based organometallic compounds that serve as precursors for chemical vapor deposition (CVD) and atomic layer deposition (ALD) processes, systematic synthetic approaches with ligand variation, detailed characterization and theoretical input from density functional theory (DFT) studies were adopted. In this context, a series of new homoleptic all-nitrogen and mixed oxygen/nitrogen-coordinated Mn(II) complexes bearing the acetamidinate, formamidinate, guanidinate and ß-ketoiminate ligands have been successfully synthesized for the first time. The compounds were thoroughly characterized by single crystal X-ray diffraction, Evans NMR, mass spectrometry and elemental analysis. To evaluate their potential use as precursors for Mn-based materials, the thermal properties were investigated in detail. The specific choice of these ligand classes with changes in structure and coordination sphere and side chain variations result in significant structural differences whereby mononuclear and dinuclear complexes are formed. This was supported by density functional theory (DFT) studies. The most promising Mn(II) compounds in terms of the thermal properties, namely Bis(N,N´-ditertbutylformamidinato)manganese(II) and Bis(4-(isopropylamino)pent-3-en-2-onato)manganese(II) were used in reactivity studies with DFT to explore their interaction with oxidizing co-reactants such as oxygen and water which are relevant for CVD and ALD process development.
- Open Access
- 12 June 2023
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 25 (25) , 16781-16789
Rationalizing the formation of porosity in mechanochemically-synthesized polymers
The generation of a matrix of 144 mechanochemically-synthesized polymers reveals that the physical state, molecular size, geometry, flexibility, and electronic structure of the building blocks are crucial for polymer porosity.
- 12 June 2023
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 25 (25) , 16781-16789
Open AccessRationalizing the formation of porosity in mechanochemically-synthesized polymers
The generation of a matrix of 144 mechanochemically-synthesized polymers reveals that the physical state, molecular size, geometry, flexibility, and electronic structure of the building blocks are crucial for polymer porosity.
- Open Access
- 28 April 2023
- Published by American Chemical Society (ACS) in ChemRxiv
Rationalizing the Formation of Porosity in Mechanochemically-Synthesized Polymers
In this study, we present a matrix of 144 mechanochemically synthesized polymers. All polymers were constructed by the solvent free Friedel Crafts polymerization approach, employing 16 aryl containing monomers and 9 halide containing linkers, which were processed in a high speed ball mill. This Polymer Matrix was utilized to investigate the origin of porosity in Friedel Crafts polymerizations in detail. By examining the physical state, molecular size, geometry, flexibility, and electronic structure of the utilized monomers and linkers, we identified the most important factors influencing the formation of porous polymers. We analyzed the significance of these factors for both monomers and linkers based on the yield and specific surface area of the generated polymers. Our in-depth evaluation serves as a benchmark study for future targeted design of porous polymers by the facile and sustainable concept of mechanochemistry.
- 28 April 2023
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessRationalizing the Formation of Porosity in Mechanochemically-Synthesized Polymers
In this study, we present a matrix of 144 mechanochemically synthesized polymers. All polymers were constructed by the solvent free Friedel Crafts polymerization approach, employing 16 aryl containing monomers and 9 halide containing linkers, which were processed in a high speed ball mill. This Polymer Matrix was utilized to investigate the origin of porosity in Friedel Crafts polymerizations in detail. By examining the physical state, molecular size, geometry, flexibility, and electronic structure of the utilized monomers and linkers, we identified the most important factors influencing the formation of porous polymers. We analyzed the significance of these factors for both monomers and linkers based on the yield and specific surface area of the generated polymers. Our in-depth evaluation serves as a benchmark study for future targeted design of porous polymers by the facile and sustainable concept of mechanochemistry.
- Open Access
- 9 February 2023
- Published by Wiley in Advanced Sustainable Systems
- Vol. 7 (4)
The Rapid Mechanochemical Synthesis of Microporous Covalent Triazine Networks: Elucidating the Role of Chlorinated Linkers by a Solvent‐Free Approach
The mechanochemical synthesis of porous covalent triazine networks (CTNs), exhibiting theoretically ideal C/N ratios and high specific surface areas, is presented. Employing this solvent‐free approach allows to minimize the ecological impact of the synthesis by bypassing hazardous wastes, while simultaneously observing the reactions between the individual starting materials separately for the first time. Especially the role of dichloromethane needs to be reconsidered, functioning as a linker between the nitrogen‐containing node cyanuric chloride and the aromatic monomer 1,3,5‐triphenylbenzene, as proven by X‐ray photoelectron spectroscopy and 1H → 13C Cross‐Polarization magic‐angle‐spinning nuclear magnetic resonance spectroscopy. This results in a drastic enhancement of the reaction rate, reducing the synthesis time down to 1 minute. Additionally, this linkage over a C1 bridge enables the incorporation of nitrogen into already synthesized polymers by post polymerization functionalization. The variation of the synthesis building blocks, namely the linker, node, and monomer, results in a variety of nitrogen‐containing polymers with specific surface areas of up to 1500 m2 g−1. Therefore, the presented approach is capable to target the synthesis of various CTNs with a minimal use of chlorinated linker, rendering the concept as a sustainable alternative to the classical solution‐based synthesis.
