Wensheng Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Wensheng Zhang has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
- Haisheng Zhao
Shandong Transportation Research Institute, Jinan 250102, China
9 shared publications - Shijie Ma
Shandong Transportation Research Institute, Jinan 250102, China
9 shared publications - Chunhua Su
Shandong Transportation Research Institute, Jinan 250102, China
8 shared publications - Shiping Cui
Key Laboratory of Highway Maintain Technology Ministry of Communication, Jinan 250102, China
8 shared publications - Peiyu Zhang
Key Laboratory of Highway Maintain Technology Ministry of Communication, Jinan 250102, China
6 shared publications - Jincheng Wei
Shandong Transportation Institute, Jinan 250102, China
4 shared publications
Latest Publications
- Open Access
Study on the Dynamic Properties of the Polyurethane Mixture with Open-Graded Gradation
Polyurethane (PU) mixtures exhibit superior mechanical performance compared to traditional asphalt mixtures, owing to the excellent engineering properties of the PU binder. This study investigates the dynamic rheological properties of an open-graded polyurethane mixture (PUM–OGFC) in comparison with a dense-graded polyurethane mixture (PUM–AC). The time–temperature superposition principle and three rheological models (Standard Logistic Sigmoid (SLS), Generalized Logistic Sigmoid (GLS), and Havriliak–Negami (HN)) were employed to construct and analyze master curves. The results show that while PUM–AC possesses a higher dynamic modulus, PUM–OGFC exhibits a lower phase angle, indicating a more elastic response. Critically, PUM–OGFC demonstrated superior rutting resistance, as evidenced by its higher rutting parameter (|E*|/sin δ). Aggregate gradation significantly influenced all rheological properties. The master curve analysis further revealed that PUM–OGFC exhibits greater temperature sensitivity than PUM–AC. The SLS and GLS models provided excellent fits for both dynamic modulus and phase angle data, whereas the HN model was suitable only for dynamic modulus. In summary, the open-graded structure, when combined with a PU binder, creates a high-performance composite with an exceptional balance of elasticity and rutting resistance, showcasing its potential for demanding pavement applications.
Open AccessStudy on the Dynamic Properties of the Polyurethane Mixture with Open-Graded Gradation
Polyurethane (PU) mixtures exhibit superior mechanical performance compared to traditional asphalt mixtures, owing to the excellent engineering properties of the PU binder. This study investigates the dynamic rheological properties of an open-graded polyurethane mixture (PUM–OGFC) in comparison with a dense-graded polyurethane mixture (PUM–AC). The time–temperature superposition principle and three rheological models (Standard Logistic Sigmoid (SLS), Generalized Logistic Sigmoid (GLS), and Havriliak–Negami (HN)) were employed to construct and analyze master curves. The results show that while PUM–AC possesses a higher dynamic modulus, PUM–OGFC exhibits a lower phase angle, indicating a more elastic response. Critically, PUM–OGFC demonstrated superior rutting resistance, as evidenced by its higher rutting parameter (|E*|/sin δ). Aggregate gradation significantly influenced all rheological properties. The master curve analysis further revealed that PUM–OGFC exhibits greater temperature sensitivity than PUM–AC. The SLS and GLS models provided excellent fits for both dynamic modulus and phase angle data, whereas the HN model was suitable only for dynamic modulus. In summary, the open-graded structure, when combined with a PU binder, creates a high-performance composite with an exceptional balance of elasticity and rutting resistance, showcasing its potential for demanding pavement applications.
- Open Access
Study on the Application of Kramers–Kronig Relation for Polyurethane Mixture
Polyurethane (PU) mixture, which is a new pavement mixture, exhibits different dynamic properties compared to a hot-mixed asphalt mixture (HMA). This paper analyzed whether the Kramers–Kronig (K–K) relation and thermorheologically simple properties applied to the PU mixture. Based on the results, the PU mixture exhibited thermorheologically simple properties within the test conditions. The time–temperature superposition principle (TTSP) was applicable for the PU mixture to construct a dynamic modulus master curve using the standard logistic sigmoidal (SLS) model, the generalized logistic sigmoidal (GLS) model, and the Havriliak–Negami (HN) model. The Hilbert integral transformed SLS and GLS models for the phase angle can accurately fit the measured phase angle data with newly fitted shift factors and predict the phase angle within the viscoelastic range. The core–core and black space diagrams both displayed single continuous smooth curves, which can be utilized to characterize the viscoelastic property of the PU mixture. The K–K relation is applicable for the PU mixture to obtain the phase angle master curve model, storage modulus, and loss modulus from the complex modulus test results with the test temperatures and loading frequencies. The phase angle of the PU mixture at extremely high or low test temperatures cannot be derived from the dynamic modulus data.
