CXChaoyang Xing

Chaoyang Xing

*This is an algorithmically generated author record based on publicly available information.

Chaoyang Xing has a total of 39 co-authors. Here are the top co-authors by number of shared publications:

  • Fanli Meng

    College of Information Science and Engineering, Northeastern University, Shenyang, 110819, China; Hebei Key Laboratory of Micro-Nano Precision Optical Sensing and Measurement Technology, Qinhuangdao, 066004, China; National Frontiers Science Center for Industrial Intelligence and Systems Optimization, Northeastern University, Shenyang, 110819, China; Key Laboratory of Data Analytics and Optimization for Smart Industry (Northeastern University), Ministry of Education, China

    3 shared publications
  • Zhenyu Yuan

    Northeastern University

    3 shared publications
  • Lihui Feng

    Beijing Institute of Technology

    2 shared publications
  • Nannan Li

    Department of Microsystem Integration, Beijing Institute of Aerospace Control Devices, Beijing, China

    2 shared publications
  • Peng Guo

    Key Laboratory of Photonics Information Technology, Ministry of Industry and Information Technology, School of Optics and Photonics, Beijing Institute of Technology, Beijing, China

    2 shared publications
  • Renze Zhang

    College of Information Science and Engineering, Northeastern University, Shenyang, China

    2 shared publications

Latest Publications

  • Data-Driven Multiparameter Fusion for MEMS Gyroscope ZRO Self-Compensation in Full Temperature Range

    by Jianpeng Wang, Fan Bo, Gongliu Yang, Fumin Liu, Chaoyang Xing, Qingzhong Cai, Yi Zhou

    The full-temperature bias stability (1σ) is a common indicator used to evaluate the performance of microelectromechanical systems (MEMS) gyroscopes over the entire temperature range. This paper proposes a full-temperature multi-parameter zero-rate output (ZRO) thermal drift compensation method based on a feedforward neural network (FFN). Notably, the proposed method eliminates the need for an external temperature sensor and is applicable to all MEMS gyroscopes. The model integrates four temperature-related parameters: resonant frequency, drive excitation voltage, quadrature suppression voltage, and reference source voltage. After hyperparameter optimization and training, the FFN model was validated on four gyroscopes with different performance levels to assess its generalization capability. Experimental results show that for Gyroscope 1, the full-temperature bias stability improved by 93.8% (reduced from 0.671°/s to 0.042°/s), and the full-temperature ZRO (3σ) suppression rate reached 97.9%. Notably, compared with the traditional multiple linear regression model, the proposed FFN demonstrates strong generalization, reducing the full-temperature bias stability (1σ) by 66%, 67%, 77%, and 44% across the four tested gyroscopes, respectively. Furthermore, implementation on an FPGA platform verifies the potential of the FFN model for real-time, in-situ temperature drift compensation.


  • A 0.021mm2 92dB-SNDR 88kHz-BW Incremental Zoom ADC with 2nd-order RT-DEM and Quiet Chopping

    by Chaoyang Xing, Yi Zhong, Nan Sun, Lu Jie

    This work proposes a continuous-time incremental zoom ADC with an on-chip $2^{\mathrm{n}\mathrm{d}}$-order decimation filter. It adopts a $2^{\mathrm{n}\mathrm{d}}$-order RT-DEM technique to eliminate DAC mismatch with a customized bidirectional circular shift register, and the quiet chopping technique to achieve high input impedance. The prototype ADC presents 91.6dB SNDR over an 88kHz bandwidth, consuming only $437\mu \mathrm{W}$ of power.


