KSKulzhan M. Shaimerdenova

Kulzhan M. Shaimerdenova

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Kulzhan M. Shaimerdenova has a total of 26 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Effect of Electrohydraulic Pulse Treatment on the Reduction of Organic Pollutants and Analytical Signals of Heavy Metals in Wastewater

    by K.M. Shaimerdenova, N.K. Tanasheva, E.I. Borzenko, S.E. Suleimenova, A.R. Bakhtybekova

    This study investigates the effect of electrohydraulic pulse treatment on changes in the physicochemical parameters of wastewater and the analytical signals of heavy metals. The relevance of the study is determined by the need to develop reagent-free methods for the advanced treatment of industrial and municipal-industrial wastewater containing organic pollutants and trace metal impurities. The treatment was carried out in a laboratory high-voltage cell with an interelectrode discharge in an aqueous medium. Wastewater from the pumping station of JSC “Qarmet” in Temirtau was used as the study object. Heavy metals were determined by stripping voltammetry, while changes in the chemical parameters were assessed based on COD, BOD₅, pH, ammonium nitrogen, phenols, petroleum products, total iron, and chromium content. After treatment, COD decreased from 95.9 to 69.0 mg/dm³, corresponding to a reduction of 28.1%. The BOD₅/COD ratio increased from 0.095 to 0.155, indicating an improvement in the biodegradability of the organic compounds. The analytical signals of Zn, Cd, Pb, and Cu decreased by 82.7–100%. The obtained results demonstrate the potential of electrohydraulic pulse treatment as a pretreatment or advanced treatment stage for complex wastewater.

  • Open Access

    Energy Efficiency and Disinfection Performance of Plasma-Pulse Water Treatment by High-Voltage Underwater Spark Discharge

    by Kulzhan M. Shaimerdenova, Nazgul K. Tanasheva, Saule E. Sakipova, Saniya E. Suleimenova, Akerke Rakhmankyzy, Nurgul N. Shuyushbayeva, Ingkar E. Aldabergen, Aizhan K. Salkeyeva, Arailym D. Bozayeva

    Plasma-pulse water treatment using a high-voltage underwater spark discharge is a reagent-free approach with potential for simultaneous disinfection and physicochemical modification of water. In this study, a laboratory-scale recirculating reactor (Vtot = 10 L) equipped with a storage capacitor of C = 0.25 μF was operated at U = 15–30 kV and a pulse repetition frequency of about 1.8 Hz to evaluate disinfection performance and system-level energy characteristics for two water matrices, surface wastewater and tap water. The corresponding calculated capacitor-stored energy ranged from 28.1 to 112.5 J per pulse. Microbiological and physicochemical measurements were performed in triplicate. At U = 30 kV, the total microbial count in wastewater decreased from approximately 1 × 105 CFU/mL to below the method detection limit (LOD = 1 CFU/mL) within 2–3 min. For the 2 min/10 L operating mode, the system-level specific energy input was estimated at 6.7 kWh/m3. During the initial treatment period, temperature-compensated conductivity (σ25) decreased by 3–8%, depending on the water matrix, and then increased with prolonged treatment. These results show that the tested reactor can provide rapid reagent-free reduction in culturable microflora under the studied conditions. However, plasma-pulse treatment should be regarded primarily as an advanced treatment, polishing, or pre-treatment option for complex water matrices rather than as a universal replacement for conventional large-volume disinfection technologies.

  • Open Access

    STUDY OF THE INFLUENCE OF ELECTROHYDRAULIC DRILLING PARAMETERS ON THE EFFICIENCY OF HARD SOILS DESTRUCTION

    by K.M. Shaimerdenova, B.R. Nussupbekov, E.R. Schrager, B.A. Akhmadiyev, S.ZH. Nakipova, A. Rakhmankyzy

    This article examines several aspects of the electrohydraulic drilling method. It presents the results of an experimental study examining the influence of electrohydraulic drilling modes on the efficiency of breaking stone. A brief description and diagram of the experimental setup are provided. Quantitative relationships between the electrical parameters of the optimal mode of electrohydraulic drilling technology for breaking hard soils samples of varying thicknesses are determined. The experimental data confirm the feasibility of achieving significantly higher drilling speeds for vertical wells in hard soil compared to traditional methods.

