DSDmytro Saveliev

Dmytro Saveliev

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Dmytro Saveliev has a total of 60 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Development of conditions for obtaining oil from sunflower oil hydration waste

    by Dmytro Saveliev, Vasyl Rotar, Mikhail Kravtsov, Olena Petrova, Alla Ziuzko, Natalia Shevchuk, Svitlana Velma, Anzhela Rozumenko, Viktor Demenko, Taras Samchenko

    The object of the study is the process of treatment of sunflower phosphatide concentrate using sodium chloride solution. Hydration is a stage of oil refining. The waste of the process is a phosphatide concentrate, the disposal of which is dangerous to the environment. The concentrate contains valuable components – oil and phosphatides. An important task is to separate these components for effective use in various industries. The process of extracting oil from phosphatide concentrate by hydration in the presence of sodium chloride solution was investigated. The influence of the concentrate treatment conditions on the oil yield was determined. A sample of concentrate according to SOU 15.4-37-212:2004 (CAS 3436-44-0) was used: mass fraction of moisture and volatile substances – 2.8 %, mass fraction of phosphatides – 41.5 %. The concentrate was treated with sodium chloride solution with a concentration of (5–20) %. The hydration time was 25 min., the temperature was 45 °C, and the mass ratio of the sodium chloride solution to the concentrate was 1:1. Conditions for the concentrate treatment were determined: the concentration of sodium chloride solution was 15 %, settling time was 5 hours. At the same time, the yield of oil was 86.9 %. The parameters of the extracted oil were determined: acid value 2.8 mg KOH/g, peroxide value 3.2 ½ O mmol/kg, mass fraction of moisture and volatile substances 0.12 %. According to these indicators, the extracted oil corresponds to first-grade unrefined unfrozen sunflower oil according to DSTU 4492. The mass fraction of phosphorus-containing substances in terms of stearooleolecithin was 1.7 %, which slightly exceeds the standard value. The research results make it possible to process hydration waste and obtain oil, which is a raw material for the products of many industries. This will help solve the problem of disposal of environmentally hazardous waste and improve the state of the environment

  • Підвищення рівня безпеки людей під час повітряної тривоги

    by Stanislav Shakhov, Stanislav Vinogradov, Andrii Melnychenko, Dmytro Saveliev, Valeria Semkiv

    Об’єктом дослідження є тривалість евакуації у разі повітряної тривоги до укриття на прикладі об’єкта з масовим перебуванням людей, що розміщений у прифронтовому регіоні. Незважаючи на значну кількість досліджень присвячених евакуації, переважна частина з них розглядалась саме при виникненні пожеж. Відповідно до цього надавались рекомендації щодо підвищення ефективності евакуації за допомогою різноманітних способів. Але досі не розглядалось питання тривалості руху людей до укриття під час ракетної загрози за сигналом повітряна тривога. Розроблено 3-D модель будівлі, що розташована в прифронтовому регіоні відповідно до об’ємно-планувальних рішень. Проаналізовано джерела відкритої інформації щодо кількості обстрілів регіону, де знаходиться об’єкт. Станом на кінець 2023 року зареєстровано 47 випадків. Середній час підльоту ракет до міста, де розміщено об’єкт, складає 30–40 с. Згідно з цим встановлено критерії безпечного часу, що необхідний для досягнення укриття. При розміщенні людей на 1–6 му поверсі тривалість евакуації до укриття становить 92,8 с, при швидкості руху 1,66 м/с. У цьому випадку лише 33 %, а саме 40 людей встигають дістатися укриття за 40 с. Решті 67 %, а саме 81 людини необхідно ще 52,8 с, щоб встигнути дістатися безпечного місяця у разі загрози ракетної небезпеки під час сигналу повітряна тривога. Оптимізовано місця розміщення людей у приміщеннях об'єкта з масовим перебуванням людей та надано рекомендації щодо швидкості руху до укриття. Належне забезпечення своєчасної евакуації залежить від швидкості руху та місця знаходження людей на поверхах будівлі. Для даного об’єкту оптимальним рішенням, яке забезпечує збереження життя 95 % людей від загальної кількості є негайний відгук на сигнал тривоги, заборона розміщення людей вище за 1 поверх, та рух зі швидкістю не менше ніж 8 км/год.

