Oksana Zakharchuk
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Oksana Zakharchuk has a total of 4 co-authors. Here are the top co-authors by number of shared publications:
- Miсhail Lubkov
Національний університет «Полтавська політехніка імені Юрія Кондратюка
3 shared publications - Oleksandr Petrash
Poltava State Agrarian University
2 shared publications - Viktoriia Dmytrenko
National University “Yuri Kondratyuk Poltava Polytechnic
2 shared publications Вікторія Дмитренко
1 shared publication
Latest Publications
- Open Access
- 15 December 2022
- Published by Yuri Kondratyuk Poltava Polytechnic in Збірник наукових праць Галузеве машинобудування будівництво/ Academic journal Industrial Machine Building Civil Engineering
- Vol. 1 (58) , 135-140
Improvement of well drainage radius calculation
The calculation of well drainage radius is improved on the example of Chervonozayarske gas field. Theoretical research methods are applied, which include a systematic analysis of the information used, numerical modeling based on the combined finite element-difference method, methods of visual representation of the information obtained, analytical methods To increase the accuracy of the calculation of the well drainage radius, the heterogeneity of the porous medium structure was taken into account. It is established that the drainage radius of a gas well expands with time. This allows to determine the optimal grid of production wells, the number and location of injection wells to ensure their interaction, and hence ¬ reduce material costs in the gas industry
- 15 December 2022
- Published by Yuri Kondratyuk Poltava Polytechnic in Збірник наукових праць Галузеве машинобудування будівництво/ Academic journal Industrial Machine Building Civil Engineering
- Vol. 1 (58) , 135-140
Open AccessImprovement of well drainage radius calculation
The calculation of well drainage radius is improved on the example of Chervonozayarske gas field. Theoretical research methods are applied, which include a systematic analysis of the information used, numerical modeling based on the combined finite element-difference method, methods of visual representation of the information obtained, analytical methods To increase the accuracy of the calculation of the well drainage radius, the heterogeneity of the porous medium structure was taken into account. It is established that the drainage radius of a gas well expands with time. This allows to determine the optimal grid of production wells, the number and location of injection wells to ensure their interaction, and hence ¬ reduce material costs in the gas industry
- Open Access
- 25 February 2022
- Published by Private Company Technology Center in Technology audit and production reserves
- Vol. 1 (1(63)) , 30-35
Gas reserves calculation based on the results of reservoir pressure distribution modeling
The object of this study is the gas-bearing layer B-26 of the Zakhidne-Radchenkivsʹke gas condensate field (Ukraine). A bottleneck in the process of exploration and experimental and industrial operation of the Zakhidne-Radchenkivsʹke gas condensate field was the ambiguous data on extractive reserves (values that were calculated by different authors range from 14 thousand to 424 million m3). At present, the field is mothballed, which is why the use of a new approach to calculating the initial gas reserves could be useful for deciding to start developing a single productive layer B-26. During the study, such theoretical research methods were used as the system analysis of the information used, numerical modeling based on the combined finite-element-difference method, the methods of visual representation of the information received, as well as analytical methods. The method of calculating gas reserves proposed in this work combines a volumetric method and the simulation of filtration processes using a combined finite-element-difference method. The latter makes it possible to take into consideration the structure of the reservoir, which is heterogeneous in terms of permeability, and to adequately, at the quantitative level, to describe the distribution of non-stationary reservoir pressure around the extractive well. By applying an analytical formula based on the values of average reservoir and downhole pressures, the radii of the well's feed circuit at different stages of the reservoir development have been calculated. Thus, the active area (and volume) of the reservoir can be determined, according to which the extractive reserves of the deposit are calculated. The mining reserves of the Zakhidne-Radchenkivsʹke field, estimated in this way, amount to 174 million m3 of gas. The method for calculating reserves proposed in this study could prove useful for deciding on the further development of the Zakhidne-Radchenkivsʹke gas condensate field. Combining the volumetric method with the results of modeling filtration processes is an operational method for calculating the reserves of the reservoir, opened by one mining well. In this case, the application of the combined finite-element-difference method makes it possible to take into consideration the complex heterogeneous structure of the reservoir and predict the distribution of reservoir nonstationary pressures around the extractive well. The current study that used the Zakhidne-Radchenkivsʹke gas condensate field in Ukraine as an example is interesting when calculating the reserves of layers of complex structure all over the world, whereby the productive reservoir is opened by a single mining well.