Open AccessStudy on the Application of Kramers–Kronig Relation for Polyurethane Mixture
Polyurethane (PU) mixture, which is a new pavement mixture, exhibits different dynamic properties compared to a hot-mixed asphalt mixture (HMA). This paper analyzed whether the Kramers–Kronig (K–K) relation and thermorheologically simple properties applied to the PU mixture. Based on the results, the PU mixture exhibited thermorheologically simple properties within the test conditions. The time–temperature superposition principle (TTSP) was applicable for the PU mixture to construct a dynamic modulus master curve using the standard logistic sigmoidal (SLS) model, the generalized logistic sigmoidal (GLS) model, and the Havriliak–Negami (HN) model. The Hilbert integral transformed SLS and GLS models for the phase angle can accurately fit the measured phase angle data with newly fitted shift factors and predict the phase angle within the viscoelastic range. The core–core and black space diagrams both displayed single continuous smooth curves, which can be utilized to characterize the viscoelastic property of the PU mixture. The K–K relation is applicable for the PU mixture to obtain the phase angle master curve model, storage modulus, and loss modulus from the complex modulus test results with the test temperatures and loading frequencies. The phase angle of the PU mixture at extremely high or low test temperatures cannot be derived from the dynamic modulus data.
- Open Access
- 19 April 2024
- Published by MDPI AG in Preprints.org
Study on the Application of Kramers−Kronig Relation for the Polyurethane Mixture
The Polyurethane (PU) mixture is a high−performance engineering material with different dynamic properties compared to a hot−mixed asphalt mixture (HMA). This paper analyzed whether the Kramers−Kronig (K−K) relation and thermo−rheological simple properties were applicable to the PU mixture. Based on the result discussion, the PU mixture exhibited thermo−rheological simple properties within the test conditions. The time−temperature superposition principle (TTSP) was applicable for the PU mixture to construct the dynamic modulus master curve using the standard logistic Sigmoidal (SLS) model, the generalized logistic sigmoidal (GLS) model, and the Havriliak−Negami (HN) model. The Hilbert integral transformed SLS and GLS models for the phase angle can accurately fit the measured phase angle data with newly fitted shift factors and predict the phase angle within the viscoelastic range. The Core−Core and black space diagrams both displayed single continuous smooth curves, which can be utilized to characterize the viscoelastic property of the PU mixture. The K−K relation is applicable for the PU mixture to obtain the phase angle master curve model, storage modulus, and loss modulus from the complex modulus test results. The phase angle of the PU mixture cannot be derived from the dynamic modulus data and currently needs to be derived from the laboratory measurement.
- 19 April 2024
- Published by MDPI AG in Preprints.org
Open AccessStudy on the Application of Kramers−Kronig Relation for the Polyurethane Mixture
The Polyurethane (PU) mixture is a high−performance engineering material with different dynamic properties compared to a hot−mixed asphalt mixture (HMA). This paper analyzed whether the Kramers−Kronig (K−K) relation and thermo−rheological simple properties were applicable to the PU mixture. Based on the result discussion, the PU mixture exhibited thermo−rheological simple properties within the test conditions. The time−temperature superposition principle (TTSP) was applicable for the PU mixture to construct the dynamic modulus master curve using the standard logistic Sigmoidal (SLS) model, the generalized logistic sigmoidal (GLS) model, and the Havriliak−Negami (HN) model. The Hilbert integral transformed SLS and GLS models for the phase angle can accurately fit the measured phase angle data with newly fitted shift factors and predict the phase angle within the viscoelastic range. The Core−Core and black space diagrams both displayed single continuous smooth curves, which can be utilized to characterize the viscoelastic property of the PU mixture. The K−K relation is applicable for the PU mixture to obtain the phase angle master curve model, storage modulus, and loss modulus from the complex modulus test results. The phase angle of the PU mixture cannot be derived from the dynamic modulus data and currently needs to be derived from the laboratory measurement.
