Jinlong He
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Jinlong He has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Jinjin Li
Research Institute of Natural Gas Technology, PetroChina Southwest Oil&Gasfield Company, Chengdu, China
2 shared publications - Chaoyue Yang
Research Institute of Natural Gas Technology, PetroChina Southwest Oil and Gasfield Company, Chengdu 401147, China
1 shared publication - Gang Xiong
Research Institute of Natural Gas Technology, PetroChina Southwest Oil & Gasfield Company, Chengdu 610213, China
1 shared publication - Honggang Chang
Research Institute of Natural Gas Technology, PetroChina Southwest Oil & Gasfield Company, Chengdu 610213, China
1 shared publication - Jingqiang Fu
National Energy R&D Center of High-Sulfur Gas Exploitation, Chengdu 610041, China
1 shared publication - Jingwen Xue
Research Institute of Natural Gas Technology, PetroChina Southwest Oil and Gasfield Company, Chengdu 401147, China
1 shared publication
Latest Publications
- Open Access
Generation of ZSM-5 Nanocrystallites and Their Assembly into Hierarchical Architecture in a Phase-Transfer Synthesis
A method of phase-transfer water/toluene synthesis was developed to fabricate mesocrystals of Zeolite Socony Mobil-5 (ZSM-5) that contain both meso-/micropores and nanometer crystallites. The construction of a hierarchical architecture from nanozeolites via oriented attachment growth was achieved by a simple phase-transfer water/toluene synthesis by minimizing classical atom-by-atom crystallization. This opens the way to the cheap, highly efficient engineering of zeolitic morphologies. The physicochemical properties of the crystal were revealed by powder X-ray diffraction (XRD), N2 physical adsorption, inductively coupled plasma atomic emission spectroscopy (ICP-AES), scanning electron microscopy (SEM), transmission electron microscopy (TEM), ammonia temperature-programmed desorption (NH3-TPD) and pyridine infrared spectroscopy (Py-IR), indicating that the material has a high specific surface area, mesopore volume and Lewis acid content. The hierarchical ZSM-5 exhibits a prolonged catalytic lifetime in dimethyl ether–methyl ether (DTO) conversion and enhanced selectivity for propylene owing to the enhanced structural properties. The method can be extended to the synthesis of other graded zeolites controlled by the crystallization process and produce crystals comprising traversing mesoporosity and ultrasmall crystallites that are crucial for mass transfer enhancement.
Open AccessGeneration of ZSM-5 Nanocrystallites and Their Assembly into Hierarchical Architecture in a Phase-Transfer Synthesis
A method of phase-transfer water/toluene synthesis was developed to fabricate mesocrystals of Zeolite Socony Mobil-5 (ZSM-5) that contain both meso-/micropores and nanometer crystallites. The construction of a hierarchical architecture from nanozeolites via oriented attachment growth was achieved by a simple phase-transfer water/toluene synthesis by minimizing classical atom-by-atom crystallization. This opens the way to the cheap, highly efficient engineering of zeolitic morphologies. The physicochemical properties of the crystal were revealed by powder X-ray diffraction (XRD), N2 physical adsorption, inductively coupled plasma atomic emission spectroscopy (ICP-AES), scanning electron microscopy (SEM), transmission electron microscopy (TEM), ammonia temperature-programmed desorption (NH3-TPD) and pyridine infrared spectroscopy (Py-IR), indicating that the material has a high specific surface area, mesopore volume and Lewis acid content. The hierarchical ZSM-5 exhibits a prolonged catalytic lifetime in dimethyl ether–methyl ether (DTO) conversion and enhanced selectivity for propylene owing to the enhanced structural properties. The method can be extended to the synthesis of other graded zeolites controlled by the crystallization process and produce crystals comprising traversing mesoporosity and ultrasmall crystallites that are crucial for mass transfer enhancement.
- Open Access
Research and Performance Evaluation on Selective Absorption of H2S from Gas Mixtures by Using Secondary Alkanolamines
Exploring new solvents for efficient acid gas removal is one of the most attractive topics in industrial gas purification. Herein, using 2-tertiarybutylamino-2-ethoxyethanol as an absorbent in a packed column at atmospheric pressure was examined for selective absorption of H2S from mixed gas streams. In the present work, the acid gas load, H2S absorption selectivity, acid gas removal ratio, amine solution regeneration performance, and corrosion performance were investigated through evaluating experiments absorbing H2S and CO2 by using methyldiethanolamine and 2-tertiarybutylamino-2-ethoxyethanol. The experimental results illustrate that the H2S absorption selective factors were 3.88 and 15.81 by using 40% methyldiethanolamine and 40% 2-tertiarybutylamino-2-ethoxyethanol at 40 °C, respectively, showing that 2-tertiarybutylamino-2-ethoxyethanol is an efficient solvent for selective H2S removal, even better than methyldiethanolamine. Based on the consideration of cost, we added 5% TBEE to 35% MDEA to form a blended aqueous solvent. To our satisfaction, the blended amine solvent obtained a 99.79% H2S removal rate and a 22.68% CO2 co-absorption rate, while using the methyldiethanolamine alone achieved a 98.33% H2S removal rate and a 23.52% CO2 co-absorption rate; the blended solvent showed better H2S absorption efficiency and selectivity. Taken together, this work provides valuable information for a promising alkanolamine for acid gas removal, and the preliminary study has found that the aqueous blend of methyldiethanolamine and 2-tertiarybutylamino-2-ethoxyethanol is an efficient solvent for selective H2S removal, which not only extends the application field for sterically hindered amines, but also opens up new opportunities in blended solvent design.