  • Open Access

    Improving the technology of waxes obtaining from oil and fat waste

    by Dmytro Saveliev, Olena Petrova, Pavlo Kovalov, Oleksandr Cherkashyn, Natalia Shevchuk, Nataliia Markova, Alla Ziuzko, Mykola Pidhorodetskyi, Anatolii Rozumenko, Oleksandr Ivashchuk

    The object of the research is the extraction of waxes from the waste of the oil and fat industry – spent perlite. As a result of oil winterization, a significant amount of spent filter powders is formed, the disposal of which poses a danger to the environment. At the same time, winterization waste contains a significant amount of oil and wax, which are important components of many types of products. Oil and wax extraction involves the use of volatile, fire-hazardous solvents. An urgent task is to develop new safe and effective technologies for obtaining oils and waxes from winterization waste. The technology of extracting waxes from spent perlite, obtained as a result of winterization of sunflower oil, which involves treatment of perlite with sodium chloride solution, was investigated. Perlite was used according to SOU 15.4-37-210:2004 (CAS Number 93763-70-3) with indicators: mass fraction of fat – 20.1 %, peroxide value – 19.5 ½ O mmol/kg, acid value – 3.5 mg KOH/g. The temperature of mass settling after treatment with sodium chloride is 20 °C, the duration – 10 hours. The following rational conditions for perlite processing using sodium chloride were determined: the concentration of dry sodium chloride (by weight of perlite) – 35.0 %, the duration of mass boiling – 30 minutes. Under these conditions, the experimental value of the saponification value of the obtained wax was 120.5 mg KOH/g. Wax quality indicators: melting point 71.5 °C, acid value 1.6 mg KOH/g, mass fraction of moisture 0.63 %. The obtained results make it possible to obtain high-quality waxes from the waste of the oil and fat industry using a safe and affordable substance (sodium chloride). This will make it possible to avoid the need for waste disposal and increase the profitability of oil and fat enterprises due to obtaining valuable products from production waste

  • An algorithm of optimal distribution of equipment for fire stations

    by Oleksii Basmanov, Dmytro Saveliev, Roman Melezhyk, Tatiana Lutsenko

    The object of the study is the process of functioning of fire stations, and the subject of the study is the distribution of equipment between units serving a certain area. An algorithm of the optimal distribution of equipment for fire stations was built. In practice, it opens up opportunities to reduce the time it takes for firefighting units to reach the place of call by changing the service areas of the units. The model is based on the assumption of the sufficiency of forces and means in fire stations to carry out rescue operations and eliminate fires in the area of their service. The model is based on the division of the entire area of responsibility into separate sub-areas or the selection of individual objects for which a list of possible emergency situations related to fires, their frequency, forces and means necessary for their elimination is known. The task of optimally determining the area of responsibility of rescue units is formulated. The optimization criterion is the minimum time for units to follow from the location to the place of call. The objective function includes both the follow-up time and the number of units of equipment involved in eliminating the accident. This allows you to take into account the complexity of the emergency situation, since more complex situations will require the involvement of a larger number of equipment and units. The limitations of the task are determined by the available forces and means in operational and rescue units. An algorithm for the optimal distribution of equipment between existing operational and rescue units has been built. It is shown that the domain of admissible solutions is convex. The built model can be used to determine the service areas of already existing fire stations, as well as when choosing the locations of additional fire stations.

  • Open Access

    Improving the technology of the synthesis of fatty acid monoglycerides using the glycerolysis reaction

    by Dmytro Saveliev, Olena Petrova, Oleksandr Yashchenko, Serhii Rudakov, Serhii Harbuz, Natalia Shevchuk, Tetiana Kachanova, Michael Gill, Nataliia Bolhova, Nataliia Borozenets

