AZAlessandro Zimmaro

Alessandro Zimmaro

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Alessandro Zimmaro has a total of 51 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Large-Batch Testing Methodology for Compliance to Low Destructive SEE Cross-Sections in Accelerator Control Systems

    by Rudy Ferraro, Alessandro Zimmaro, Antonio Scialdone, Gilles Foucard, Giorgio Scognamiglio, Salvatore Danzeca

    The reliability of CERN control systems, including power converters, RF systems, and safety electronics, is essential for LHC operation. With the High-Luminosity LHC (HL-LHC) update, the increased radiation levels combined with very low tolerated system failure rates translate into extremely stringent upper-limit destructive SEE cross-sections. Ensuring compliance under these conditions is challenging due to the extremely low device cross-sections and the large number of potentially sensitive components per system. This paper presents a methodology that first derives part-level SEE cross-section targets from system-level requirements, taking into account operational conditions such as system failure rates and radiation levels at their installation locations. In a second stage, these part cross-sections are used to calculate large-batch test plans, determining the number of devices required to demonstrate compliance with the SEE targets. The tests are performed using a dedicated CHARM facility structure, designed to accommodate high-volume irradiations and to ensure compliance with very low cross-section requirements.

  • Radiation effects and System Level Testing : Application to Wireless Communications

    by Alessandro Zimmaro

    Effets des radiations et tests au niveau du système : Application to Wireless Communications: Les systèmes électroniques du CERN, tant dans l'accélérateur que dans les expériences, sont exposés aux environnements particuliers de rayonnement intense induits par les différents accélérateurs de particules. La capacité de ces systèmes à résister aux effets des rayonnements sur l'électronique est donc cruciale pour maintenir le bon fonctionnement des accélérateurs et atteindre les objectifs ambitieux de l'organisation. Pour garantir la fiabilité nécessaire, l'équipement électronique doit passer une série d'étapes de qualification qui constituent la procédure d'assurance de la dureté des rayonnements (RHA).La mise à niveau du Grand collisionneur de hadrons (LHC) prévue pour 2029 (LHC à haute luminosité (HL-LHC)) augmentera considérablement les niveaux de rayonnement auxquels les systèmes de l'accélérateur doivent résister. Dans ces conditions, il peut s'avérer complexe de mener à bien la procédure RHA tout en conservant les marges de conception des rayonnements du LHC actuellement utilisées et en utilisant des composants commerciaux prêts à l'emploi (COTS).L'objectif de cette recherche est d'améliorer la procédure existante de l'RHA pour répondre à ces nouveaux besoins. Les différentes étapes du processus sont examinées et les phases "Analyse de l'environnement de rayonnement" et "Test au niveau du système" sont identifiées comme pouvant être améliorées. À cette fin, un nouveau système de monitorage des rayonnements sans fil pour l'électronique est développé et présenté dans le cadre de ce travail. Grâce à ses capacités de déploiement plus rapides et plus efficaces dans l'accélérateur, ce projet de pointe vise à réduire l'incertitude de l'estimation offerte par la phase "Analyse de l'environnement de rayonnement". D'autre part, sa qualification offre la possibilité d'améliorer la phase "Test au niveau du système" grâce au développement de nouvelles lignes directrices et méthodologies de test au niveau du système. Ces nouvelles approches permettront d'améliorer le processus actuel d'analyse de l'environnement radiatif et d'obtenir des résultats plus fiables lors de l'exécution de la phase "Test au niveau du système".

  • Open Access

    Advancing Radiation Hardness Assurance at CERN: Improved HEH Sensor for Enhanced Radiation Monitoring and Reliability System Study

    by Alessandro Zimmaro, Rudy Ferraro, Salvatore Fiore, Giuseppe Lerner, Alessandro Masi, Salvatore Danzeca

    In the Large Hadron Collider (LHC), it is essential to provide repeatable High Energy Hadron (HEH) measurements with reduced uncertainty to accurately track HEH trends as a function of machine operations and tunnel configurations. This level of precision is crucial not only for understanding the machine’s behaviour, but also for defining radiation qualification requirements for systems installed in the accelerator. However, the CY62157EV30 (CY90), which is currently used as an HEH sensor in the RadMon system, exhibits significant variability in its measurements. This high uncertainty prevents effective trend identification, and safety margins of up to a factor of 10 should be applied when defining radiation requirements. By contrast, the CY62167GE30 (CY65) offers significantly lower intra-lot uncertainty and improved radiation performance, making it a promising alternative to the CY90. This work validates the measurements obtained using the CY65 and highlights the benefits its use would bring to the LHC and its operational reliability.

