Improving the technology of waxes obtaining from oil and fat waste
Authors:
- Dmytro SavelievDSDmytro Saveliev
- Olena PetrovaOPOlena Petrova
- Pavlo KovalovPKPavlo Kovalov
- Oleksandr CherkashynOCOleksandr Cherkashyn
- Natalia ShevchukNSNatalia Shevchuk
- Nataliia MarkovaNMNataliia Markova
- Alla ZiuzkoAZAlla Ziuzko
- Anatolii RozumenkoARAnatolii Rozumenko
- Oleksandr IvashchukOIOleksandr Ivashchuk
Open Access
- 22 December 2023
- journal article
- research article
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 6 (6 (126)) , 17-22
Abstract
The object of the research is the extraction of waxes from the waste of the oil and fat industry – spent perlite. As a result of oil winterization, a significant amount of spent filter powders is formed, the disposal of which poses a danger to the environment. At the same time, winterization waste contains a significant amount of oil and wax, which are important components of many types of products. Oil and wax extraction involves the use of volatile, fire-hazardous solvents. An urgent task is to develop new safe and effective technologies for obtaining oils and waxes from winterization waste. The technology of extracting waxes from spent perlite, obtained as a result of winterization of sunflower oil, which involves treatment of perlite with sodium chloride solution, was investigated. Perlite was used according to SOU 15.4-37-210:2004 (CAS Number 93763-70-3) with indicators: mass fraction of fat – 20.1 %, peroxide value – 19.5 ½ O mmol/kg, acid value – 3.5 mg KOH/g. The temperature of mass settling after treatment with sodium chloride is 20 °C, the duration – 10 hours. The following rational conditions for perlite processing using sodium chloride were determined: the concentration of dry sodium chloride (by weight of perlite) – 35.0 %, the duration of mass boiling – 30 minutes. Under these conditions, the experimental value of the saponification value of the obtained wax was 120.5 mg KOH/g. Wax quality indicators: melting point 71.5 °C, acid value 1.6 mg KOH/g, mass fraction of moisture 0.63 %. The obtained results make it possible to obtain high-quality waxes from the waste of the oil and fat industry using a safe and affordable substance (sodium chloride). This will make it possible to avoid the need for waste disposal and increase the profitability of oil and fat enterprises due to obtaining valuable products from production wasteKeywords
This publication has 15 references indexed in Scilit:
- Sunflower waxes as natural structuring agents to improve the technological properties of water-in-oil (W/O) high internal phase emulsions (HIPEs)Journal of Food Engineering, 2023
- Assessment of physicochemical, functional, thermal, and phytochemical characteristics of refined rice bran waxFood Chemistry, 2022
- Optimization of supercritical CO2 extraction by response surface methodology, composition analysis and economic evaluation of bamboo green waxJournal of Cleaner Production, 2022
- A Simplified Method for Fractionation and Analysis of Waxes and Oils from Sorghum (Sorghum bicolor (L.) Moench) BranJournal of the American Oil Chemists' Society, 2019
- Sunflower wax recovered from oil tank settlings: Revaluation of a waste product from the oilseed industryJournal of the Science of Food and Agriculture, 2019
- Optimisation and economic evaluation of the supercritical carbon dioxide extraction of waxes from waste date palm (Phoenix dactylifera) leavesJournal of Cleaner Production, 2018
- A green analytical chemistry approach for lipid extraction: computation methods in the selection of green solvents as alternative to hexaneAnalytical and Bioanalytical Chemistry, 2017
- Analysis of sorghum wax and carnauba wax by reversed phase liquid chromatography mass spectrometryIndustrial Crops and Products, 2017
- Characterization of waxes and residual oil recovered from sunflower oil winterization wasteEuropean Journal of Lipid Science and Technology, 2016
- Phase Behavior of Binary Blends of Four Different WaxesJournal of the American Oil Chemists' Society, 2016