ASAmangeldy Satybaldin

Amangeldy Satybaldin

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Amangeldy Satybaldin has a total of 34 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Determination of kinetic and thermodynamic parameters of oil sludge hydrogenation over a Ni/zeolite catalyst using a phenanthrene–naphthalene model mixture

    by Moldir Duisenbayeva, Amangeldy Satybaldin, Beken Zhandybaev, Alfiya Khalitova, Murzabek Baikenov, Sabyrzhan Imanbayev, Gulnur Alpyssova, Zamzagul Aitpayeva

    The object of the study is the process of catalytic hydrogenation of oil sludge and its binary model mixture (phenanthrene-naphthalene) over a synthesized Ni/zeolite catalyst, aimed at increasing the yield of light and medium distillate fractions from oil sludge. The kinetic and thermodynamic regularities of this process, as well as the effect of catalyst loading on the ratio of hydrogenation to isomerization products, remain insufficiently studied, limiting the selection of rational operating conditions for oil sludge processing. A kinetic model of reversible hydrogenation of oil sludge was developed for temperatures of 653, 673, and 693 K, which made it possible to determine the rate constants for direct (k1 = 0.1398 – 0.1604 min–1) and reverse (k2 = 0.0151 – 0.0287 min-1) reactions. Enthalpy (ΔH = –37.0 kJ/mol) and entropy (ΔS = 53.5 J/(mol·K) were calculated based on the temperature dependence of the equilibrium constant reactions confirming its moderately exothermic nature. An increase in the catalyst loading contributed to both hydrogenation and isomerization, with the greatest variety of isomerization products observed at 0.6–0.8 wt.%. The results of the equilibrium kinetic analysis of oil sludge hydrogenation led to the conclusion that the mechanism of separation of fractions from oil sludge at temperatures up to 300°C is complex due to the possible transition from kinetic to diffusion regime. The obtained parameters provide a reliable basis for the development and expansion of catalytic technologies for the disposal of oil sludge, and the proposed equilibrium-kinetic analysis (EKA) approach is applicable to other heavy hydrocarbon wastes of similar composition, providing a basis for selecting the optimal temperature and catalyst loading in industrial-scale processing

  • ЖВҚИР ҚОНДЫРҒЫСЫНЫҢ РАЗРЯДТЫҚ КЕРНЕУІНІҢ МҰНАЙ ШЛАМЫНЫҢ ЖЕҢІЛ ЖӘНЕ ОРТА ФРАКЦИЯЛАРЫНЫҢ ШЫҒЫМЫНА ӘСЕРІ

    by А.ж. Сатыбалдин, К.м. Шаймерденова, Г.к. Алпысова, С.ж. Накипова, Р. Сейтжан

    Бұл жұмыста Атасу-Алашанькоу мұнай айдау құбырының ішкі бетінде түзілген мұнай шламын жоғары вольтты қысқа импульсті электрогидравликалық разряд әдісі арқылы қайта өңдеу процесін зерттеу нәтижелері келтірілген. Негізгі электрофизикалық параметрлердің - разрядтық кернеудің, конденсатор батареясының сыйымдылығының, өңдеу ұзақтығының, ауа электродтары арасындағы қашықтықтың және катализатор қоспасының мұнай шламынан алынатын жеңіл және орташа фракциялар шығымына әсері жан-жақты зерттелді. Зерттеу нәтижелері көрсеткендей, фракция шығымының ең жоғары мәні 36,4 %-ға дейін артатыны анықталды. Никель жалатылған цеолит катализаторының жоғары молекулалы қосылыстардың деструкциясын арттыратыны және электрофизикалық параметрлердің оңтайлы мәндерін таңдау процестің энергия тиімділігін ұлғайтатыны анықталды. Алынған нәтижелер мұнай қалдықтарын қайта өңдеудің және кәдеге жаратудың энергия үнемді технологияларын жетілдіру үшін негіз бола алады. Сонымен қатар, зерттеу барысында алынған мәліметтер электрогидравликалық әсердің физика-химиялық механизмдерін терең түсінуге мүмкіндік береді және болашақта катализатор құрамын жетілдіру мен өңдеу параметрлерін оңтайландыру бағытында қолдануға болады. Жүргізілген зерттеу нәтижелері экологиялық қауіпсіз және энергия тиімді технологияларды өнеркәсіптік деңгейде енгізудің әлеуетін көрсетеді. Бұл өз кезегінде мұнай өндіру және қайта өңдеу салаларында технологияларды дамытуға жол ашады. Кілтті сөздер: мұнай шламы, нанокатализатор, жоғары вольтты қысқа импульсті электрогидравликалық разряд (ЖВҚИР), жеңіл және орташа фракциялар