- Open Access
Modeling the Dynamic Properties of the Polyurethane Mixture with Dense Gradation Using the 2S2P1D Model
The polyurethane (PU) mixture is a zero-emission and high-performance engineering mixture that could replace traditional asphalt mixtures for pavement paving. This paper investigated the feasibility of using the 2S2P1D model to characterize the linear viscoelastic (LVE) properties of the PU mixture in comparison to the styrene–butadiene–styrene (SBS)-modified asphalt mixture with identical aggregate gradation and binder content. The PU mixture showed higher prediction precision for dynamic modulus and lower prediction precision for phase angle compared to the SBS-modified asphalt mixture. The seven constants of the 2S2P1D model for the PU mixture differed significantly from those of the SBS-modified asphalt mixture. The PU mixture exhibited higher elastic properties and lower creep properties, but the viscous properties represented by the index of η were different from the loss dynamic modulus, which reflected the mixture’s viscous properties. The index η cannot accurately characterize the viscous properties of the PU mixture. The 2S2P1D model exhibited a higher prediction accuracy than the Sigmoidal Christensen Anderson and Marasteanu (SCM) model and could accurately simulate the LVE properties of the PU- and SBS-modified asphalt mixtures. However, the 2S2P1D model should enhance the creep and dashpot elements to provide a more accurate characterization of the properties of the PU mixture.
Open AccessModeling the Dynamic Properties of the Polyurethane Mixture with Dense Gradation Using the 2S2P1D Model
The polyurethane (PU) mixture is a zero-emission and high-performance engineering mixture that could replace traditional asphalt mixtures for pavement paving. This paper investigated the feasibility of using the 2S2P1D model to characterize the linear viscoelastic (LVE) properties of the PU mixture in comparison to the styrene–butadiene–styrene (SBS)-modified asphalt mixture with identical aggregate gradation and binder content. The PU mixture showed higher prediction precision for dynamic modulus and lower prediction precision for phase angle compared to the SBS-modified asphalt mixture. The seven constants of the 2S2P1D model for the PU mixture differed significantly from those of the SBS-modified asphalt mixture. The PU mixture exhibited higher elastic properties and lower creep properties, but the viscous properties represented by the index of η were different from the loss dynamic modulus, which reflected the mixture’s viscous properties. The index η cannot accurately characterize the viscous properties of the PU mixture. The 2S2P1D model exhibited a higher prediction accuracy than the Sigmoidal Christensen Anderson and Marasteanu (SCM) model and could accurately simulate the LVE properties of the PU- and SBS-modified asphalt mixtures. However, the 2S2P1D model should enhance the creep and dashpot elements to provide a more accurate characterization of the properties of the PU mixture.
- Open Access
Study on the Influence Factors of the Dynamic Property of the Polyurethane Mixture with Dense Gradation
Similar to the asphalt mixture, the polyurethane (PU) mixture’s performance and characteristics are dependent on many variables. In this study, six variables, including aggregate gradation (limestone and basalt), aggregate type, PU type, PU content, and curing condition, and several parameter analyzing methods were chosen to determine the effect of variables on the dynamic property, rheological property, and rutting resistance of the PU mixture. The limestone aggregate gradation exhibited a substantial effect on the dynamic property, rheological property, and rutting resistance of the PU mixture; the basalt aggregate gradation exhibited significant influence on the dynamic property and rutting resistance, but a moderate effect on the rheological property. The aggregate type could influence the rheological property and rutting resistance. The slow curing speed of the PU binder decreased the dynamic modulus and rutting resistance but did not influence the phase angle. The rise in PU binder content would only improve the PU mixture’s resistance to rutting. The curing condition and color additive had no impact on the PU mixture’s properties. The generalized logistic sigmoidal (GLS) and Christensen Anderson and Marasteanu model (CAM) models could precisely predict the dynamic modulus and phase angle respectively disregarding the PU mixture features. PUM-10/B exhibited the greatest rutting resistance. The findings will aid in comprehending the properties and influencing factors of the PU mixture as well as in designing the desired mixture.