  • ЖВҚИР ҚОНДЫРҒЫСЫНЫҢ РАЗРЯДТЫҚ КЕРНЕУІНІҢ МҰНАЙ ШЛАМЫНЫҢ ЖЕҢІЛ ЖӘНЕ ОРТА ФРАКЦИЯЛАРЫНЫҢ ШЫҒЫМЫНА ӘСЕРІ

    by А.ж. Сатыбалдин, К.м. Шаймерденова, Г.к. Алпысова, С.ж. Накипова, Р. Сейтжан

    Бұл жұмыста Атасу-Алашанькоу мұнай айдау құбырының ішкі бетінде түзілген мұнай шламын жоғары вольтты қысқа импульсті электрогидравликалық разряд әдісі арқылы қайта өңдеу процесін зерттеу нәтижелері келтірілген. Негізгі электрофизикалық параметрлердің - разрядтық кернеудің, конденсатор батареясының сыйымдылығының, өңдеу ұзақтығының, ауа электродтары арасындағы қашықтықтың және катализатор қоспасының мұнай шламынан алынатын жеңіл және орташа фракциялар шығымына әсері жан-жақты зерттелді. Зерттеу нәтижелері көрсеткендей, фракция шығымының ең жоғары мәні 36,4 %-ға дейін артатыны анықталды. Никель жалатылған цеолит катализаторының жоғары молекулалы қосылыстардың деструкциясын арттыратыны және электрофизикалық параметрлердің оңтайлы мәндерін таңдау процестің энергия тиімділігін ұлғайтатыны анықталды. Алынған нәтижелер мұнай қалдықтарын қайта өңдеудің және кәдеге жаратудың энергия үнемді технологияларын жетілдіру үшін негіз бола алады. Сонымен қатар, зерттеу барысында алынған мәліметтер электрогидравликалық әсердің физика-химиялық механизмдерін терең түсінуге мүмкіндік береді және болашақта катализатор құрамын жетілдіру мен өңдеу параметрлерін оңтайландыру бағытында қолдануға болады. Жүргізілген зерттеу нәтижелері экологиялық қауіпсіз және энергия тиімді технологияларды өнеркәсіптік деңгейде енгізудің әлеуетін көрсетеді. Бұл өз кезегінде мұнай өндіру және қайта өңдеу салаларында технологияларды дамытуға жол ашады. Кілтті сөздер: мұнай шламы, нанокатализатор, жоғары вольтты қысқа импульсті электрогидравликалық разряд (ЖВҚИР), жеңіл және орташа фракциялар

  • Open Access

    INVESTIGATION OF THE EFFECT OF ELECTROPHYSICAL PARAMETERS OF THE HIGH-VOLTAGE SHORT-PULSE ELECTROHYDRAULIC DISCHARGE SYSTEM AND A NANOCOMPOSITE CATALYST ON OIL SLUDGE DESTRUCTION

    by A.ZH. Satybaldin, K.M. Shaimerdenova, B.B. Zhandybaev, A.A. Bakibaev, G.K. Alpyssova, R. Seitzhan, S. Tyanakh

    This paper presents the results of a study on oil sludge processing using high-voltage short-pulse electrohydraulic discharge. The influence of key parameters, such as discharge voltage, capacitor bank capacitance, processing time, electrode gap, and catalyst concentration, on the yield of light and medium petroleum fractions is analyzed. Experiments have shown that the optimal conditions for achieving the maximum fraction yield (up to 36.4%) are: a processing time of 6 minutes, an electrode gap of 10 mm, a capacitor bank capacitance of 0.125 μF, and a nanocomposite catalyst concentration of 1%. It has been established that the use of a catalyst enhances the destruction of high-molecular compounds, while optimization of the electrophysical parameters improves the energy efficiency of the process. The obtained results can be used to develop energy-efficient technologies for oil waste disposal.

