Martin Wilken
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Martin Wilken has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Anjana Devi
Leibniz Institute for Solid State and Materials Research
6 shared publications - Michael Nolan
Tyndall National Institute, University College Cork, Lee Maltings, Dyke Parade, Cork T12R5CP, Ireland
4 shared publications - Annika Krusenbaum
Inorganic Chemistry I Ruhr University Bochum Universitätsstr. 150 44801 Bochum Germany
3 shared publications - Arbresha Muriqi
Tyndall National Institute, University College Cork, Lee Maltings, Dyke Parade, Cork T12R5CP, Ireland
3 shared publications - Detlef Rogalla
RUBION Ruhr University Bochum Bochum Germany
2 shared publications - Engin Ciftyurek
Department of Materials Science, Institute for Experimental Condensed Matter Physics, Heinrich Heine University of Düsseldorf, 40225 Düsseldorf, Germany
2 shared publications
Latest Publications
- Open Access
A Liquid Ge(IV) Precursor for Low Temperature Plasma Enhanced Atomic Layer Deposition of Germanium Oxide Thin Films
Germanium oxide thin films are promising for advanced applications such as microelectronics, optoelectronics, high‐power electronics, optics, and biomedical uses. However, scalable and controlled low‐temperature synthesis of GeO 2 thin films via atomic layer deposition (ALD) is limited by the small range of available Ge precursors. We introduce monomeric tetrakis‐3‐( N , N ‐dimethylamino)propyl germanium(IV) [Ge(DMP) 4 ] as a promising Ge precursor. It is non‐pyrophoric, thermally stable, and liquid, and can be obtained in high purity on a multigram scale through an industrially feasible synthesis. Using density functional theory (DFT) and mass spectrometry (MS), we rationalize the coordination environment and identify a feasible chemisorption pathway, indicating a high reactivity of the precursor. Subsequently, [Ge(DMP) 4 ] was employed in low‐temperature plasma‐enhanced ALD (PEALD) over a wide temperature range from 40°C to 240°C, yielding smooth, uniform germanium oxide films. Rapid and homogeneous nucleation leads to dense films with sub‐nanometer thickness. By adjusting the deposition temperature and plasma duration, the film composition could be readily tuned from GeO 2 to sub‐stoichiometric GeO x . These findings establish [Ge(DMP) 4 ] as an effective, scalable precursor for low‐temperature ALD of GeO 2 , emphasizing the critical role of precursor chemistry in ALD process development.
Open AccessA Liquid Ge(IV) Precursor for Low Temperature Plasma Enhanced Atomic Layer Deposition of Germanium Oxide Thin Films
Germanium oxide thin films are promising for advanced applications such as microelectronics, optoelectronics, high‐power electronics, optics, and biomedical uses. However, scalable and controlled low‐temperature synthesis of GeO 2 thin films via atomic layer deposition (ALD) is limited by the small range of available Ge precursors. We introduce monomeric tetrakis‐3‐( N , N ‐dimethylamino)propyl germanium(IV) [Ge(DMP) 4 ] as a promising Ge precursor. It is non‐pyrophoric, thermally stable, and liquid, and can be obtained in high purity on a multigram scale through an industrially feasible synthesis. Using density functional theory (DFT) and mass spectrometry (MS), we rationalize the coordination environment and identify a feasible chemisorption pathway, indicating a high reactivity of the precursor. Subsequently, [Ge(DMP) 4 ] was employed in low‐temperature plasma‐enhanced ALD (PEALD) over a wide temperature range from 40°C to 240°C, yielding smooth, uniform germanium oxide films. Rapid and homogeneous nucleation leads to dense films with sub‐nanometer thickness. By adjusting the deposition temperature and plasma duration, the film composition could be readily tuned from GeO 2 to sub‐stoichiometric GeO x . These findings establish [Ge(DMP) 4 ] as an effective, scalable precursor for low‐temperature ALD of GeO 2 , emphasizing the critical role of precursor chemistry in ALD process development.
- 12 August 2024
- Published by Wiley in Chemistry – A European Journal
- Vol. 30 (45)
Cover Feature: Targeting Manganese Amidinate and ß‐Ketoiminate Complexes as Precursors for Mn‐Based Thin Film Deposition (Chem. Eur. J. 45/2024)
- 12 August 2024
- Published by Wiley in Chemistry – A European Journal
- Vol. 30 (45)
Cover Feature: Targeting Manganese Amidinate and ß‐Ketoiminate Complexes as Precursors for Mn‐Based Thin Film Deposition (Chem. Eur. J. 45/2024)
- Open Access
- 4 July 2024
- Published by Wiley in Chemistry – A European Journal
- Vol. 30 (45) , e202401275
Targeting Manganese Amidinate and ß‐Ketoiminate Complexes as Precursors for Mn‐Based Thin Film Deposition
With a focus on Mn based organometallic compounds with suitable physico‐chemical properties to serve as precursors for chemical vapor deposition (CVD) and atomic layer deposition (ALD) of Mn‐containing materials, systematic synthetic approaches with ligand variation, detailed characterization, and theoretical input from density functional theory (DFT) studies are presented. A series of new homoleptic all‐nitrogen and mixed oxygen/nitrogen‐coordinated Mn(II) complexes bearing the acetamidinate, formamidinate, guanidinate and ß‐ketoiminate ligands have been successfully synthesized for the first time. The specific choice of these ligand classes with changes in structure and coordination sphere and side chain variations result in significant structural differences whereby mononuclear and dinuclear complexes are formed. This was supported by density functional theory (DFT) studies. The compounds were thoroughly characterized by single crystal X‐ray diffraction, magnetic measurements, mass spectrometry and elemental analysis. To evaluate their suitability as precursors for deposition of Mn‐based materials, the thermal properties were investigated in detail. Mn(II) complexes possessing the most promising thermal properties, namely Bis(N,N’‐ditertbutylformamidinato)manganese(II) (IV) and Bis(4‐(isopropylamino)pent‐3‐en‐2‐onato)manganese(II) (ßIII) were used in reactivity studies with DFT to explore their interaction with oxidizing co‐reactants such as oxygen and water which will guide future CVD and ALD process development.