- 25 February 2022
- Published by Private Company Technology Center in Technology audit and production reserves
- Vol. 1 (1(63)) , 30-35
Open AccessGas reserves calculation based on the results of reservoir pressure distribution modeling
The object of this study is the gas-bearing layer B-26 of the Zakhidne-Radchenkivsʹke gas condensate field (Ukraine). A bottleneck in the process of exploration and experimental and industrial operation of the Zakhidne-Radchenkivsʹke gas condensate field was the ambiguous data on extractive reserves (values that were calculated by different authors range from 14 thousand to 424 million m3). At present, the field is mothballed, which is why the use of a new approach to calculating the initial gas reserves could be useful for deciding to start developing a single productive layer B-26. During the study, such theoretical research methods were used as the system analysis of the information used, numerical modeling based on the combined finite-element-difference method, the methods of visual representation of the information received, as well as analytical methods. The method of calculating gas reserves proposed in this work combines a volumetric method and the simulation of filtration processes using a combined finite-element-difference method. The latter makes it possible to take into consideration the structure of the reservoir, which is heterogeneous in terms of permeability, and to adequately, at the quantitative level, to describe the distribution of non-stationary reservoir pressure around the extractive well. By applying an analytical formula based on the values of average reservoir and downhole pressures, the radii of the well's feed circuit at different stages of the reservoir development have been calculated. Thus, the active area (and volume) of the reservoir can be determined, according to which the extractive reserves of the deposit are calculated. The mining reserves of the Zakhidne-Radchenkivsʹke field, estimated in this way, amount to 174 million m3 of gas. The method for calculating reserves proposed in this study could prove useful for deciding on the further development of the Zakhidne-Radchenkivsʹke gas condensate field. Combining the volumetric method with the results of modeling filtration processes is an operational method for calculating the reserves of the reservoir, opened by one mining well. In this case, the application of the combined finite-element-difference method makes it possible to take into consideration the complex heterogeneous structure of the reservoir and predict the distribution of reservoir nonstationary pressures around the extractive well. The current study that used the Zakhidne-Radchenkivsʹke gas condensate field in Ukraine as an example is interesting when calculating the reserves of layers of complex structure all over the world, whereby the productive reservoir is opened by a single mining well.
- 23 December 2021
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of the National Technical University "KhPI". Series: Chemistry, Chemical Technology and Ecology
- No. 2(6),p. 72-79
MODELING OF PRODUCING PRESSURE IN HETEROGENEOUS OIL-BEARING RESERVOIRS
Numerical modeling of the distribution of the reservoir pressure drop in the vicinity of an operating well was carried out taking into account the inhomogeneous distribution of filtration characteristics (permeability and oil viscosity) in the near and distant zones of the well operation in order to study the practical aspects of filtration in heterogeneous oil-bearing formations based on a combined finite-element-difference method for non-stationary problem of piezoconductivity. The use of the combined finite-element-difference method enables to combine the advantages of the finite-element method and the finite difference method: to model geometrically complex areas, to find the value at any point of the object under study, while the implicit difference scheme. It is shown that the intensity of filtration processes in the vicinity of the operating well depends mainly on the permeability, and, to a lesser extent, on the viscosity of the oil. Moreover, the influence of the permeability of the oil phase in the remote zone (Rd < 5 m) is greater than the effect in the close zone (Rd > 5 m) of the operating well. In the case of low permeability of the oil phase in the vicinity of the existing well, to maintain stable oil production, it is necessary to place an injection well near the production well. Using the method suggested, it is possible to predict the effect of the injection well on the formation pressure distribution in the formation. The scientific novelty of the work lies in the study of the influence of the heterogeneous permeability and oil viscosity distribution on the reservoir pressures distribution around the wells by modeling filtration processes based on a combined finite-element-difference method. The practical significance of the research results comes down to confirming the close relationship between the heterogeneity of the porous medium and the reservoir pressures distribution around an operating producing well. The combined finite-element-difference method used in this work can be used to solve other filtration problems (for example, to calculate the gas saturation of a reservoir, create a method for calculating well flow rates, assess the effect of injection wells on filtration processes).
- 23 December 2021
- Published by National Technical University Kharkiv Polytechnic Institute in Bulletin of the National Technical University "KhPI". Series: Chemistry, Chemical Technology and Ecology
- No. 2(6),p. 72-79
MODELING OF PRODUCING PRESSURE IN HETEROGENEOUS OIL-BEARING RESERVOIRS
Numerical modeling of the distribution of the reservoir pressure drop in the vicinity of an operating well was carried out taking into account the inhomogeneous distribution of filtration characteristics (permeability and oil viscosity) in the near and distant zones of the well operation in order to study the practical aspects of filtration in heterogeneous oil-bearing formations based on a combined finite-element-difference method for non-stationary problem of piezoconductivity. The use of the combined finite-element-difference method enables to combine the advantages of the finite-element method and the finite difference method: to model geometrically complex areas, to find the value at any point of the object under study, while the implicit difference scheme. It is shown that the intensity of filtration processes in the vicinity of the operating well depends mainly on the permeability, and, to a lesser extent, on the viscosity of the oil. Moreover, the influence of the permeability of the oil phase in the remote zone (Rd < 5 m) is greater than the effect in the close zone (Rd > 5 m) of the operating well. In the case of low permeability of the oil phase in the vicinity of the existing well, to maintain stable oil production, it is necessary to place an injection well near the production well. Using the method suggested, it is possible to predict the effect of the injection well on the formation pressure distribution in the formation. The scientific novelty of the work lies in the study of the influence of the heterogeneous permeability and oil viscosity distribution on the reservoir pressures distribution around the wells by modeling filtration processes based on a combined finite-element-difference method. The practical significance of the research results comes down to confirming the close relationship between the heterogeneity of the porous medium and the reservoir pressures distribution around an operating producing well. The combined finite-element-difference method used in this work can be used to solve other filtration problems (for example, to calculate the gas saturation of a reservoir, create a method for calculating well flow rates, assess the effect of injection wells on filtration processes).