  • Open Access

    Simulations of the Rotor-Stator-Cavity Flow in Liquid-Floating Rotor Micro Gyroscope

    by Chunze Wang, Rui Feng, Yao Chu, Qing Tan, Chaoyang Xing, Fei Tang

    When rotating at a high speed in a microscale flow field in confined spaces, rotors are subject to a complex flow due to the joint effect of the centrifugal force, hindering of the stationary cavity and the scale effect. In this paper, a rotor-stator-cavity (RSC) microscale flow field simulation model of liquid-floating rotor micro gyroscopes is built, which can be used to study the flow characteristics of fluids in confined spaces with different Reynolds numbers (Re) and gap-to-diameter ratios. The Reynolds stress model (RSM) is applied to solve the Reynolds averaged Navier–Stokes equation for the distribution laws of the mean flow, turbulence statistics and frictional resistance under different working conditions. The results show that as the Re increases, the rotational boundary layer gradually separates from the stationary boundary layer, and the local Re mainly affects the distribution of velocity at the stationary boundary, while the gap-to-diameter ratio mainly affects the distribution of velocity at the rotational boundary. The Reynolds stress is mainly distributed in boundary layers, and the Reynolds normal stress is slightly greater than the Reynolds shear stress. The turbulence is in the state of plane-strain limit. As the Re increases, the frictional resistance coefficient increases. When Re is within 104, the frictional resistance coefficient increases as the gap-to-diameter ratio decreases, while the frictional resistance coefficient drops to the minimum when the Re exceeds 105 and the gap-to-diameter ratio is 0.027. This study can enable a better understanding of the flow characteristics of microscale RSCs under different working conditions.


  • Gas Sensor Based on Znâ‚‚SnOâ‚„/SnOâ‚‚ Nanocubes for Rapid N-Propanol Detection

    by Yudong Li, Zhenyu Yuan, Fanli Meng, Yanbai Shen, Chaoyang Xing

    N-propanol has multiple potentially hazardous properties such as explosive, toxic, and flammable. Due to the critical application of n-propanol in industrial solvents, a reliable and stable chemical sensor is needed to detect n-propanol effectively. This paper reports a gas sensor based on Zn 2 SnO 4 /SnO 2 prepared by a simple co-precipitation method for n-propanol detection. Electrical test results show that the gas sensor designed in this paper achieves rapid detection of n-propanol with a lower detection limit of up to 0.5 ppm and outstanding stability. The performance improvement may be attributed to the fact that Zn 2 SnO 4 as a promoter and framework effectively enhances the gas-sensitive performance of SnO 2 for alcohols and achieves further segmentation of alcohol detection.


  • Preparation of p-LaFeO₃/n-Feâ‚‚O₃ Heterojunction Composites by One-Step Hydrothermal Method and Gas Sensing Properties for Acetone

    by Wenbo Qin, Renze Zhang, Zhenyu Yuan, Chaoyang Xing, Fanli Meng

    Perovskite LaFeO 3 materials have received increasing attention in volatile organic compound (VOC) gas detection due to their unique crystal structure and excellent physicochemical properties. However, achieving high sensitivity with a low limit of detection at low temperature is still an important research topic. In this work, p-LaFeO 3 /n-Fe 2 O 3 composites were prepared by a simple one-step hydrothermal method for the detection of acetone gas. Various characterizations showed that the LaFeO 3 /Fe 2 O 3 composites were successfully synthesized. The test results showed that the LaFeO 3 /Fe 2 O 3 composites have more excellent gas sensing properties than acetone compared with pure LaFeO 3 material. The response of the LaFeO 3 /Fe 2 O 3 sensor to 10 ppm acetone (23.5) at 210 °C is almost five times larger than that of the pure LaFeO 3 material. In addition, the LaFeO 3 /Fe 2 O 3 sensor has a low limit of detection (100 ppb), good long-term stability, and selectivity. The enhanced acetone sensing performance can be ascribed to changes in the electronic structure and surface properties caused by heterojunctions, as well as to the synergistic effect formed between the two components. This work provides a simple synthetic strategy to enhance the acetone gas sensing performance of perovskite-type LaFeO 3 , which has promising applications in industrial production and healthcare.