- 4 July 2024
- Published by Wiley in Chemistry – A European Journal
- Vol. 30 (45) , e202401275
Open AccessTargeting Manganese Amidinate and ß‐Ketoiminate Complexes as Precursors for Mn‐Based Thin Film Deposition
With a focus on Mn based organometallic compounds with suitable physico‐chemical properties to serve as precursors for chemical vapor deposition (CVD) and atomic layer deposition (ALD) of Mn‐containing materials, systematic synthetic approaches with ligand variation, detailed characterization, and theoretical input from density functional theory (DFT) studies are presented. A series of new homoleptic all‐nitrogen and mixed oxygen/nitrogen‐coordinated Mn(II) complexes bearing the acetamidinate, formamidinate, guanidinate and ß‐ketoiminate ligands have been successfully synthesized for the first time. The specific choice of these ligand classes with changes in structure and coordination sphere and side chain variations result in significant structural differences whereby mononuclear and dinuclear complexes are formed. This was supported by density functional theory (DFT) studies. The compounds were thoroughly characterized by single crystal X‐ray diffraction, magnetic measurements, mass spectrometry and elemental analysis. To evaluate their suitability as precursors for deposition of Mn‐based materials, the thermal properties were investigated in detail. Mn(II) complexes possessing the most promising thermal properties, namely Bis(N,N’‐ditertbutylformamidinato)manganese(II) (IV) and Bis(4‐(isopropylamino)pent‐3‐en‐2‐onato)manganese(II) (ßIII) were used in reactivity studies with DFT to explore their interaction with oxidizing co‐reactants such as oxygen and water which will guide future CVD and ALD process development.
- Open Access
- 3 April 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Synthesis, Structure, Thermal Properties and Reactivity Studies on Manganese Amidinates and ß-Ketoiminates Supported by DFT: Potential Precursors for Vapor Deposition of Mn-Based Thin Films
To identify Mn based organometallic compounds that serve as precursors for chemical vapor deposition (CVD) and atomic layer deposition (ALD) processes, systematic synthetic approaches with ligand variation, detailed characterization and theoretical input from density functional theory (DFT) studies were adopted. In this context, a series of new homoleptic all-nitrogen and mixed oxygen/nitrogen-coordinated Mn(II) complexes bearing the acetamidinate, formamidinate, guanidinate and ß-ketoiminate ligands have been successfully synthesized for the first time. The compounds were thoroughly characterized by single crystal X-ray diffraction, Evans NMR, mass spectrometry and elemental analysis. To evaluate their potential use as precursors for Mn-based materials, the thermal properties were investigated in detail. The specific choice of these ligand classes with changes in structure and coordination sphere and side chain variations result in significant structural differences whereby mononuclear and dinuclear complexes are formed. This was supported by density functional theory (DFT) studies. The most promising Mn(II) compounds in terms of the thermal properties, namely Bis(N,N´-ditertbutylformamidinato)manganese(II) and Bis(4-(isopropylamino)pent-3-en-2-onato)manganese(II) were used in reactivity studies with DFT to explore their interaction with oxidizing co-reactants such as oxygen and water which are relevant for CVD and ALD process development.
- 3 April 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessSynthesis, Structure, Thermal Properties and Reactivity Studies on Manganese Amidinates and ß-Ketoiminates Supported by DFT: Potential Precursors for Vapor Deposition of Mn-Based Thin Films
To identify Mn based organometallic compounds that serve as precursors for chemical vapor deposition (CVD) and atomic layer deposition (ALD) processes, systematic synthetic approaches with ligand variation, detailed characterization and theoretical input from density functional theory (DFT) studies were adopted. In this context, a series of new homoleptic all-nitrogen and mixed oxygen/nitrogen-coordinated Mn(II) complexes bearing the acetamidinate, formamidinate, guanidinate and ß-ketoiminate ligands have been successfully synthesized for the first time. The compounds were thoroughly characterized by single crystal X-ray diffraction, Evans NMR, mass spectrometry and elemental analysis. To evaluate their potential use as precursors for Mn-based materials, the thermal properties were investigated in detail. The specific choice of these ligand classes with changes in structure and coordination sphere and side chain variations result in significant structural differences whereby mononuclear and dinuclear complexes are formed. This was supported by density functional theory (DFT) studies. The most promising Mn(II) compounds in terms of the thermal properties, namely Bis(N,N´-ditertbutylformamidinato)manganese(II) and Bis(4-(isopropylamino)pent-3-en-2-onato)manganese(II) were used in reactivity studies with DFT to explore their interaction with oxidizing co-reactants such as oxygen and water which are relevant for CVD and ALD process development.