  • Open Access

    Identifying the effect of the temperature regime of a heat generating unit on the efficiency of the electrohydroimpulse degreasing of organic materials

    by Bekbolat Nussupbekov, Мoldir Duisenbayeva, Yerlan Oshanov, Amangeldy Satybaldin, Raikhan Turlybekova

    The object of the study is to processing of organic waste using less energy-consuming technologies. This article discusses the issues of improving energy conversion methods aimed at efficient processing of organic waste using less energy-consuming technologies. Shock waves and local micro sources of high temperatures and pressures destroy cellular and intercellular structures of organic material. In the course of experimental work, it was found that the effective isolation of valuable components from waste organic material depends on the discharge voltage and the capacity of the storage capacitor. During operation, the optimal temperature of the working medium was set in the range of 36−50°C and the maximum product yield was observed at an energy in the range of 120−240 J on the switching device. The maintenance of this temperature range is provided by a hydrodynamic installation, which creates a constant and uniform heating of the working cell of the electrohydroimpulse installation. Due to intensive hydrodynamic processes such as turbulence, cavitation, and local pressure drops, heat is distributed evenly, which ensures efficient processing of organic materials and process stability. The triglyceride fraction is an indispensable source of raw materials not only in the food industry, but also for medicine, construction, and industry (for lubricating machine parts and measuring instruments)

  • Open Access

    INVESTIGATION OF THE EFFECT OF ELECTROPHYSICAL PARAMETERS OF THE HIGH-VOLTAGE SHORT-PULSE ELECTROHYDRAULIC DISCHARGE SYSTEM AND A NANOCOMPOSITE CATALYST ON OIL SLUDGE DESTRUCTION

    by A.ZH. Satybaldin, K.M. Shaimerdenova, B.B. Zhandybaev, A.A. Bakibaev, G.K. Alpyssova, R. Seitzhan, S. Tyanakh

    This paper presents the results of a study on oil sludge processing using high-voltage short-pulse electrohydraulic discharge. The influence of key parameters, such as discharge voltage, capacitor bank capacitance, processing time, electrode gap, and catalyst concentration, on the yield of light and medium petroleum fractions is analyzed. Experiments have shown that the optimal conditions for achieving the maximum fraction yield (up to 36.4%) are: a processing time of 6 minutes, an electrode gap of 10 mm, a capacitor bank capacitance of 0.125 μF, and a nanocomposite catalyst concentration of 1%. It has been established that the use of a catalyst enhances the destruction of high-molecular compounds, while optimization of the electrophysical parameters improves the energy efficiency of the process. The obtained results can be used to develop energy-efficient technologies for oil waste disposal.

  • ВЛИЯНИЕ НАНОКАТАЛИЗАТОРА И ВКЭГР НА ВЫХОД ФРАКЦИЙ ИЗ НЕФТЕШЛАМА

    by А. Ж. Сатыбалдин, К. М. Шаймерденова, М. И. Байкенов, Б. Б. Жандыбаев, С. Тянах

    Проведено исследование переработки нефтешламов в легкие и средние фракции с использованием высоковольтного короткоимпульсного электрогидравлического разряда (ВКЭГР). Актуальность работы обусловлена растущими объёмами нефтешламов, представляющих серьёзную экологическую проблему и трудности при утилизации традиционными методами. В условиях переработки нефтешламов ВКЭГР позволяет эффективно инициировать термокаталитические процессы без необходимости внешнего нагрева и длительной экспозиции. Такая технология обеспечивает высокую скорость протекания реакций, снижение энергозатрат и возможность целенаправленного влияния на фракционный состав конечного продукта. Совмещение ВКЭГР с каталитической обработкой открывает новые горизонты в области утилизации углеводородных отходов и получения товарных топливных компонентов. Изучено влияние технологических параметров и каталитических добавок на эффективность процесса. Оптимизированы условия обработки, включая расстояние между воздушными электродами, ёмкость конденсатора батареи и длительность импульсного воздействия, обеспечивающие высокий выход легкой и средней фракции. Особое внимание уделено выбору катализатора: наибольшую активность продемонстрировала добавка на основе бентонита, с соединением никеля. Данный катализатор способствовал улучшению деструкции тяжёлых компонентов нефтешлама, увеличивая выход бензиновой и дизельной фракций. Полученные результаты подтверждают перспективность метода ВКЭГР в сочетании с каталитическими добавками для глубокой переработки нефтешламов. Исследование открывает возможности для более эффективной и экологически безопасной утилизации нефтяных отходов с получением ценных углеводородных продуктов , что особенно важно в условиях ужесточения природоохранных требований. Ключевые слова: нефтешлам, электрогидравлические импульсы, бентонит, катализ, переработка, углеводородные фракции.