  • MoO3/SnO2Nanocomposite-Based Gas Sensor for Rapid Detection of Ammonia

    by Yang Liu, Zhenyu Yuan, Renze Zhang, Hanyang Ji, Chaoyang Xing, Fanli Meng

    Ammonia is harmful to human health, however, the detection limit of the sensor based on traditional semiconductor gas sensors is high and the speed is slow. Constructing heterostructure is an effective method to improve the performance of sensors. In this article, 1-D MoO 3 nanorods and SnO 2 nanoparticles are successfully combined to obtain MoO 3 /SnO 2 nanocomposite. The 1-D structure can increase the speed of electron transport, while the nanoparticles on the surface increase the specific surface area, more importantly, the structure maximizes the interface area between the two materials which can transfer electronic more efficiently. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED), energy dispersive spectrometer (EDS), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET), and Barrett–Joyner–Halenda (BJH) are used to analyze the microstructure and elemental composition of MoO 3 /SnO 2 . The diameter of MoO 3 /SnO 2 nanocomposite is approximately 200 nm and the distribution is uniform. The response of MoO 3 /SnO 2 nanocomposite to 100-ppm NH 3 is 12.7 at 280 °C, and the response/recovery time is 13/2 s. The detection limit for NH 3 can reach 10 ppb (response 1.3), which enables rapid detection of NH 3 at low concentration. Electron transport requires more energy to overcome the contact barrier between pure SnO 2 nanoparticles, which can also lead to electron emission and noise increase. However, the sensitive electrons of MoO 3 /SnO 2 nanocomposite can transmit electrons along the 1-D rod-like structure of MoO 3 , which undoubtedly accelerates the efficiency of electron transmission. Moreover, n-n heterojunction formed between MoO 3 and SnO 2 to bend the SnO 2 band and show better sensitivity to NH 3 . Therefore, MoO 3 /SnO 2 nanocomposite shows a low detection limit and a rapid response/recovery speed. Nevertheless, the nanoparticles on the surface of MoO 3 /SnO 2 nanocomposite begin to agglomerate with the increase of SnO 2 content, which leads to the decrease of gas-sensitive response. The formation process of MoO 3 /SnO 2 composites is also discussed in this article. The excellent gas sensing results show that MoO 3 /SnO 2 composites are a promising gas sensing material.


  • Open Access

    Theoretical and Experimental Study on Nonlinear Failure of an MEMS Accelerometer under Dual Frequency Acoustic Interference

    by Peng Guo, Jiayu Zhang, Lihui Feng, Jianmin Cui, Chaoyang Xing

    In order to quantitatively study the interfered output of the accelerometer under an acoustic injection attack, a mathematical model for fitting and predicting the accelerometer output was proposed. With ADXL103 as an example, an acoustic injection attack experiment with amplitude sweeping and frequency sweeping was performed. In the mathematical model, the R-squared coefficient was R2 = 0.9990 in the acoustic injection attack experiment with amplitude sweeping, and R2 = 0.9888 with frequency sweeping. Based on the mathematical model, the dual frequency acoustic injection attack mode was proposed. The difference frequency signal caused by the nonlinear effect was not filtered by the low-pass filter. At a 115 dB sound pressure level, the maximum acceleration bias of the output was 4.4 m/s2 and the maximum amplitude of fluctuation was 4.97 m/s2. Two kinds of methods of prevention against acoustic injection attack were proposed, including changing the damping ratio of the accelerometer and adding a preposition low-pass filter.


  • Open Access

    A Filtering Algorithm of MEMS Gyroscope to Resist Acoustic Interference

    by Yufei Sun, Peng Guo, Lihui Feng, Chaoyang Xing, Junjie Wu

    To reduce the impact of acoustic interference in a microelectromechanical system (MEMS) gyroscope and to improve the reliability of output data, a filtering algorithm based on orthogonal demodulation is proposed. According to the working principle and failure mechanism of a MEMS gyroscope, the sound and angular velocity frequencies are not identical, which lead to a different frequency signal output of the original single-channel demodulation scheme. Therefore, a Q channel demodulation filtering process was added to the origin single-channel demodulation scheme. For the Q channel demodulated signal, a Hilbert transform was used to compensate for the 90 degree phase shift. The IQ dual-channel difference can remove the acoustic interference signal. The simulation results indicate that the scheme can effectively suppress the acoustic interference signal and it can eliminate more than 95% of the impact of sound waves. We assembled the acoustic interference experimental platform, collected the driving and sensing data, and verified the denoising performance with our algorithm, which eliminated more than 70% of the noise signal. The simulation and experimental results demonstrate that the scheme can eliminate acoustic interference signal without destroying angular velocity signal.