- Open Access
- 12 October 2021
- Published by Private Company Technology Center in Technology audit and production reserves
- Vol. 5 (1(61)) , 33-40
Investigation of the influence of the heterogeneous permeability distribution on the oil phase displacement processes
The object of research is the filtration processes of displacement of the oil phase under the influence of an injection well in a heterogeneous porous medium. It is possible to evaluate and take into account the effect of reservoir heterogeneity on the distribution of reservoir pressure (and, consequently, on the intensity of the filtration process) using numerical modeling of filtration processes based on the piezoelectric equation. To solve the non-stationary anisotropic problem of piezoconductivity, it is proposed to apply the combined finite-element-difference method of M. Lubkov, which makes it possible to take into account the inhomogeneous distribution of permeability inside the anisotropic oil-bearing formation and at its boundaries, and to adequately calculate the distribution of reservoir pressure. The use of the combined finite-element-difference method allows to combine the advantages of the finite-element method and the finite difference method: to model geometrically complex areas, to find the value at any point of the object under study. At the same time, the use of an implicit difference scheme when finding the nodal values of the grid provides high reliability and convergence of the results. The simulation results show that the distribution of the pressure field between the production and injection wells significantly depends on their location, both in the isotropic landslide and in the anisotropic oil-bearing reservoir. It is shown that the distance between the wells of more than 1 km levels out the effectiveness of the impact of the injection well on the oil filtration process. The influence of the permeability of the oil phase in the shear direction dominates the influence of the permeability in the axial directions (affects the pressure decrease by 4–9.5 %). In the case of a landslide-isotropic reservoir, the wells should be located in the shear (diagonal) direction, which will provide the lowest level of drop in the average reservoir pressure (by 4 %). Based on the information obtained, for the effective use of anisotropic low-permeability formations, it is necessary to place production and injection wells in areas with relatively low anisotropy of the formation permeability, especially to avoid places with the presence of landslide permeability of the formation. The location of the wells is important so that, on the one hand, there is no blockage of oil from the side of reduced permeability, and on the other hand, rapid depletion of the formation from the side of increased permeability does not occur. And also the mutual exchange between the production and injection wells did not stop. When placing a system of production and injection wells in anisotropic formations of an oil field, it is necessary to carry out a systematic analysis of the surrounding anisotropy of the formations in order to place them in such a way that would ensure effective dynamics of filtration processes around these wells. Using the method used, it is possible to predict the impact of an injection well on the distribution of reservoir pressure in the reservoir.
- 12 October 2021
- Published by Private Company Technology Center in Technology audit and production reserves
- Vol. 5 (1(61)) , 33-40
Open AccessInvestigation of the influence of the heterogeneous permeability distribution on the oil phase displacement processes
The object of research is the filtration processes of displacement of the oil phase under the influence of an injection well in a heterogeneous porous medium. It is possible to evaluate and take into account the effect of reservoir heterogeneity on the distribution of reservoir pressure (and, consequently, on the intensity of the filtration process) using numerical modeling of filtration processes based on the piezoelectric equation. To solve the non-stationary anisotropic problem of piezoconductivity, it is proposed to apply the combined finite-element-difference method of M. Lubkov, which makes it possible to take into account the inhomogeneous distribution of permeability inside the anisotropic oil-bearing formation and at its boundaries, and to adequately calculate the distribution of reservoir pressure. The use of the combined finite-element-difference method allows to combine the advantages of the finite-element method and the finite difference method: to model geometrically complex areas, to find the value at any point of the object under study. At the same time, the use of an implicit difference scheme when finding the nodal values of the grid provides high reliability and convergence of the results. The simulation results show that the distribution of the pressure field between the production and injection wells significantly depends on their location, both in the isotropic landslide and in the anisotropic oil-bearing reservoir. It is shown that the distance between the wells of more than 1 km levels out the effectiveness of the impact of the injection well on the oil filtration process. The influence of the permeability of the oil phase in the shear direction dominates the influence of the permeability in the axial directions (affects the pressure decrease by 4–9.5 %). In the case of a landslide-isotropic reservoir, the wells should be located in the shear (diagonal) direction, which will provide the lowest level of drop in the average reservoir pressure (by 4 %). Based on the information obtained, for the effective use of anisotropic low-permeability formations, it is necessary to place production and injection wells in areas with relatively low anisotropy of the formation permeability, especially to avoid places with the presence of landslide permeability of the formation. The location of the wells is important so that, on the one hand, there is no blockage of oil from the side of reduced permeability, and on the other hand, rapid depletion of the formation from the side of increased permeability does not occur. And also the mutual exchange between the production and injection wells did not stop. When placing a system of production and injection wells in anisotropic formations of an oil field, it is necessary to carry out a systematic analysis of the surrounding anisotropy of the formations in order to place them in such a way that would ensure effective dynamics of filtration processes around these wells. Using the method used, it is possible to predict the impact of an injection well on the distribution of reservoir pressure in the reservoir.