RFRui-Tao Fu

Rui-Tao Fu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Rui-Tao Fu has a total of 24 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    The Effect of Heat Treatment on the Microstructure and Mechanical Properties of Plasma-Cladded CoCrFeNiMn Coatings on Compacted Graphite Iron

    by Bo Zhang, Ruitao Fu, Peihu Gao, Baiyang Chen, Anton Naumov, Fei Li, Daming Zhao, Zhong Yang, Yongchun Guo, Jianping Li, et al.

    CoCrFeNiMn high-entropy alloy coatings were deposited on compacted graphite iron (CGI) by plasma transfer arc cladding to strengthen and improve the wear resistance (performance) of the surface. The effects of different heat treatment processes on the microstructure and mechanical properties of the CoCrFeNiMn coatings were investigated. Compared with the deposited coating, the single FCC phase in the heat-treated coatings was retained, the grain size of the columnar dendrites decreased, the spacing between the dendrites increased, and the Cr-rich precipitated phase in the grain boundary increased. The heat treatment process had a positive influence on the microhardness and wear resistance of the coatings. The microhardness of the coatings increased after heat treatment. After heat treatment at 660 °C for 90 min, the coating had the highest microhardness of 563 ± 6.9 HV0.2, and it had the best wear resistance.


  • Open Access

    Effect of Heat Treatment on the Microstructure and Mechanical Properties of Plasma Cladded CoCrFeNiMn Coatings on Compacted Graphite Iron

    by Bo Zhang, Rui-Tao Fu, Pei-Hu Gao, Bai-Yang Chen, Anton Naumov, Fei Li, Da-Ming Zhao, Zhong Yang, Yong-Chun Guo, Jian-Ping Li, et al.

    CoCrFeNiMn high-entropy alloy coatings were prepared on compacted graphite iron(CGI) through plasma cladding to strength the CGI substrate. The effects of heat treatment temperatures and times on the microstructure and mechanical properties of the CoCrFeNiMn coatings were investigated. After heat treatment, a single FCC phase was remained in the coating as compared to the deposited one, with smaller dendrites, larger dendritic spacing and more Cr-rich compounds precipitated between dendrites. The coatings’ microhardness was increased after heat treatment. After heat treated at 660°C for 90 minutes, the coating had the highest microhardness of 563±6.9 HV0.2, the lowest frictional coefficient of 0.71 and the smallest wear mass loss of 1.12 mg, and it had the best wear resistance.

  • Open Access

    Influence of Plasma Arc Current on the Friction and Wear Properties of CoCrFeNiMn High Entropy Alloy Coatings Prepared on CGI through Plasma Transfer Arc Cladding

    by Peihu Gao, Ruitao Fu, Jilin Liu, Baiyang Chen, Bo Zhang, Daming Zhao, Zhong Yang, Yongchun Guo, Minxian Liang, Jianping Li, et al.

    High-entropy alloys receive more attention for high strength, good ductility as well as good wear resistance. In this work, CoCrFeNiMn high-entropy alloy (HEA) coatings were deposited on compacted graphite iron through plasma transfer arc at different currents. The microstructure and wear properties of the CoCrFeNiMn HEA coatings were investigated. The coatings are composed of single phase with FCC structure. The CoCrFeNiMn HEA coating had the highest microhardness of 394 ± 21.6 HV0.2 and the lowest wear mass loss when the plasma current was 65 A. All of the HEA coatings had higher friction coefficients than that of the substrate. There were adhesive, abrasive and oxidation wear forms in the HEA coatings with the wear couple of N80 alloy. The HEA coating presented higher friction coefficient and better wear resistance than compacted graphite iron.


  • Open Access

    Corrosion Resistance of CoCrFeNiMn High Entropy Alloy Coating Prepared through Plasma Transfer Arc Claddings

    by Pei-Hu Gao, Rui-Tao Fu, Bai-Yang Chen, Sheng-Cong Zeng, Bo Zhang, Zhong Yang, Yong-Chun Guo, Min-Xian Liang, Jian-Ping Li, Yong-Qing Lu, et al.

    High entropy alloy attracts great attention for its high thermal stability and corrosion resistance. A CoCrFeNiMn high-entropy alloy coating was deposited on grey cast iron through plasma transfer arc cladding. It formed fine acicular martensite near the grey cast iron, with columnar grains perpendicular to the interface between the grey cast iron substrate and the cladding layer as well as dendrite in the middle part of the coatings. Simple FCC solid solutions present in the coatings which were similar to the powder’s structure. The coating had a microhardness of 300 ± 21.5 HV0.2 when the cladding current was 80 A for the solid solution strengthening. The HEA coating had the highest corrosion potential of −0.253 V when the plasma current was 60 A, which was much higher than the grey cast iron’s corrosion potential of −0.708 V. Meanwhile, the coating had a much lower corrosion current density of 9.075 × 10−7 mA/cm2 than the grey cast iron’s 2.4825 × 10−6 mA/cm2, which reflected that the CoCrFeNiMn HEA coating had much better corrosion resistance and lower corrosion rate than the grey cast iron for single FCC solid solution phase and a relatively higher concentration of Cr in the grain boundaries than in the grains and this could lead to corrosion protection effects.