Open AccessStudy on the Influence Factors of the Dynamic Property of the Polyurethane Mixture with Dense Gradation
Similar to the asphalt mixture, the polyurethane (PU) mixture’s performance and characteristics are dependent on many variables. In this study, six variables, including aggregate gradation (limestone and basalt), aggregate type, PU type, PU content, and curing condition, and several parameter analyzing methods were chosen to determine the effect of variables on the dynamic property, rheological property, and rutting resistance of the PU mixture. The limestone aggregate gradation exhibited a substantial effect on the dynamic property, rheological property, and rutting resistance of the PU mixture; the basalt aggregate gradation exhibited significant influence on the dynamic property and rutting resistance, but a moderate effect on the rheological property. The aggregate type could influence the rheological property and rutting resistance. The slow curing speed of the PU binder decreased the dynamic modulus and rutting resistance but did not influence the phase angle. The rise in PU binder content would only improve the PU mixture’s resistance to rutting. The curing condition and color additive had no impact on the PU mixture’s properties. The generalized logistic sigmoidal (GLS) and Christensen Anderson and Marasteanu model (CAM) models could precisely predict the dynamic modulus and phase angle respectively disregarding the PU mixture features. PUM-10/B exhibited the greatest rutting resistance. The findings will aid in comprehending the properties and influencing factors of the PU mixture as well as in designing the desired mixture.
- Open Access
Study on the Dynamic Performance of PU and SBS-Modified Asphalt Mixtures with Dense Gradation
A polyurethane (PU) mixture with excellent strength is regarded as an alternative to a modified asphalt mixture, but characteristic analysis on them is lacking. In this paper, the dynamic modulus of PU- and SBS-modified asphalt mixtures with the same gradation, aggregate type, and binder content was investigated and compared in terms of dynamic and viscoelastic properties. Compared with the SBS-modified asphalt mixture, the PU mixture with an extremely high dynamic modulus and reduced phase angle at high temperatures had lower temperature sensitivity, which allowed it to resist high-temperature deformation. While the phase angle did not show a statistically significant correlation, the dynamic modulus between the two mixtures did. The dynamic modulus and phase angle values of the PU mixture showed relatively small deviations and could be fitted to produce acceptable master curves, which exhibited obvious differences compared to those of the SBS-modified asphalt mixture. The PU mixture exhibited elastic properties during the test temperature range and, since its thermal rheological property is much smaller than that of the SBS-modified asphalt mixture, it is closer to viscoelastic material. This study provides an understanding of the PU mixture’s dynamic and viscoelastic properties, as well as material information for pavement design and performance prediction with PU mixture layers.
Open AccessStudy on the Dynamic Performance of PU and SBS-Modified Asphalt Mixtures with Dense Gradation
A polyurethane (PU) mixture with excellent strength is regarded as an alternative to a modified asphalt mixture, but characteristic analysis on them is lacking. In this paper, the dynamic modulus of PU- and SBS-modified asphalt mixtures with the same gradation, aggregate type, and binder content was investigated and compared in terms of dynamic and viscoelastic properties. Compared with the SBS-modified asphalt mixture, the PU mixture with an extremely high dynamic modulus and reduced phase angle at high temperatures had lower temperature sensitivity, which allowed it to resist high-temperature deformation. While the phase angle did not show a statistically significant correlation, the dynamic modulus between the two mixtures did. The dynamic modulus and phase angle values of the PU mixture showed relatively small deviations and could be fitted to produce acceptable master curves, which exhibited obvious differences compared to those of the SBS-modified asphalt mixture. The PU mixture exhibited elastic properties during the test temperature range and, since its thermal rheological property is much smaller than that of the SBS-modified asphalt mixture, it is closer to viscoelastic material. This study provides an understanding of the PU mixture’s dynamic and viscoelastic properties, as well as material information for pavement design and performance prediction with PU mixture layers.
- Open Access
Study on the Phase Angle Master Curve of the Polyurethane Mixture with Dense Gradation
The phase angle master curve of the PU mixture is a new research field that is urgently needed to characterize the viscoelastic of the PU mixture under different conditions. In this paper, five master curve models, five shift factor equations, and four error minimization methods were introduced to fitting the phase angle master curve of the PU mixture. The results analysis indicated that the master curves fitted by different error minimization methods had small differences when the loading frequency was higher than 10−3 Hz. The R2 maximization as the main constraint and the others as the additional constraints were recommended as the error minimization method. The combination of the Christensen Anderson and Marasteanu model (CAM) and kaelble shift factor equation was recommended for fitting the phase angle master curve of the PU mixture. The phase angle master curve of the PU mixture did not follow the “Bell” shape of the asphalt mixture. The PU mixture with smaller temperature susceptibility would still be subject to the PU at higher temperatures and was closer to that of the viscoelastic material. The phase angle master curve construction was analyzed for the first time and proper master curve fitting parameters were recommended for pavement performance predicting and analyzing.