  • АТАСУ-АЛАШАНЬКОУ МҰНАЙ ШЛАМДАРЫНЫҢ РЕОЛОГИЯЛЫҚ МІНЕЗДЕМЕЛЕРІНЕ ЖВҚИР-ДЫҢ ӘСЕРІН ЗЕРТТЕУ

    by А. Ж. Сатыбалдин, М. И. Байкенов, Б. Б. Жандыбаев, Р. С. Сейтжан, Д. Н. Бердибаев

    Мұнай өңдейтін кәсіпорындарда құрамында мұнайы бар қалдықтардың барлық түрлері қалыптасады – мұнай қалдықтары мен құрамында мұнайы бар техногенді шикізаттар сияқтылар. Олар тазалау процесстерінен, атап айтқанда мұнай цистерналардан шөгінділерді жою кезінде, мұнай қалдықтары мен құрамында мұнайы бар техногенді шикізатты пайдалану немесе залалсыздандыру кезінде қалыптасады және де бұл қиын техникалық мәселе болып табылады. Оны шешудің табысы айтарлықтай дәрежеде, мұнай қалдықтарын жоюға, өңдеуге және детоксикацияға бағытталған технологиялық, зертханалық, тәжірибелік және теориялық өңдеулер қандай принципте негізделуіне байланысты. Құрамында мұнайы бар қалдықтарды өңдеу процесстеріне ғылыми тәсіл бірінші дәрежелі мәнге ие. Айрықша мақсатқа оларды кешенді пайдалану жатқызылады, яғни құрамында мұнай қалдықтарын құрайтын барлық құраушыларын қолдану арқылы және нәтижесінде ол өнім, реагент немесе басқа өнімдерді өндіру кезінде, және де басқа қалдықтарды өңдеу кезінде қолданыс табады. Берілген мақаланың болып жағашылдығы - өндірістік шарттарда мұнай қалдықтарын қалдықсыз пайдалану кешенді технологиясы үшін, мұнай қалдықтары мен құрамында мұнайы бар техногенді шикізатты өңдеуде ЖВҚИЭР (жоғары вольтты қысқа импульсті электрогидравликалық разряд) қолдану болып табылады. Бұл әдістің негізінде ЖВҚИЭР разрядтық толқындардың өңделетін шикізатқа әсері жатыр. Кілтті сөздер: ЖВҚИЭР (жоғары вольтты қысқа импульсті электрогидравликалық разряд), мұнай шламы, мұнай қалдығы, катализатор, минералды бөлік.

  • Open Access

    Identifying some regularities of the aerodynamics around wind turbines with a vertical axis of rotation

    by Nazgul Tanasheva, Gulden Ranova, Amangeldy Satybaldin, Ainura Dyusembaeva, Asem Bakhtybekova, Nurgul Shuyushbayeva, Sholpan Kyzdarbekova, Indira Sarzhanova, Nurgul Abdirova

