SSSamuel Samuel

Samuel Samuel

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Samuel Samuel has a total of 73 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Engineering Design of Stepped Hull for Planing Vessels Using CFD-Based Evaluation

    by Samuel, Serliana Yulianti, Muhammad Iqbal, Davis Rian Kusuma, Ari Wibawa Santosa, Good Rindo, Andi Trimulyono, Ahmad Fitriadhy

    The growing demand for high-speed marine transportation requires continuous improvement in ship design to achieve higher hydrodynamic efficiency. From an engineering design perspective, hull form modification is a key approach to optimizing the performance of planing vessels, particularly through the implementation of stepped hull configurations. This study aims to investigate the effects of step geometry and step position on the resistance and trim characteristics of a planing hull based on Taunton et al.’s Model C, with the objective of improving vessel efficiency. The design methodology integrates hull geometry modification, parametric variation in step position and step height, and numerical performance assessment. In this research, the governing equations are solved using the Reynolds-Averaged Navier–Stokes (RANS) framework with the Finite Volume Method (FVM) as the discretization technique. The turbulence model used is k-ω SST, while the interaction between water and air phases is represented using the Volume of Fluid (VOF) method. From a design performance perspective, the results demonstrate that stepped hull geometry significantly influences resistance and trim characteristics. The optimal design configurations achieved a resistance reduction of up to 17.93% and a trim of 1.53° was achieved with a stepped position of 430 mm from the transom and a stepped height of 25 mm (Model A3) at Fr 2.28. Meanwhile, a resistance reduction of 15.49% and a trim of 1.46° were observed for a stepped position of 860 mm from the transom and a stepped height of 25 mm (Model B3) at Fr 2.72. These findings highlight the importance of step geometry and placement as key design variables in improving planing hull performance. This study demonstrates that CFD-based evaluation can effectively support engineering design decisions for stepped hull optimization, providing a systematic approach for improving hydrodynamic efficiency in high-speed vessel design.

  • Open Access

    Study of Applicability in Minimising Pitch Radius Gyration for Different Hull Types to Improve Seakeeping Performance

    by Muhammad Iqbal, Andi Trimulyono, Samuel, Ocid Mursid

    This paper presents an optimisation study to determine the best centre of gravity (CoG) position to improve seakeeping performance. Two varied parameters used in this study were the longitudinal and vertical centre of gravity (LCG and VCG). The Radius Gyration in the y-axis (Ry) is introduced as a novel single-objective function to be minimised, avoiding the complexity of the conventional seakeeping optimisation process. The quality of the seakeeping performance was evaluated by response amplitude operators (RAOs) of the heave, pitch, and vertical motion. Two different hull forms are compared to investigate the applicability of the Ry as the objective function in seakeeping optimisation. The patrol boat and S-60 hull form are selected as representatives of a planing hull type and a displacement hull type. The optimisation was carried out by using the Central Composite Design (CCD) and response surface methodology (RSM) to model the relationship between the CoG and Ry from large and small vessels, with the objective function minimising the Ry. The finding shows that minimising the Ry is more sensitive to the planing hull type compared to the displacement hull type in reducing the vertical motion in different Froude numbers and wave headings.


  • Investigating the impact of inhomogeneous roughness on the drag of a planing craft assisted by numerical simulation

    by Muhammad Luqman Hakim, Ahmad Firdhaus, Samuel Samuel, Soonseok Song, Sanghyun Kim, I Ketut Aria Pria Utama


  • Open Access

    Analysis of Rounded Interceptor Effects on Ship Resistance of High-Speed Planing Vessel using Computational Fluid Dynamics

    by Samuel Samuel, Alfin Firmansyah, Serliana Yulianti, Dian Purnama Sari, Nandiko Rizal, Muryadin Muryadin, Fariz Maulana Noor, Putri Virliani, Rio Dwi Sakti Wijaya, Dimas Fajar Prasetyo, et al.

    The primary objective of the interceptor is to control the trim of the vessel, thereby enhancing fuel efficiency and stability. However, at high speeds, the interceptor induces adverse effects. This research aims to mitigate these negative impacts by modifying the geometric configuration of the interceptor. The shape modifications of the rounded interceptor evaluated through numerical simulations include radii of R10.00, R12.50, and R15.00. This study aims to contribute to an enhanced understanding of the effects on drag, heave, and trim performance of the planing hull vessel. The methodology employs a Computational Fluid Dynamics (CFD) approach using Reynolds-Averaged Navier-Stokes (RANS) equations. The simulation verification was conducted regarding prior experimental studies, and the simulation procedures adhered to the guidelines set by the International Towing Tank Conference (ITTC). The interceptor's height is a key factor in reducing trim, heave, and consequently, drag. The modified rounded interceptor effectively reduces drag at high speeds.

  • Exploring the Effects of Composition and Thickness Variations on Polyurethane Density in Fishing Vessel Hatches as an Insulation Material: A Comprehensive Study

    by Samuel Samuel, Tuswan Tuswan, Rizquna Hafizh Kuncarajati, Sarjito Jokosisworo, Parlindungan Manik, Muryadin Muryadin

    Good Handling Practices (GPH) for fish will have an impact on the quality of fish catches. Therefore the addition of material as a good insulator in the hatch of a fishing vessel is needed. Polyurethane as an insulator material can be used as one of the additional materials in the hatch of a fishing vessel. This study aimed to compare the thermal conductivity properties of the composition and thickness of polyurethane. The results will find out how the influence of composition and thickness of polyurethane affect the insulation of the fishing vessel hatch. The ideal polyurethane insulation should have a material density ρ ≥ 30kg/m3. Density values from testing variations in polyurethane composition show density values in the range of 40kg/m3-100kg/m3, this outcome meets the criteria for a high-quality polyurethane insulating material.