Open AccessStudy on the Phase Angle Master Curve of the Polyurethane Mixture with Dense Gradation
The phase angle master curve of the PU mixture is a new research field that is urgently needed to characterize the viscoelastic of the PU mixture under different conditions. In this paper, five master curve models, five shift factor equations, and four error minimization methods were introduced to fitting the phase angle master curve of the PU mixture. The results analysis indicated that the master curves fitted by different error minimization methods had small differences when the loading frequency was higher than 10−3 Hz. The R2 maximization as the main constraint and the others as the additional constraints were recommended as the error minimization method. The combination of the Christensen Anderson and Marasteanu model (CAM) and kaelble shift factor equation was recommended for fitting the phase angle master curve of the PU mixture. The phase angle master curve of the PU mixture did not follow the “Bell” shape of the asphalt mixture. The PU mixture with smaller temperature susceptibility would still be subject to the PU at higher temperatures and was closer to that of the viscoelastic material. The phase angle master curve construction was analyzed for the first time and proper master curve fitting parameters were recommended for pavement performance predicting and analyzing.
- Open Access
Study on the Construction of Dynamic Modulus Master Curve of Polyurethane Mixture with Dense Gradation
The PU mixture considered here is a new kind of pavement material with excellent road performance, which lacks study into its dynamic mechanical and viscoelastic properties. In this study, the dynamic modulus of the polyurethane (PU) mixture was fitted by using five master curve models, five shift factor equations, and four error minimization methods. According to test results, the log–log plot form was able to more effectively display the differences between master curves. The solver method, the sum of square error minimization (≤0.02), proved to be more appropriate and accurate with higher fitting parameter results. The line of equality statistic and Pearson linear correlation analysis results demonstrated that WLF and Kaelble equations were appropriate for five master curve models with trend line R2 values higher than 0.98. The GLS and SCM model with the WLF equation had the most accurate master curve fitting results. The dynamic modulus master curve shape of the PU mixture did not follow the traditional smooth “S” shape and did not show the ultimate dynamic modulus at extreme frequency. The viscoelasticity of the PU mixture is quite different from that of the asphalt mixture. This study recommended the most accurate error minimization method, the master curve model, and shift factor equations for characterizing the dynamic properties of the PU mixture.
Open AccessStudy on the Construction of Dynamic Modulus Master Curve of Polyurethane Mixture with Dense Gradation
The PU mixture considered here is a new kind of pavement material with excellent road performance, which lacks study into its dynamic mechanical and viscoelastic properties. In this study, the dynamic modulus of the polyurethane (PU) mixture was fitted by using five master curve models, five shift factor equations, and four error minimization methods. According to test results, the log–log plot form was able to more effectively display the differences between master curves. The solver method, the sum of square error minimization (≤0.02), proved to be more appropriate and accurate with higher fitting parameter results. The line of equality statistic and Pearson linear correlation analysis results demonstrated that WLF and Kaelble equations were appropriate for five master curve models with trend line R2 values higher than 0.98. The GLS and SCM model with the WLF equation had the most accurate master curve fitting results. The dynamic modulus master curve shape of the PU mixture did not follow the traditional smooth “S” shape and did not show the ultimate dynamic modulus at extreme frequency. The viscoelasticity of the PU mixture is quite different from that of the asphalt mixture. This study recommended the most accurate error minimization method, the master curve model, and shift factor equations for characterizing the dynamic properties of the PU mixture.
- Open Access
Study on the Influence Factors of Dynamic Modulus and Phase Angle of Dense Gradation Polyurethane Mixture
Polyurethane (PU) mixture is a new pavement material with excellent pavement performance, and most research was focused on the enhancement of pavement performance, but rarely on the dynamic property. This paper studied the factors including gradation, aggregate type, PU type, and PU content, which may influence the dynamic property of the PU mixture. Test results showed that the PU mixture is a kind of linear viscoelastic material, its dynamic modulus and phase angle changed with test temperature and loading frequency, the dynamic modulus would drop by 40%~50% with the temperature raised from 5 °C to 55 °C. All of the factors could affect the dynamic property of the PU mixture which was proved by the analysis of covariance. The effect of gradation did not change with the increase of the nominal maximum aggregate size (NMAS), the dynamic modulus of the PU mixture with limestone was higher than that of the PU mixture with basalt, and the curing speed of PU could affect the ultimate stiffness of the PU mixture, and the increase of the PU content did not help in the increase of the dynamic modulus of the PU mixture. So, more consideration about the selection of gradation, aggregate type, PU type, and PU content should be taken into the design of the PU mixture, which could produce the best pavement structure combination and save more investment.
