RSRicoveer Singh Shergill

Ricoveer Singh Shergill

*This is an algorithmically generated author record based on publicly available information.

Ricoveer Singh Shergill has a total of 7 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Improving Conductivity of Reduced Infill 3D‐Printed Electrodes Through Tuning Infill Pattern and Orientation

    by Rora Wisby, Ricoveer Singh Shergill, Chloe Miller, Bhavik Anil Patel

    3D printing has been shown to be a highly effective approach for the reproducible manufacturing of composite carbon electrodes. Various printing parameters have been effectively shown to enhance the electrochemical performance of 3D‐printed electrodes through reducing contact resistance; however, most of these studies have been conducted using 100% infill electrodes. Our study explored how the infill pattern and printing orientation can impact the electrochemical performance of reduced infill carbon black/polylactic acid (CB/PLA) electrodes. We printed 30% infill CB/PLA electrodes in linear, grid, triangle, and wiggle infill patterns in both horizontal and vertical orientations and evaluated the performance using cyclic voltammetry, conductivity imaging, and contact angle measurements. CB/PLA electrodes made using a grid infill pattern in horizontal orientation and a linear infill pattern with vertical orientation had the highest current and lowest difference between the anodic and cathodic peak potentials for an inner‐sphere redox probe. This study provides vital insight that the choice of infill pattern is important when printing in different orientations. The findings presented have significant implications on effective choice of printing parameters when crafting 3D‐printed electrodes and electronic components.


  • Open Access

    Influence of instrument parameters on the electrochemical activity of 3D printed carbon thermoplastic electrodes

    by Ricoveer Singh Shergill, Chloe L. Miller, Bhavik Anil Patel

    3D printing provides a reliable approach for the manufacture of carbon thermoplastic composite electrochemical sensors. Many studies have explored the impact of printing parameters on the electrochemical activity of carbon thermoplastic electrodes but limited is known about the influence of instrument parameters, which have been shown to alter the structure and mechanical strength of 3D printed thermoplastics. We explored the impact of extruder temperature, nozzle diameter and heated bed temperature on the electrochemical activity of carbon black/poly-lactic acid (CB/PLA) electrodes. Cyclic voltammetry and electrochemical impedance spectroscopy measurements were conducted using standard redox probes. The electrode surface and cross-section of the electrode was visualised using scanning electron microscopy. We found that using extruder temperatures of 230 °C and 240 °C improved the electrochemical activity of CB/PLA electrodes, due to an increase in surface roughness and a reduction in the number of voids in-between print layers. Nozzle diameter, heated bed temperature of different 3D printers did not impact the electrochemical activity of CB/PLA electrodes. However high-end printers provide improved batch reproducibility of electrodes. These findings highlight the key instrument parameters that need to be considered when manufacturing carbon thermoplastic composite electrochemical sensors when using 3D printing.


  • Open Access

    The Effects of Material Extrusion Printing Speed on the Electrochemical Activity of Carbon Black/Polylactic Acid Electrodes**

    by Ricoveer Singh Shergill, Bhavik Anil Patel

    Material extrusion printing process can make electrodes and electronic components at any geometry and has provided a reproducible approach towards the fabrication of conductive carbon thermoplastic composite parts. Printing parameters can have a significant influence on the conductivity of the printed part, however limited studies have focused on understanding the impact of printing parameters. Our study explored the influence of printing speed on the electrochemical activity of 3D printed carbon black/polylactic acid (CB/PLA) electrodes. We made CB/PLA at print speeds ranging from 20 to 100 mm/s and evaluated the performance of these electrodes using cyclic voltammetry and through imaging. Electrodes made using 60 mm/s printing speed had the greatest current and electron transfer kinetics. Electrodes made using higher and lower printing speeds were more resistive. This study is the first to demonstrate the significant impact that printing speed can have on the electrochemical activity of 3D printed CB/PLA electrodes. The implications of this study are important when defining the 3D printing manufacturing process of electrodes and electronic components.


  • 3D-printed electrochemical pestle and mortar for identification of falsified pharmaceutical tablets

    by Ricoveer S. Shergill, Anna Farlow, Fernando Perez, Bhavik A. Patel

    Falsified medicines and healthcare supplements provide a major risk to public health and thus early identification is critical. Although a host of analytical approaches have been used to date, they are limited, as they require extensive sample preparation, are semi-quantitative and/or are inaccessible to low- and middle-income countries. Therefore, for the first time, we report a simple total analysis system which can rapidly and accurately detect falsified medicines and healthcare supplements. We fabricated a poly-lactic acid (PLA) pestle and mortar and using a commercial 3D printer, then made carbon black/PLA (CB/PLA) electrodes in the base of the mortar using a 3D printing pen to make an electrochemical cell. The pestle and mortar were able to crush and grind the tablets into a fine powder to the same consistency as a standard laboratory pestle and mortar. Using melatonin tablets to characterise the device, the 3D-printed pestle and mortar was able to detect the concentration of melatonin in the presence of insoluble excipients. The calibration plot showed a linear response from 37.5 to 300 µg/mL, where the limit of detection was 7 µg/mL. Electrochemical treatment was able to regenerate the CB/PLA working electrode allowing for repeated use of the device. In a blinded study, the device was able to accurately determine falsified melatonin tablets with recovery percentages between 101% and 105%. This was comparable to HPLC measurements. Overall, these findings highlight that our 3D-printed electrochemical pestle and mortar is an accessible and effective total analysis system that can have the ability to identify falsified medicines and healthcare supplements in remote locations. Graphical abstract


  • Open Access

    Detection of falsified clopidogrel in the presence of excipients using voltammetry

    by Ricoveer Singh Shergill, Petra Kristova, Bhavik Anil Patel

    This manuscript highlights a voltammetric method for the determination of falsified clopidogrel using voltammetry without extensive sample preparation.