- 9 February 2023
- Published by Wiley in Advanced Sustainable Systems
- Vol. 7 (4)
Open AccessThe Rapid Mechanochemical Synthesis of Microporous Covalent Triazine Networks: Elucidating the Role of Chlorinated Linkers by a Solvent‐Free Approach
The mechanochemical synthesis of porous covalent triazine networks (CTNs), exhibiting theoretically ideal C/N ratios and high specific surface areas, is presented. Employing this solvent‐free approach allows to minimize the ecological impact of the synthesis by bypassing hazardous wastes, while simultaneously observing the reactions between the individual starting materials separately for the first time. Especially the role of dichloromethane needs to be reconsidered, functioning as a linker between the nitrogen‐containing node cyanuric chloride and the aromatic monomer 1,3,5‐triphenylbenzene, as proven by X‐ray photoelectron spectroscopy and 1H → 13C Cross‐Polarization magic‐angle‐spinning nuclear magnetic resonance spectroscopy. This results in a drastic enhancement of the reaction rate, reducing the synthesis time down to 1 minute. Additionally, this linkage over a C1 bridge enables the incorporation of nitrogen into already synthesized polymers by post polymerization functionalization. The variation of the synthesis building blocks, namely the linker, node, and monomer, results in a variety of nitrogen‐containing polymers with specific surface areas of up to 1500 m2 g−1. Therefore, the presented approach is capable to target the synthesis of various CTNs with a minimal use of chlorinated linker, rendering the concept as a sustainable alternative to the classical solution‐based synthesis.
- 5 September 2022
- Published by Elsevier in Microporous and Mesoporous Materials
- Vol. 344, 112204
Potential of novel porous materials for capture of toluene traces in air under humid conditions
- 5 September 2022
- Published by Elsevier in Microporous and Mesoporous Materials
- Vol. 344, 112204
Potential of novel porous materials for capture of toluene traces in air under humid conditions
- Top Cited PapersOpen Access
- 18 March 2022
- Published by Royal Society of Chemistry (RSC) in Chemical Society Reviews
- Vol. 51 (7) , 2873-2905
The mechanochemical synthesis of polymers
Mechanochemistry enables solvent-free syntheses of even novel polymer structures without the need of monomer solubility.
- 18 March 2022
- Published by Royal Society of Chemistry (RSC) in Chemical Society Reviews
- Vol. 51 (7) , 2873-2905
Top Cited PapersOpen AccessThe mechanochemical synthesis of polymers
Mechanochemistry enables solvent-free syntheses of even novel polymer structures without the need of monomer solubility.
- Open Access
- 28 October 2021
- Published by Wiley in Journal of Polymer Science
- Vol. 60 (1) , 62-71
The mechanochemical Friedel‐Crafts polymerization as a solvent‐free cross‐linking approach toward microporous polymers
Herein we report the mechanochemical Friedel‐Crafts alkylation of 1,3,5‐triphenylbenzene (TPB) with two organochloride cross‐linking agents, dichloromethane (DCM) and chloroform (CHCl3), respectively. During a thorough milling parameter evaluation, the DCM‐linked polymers were found to be flexible and extremely sensitive toward parameter changes, which even enables the synthesis of a polymer with a SSABET of 1670 m2/g, on par with the solution‐based reference. Contrary, CHCl3‐linked polymers are exhibiting a rigid structure, with a high porosity that is widely unaffected by parameter changes. As a result, a polymer with a SSABET of 1280 m2/g could be generated in as little as 30 minutes, outperforming the reported literature analogue in terms of synthesis time and SSABET. To underline the environmental benefits of our fast and solvent‐free synthesis approach, the green metrics are discussed, revealing an enhancement of the mass intensity, mass productivity and the E‐factor, as well as of synthesis time and the work‐up in comparison to the classical synthesis. Therefore, the mechanochemical polymerization is presented as a versatile tool, enabling the generation of highly porous polymers within short reaction times, with a minimal use of chlorinated cross‐linker and with the possibility of a post polymerization modification.
- 28 October 2021
- Published by Wiley in Journal of Polymer Science
- Vol. 60 (1) , 62-71
Open AccessThe mechanochemical Friedel‐Crafts polymerization as a solvent‐free cross‐linking approach toward microporous polymers
Herein we report the mechanochemical Friedel‐Crafts alkylation of 1,3,5‐triphenylbenzene (TPB) with two organochloride cross‐linking agents, dichloromethane (DCM) and chloroform (CHCl3), respectively. During a thorough milling parameter evaluation, the DCM‐linked polymers were found to be flexible and extremely sensitive toward parameter changes, which even enables the synthesis of a polymer with a SSABET of 1670 m2/g, on par with the solution‐based reference. Contrary, CHCl3‐linked polymers are exhibiting a rigid structure, with a high porosity that is widely unaffected by parameter changes. As a result, a polymer with a SSABET of 1280 m2/g could be generated in as little as 30 minutes, outperforming the reported literature analogue in terms of synthesis time and SSABET. To underline the environmental benefits of our fast and solvent‐free synthesis approach, the green metrics are discussed, revealing an enhancement of the mass intensity, mass productivity and the E‐factor, as well as of synthesis time and the work‐up in comparison to the classical synthesis. Therefore, the mechanochemical polymerization is presented as a versatile tool, enabling the generation of highly porous polymers within short reaction times, with a minimal use of chlorinated cross‐linker and with the possibility of a post polymerization modification.