Open AccessStudy on the Influence Factors of Dynamic Modulus and Phase Angle of Dense Gradation Polyurethane Mixture
Polyurethane (PU) mixture is a new pavement material with excellent pavement performance, and most research was focused on the enhancement of pavement performance, but rarely on the dynamic property. This paper studied the factors including gradation, aggregate type, PU type, and PU content, which may influence the dynamic property of the PU mixture. Test results showed that the PU mixture is a kind of linear viscoelastic material, its dynamic modulus and phase angle changed with test temperature and loading frequency, the dynamic modulus would drop by 40%~50% with the temperature raised from 5 °C to 55 °C. All of the factors could affect the dynamic property of the PU mixture which was proved by the analysis of covariance. The effect of gradation did not change with the increase of the nominal maximum aggregate size (NMAS), the dynamic modulus of the PU mixture with limestone was higher than that of the PU mixture with basalt, and the curing speed of PU could affect the ultimate stiffness of the PU mixture, and the increase of the PU content did not help in the increase of the dynamic modulus of the PU mixture. So, more consideration about the selection of gradation, aggregate type, PU type, and PU content should be taken into the design of the PU mixture, which could produce the best pavement structure combination and save more investment.
- Open Access
Mechanism of Polyurethane Binder Curing Reaction and Evaluation of Polyurethane Mixture Properties
This study focuses on analyzing the curing reaction mechanism of polyurethane (PU) binders and comprehensively evaluating the PU mixture’s properties. The former was investigated by conducting a Fourier transform infrared spectroscopy (FTIR) test on PU binders with different curing times. The volume change characteristics, construction operation time, and strength formation law were clarified through the splitting tensile test of PU mixtures under different environmental conditions. The optimal PU mixture stacking time and curing time under different environmental conditions were determined. The properties of the PU mixture and asphalt mixture were evaluated and compared through a rutting test, low-temperature bending test, freeze–thaw splitting test, and four-point bending fatigue test. The results show that the physical and chemical curing of the PU binder occurred within the first 24 h of curing, and the reaction speed gradually accelerated to form a polyurea structure 24 h later. It is recommended to stack the PU mixture for 4 h before compaction and to cure it for 2 days before opening under the conditions of 50% humidity and 15–40 °C surrounding temperature. The PU mixture shows better temperature stability and fatigue resistance than the asphalt mixture, and the splitting tensile strength of the PU mixture before and after the freeze–thaw splitting test is also higher. It is clear that the PU mixture is a green road building material with good performance.
Open AccessMechanism of Polyurethane Binder Curing Reaction and Evaluation of Polyurethane Mixture Properties
This study focuses on analyzing the curing reaction mechanism of polyurethane (PU) binders and comprehensively evaluating the PU mixture’s properties. The former was investigated by conducting a Fourier transform infrared spectroscopy (FTIR) test on PU binders with different curing times. The volume change characteristics, construction operation time, and strength formation law were clarified through the splitting tensile test of PU mixtures under different environmental conditions. The optimal PU mixture stacking time and curing time under different environmental conditions were determined. The properties of the PU mixture and asphalt mixture were evaluated and compared through a rutting test, low-temperature bending test, freeze–thaw splitting test, and four-point bending fatigue test. The results show that the physical and chemical curing of the PU binder occurred within the first 24 h of curing, and the reaction speed gradually accelerated to form a polyurea structure 24 h later. It is recommended to stack the PU mixture for 4 h before compaction and to cure it for 2 days before opening under the conditions of 50% humidity and 15–40 °C surrounding temperature. The PU mixture shows better temperature stability and fatigue resistance than the asphalt mixture, and the splitting tensile strength of the PU mixture before and after the freeze–thaw splitting test is also higher. It is clear that the PU mixture is a green road building material with good performance.