SCShiping Cui

Shiping Cui

*This is an algorithmically generated author record based on publicly available information.

Shiping Cui has a total of 23 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Study on the Application of Kramers–Kronig Relation for Polyurethane Mixture

    by Haisheng Zhao, Quanjun Shen, Peiyu Zhang, Zhen Li, Shiping Cui, Lin Wang, Wensheng Zhang, Chunhua Su, Shijie Ma

    Polyurethane (PU) mixture, which is a new pavement mixture, exhibits different dynamic properties compared to a hot-mixed asphalt mixture (HMA). This paper analyzed whether the Kramers–Kronig (K–K) relation and thermorheologically simple properties applied to the PU mixture. Based on the results, the PU mixture exhibited thermorheologically simple properties within the test conditions. The time–temperature superposition principle (TTSP) was applicable for the PU mixture to construct a dynamic modulus master curve using the standard logistic sigmoidal (SLS) model, the generalized logistic sigmoidal (GLS) model, and the Havriliak–Negami (HN) model. The Hilbert integral transformed SLS and GLS models for the phase angle can accurately fit the measured phase angle data with newly fitted shift factors and predict the phase angle within the viscoelastic range. The core–core and black space diagrams both displayed single continuous smooth curves, which can be utilized to characterize the viscoelastic property of the PU mixture. The K–K relation is applicable for the PU mixture to obtain the phase angle master curve model, storage modulus, and loss modulus from the complex modulus test results with the test temperatures and loading frequencies. The phase angle of the PU mixture at extremely high or low test temperatures cannot be derived from the dynamic modulus data.


  • Open Access

    Study on the Application of Kramers−Kronig Relation for the Polyurethane Mixture

    by Haisheng Zhao, Quanjun Shen, Peiyu Zhang, Zhen Li, Shiping Cui, Lin Wang, Wensheng Zhang, Chunhua Su, Shijie Ma

    The Polyurethane (PU) mixture is a high−performance engineering material with different dynamic properties compared to a hot−mixed asphalt mixture (HMA). This paper analyzed whether the Kramers−Kronig (K−K) relation and thermo−rheological simple properties were applicable to the PU mixture. Based on the result discussion, the PU mixture exhibited thermo−rheological simple properties within the test conditions. The time−temperature superposition principle (TTSP) was applicable for the PU mixture to construct the dynamic modulus master curve using the standard logistic Sigmoidal (SLS) model, the generalized logistic sigmoidal (GLS) model, and the Havriliak−Negami (HN) model. The Hilbert integral transformed SLS and GLS models for the phase angle can accurately fit the measured phase angle data with newly fitted shift factors and predict the phase angle within the viscoelastic range. The Core−Core and black space diagrams both displayed single continuous smooth curves, which can be utilized to characterize the viscoelastic property of the PU mixture. The K−K relation is applicable for the PU mixture to obtain the phase angle master curve model, storage modulus, and loss modulus from the complex modulus test results. The phase angle of the PU mixture cannot be derived from the dynamic modulus data and currently needs to be derived from the laboratory measurement.

  • Open Access

    Modeling the Dynamic Properties of the Polyurethane Mixture with Dense Gradation Using the 2S2P1D Model

    by Haisheng Zhao, Wenbin Gao, Shiping Cui, Zhen Li, Peiyu Zhang, Lin Wang, Wensheng Zhang, Chunhua Su, Shijie Ma

    The polyurethane (PU) mixture is a zero-emission and high-performance engineering mixture that could replace traditional asphalt mixtures for pavement paving. This paper investigated the feasibility of using the 2S2P1D model to characterize the linear viscoelastic (LVE) properties of the PU mixture in comparison to the styrene–butadiene–styrene (SBS)-modified asphalt mixture with identical aggregate gradation and binder content. The PU mixture showed higher prediction precision for dynamic modulus and lower prediction precision for phase angle compared to the SBS-modified asphalt mixture. The seven constants of the 2S2P1D model for the PU mixture differed significantly from those of the SBS-modified asphalt mixture. The PU mixture exhibited higher elastic properties and lower creep properties, but the viscous properties represented by the index of η were different from the loss dynamic modulus, which reflected the mixture’s viscous properties. The index η cannot accurately characterize the viscous properties of the PU mixture. The 2S2P1D model exhibited a higher prediction accuracy than the Sigmoidal Christensen Anderson and Marasteanu (SCM) model and could accurately simulate the LVE properties of the PU- and SBS-modified asphalt mixtures. However, the 2S2P1D model should enhance the creep and dashpot elements to provide a more accurate characterization of the properties of the PU mixture.