  • STUDY OF ELECTRIC DISCHARGES’ INFLUENCE ON WATER ELECTRICAL CONDUCTIVITY AND SALT CONTENT

    by K. M. Shaimerdenova, S. E. Suleimenova, N. K. Tanasheva, S. Zh. Nakipova, N. T. Abdirova

    "It is known that electrical discharge strikes can cause the formation of active free radicals, atomic oxygen and hydrogen, nitrogen compounds, and even simple amino acids in water. Air and other gases dissolved in water contribute to the realization of these processes. Based on the fact that the electrohydraulic effect is a powerful source of ultrasound, it can be assumed that ultrasound is one of the main factors influencing microorganisms. Given that the electrohydraulic effect is a powerful source of ultrasound, it can be assumed that ultrasound is one of the primary causes of the intense destruction of microorganisms. The vigorous oxidative action of atomic oxygen, which is formed during electrical discharge strikes, literally burns all organic matter present in the water. Experiments have shown that direct discharge exposure is lethal to microorganisms suspended in the liquid, and the liquid obtained after the corresponding electrohydraulic treatment acquires induced bactericidal properties that do not diminish over time. Keywords: electrical discharge treatment, electrohydraulic effect, specific electrical conductivity (SEC), salt content, TDS- meter."

  • ВЛИЯНИЕ НАНОКАТАЛИЗАТОРА И ВКЭГР НА ВЫХОД ФРАКЦИЙ ИЗ НЕФТЕШЛАМА

    by А. Ж. Сатыбалдин, К. М. Шаймерденова, М. И. Байкенов, Б. Б. Жандыбаев, С. Тянах

    Проведено исследование переработки нефтешламов в легкие и средние фракции с использованием высоковольтного короткоимпульсного электрогидравлического разряда (ВКЭГР). Актуальность работы обусловлена растущими объёмами нефтешламов, представляющих серьёзную экологическую проблему и трудности при утилизации традиционными методами. В условиях переработки нефтешламов ВКЭГР позволяет эффективно инициировать термокаталитические процессы без необходимости внешнего нагрева и длительной экспозиции. Такая технология обеспечивает высокую скорость протекания реакций, снижение энергозатрат и возможность целенаправленного влияния на фракционный состав конечного продукта. Совмещение ВКЭГР с каталитической обработкой открывает новые горизонты в области утилизации углеводородных отходов и получения товарных топливных компонентов. Изучено влияние технологических параметров и каталитических добавок на эффективность процесса. Оптимизированы условия обработки, включая расстояние между воздушными электродами, ёмкость конденсатора батареи и длительность импульсного воздействия, обеспечивающие высокий выход легкой и средней фракции. Особое внимание уделено выбору катализатора: наибольшую активность продемонстрировала добавка на основе бентонита, с соединением никеля. Данный катализатор способствовал улучшению деструкции тяжёлых компонентов нефтешлама, увеличивая выход бензиновой и дизельной фракций. Полученные результаты подтверждают перспективность метода ВКЭГР в сочетании с каталитическими добавками для глубокой переработки нефтешламов. Исследование открывает возможности для более эффективной и экологически безопасной утилизации нефтяных отходов с получением ценных углеводородных продуктов , что особенно важно в условиях ужесточения природоохранных требований. Ключевые слова: нефтешлам, электрогидравлические импульсы, бентонит, катализ, переработка, углеводородные фракции.


  • INVESTIGATION OF THERMOPHYSICAL FACTORS AFFECTING WIND POWER PLANT BLADE EFFICIENCY

    by K. M. Shaimerdenova, A. Zh. Tleubergenova, N. K. Tanasheva, L. L. Minkov, N. T. Abdirova

    This article discusses the problems of ensuring stable and efficient operation of wind power plants under various thermal conditions. The characteristic design features of a combined blade consisting of a rotating cylinder and a fixed blade are analyzed. The necessity of studying thermophysical parameters (such as temperature, density and viscosity of air) has been identified and justified, since they significantly affect the structure of the airflow and the aerodynamic forces acting on the blade. The developed design effectively reduces turbulence while maximizing lift, thereby increasing the aerodynamic efficiency of the system. It is shown that an increase in the speed of rotation of the cylinder in combination with an increase in air temperature increases the pressure gradient around the cylinder, which leads to increased productivity. The experimental data obtained make it possible to formulate recommendations for optimizing both the geometry and operating modes of installations with combined blades, which makes it possible to obtain economical energy in various climatic conditions. Thus, the results of this study can contribute to improving operational reliability and wider adoption of wind energy technologies. Keywords: wind power plant, combined blade, rotating cylinder, lifting force, pressure distribution, air flow temperature, aerodynamic efficiency