  • Open Access

    Design, Validation, and Characterization of CERN’s SpaceRadMon-NG CubeSat Payload for Space Radiation Monitoring Missions

    by Jasper Dijks, Alessandro Zimmaro, Enrico Chesta, Salvatore Danzeca, Rudy Ferraro, Ruben Garc´ıa Al´ıa, Panagiotis Gkountoumis, Alessandro Masi, Alessandra Menicucci, Jeffrey Prinzie

    Understanding and monitoring the space environment is of great importance for the design and development of space avionics. This is especially critical when employing radiationsensitive Commercial-Off-The-Shelf (COTS) components in space systems. This work presents the design, validation and characterization of the SpaceRadMon-NG radiation monitoring payload and its sensors, a modular system built around such components. The study covers the payload configuration and preparations for the RADIOX (RADiation effects during In Orbit flight eXperiment) mission, part of the SYNDEO-1 CubeSat. Unique methodologies were applied for radiation qualification, system-level validation and sensor characterization to ensure reliable operation in space. The payload features enhanced capabilities compared to the previous version, including improved resolution, power efficiency and system modularity. Mechanical and radiation tests confirmed system robustness, and a cross-section smaller than 8.58·10−12 cm2 was determined at a 95% confidence level. Sensor performance was excellent, with relative errors of 0.65% for the COTS Static Random Access Memory (SRAM) and 0.41% for the Floating Gate DOSimeter (FGDOS) compared to reference devices. A novel FGDOS characterization under simultaneous temperature cycling and irradiation confirmed the stability of its temperature coefficient and identified an effective compensation method using a radiationinsensitive reference sensor. This compensation approach can be extended to other radiation-sensitive components in space. With its successful validation in space-representative environments, the payload is ready for in-orbit demonstration, where it will measure the Total Ionizing Dose (TID) and High Energy Hadron (HEH) fluence in Low Earth Orbit (LEO).

  • Open Access

    RadMon: a versatile, integrated radiation monitoring system for accelerators and experiments electronics at CERN

    by S. Fiore, R. Ferraro, A. Zimmaro, S. Danzeca

    The RadMon system at CERN is a radiation monitoring solution designed for the accelerator complex and experimental areas, providing real-time, precise measurement of radiation levels impacting electronics. This paper presents the capabilities of the RadMon device, which measures Total Ionizing Dose (TID), Displacement Damage (DD) in silicon, High Energy Hadrons (HEH), and thermal neutron fluence. A distributed network of 500 RadMon units supports critical CERN infrastructure, offering enhanced resilience against radiation-induced failure, with a more than threefold improvement in system reliability over previous versions. The modular design accommodates remote, inaccessible locations, supporting diverse detector needs in challenging environments. Future upgrades focus on improving radiation and magnetic field tolerance, integrating IoT for wireless communication, and incorporating advanced dosimetry technologies, aligning the RadMon system with the rigorous demands of the upcoming High Luminosity LHC (HL-LHC) era.


  • Open Access

    COTS BJT Radiation Qualification Methodology for Highly Distributed Systems in Mixed-Field Environments

    by Gabriele Andreetta, Rudy Ferraro, Alessandro Zimmaro, Stefano Bonaldo, Alessandro Paccagnella, Yves Thurel, Alessandro Masi, Salvatore Danzeca

    Commercial-off-the-shelf Bipolar Junction Transistors (BJTs) are commonly used in critical radiation-tolerant electronic systems, making their radiation qualification essential to ensure compliance with project-specific radiation design requirements. Although the response of BJTs to radiation is well-documented, their sensitivity to Total Ionizing Dose (TID) and Displacement Damage (DD) can complicate their qualification for systems exposed to diverse radiation environments, such as high-energy particle accelerators. This work investigates the primary degradation mechanisms in various BJTs used in CERN electronics, where devices are exposed to neutron-rich and charged particle environments. This research supports the adaptation of qualification strategies, ensuring a more reliable prediction of BJT degradation in complex radiation environments. The paper also provides examples of system response estimations and highlights the impact of various degradation mechanisms, such as lot-to-lot variations, Enhanced Low Dose Rate Effects (ELDRS), and how the relative dominance of TID or DD effects can differently affect both system performance and the qualification process.