  • Open Access

    Study on the Influence Factors of the Dynamic Property of the Polyurethane Mixture with Dense Gradation

    by Haisheng Zhao, Shiping Cui, Zhen Li, Shaobin Wang, Lin Wang, Wensheng Zhang, Chunhua Su, Peiyu Zhang, Shijie Ma

    Similar to the asphalt mixture, the polyurethane (PU) mixture’s performance and characteristics are dependent on many variables. In this study, six variables, including aggregate gradation (limestone and basalt), aggregate type, PU type, PU content, and curing condition, and several parameter analyzing methods were chosen to determine the effect of variables on the dynamic property, rheological property, and rutting resistance of the PU mixture. The limestone aggregate gradation exhibited a substantial effect on the dynamic property, rheological property, and rutting resistance of the PU mixture; the basalt aggregate gradation exhibited significant influence on the dynamic property and rutting resistance, but a moderate effect on the rheological property. The aggregate type could influence the rheological property and rutting resistance. The slow curing speed of the PU binder decreased the dynamic modulus and rutting resistance but did not influence the phase angle. The rise in PU binder content would only improve the PU mixture’s resistance to rutting. The curing condition and color additive had no impact on the PU mixture’s properties. The generalized logistic sigmoidal (GLS) and Christensen Anderson and Marasteanu model (CAM) models could precisely predict the dynamic modulus and phase angle respectively disregarding the PU mixture features. PUM-10/B exhibited the greatest rutting resistance. The findings will aid in comprehending the properties and influencing factors of the PU mixture as well as in designing the desired mixture.


  • Open Access

    Study on the Dynamic Performance of PU and SBS-Modified Asphalt Mixtures with Dense Gradation

    by Haisheng Zhao, Wenbin Gao, Shiping Cui, Wensheng Zhang, Shijie Ma, Baoji Miao, Chunhua Su, Peiyu Zhang, Xiaoyan Wang, Jincheng Wei

    A polyurethane (PU) mixture with excellent strength is regarded as an alternative to a modified asphalt mixture, but characteristic analysis on them is lacking. In this paper, the dynamic modulus of PU- and SBS-modified asphalt mixtures with the same gradation, aggregate type, and binder content was investigated and compared in terms of dynamic and viscoelastic properties. Compared with the SBS-modified asphalt mixture, the PU mixture with an extremely high dynamic modulus and reduced phase angle at high temperatures had lower temperature sensitivity, which allowed it to resist high-temperature deformation. While the phase angle did not show a statistically significant correlation, the dynamic modulus between the two mixtures did. The dynamic modulus and phase angle values of the PU mixture showed relatively small deviations and could be fitted to produce acceptable master curves, which exhibited obvious differences compared to those of the SBS-modified asphalt mixture. The PU mixture exhibited elastic properties during the test temperature range and, since its thermal rheological property is much smaller than that of the SBS-modified asphalt mixture, it is closer to viscoelastic material. This study provides an understanding of the PU mixture’s dynamic and viscoelastic properties, as well as material information for pavement design and performance prediction with PU mixture layers.


  • Open Access

    Study on the Phase Angle Master Curve of the Polyurethane Mixture with Dense Gradation

    by Haisheng Zhao, Xiufen Wang, Shiping Cui, Bin Jiang, Shijie Ma, Wensheng Zhang, Peiyu Zhang, Xiaoyan Wang, Jincheng Wei, Shan Liu

    The phase angle master curve of the PU mixture is a new research field that is urgently needed to characterize the viscoelastic of the PU mixture under different conditions. In this paper, five master curve models, five shift factor equations, and four error minimization methods were introduced to fitting the phase angle master curve of the PU mixture. The results analysis indicated that the master curves fitted by different error minimization methods had small differences when the loading frequency was higher than 10−3 Hz. The R2 maximization as the main constraint and the others as the additional constraints were recommended as the error minimization method. The combination of the Christensen Anderson and Marasteanu model (CAM) and kaelble shift factor equation was recommended for fitting the phase angle master curve of the PU mixture. The phase angle master curve of the PU mixture did not follow the “Bell” shape of the asphalt mixture. The PU mixture with smaller temperature susceptibility would still be subject to the PU at higher temperatures and was closer to that of the viscoelastic material. The phase angle master curve construction was analyzed for the first time and proper master curve fitting parameters were recommended for pavement performance predicting and analyzing.


  • Open Access

    Study on the Construction of Dynamic Modulus Master Curve of Polyurethane Mixture with Dense Gradation

    by Haisheng Zhao, Wenbin Gao, Shiping Cui, Wensheng Zhang, Shijie Ma, Baoji Miao, Chunhua Su, Jincheng Wei, Shan Liu, Fuxiu Liu

    The PU mixture considered here is a new kind of pavement material with excellent road performance, which lacks study into its dynamic mechanical and viscoelastic properties. In this study, the dynamic modulus of the polyurethane (PU) mixture was fitted by using five master curve models, five shift factor equations, and four error minimization methods. According to test results, the log–log plot form was able to more effectively display the differences between master curves. The solver method, the sum of square error minimization (≤0.02), proved to be more appropriate and accurate with higher fitting parameter results. The line of equality statistic and Pearson linear correlation analysis results demonstrated that WLF and Kaelble equations were appropriate for five master curve models with trend line R2 values higher than 0.98. The GLS and SCM model with the WLF equation had the most accurate master curve fitting results. The dynamic modulus master curve shape of the PU mixture did not follow the traditional smooth “S” shape and did not show the ultimate dynamic modulus at extreme frequency. The viscoelasticity of the PU mixture is quite different from that of the asphalt mixture. This study recommended the most accurate error minimization method, the master curve model, and shift factor equations for characterizing the dynamic properties of the PU mixture.