    The object of research is the process of fat glycerolysis in order to obtain fatty acid monoglycerides. Monoglycerides are an important component of chemical, pharmaceutical, cosmetic, and food industry products. These substances are used as emulsifiers, structure formers, complex formers, etc. The industrial production of monoglycerides involves the use of complex technologies, as well as dangerous and unstable catalysts. An urgent task is to develop new catalysts and improve technologies for monoglycerides obtaining. The technology for the synthesis of monoglycerides by the glycerolysis method, which involves the reaction of vegetable hydrogenated fat with glycerol, was studied. Potassium glyceroxide was used as a catalyst, which is effective and safe in terms of production and use. Hydrogenated unrefined fat according to DSTU 5040 (CAS Number 68334-28-1) was used. The fat has non-standard parameters: the melting point is 51 °C, the mass fraction of moisture and volatile substances is 0.3 %, the acid value is 3.2 mg KOH/g, the peroxide value is 7.6 ½ O mmol/kg. The process duration was 90 minutes, the glycerol concentration was 50 %. Rational conditions for glycerolysis were determined: catalyst concentration (1.5 %) and temperature (140 °C). Under these conditions, the product ensured the stability of the “water – sunflower oil” emulsion of 96.8 %, the concentration of monoglycerides in the system was 0.1 %. Product parameters: mass fraction of monoglycerides – 72.5 %, free glycerol – 1.5 %, acid value – 1.7 mg KOH/g. The research results make it possible to improve the glycerolysis process using a new catalyst and obtain monoglycerides with high emulsifying ability. This will increase the profitability of the enterprise and increase the volume of production of high-quality monoglycerides for various industries


  • Особливості методів моделювання швидкості тепловиділення у FIRE DYNAMICS SIMULATOR

    by Stanislav Vinogradov, Stanislav Shakhov, Dmytro Saveliev, Andrii Melnychenko, Oleksandr Polivanov

    Виявлено особливості методів моделювання швидкості тепловиділення у Fire Dynamic Simulator. Порівняно зміну швидкості тепловиділення у часі в залежності від методу моде-лювання та практично реалізовано методи на прикладі типового приміщення для виявлення впливу швидкості тепловиділення на розвиток небезпечних чинників пожежі. Під час засто-сування Fire Dynamic Simulator для дослідження небезпечних чинників у повному обсязі не зрозуміло, яке значення швидкості тепловиділення слід використовувати при вивченні ди-наміки розвитку пожежі, що впливає на оцінювання отриманих результатів. Виявлення осо-бливостей кожного з методів надасть змогу ефективно застосовувати їх з метою забезпе-чення рівня пожежної безпеки. В результаті порівняння зміни швидкості тепловиділення у часі в залежності від методу моделювання розроблено класифікацію методів моделювання. Під час практичної реалізації методів на прикладі типового приміщення встановлено, що при застосуванні першого метода моделювання у порівнянні з другим, підвищення темпе-ратури нарізних інтервалах часу зростає швидше у 1,5–3 рази відповідно. Під час аналізу втрати видимості, встановлено, що при використанні сталої швидкості тепловиділення зни-ження видимості на різних інтервалах часу досягається швидше, ніж при швидкість тепло-виділення, яка змінюється у часі, відповідно у 1,6–3 рази. Під час аналізу зниження концен-трації кисню встановлено, що при застосуванні першого методу моделювання, значення концентрації кисню у повітрі знижується у 1,2–1,6 разів швидше на різних інтервалах часу у порівнянні з показниками другого методу. Завдяки виявленим особливостям кожного з методів моделювання розроблені рекомендації щодо їх використання у Fire Dynamic Simulator. Це надає змогу ефективно застосовувати методи та проводити оцінку результатів з прийняттям подальших рішень для забезпечення належного рівня пожежної безпеки.


  • Open Access

    Development of technology for obtaining fat compositions with increased oxidative stability

    by Dmytro Saveliev, Oleksandr Hryhorenko, Evgeniia Mykhailova, Mikhail Kravtsov, Oleg Kostyrkin, Anatolii Nikitin, Valentyn Romaniuk, Oleksandr Smolkov, Ivan Meshcheriakov, Volodymyr Bahlai

    The object of research is the process of fat oxidation at elevated and standard temperatures. Fats are used in chemical, pharmaceutical, food and other industries. Oxidative deterioration changes the composition of fats, reduces the efficiency of chemical reactions involving fats and the quality of final products. An urgent task is to increase the oxidative stability of fats. The oxidative stability of fat compositions based on rapeseed, high-oleic sunflower and palm oils by the induction period at a temperature of 110 °C was investigated. The induction periods of the initial oils were 408.48 min., 795.87 min. and 630.2 min., respectively. Rational ratios of oils in the compositions were found: high-oleic sunflower: palm (50:50) %; rapeseed: high-oleic sunflower: palm (16.67:66.67:16.67) %; rapeseed: high-oleic sunflower: palm (33.33:33.33:33.33) %. The induction periods of the mixtures are 650.57 min., 710.56 min. and 670.56 min., respectively. The increase in the oxidative stability of the developed compositions using the mixture of synthetic antioxidants (butylhydroxyanisole, butylhydroxytoluene and tert-butylhydroquinone) in an amount of 300 mg/kg of fat mixture was studied. The induction periods of the developed compositions were 910.80 min., 1279.01 min. and 1072.90 min., respectively. The physicochemical parameters of compositions with the addition of antioxidants after 5 months of storage at a temperature of (20±2) °C were determined. The peroxide values of the compositions were 5.65; 3.28; 4.50 ½ O mmol/kg, respectively. The research results make it possible to produce fats with increased oxidative stability and necessary properties, to predict induction periods of fat compositions depending on the concentrations of components. This will increase the profitability of production and the quality of fats obtained


