Paul Molenda
Research Subjects
Paul Molenda has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Melvyn Alvarez Vera
Departamento de Ingeniería Industrial y Mecánica, Escuela de Ingeniería, Universidad de las Américas Puebla, Ex-Hacienda Santa Catarina Mártir S/N, Puebla 72810, Mexico
2 shared publications - Pablo Moreno Garibaldi
Departamento de Ingeniería Industrial y Mecánica, Escuela de Ingeniería, Universidad de las Américas Puebla, Ex-Hacienda Santa Catarina Mártir S/N, Puebla 72810, Mexico
2 shared publications - Rafael Carrera-Espinoza
Departamento de Ingeniería Industrial y Mecánica, Universidad de las Américas Puebla, Ex Hacienda Santa Catarina Mártir, San Andrés Cholula 72810, Mexico
2 shared publications Alejandro Gozález Rebattu Y González
Hospital Regional, Cirugía maxilofacial y cirugía plástica 1° de Octubre, ISSSTE, Av. Politécnico Nacional Colonia Lindavista #1669
1 shared publication- Anke Müller
Technische Universität Braunschweig
1 shared publication - Gustavo Hermínio Salati Marcondes de Moraes
University of Campinas
1 shared publication
Latest Publications
- Open Access
- 1 January 2026
- Published by Associacao Brasileira de Engenharia de Producao - ABEPRO in Production
- Vol. 36, e20250104
Transitioning to Industry 4.0: an expert-based assessment of critical success factors in large manufacturing companies in Brazil
Paper aims This study evaluates the readiness of large Brazilian manufacturing companies (LBMCs) for Industry 4.0 (I4.0) transition by assessing the extent to which critical success factors (CSFs) are addressed to enable digital transformation. Originality Moving beyond technology-centered perspectives, this paper advances the literature by examining technical-managerial readiness for I4.0 transition within an emerging economy. It reframes CSFs as organizational capabilities and shifts the analytical focus from factor identification to their implementation and institutional embedding. Research method A survey was conducted with twenty experts in the Brazilian manufacturing sector. The collected data were analyzed using a multicriteria decision-making approach suitable for information-constrained environments, and interpreted through a capability- and socio-technical lens. Main findings Most experts classify LBMCs as either superficially (35%) or reasonably (60%) prepared for I4.0 transition. Strategic–governance factors show comparatively higher levels of institutionalization, whereas organizational and technological capabilities remain less consolidated. Implications for theory and practice This study advances knowledge by reconceptualizing CSFs as organizational capabilities and shifting the analytical focus from factor identification toward their implementation and institutionalization within large manufacturing firms in emerging economies. It provides practical guidance for managers and policymakers to strengthen governance, workforce development, and coordinated digital transformation efforts.
- 1 January 2026
- Published by Associacao Brasileira de Engenharia de Producao - ABEPRO in Production
- Vol. 36, e20250104
Open AccessTransitioning to Industry 4.0: an expert-based assessment of critical success factors in large manufacturing companies in Brazil
Paper aims This study evaluates the readiness of large Brazilian manufacturing companies (LBMCs) for Industry 4.0 (I4.0) transition by assessing the extent to which critical success factors (CSFs) are addressed to enable digital transformation. Originality Moving beyond technology-centered perspectives, this paper advances the literature by examining technical-managerial readiness for I4.0 transition within an emerging economy. It reframes CSFs as organizational capabilities and shifts the analytical focus from factor identification to their implementation and institutional embedding. Research method A survey was conducted with twenty experts in the Brazilian manufacturing sector. The collected data were analyzed using a multicriteria decision-making approach suitable for information-constrained environments, and interpreted through a capability- and socio-technical lens. Main findings Most experts classify LBMCs as either superficially (35%) or reasonably (60%) prepared for I4.0 transition. Strategic–governance factors show comparatively higher levels of institutionalization, whereas organizational and technological capabilities remain less consolidated. Implications for theory and practice This study advances knowledge by reconceptualizing CSFs as organizational capabilities and shifting the analytical focus from factor identification toward their implementation and institutionalization within large manufacturing firms in emerging economies. It provides practical guidance for managers and policymakers to strengthen governance, workforce development, and coordinated digital transformation efforts.