Open AccessResearch and Performance Evaluation on Selective Absorption of H2S from Gas Mixtures by Using Secondary Alkanolamines
Exploring new solvents for efficient acid gas removal is one of the most attractive topics in industrial gas purification. Herein, using 2-tertiarybutylamino-2-ethoxyethanol as an absorbent in a packed column at atmospheric pressure was examined for selective absorption of H2S from mixed gas streams. In the present work, the acid gas load, H2S absorption selectivity, acid gas removal ratio, amine solution regeneration performance, and corrosion performance were investigated through evaluating experiments absorbing H2S and CO2 by using methyldiethanolamine and 2-tertiarybutylamino-2-ethoxyethanol. The experimental results illustrate that the H2S absorption selective factors were 3.88 and 15.81 by using 40% methyldiethanolamine and 40% 2-tertiarybutylamino-2-ethoxyethanol at 40 °C, respectively, showing that 2-tertiarybutylamino-2-ethoxyethanol is an efficient solvent for selective H2S removal, even better than methyldiethanolamine. Based on the consideration of cost, we added 5% TBEE to 35% MDEA to form a blended aqueous solvent. To our satisfaction, the blended amine solvent obtained a 99.79% H2S removal rate and a 22.68% CO2 co-absorption rate, while using the methyldiethanolamine alone achieved a 98.33% H2S removal rate and a 23.52% CO2 co-absorption rate; the blended solvent showed better H2S absorption efficiency and selectivity. Taken together, this work provides valuable information for a promising alkanolamine for acid gas removal, and the preliminary study has found that the aqueous blend of methyldiethanolamine and 2-tertiarybutylamino-2-ethoxyethanol is an efficient solvent for selective H2S removal, which not only extends the application field for sterically hindered amines, but also opens up new opportunities in blended solvent design.
- Open Access
Modeling CO2, H2S, COS, and CH3SH Simultaneous Removal Using Aqueous Sulfolane–MDEA Solution
In this study, a rate-based absorption model coupled with an improved thermodynamic model was developed to characterize the removal of acid components (CO2 and H2S) and organic sulfur (COS and CH3SH) from natural gas with an aqueous sulfolane–MDEA solution. First, the accuracy of the thermodynamic model was validated by comparing the calculated partial pressure of CO2, H2S, and CH3SH with those of the experimental data reported in the literature. Then, the industrial test data were employed to validate the absorption model and the simulation results agreed well with the experimental data. The average relative errors of the removal rates of CO2, COS, and CH3SH are 3.3%, 3.0%, 4.1%, respectively. Based on the validated coupled model, the total mass transfer coefficient and mass transfer resistance of each solute component at different column positions were analyzed. The effects of the gas–liquid ratio, overflow weir height, and absorption pressure on the absorption performance of each component were studied, and the influence of the acid component concentration in the feed gas on the removal efficiency of methyl mercaptan (CH3SH) was also discussed. It is found that the improved absorption model can better characterize the absorption performance and be conducive to the optimal design of the absorber column.
Open AccessModeling CO2, H2S, COS, and CH3SH Simultaneous Removal Using Aqueous Sulfolane–MDEA Solution
In this study, a rate-based absorption model coupled with an improved thermodynamic model was developed to characterize the removal of acid components (CO2 and H2S) and organic sulfur (COS and CH3SH) from natural gas with an aqueous sulfolane–MDEA solution. First, the accuracy of the thermodynamic model was validated by comparing the calculated partial pressure of CO2, H2S, and CH3SH with those of the experimental data reported in the literature. Then, the industrial test data were employed to validate the absorption model and the simulation results agreed well with the experimental data. The average relative errors of the removal rates of CO2, COS, and CH3SH are 3.3%, 3.0%, 4.1%, respectively. Based on the validated coupled model, the total mass transfer coefficient and mass transfer resistance of each solute component at different column positions were analyzed. The effects of the gas–liquid ratio, overflow weir height, and absorption pressure on the absorption performance of each component were studied, and the influence of the acid component concentration in the feed gas on the removal efficiency of methyl mercaptan (CH3SH) was also discussed. It is found that the improved absorption model can better characterize the absorption performance and be conducive to the optimal design of the absorber column.