- Open Access
CVD Grown Tungsten Oxide for Low Temperature Hydrogen Sensing: Tuning Surface Characteristics via Materials Processing for Sensing Applications
The intrinsic properties of semiconducting oxides having nanostructured morphology are highly appealing for gas sensing. In this study, the fabrication of nanostructured WO3 thin films with promising surface characteristics for hydrogen (H2) gas sensing applications is accomplished. This is enabled by developing a chemical vapor deposition (CVD) process employing a new and volatile tungsten precursor bis(diisopropylamido)‐bis(tert‐butylimido)‐tungsten(VI), [W(NtBu)2(NiPr2)2]. The as‐grown nanostructured WO3 layers are thoroughly analyzed. Particular attention is paid to stoichiometry, surface characteristics, and morphology, all of which strongly influence the gas‐sensing potential of WO3. Synchrotron‐based ultraviolet photoelectron spectroscopy (UPS), X‐ray photoelectron spectroscopy (XPS), X‐ray photoelectron emission microscopy (XPEEM), low‐energy electron microscopy (LEEM) and 4‐point van der Pauw (vdP) technique made it possible to analyze the surface chemistry and structural uniformity with a spatially resolved insight into the chemical, electronic and electrical properties. The WO3 layer is employed as a hydrogen (H2) sensor within interdigitated mini‐mobile sensor architecture capable of working using a standard computer's 5 V 1‐wirebus connection. The sensor shows remarkable sensitivity toward H2. The high, robust, and repeatable sensor response (S) is attributed to the homogenous distribution of the W5+ oxidation state and associated oxygen vacancies, as shown by synchrotron‐based UPS, XPS, and XPEEM analysis.
Open AccessCVD Grown Tungsten Oxide for Low Temperature Hydrogen Sensing: Tuning Surface Characteristics via Materials Processing for Sensing Applications
The intrinsic properties of semiconducting oxides having nanostructured morphology are highly appealing for gas sensing. In this study, the fabrication of nanostructured WO3 thin films with promising surface characteristics for hydrogen (H2) gas sensing applications is accomplished. This is enabled by developing a chemical vapor deposition (CVD) process employing a new and volatile tungsten precursor bis(diisopropylamido)‐bis(tert‐butylimido)‐tungsten(VI), [W(NtBu)2(NiPr2)2]. The as‐grown nanostructured WO3 layers are thoroughly analyzed. Particular attention is paid to stoichiometry, surface characteristics, and morphology, all of which strongly influence the gas‐sensing potential of WO3. Synchrotron‐based ultraviolet photoelectron spectroscopy (UPS), X‐ray photoelectron spectroscopy (XPS), X‐ray photoelectron emission microscopy (XPEEM), low‐energy electron microscopy (LEEM) and 4‐point van der Pauw (vdP) technique made it possible to analyze the surface chemistry and structural uniformity with a spatially resolved insight into the chemical, electronic and electrical properties. The WO3 layer is employed as a hydrogen (H2) sensor within interdigitated mini‐mobile sensor architecture capable of working using a standard computer's 5 V 1‐wirebus connection. The sensor shows remarkable sensitivity toward H2. The high, robust, and repeatable sensor response (S) is attributed to the homogenous distribution of the W5+ oxidation state and associated oxygen vacancies, as shown by synchrotron‐based UPS, XPS, and XPEEM analysis.
- Open Access
- 19 June 2019
- Published by MDPI AG in Proceedings
- Vol. 14 (1) , 27
Monitoring Surface Stoichiometry, Work Function and Valance Band of Tungsten Oxide (WO3), Molybdenum Oxide (MoO3) and Tin Oxide (SnO2) Thin Films as a Function of Temperature and Oxygen Partial Pressure with Advanced Surface Sensitive Techniques for Chemical Sensing Applications
Atomic layer deposition (ALD) is a chemical vapor deposition (CVD) deposition method in which high-quality
- 19 June 2019
- Published by MDPI AG in Proceedings
- Vol. 14 (1) , 27
Open AccessMonitoring Surface Stoichiometry, Work Function and Valance Band of Tungsten Oxide (WO3), Molybdenum Oxide (MoO3) and Tin Oxide (SnO2) Thin Films as a Function of Temperature and Oxygen Partial Pressure with Advanced Surface Sensitive Techniques for Chemical Sensing Applications
Atomic layer deposition (ALD) is a chemical vapor deposition (CVD) deposition method in which high-quality