  • Open Access

    Enhancing Efficiency in Deep-V Planing Hull Ships: A Study on The Design of Spray Strips to Minimize Resistance

    by Samuel Samuel, Syihan Raditya Siregar, Alfin Firmansyah, Ari Wibawa, Parlindungan Manik, Dian Purnama Sari

    Spray strips are deflectors installed on the hull to decrease the wetted surface area (WSA). By reducing the WSA, the overall resistance of the ship is lowered because it lessens the friction of water flowing against the hull. The purpose of this research is to predict the function of spray strips in an effort to improve ship performance. In this study, the numerical methodology employs the Finite Volume Method (FVM) along with the Reynolds-averaged Navier-Stokes equation (RANS) for resolving fluid dynamics issues. The modeling of the two-phase flow involves the utilization of both the Volume of Fluid (VOF) model and the Eulerian model. The results of this study show that spray strips can reduce the total resistance by about 2.7%. Increasing the number of spray strips can reduce the drag shear value by 3.5%. Spray strips are effective in reducing total drag when the Froude number (Fr) is greater than 1 or when the vessel is in the planing phase. The profile shape of spray strips with dimension 2:1 shows the best performance on ship resistance.

  • Prediction of the impact of biofouling roughness on a full-scale planing boat performance using CFD

    by Wilma Amiruddin, Muhammad Luqman Hakim, Ahmad Firdhaus, Dian Purnamasari, Tuswan Tuswan, Samuel Samuel, Ocid Mursid


  • Open Access

    Numerical Investigation of Interceptor Bulb to Improve Trim Control

    by S. Yulianti, S. Samuel, P. Manik, S. T. P. Ahmad

    This study addresses interceptor devices to improve the hydrodynamic characteristic of autonomous unmanned surface vehicle (USV). The bulb and rectangular interceptors had molded on a planning hull. This research aims to mitigate drag impact on rectangular interceptors at high speeds. According to this study, a bulb interceptor had a better impact than a rectangular interceptor. This research is based on the finite volume method (FVM) with dynamic fluid-body interaction (DFBI), which captured the ship’s dynamic trim and sinkage. The simulation used an overset mesh technique with two domains as a donor-acceptor cell. Furthermore, numerical calculations using the Reynolds-Averaged Navier-Stokes equation and the k-turbulence model predict the turbulent flow. Grid independence studies and international towing tank conference (ITTC) recommendations have been applied to ensure simulation accuracy. This study reported that the bulb interceptor had effectiveness between 9%-25% compared to the rectangular interceptor at high speed. This research showed that the bulb interceptor had better effectiveness than the rectangular interceptor.

  • Open Access

    Investigation of An Inverted Bow on Frigate Hull Resistance

    by S. Samuel, A. Wicaksono, W. A. Kurniawan, E. S. Hadi, T. Tuswan, A. Trimulyono, M. Muryadin

    This study discusses the inverted bow design on the combatant hull form. Changes in the shape of the stem angle and flare bow are used as analytical parameters to investigate the ship's performance. Ship resistance and motion will be predicted using the Computational Fluid Dynamics (CFD) approach using the Reynolds Averaged Navier Stokes (RANS) equation and the k-ε turbulence model. The volume of fluid (VOF) method is applied to simulate the change in the free surface between water and air using an overset mesh technique. The ship's movement is limited to sinkage and trim motions, so the movement's accuracy can be predicted. The results revealed that the inverted bow reduced the total resistance by 6.30%, whereas the trim and sinkage showed no significant changes. The breakdown of the reduction ratio showed that friction resistance components were reduced by 10.62%, wave resistance by 44.05%, and viscous-pressure resistance by 45.33%. This highlights the effectiveness of an inverted bow in optimizing wave and viscous pressure, enhancing overall ship performance.


  • Open Access

    Comparative Assessment of Magnesium, Copper, and Zinc Addition to Aluminium Waste Casting for Improving Ship Material Behaviour

    by Kiryanto Kiryanto, Tuswan Tuswan, Samuel Samuel, Ahmad Firdhaus, Dio Ergana, Theo Nadiyas Juneva, Lazuardi Virman Firdaus

    The aluminium industry for ship materials produces waste material that can pollute the environment. To protect the environment from material pollution, the aluminium waste recycling process can be used to develop ship material. This study aims to analyze the physical and mechanical characteristics of aluminium with magnesium, copper, and zinc addition. Several tests, such as chemical composition, tensile, and impact tests, will be conducted to ascertain the mechanical properties of aluminium alloy. Adding alloy material in the range of 0-10% resulted in various alloy element compositions. It can be analyzed that the aluminium contents decreased with the increase of alloy elements. The highest rise in alloy elements can be found in the addition of magnesium than in copper and zinc addition. Moreover, the mechanical tests showed that aluminium casting with magnesium, copper, and zinc additions influenced the mechanical properties of the aluminium alloy. It can be found that tensile strength and modulus of elasticity values improved with the increase of alloy addition. The addition of magnesium has better tensile properties than the addition of copper and zinc. In contrast, the impact resistance decreased with the addition of magnesium, making the alloy more brittle.