  • Open Access

    The CELESTA CubeSat In-Flight Radiation Measurements and Their Comparison With Ground Facilities Predictions

    by Andrea Coronetti, Alessandro Zimmaro, Rubén García Alía, Salvatore Danzeca, Alessandro Masi, Ivan Slipukhin, Alessio Amodio, Jasper Dijks, Paul Peronnard, Raffaello Secondo, et al.

    The CELESTA CubeSat has employed radiation monitors developed by the Conseil Europeeene pour la Recherche Nucleaire (CERN), used for measuring the radiation environment at accelerators, to measure the space radiation field in a medium-Earth orbit (MEO). The technology is based on three static random access memories (SRAMs) that are sensitive to single-event upsets (SEUs) and single-event latchups (SELs). The measurements were performed for the duration of 2 months. A statistically significant amount of SEUs and SELs were collected. No solar proton event effects were observed in the data during this period. The in-flight rates were compared with respect to estimations coming from the environmental space fluxes available in the Outil de Modelisation de l’Environmment Radiative Externe (OMERE) tool suite and ground facility measurements done with ions and protons. The analysis emphasizes the importance of employing more sophisticated satellite shielding models for the calculation of the fluxes reaching the detectors as well as the need to know accurately the proton energy threshold of the SEU cross section Weibull response of the devices. Both observations mainly arise from the peculiar spectral distribution of protons in this MEO peaking at 10-20 MeV, which differs from those of a low-Earth orbit environment.


  • Open Access

    Using Software Mitigation Schemes to improve the availability of IoT applications in harsh radiation environment

    by A. Zimmaro, R. Ferraro, J. Boch, F. Saigne, A. Masi, S. Danzeca

    The integration of IoT infrastructure in the context of particle accelerators promises numerous benefits (reduced costs and maintenance time, increased deployment). However, the use of microcontroller units (MCUs), typical of IoT systems, can potentially compromise future accelerator availability performances. This paper presents Software Mitigation Schemes (SMS) designed to improve the availability performance of MCU-based systems under radiation. Their effectiveness is demonstrated through a radiation test on a CERN Wireless IoT Radiation Monitoring system, also called BatMon. The results underline the IoT devices' feasibility as a viable solution for high-distribution systems in the High-Luminosity Large Hadron Collider (HL-LHC) or Future Circular Collider (FCC).


  • Open Access

    Testing and Validation Methodology for a Radiation Monitoring System for Electronics in Particle Accelerators

    by Alessandro Zimmaro, Rudy Ferraro, Jerome Boch, Frederic Saigne, Ruben Garcia Alia, Matteo Brucoli, Alessandro Masi, Salvatore Danzeca

    In this work, a methodology for the design and validation of a radiation monitoring (RadMON) system for electronic systems in particle accelerators is presented. The methodology expands the common radiation hardness assurance (RHA) procedure implemented at CERN, including new steps dedicated to both system-level testing, focused on a wireless device, and sensors characterization and readout validation. A case study demonstrating the validity of this methodology is proposed with the qualification of a novel battery-powered wireless RadMON system. This system not only represents the validation vehicle of the methodology but also an innovation in terms of monitoring platform due to its flexibility and improved capabilities. The application of this methodology allowed its full qualification, providing useful data in terms of resistance to radiation, lifetime, and failure rate in operation, demonstrating the validity of the testing strategy proposed in the article.


  • Open Access

    Proximeter CERN’s detecting device for personnel

    by Christoph Merscher, Rodrigo Sierra, Alessandro Zimmaro, Marco Giordano, Salvatore Danzeca

    He SARS COV 2 virus, the cause of the better known COVID-19 disease, has greatly altered our personal and professional lives. Many people are now expected to work from home but this is not always possible and, in such cases, it is the responsibility of the employer to implement protective measures. One simple such measure is to require that people maintain a distance of 2 metres but this places responsibility on employees and leads to two problems. Firstly, the likelihood that safety distances are not maintained and secondly that someone who becomes infected does not remember with whom they may have been in contact. To address both problems, CERN has developed the “proximeter”, a device that, when worn by employees, detects when they are in close proximity to others. Information about any such close contacts is sent securely over a Low Power Wide Area Network (LPWAN) and stored in a manner that respects confidentiality and privacy requirements. In the event that an employee becomes infected with COVID-19 CERN can thus identify all the possible contacts and so prevent the spread of the virus. We describe here the details of the proximeter device, the LPWAN infrastructure deployed at CERN, the communication mechanisms and the protocols used to respect the confidentiality of personal data.