    The design of wind turbines with a vertical axis of rotation is quite simple, which successfully increases the level of efficiency. Existing vane wind turbines have a shortage of currents in the form of negative torque, and installations operating on the Magnus effect have a low lifting force. In this regard, the development and research of installations operating at speeds from 3 m/s, with combined blades with increased work efficiency is an urgent topic. The object of the study is a wind turbine consisting of a system of rotating cylinders and fixed blades operating at low air flow speeds starting from 3 m/s. Numerical studies were carried out using the Ansys Fluent program and the implemented k-ε turbulence model. A special feature of the work is the combined use of two lifting forces: a cylinder and fixed blades, which made it possible to increase the output aerodynamic parameters. Calculations were performed for incoming flow rates of 3 m/s, 9 m/s, 15 m/s and cylinder rotation speeds of 315 rpm, 550 rpm, 720 rpm. It is determined that the period of change of the moment of forces T is 0.5 m/s, which corresponds to 2 revolutions of the wind wheel per minute. It was found that the cylinder rotation frequency in the range from 315 rpm to 720 rpm does not affect the period of change in the moment of forces, but the amplitude of the moment of forces increases with decreasing rotation frequency. The dependences of the rotation speed of the wind wheel on the velocity of the incoming flow, found by the method of sliding grids and 6DOF, are also obtained. It is determined that the installation begins to make revolutions from 3 m/s, with a positive torque of forces. The field of practical application of the numerical results will be useful for further research of wind turbines with combined blades


  • Open Access

    Determination of the aerodynamic characteristics of a wind power plant with a vertical axis of rotation

    by Nazgul Tanasheva, Akmaral Tleubergenova, Ainura Dyusembaeva, Amangeldy Satybaldin, Elmira Mussenova, Asem Bakhtybekova, Nurgul Shuyushbayeva, Sholpan Kyzdarbekova, Saniya Suleimenova, Ardak Tussypbayeva

    Wind energy is a commercially proven and rapidly developing type of electricity generation. Wind power plants with a vertical axis are more attractive and better suited for use in cities and urban environments where wind flow is less predictable compared to widespread wind power plants with a horizontal axis of rotation. This makes them a much better choice for both ground installation and/or for mounting on buildings and roofs that would otherwise limit the installation of higher horizontal turbine structures. The paper describes an experimental study of the drag force and its coefficient for wind turbines with a vertical axis of rotation. The object of the study is a laboratory model of a wind turbine with blades made in the form of rotating cylinders with a fixed blade. Experimental studies were carried out in the T-1-M wind tunnel, measurements of aerodynamic force were carried out using three-component scales. A distinctive feature of the work is the combined use of the lifting force of the cylinders, as well as the lifting force of the fixed plate. Due to this solution, when comparing with existing wind turbines with a vertical axis of rotation, it was found that the wind turbine in question prevails by 25‒100 % in the number of revolutions. The dependences of the drag force on the flow velocity and the drag coefficient on the Reynolds number from 1·104 to 4·104 are obtained. An uncertainty analysis was also carried out in order to determine the uncertainty by type A, B and the total uncertainty, from which it was found that the measurement error was 1.13 %. The field of the practical application of the results obtained in laboratory studies will be useful in the development of prototypes of wind turbines with a vertical axis of rotation


  • Open Access

    Determination of optimal conditions for processing oil bottom sediments using electrohydraulic effect

    by Amangeldy Satybaldin, Almas Tusipkhan, Raikhan Seitzhan, Sairagul Tyanakh, Gulzhan Baikenova, Dana Karabekova, Murzabek Baikenov

    Currently, there is an interest in effective technologies that cause minimal environmental harm, have low financial costs and allow you to obtain products with high added value. One of the ways to increase the yield of light and medium fractions from oil bottom sediments is to use the electrohydraulic effect. The electrohydraulic phenomenon is a new industrial method of converting electrical energy into mechanical energy, which occurs without the influence of intermediate mechanical links, with high efficiency. Statistical processing of experimental data was carried out with the identification of the optimal mode of the electrohydraulic effect on the destruction of the oil bottom sediment. The influence of various factors is shown (duration of contact, distance between electrodes, amount of added catalyst, capacitance of capacitor and value of applied voltage). The use of the generalized equation made it possible to determine the following optimal conditions for the destruction of the oil bottom sediment using electrohydraulic treatment: duration 7 min, distance 8 mm, amount of added catalyst 1.5 %, capacitance 0.3 μF, applied voltage 14 kV. In terms of the significance of the coefficient (tr), it should be noted that the dominant factors are the distance between the electrodes and the amount of added catalyst. The individual chemical composition of the light and medium fractions of the original oil residue and the processed oil residue was determined. Comparison of the individual chemical composition of fractions up to 200 °С and 200–300 °С, obtained from the oil bottom sediment and from the hydrogenated product, allows to conclude that the electrohydraulic effect has an effective effect on the destruction of the organic mass of the oil bottom sediment. The optimal conditions for electrohydraulic treatment of the oil residue aere established and it is shown that it is possible to utilize the oil bottom sediments