  • Open Access

    ANALYSIS OF FOREIGN EXPERIENCE REGARDING CALCULATION OF SAFE EVACUATION TIME

    by National University of Civil Protection of Ukraine, Stanislav Vinogradov, Stanislav Shakhov, Dmytro Saveliev, Daryna Karpova, Станіслав Шахов, Дмитро Савельєв

    The study identified the differences between approaches to calculating the safe evacuation time in DSTU 8828: 2019 and experience in the US and EU countries.Thus, the significant difference between the PD 7974-6: 2004 and DSTU is the following: attention is paid to the start of the movement, which consists of the time of detection, time of the alert, the time of recognition of the alert signal, and the time of response to the alert signal; The calculation of time before the beginning of movement takes into account such components as the type of building, level of management, time of operation of the alert system, and the condition of the evacuated people, in particular, DSTU does not take into account the "level of management" at all; A variety of parameters is proposed to choose the time of evacuation, through which modeling can reproduce the script, approached to the real one.CFPA-E Guideline No 19: 2009 F from DSTU has the following differences: it is proposed to use the HHR parameter when selecting a fire that reflects a real picture of fire development; taking into account open or closed doors in the premises of the building that can be implemented, the help of modern software in modeling; Attention is paid to the calculation of the start time of the evacuation, with the proposed input data that take into account the type of alert system, the configuration of the building, the condition of the people, and the level of management.The methodology of the SFPE modeling approach is significantly different from DSTU in the following: when choosing an evacuation scenario, significant attention is paid to physiological, communicative and social components that will be used in the model; For each specific scenario, it is proposed to draw up an indental matrix, taking into account the characteristics; The use of software products with different features, including models with artificial intelligence for behavior, is proposed.

  • Open Access

    Development of rational technology for sodium glyceroxide obtaining

    by Mykola Korchak, Olga Bliznjuk, Serhii Nekrasov, Tatiana Gavrish, Olena Petrova, Natalia Shevchuk, Liudmyla Strikha, Oleg Kostyrkin, Evgeny Semenov, Dmytro Saveliev

    The process of sodium glyceroxide obtaining by the reaction of glycerol and sodium hydroxide in the form of an aqueous solution was investigated. Glycerol salts (metal glyceroxides) are important components in the synthesis of many compounds. Glyceroxides are used in the chemical industry, construction, medical practice, etc. Glyceroxides of alkali metals are used in the production of modified fats and biodiesel fuel. P.a.-grade glycerol (CAS Number 56-81-5) was used with a mass fraction of the main substance of 99.5 %. The parameters of sodium hydroxide (CAS Number 1310-73-2) were studied: the mass fraction of the main substance is 98.0 %, the mass fraction of sodium carbonate is 0.5%. Rational conditions for sodium glyceroxide obtaining were determined: temperature (145 °C) and concentration of sodium hydroxide solution (65 %). Under these conditions, the mass fraction of the main substance in the product was 80 %. The melting point (72 °C) and mass fraction of moisture (0.3 %) in sodium glyceroxide were determined. The catalytic activity of the product in the process of transesterification of palm olein was tested. The increase in the melting point of palm olein was 15 °C. Under similar conditions of using potassium glyceroxide with a mass fraction of the main substance of 75.77 %, the increase in the melting point is 12.1 °C. This indicates an increase in the efficiency of the transesterification process using sodium glyceroxide obtained by the developed technology. The research results make it possible to produce sodium glyceroxide under rational conditions with a high mass fraction of the main substance at enterprises that use metal glyceroxides as a production component or commercial product. The determined rational conditions will make it possible to effectively use the company's resources and predict the quality of the final product