  • Open Access

    Study on the Influence Factors of Dynamic Modulus and Phase Angle of Dense Gradation Polyurethane Mixture

    by Haisheng Zhao, Wensheng Zhang, Shiping Cui, Shijie Ma, Baoji Miao, Enzhou Di, Xiaoyan Wang, Chunhua Su, Jincheng Wei, Shan Liu

    Polyurethane (PU) mixture is a new pavement material with excellent pavement performance, and most research was focused on the enhancement of pavement performance, but rarely on the dynamic property. This paper studied the factors including gradation, aggregate type, PU type, and PU content, which may influence the dynamic property of the PU mixture. Test results showed that the PU mixture is a kind of linear viscoelastic material, its dynamic modulus and phase angle changed with test temperature and loading frequency, the dynamic modulus would drop by 40%~50% with the temperature raised from 5 °C to 55 °C. All of the factors could affect the dynamic property of the PU mixture which was proved by the analysis of covariance. The effect of gradation did not change with the increase of the nominal maximum aggregate size (NMAS), the dynamic modulus of the PU mixture with limestone was higher than that of the PU mixture with basalt, and the curing speed of PU could affect the ultimate stiffness of the PU mixture, and the increase of the PU content did not help in the increase of the dynamic modulus of the PU mixture. So, more consideration about the selection of gradation, aggregate type, PU type, and PU content should be taken into the design of the PU mixture, which could produce the best pavement structure combination and save more investment.


  • Open Access

    Study on Cold Recycled Asphalt Mixtures with Emulsified/Foamed Asphalt in the Laboratory and On-Site

    by Haisheng Zhao, Jianming Su, Shijie Ma, Chunhua Su, Xiaoyan Wang, Zengguang Li, Jincheng Wei, Shiping Cui

    Millions of tons of reclaimed asphalt pavement (RAP) and reclaimed aggregate or reclaimed inorganic binder stabilized aggregate (RAI) is produced every year in China. The cold recycled mixture (CRM) technology reduces fuel consumption, emissions, and cost and utilizes the high content of RAP. In this paper, six types of CRM with varying RAP/RAI composition and asphalt binders were investigated. The laboratory tests included strength indicators, high temperature stability, low temperature crack resistance, water stability, and dynamic modulus. A full-scale trial section was constructed after the laboratory tests. Except for low temperature failure strain without secondary compaction in the mixture design, test results illustrated that the performances of different CRMs met the specifications. The cement addition limited the thermo-viscoelastic behavior of the CRM. The RAI contents had reduced the water sensitivity of CRM, and the emulsified asphalt CRM had better performance than the foamed asphalt CRM. The performances of samples cored from the test section in the field met the specifications and were lower than that in the laboratory. The curing conditions in the field were not as effective as in the laboratory. The curing conditions and compaction method should simulate the conditions in the field to guide the CRM selection and mixture design.


  • Open Access

    Effect of Solid-Solid Phase Change Material’s Direct Interaction on Physical and Rheological Properties of Asphalt

    by Haisheng Zhao, Jianmin Guo, Shijie Ma, Huan Zhang, Chunhua Su, Xiaoyan Wang, Zengguang Li, Jincheng Wei, Shiping Cui

    Asphalt pavement is a temperature−sensitive structure that is prone to temperature-related diseases. Phase change material (PCM) is an excellent candidate for mitigating these diseases. This paper looked into the effects of indirect composite shape-stabilized PCM incorporation on the characteristics of asphalt. The compatibility, physical properties, and rheological properties of asphalt with various PCM content before and after aging were thoroughly investigated. No phase separation and no chemical reaction occurred between PCM and asphalt. The physical properties improved with the addition of PCM, and the high−temperature performance indexes improved while the low−temperature performance indexes decreased as the aging process progressed. The effects of PCM on the rheological properties of the matrix and SBS−modified asphalt was distinct. PCM was added to improve the high−temperature rheological characteristics of the matrix asphalt when the temperature was higher than 52 °C, while PCM reduced the high−temperature rheological properties of the SBS−modified asphalt. The aging process has an impact on the high−temperature rutting factor of asphalt with a high PCM content. The low−temperature creep behavior and PG grade of asphalt were both improved. The implication of PCM is that it cannot increase the thermoregulation of asphalt pavement without the cost of scarifying the performance of the asphalt or mixture.