- Open Access
- 27 June 2025
- Published by Springer Nature
- p. 580-589
Evaluation of Disruptive Business Models for Remanufacturing
The circular economy is an approach that aims to restore products and materials after their usage. Remanufacturing, as an element of the circular economy, enables sustainability through multiple product utilization cycles. The increasing digitalization, as well as the availability and exchange of information along the product life cycle, from its manufacture to the end of its life, offers new business opportunities for the remanufacturing industry. Instead of the traditional and established sale of remanufactured products, product-service systems are becoming more important. As a result, it is possible to open new markets and increase the acceptance of remanufactured products. This paper focuses on analyzing which disruptive business models will significantly impact the remanufacturing industry in the future. For this purpose, a systematic analysis of existing business models based on a literature review and the Business Model Navigator is first carried out. Disruptive business models for the remanufacturing industry are then evaluated with the help of the Business Model Canvas and Porter’s Value Chain. Their applicability to the remanufacturing industry is then determined based on established criteria.
- 27 June 2025
- Published by Springer Nature
- p. 580-589
Open AccessEvaluation of Disruptive Business Models for Remanufacturing
The circular economy is an approach that aims to restore products and materials after their usage. Remanufacturing, as an element of the circular economy, enables sustainability through multiple product utilization cycles. The increasing digitalization, as well as the availability and exchange of information along the product life cycle, from its manufacture to the end of its life, offers new business opportunities for the remanufacturing industry. Instead of the traditional and established sale of remanufactured products, product-service systems are becoming more important. As a result, it is possible to open new markets and increase the acceptance of remanufactured products. This paper focuses on analyzing which disruptive business models will significantly impact the remanufacturing industry in the future. For this purpose, a systematic analysis of existing business models based on a literature review and the Business Model Navigator is first carried out. Disruptive business models for the remanufacturing industry are then evaluated with the help of the Business Model Canvas and Porter’s Value Chain. Their applicability to the remanufacturing industry is then determined based on established criteria.
- Open Access
- 1 March 2024
- Published by MDPI AG in Journal of Manufacturing and Materials Processing
- Vol. 8 (2) , 48
Characterization of Microstructural and Mechanical Properties of 17-4 PH Stainless Steel by Cold Rolled and Machining vs. DMLS Additive Manufacturing
The 17-4 PH stainless steel is widely used in the aerospace, petrochemical, chemical, food, and general metallurgical industries. The present study was conducted to analyze the mechanical properties of two types of 17-4 PH stainless steel—commercial cold-rolled and direct metal laser sintering (DMLS) manufactured. This study employed linear and nonlinear tensile FEM simulations, combined with various materials characterization techniques such as tensile testing and nanoindentation. Moreover, microstructural analysis was performed using metallographic techniques, optical microscopy, scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS), and X-ray diffraction (XRD). The results on the microstructure for 17-4 PH DMLS stainless steel reveal the layers of melting due to the laser process characterized by complex directional columnar structures parallel to the DMLS build direction. The mechanical properties obtained from the simple tension test decreased by 17% for the elastic modulus, 7.8% for the yield strength, and 7% for the ultimate strength for 17-4 PH DMLS compared with rolled 17-4 PH stainless steel. The FEM simulation using the experimental tension test data revealed that the 17-4 PH DMLS stainless steel experienced a decrease in the yield strength of ~8% and in the ultimate strength of ~11%. A reduction of the yield strength of the material was obtained as the grain size increased.
- 1 March 2024
- Published by MDPI AG in Journal of Manufacturing and Materials Processing
- Vol. 8 (2) , 48
Open AccessCharacterization of Microstructural and Mechanical Properties of 17-4 PH Stainless Steel by Cold Rolled and Machining vs. DMLS Additive Manufacturing
The 17-4 PH stainless steel is widely used in the aerospace, petrochemical, chemical, food, and general metallurgical industries. The present study was conducted to analyze the mechanical properties of two types of 17-4 PH stainless steel—commercial cold-rolled and direct metal laser sintering (DMLS) manufactured. This study employed linear and nonlinear tensile FEM simulations, combined with various materials characterization techniques such as tensile testing and nanoindentation. Moreover, microstructural analysis was performed using metallographic techniques, optical microscopy, scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS), and X-ray diffraction (XRD). The results on the microstructure for 17-4 PH DMLS stainless steel reveal the layers of melting due to the laser process characterized by complex directional columnar structures parallel to the DMLS build direction. The mechanical properties obtained from the simple tension test decreased by 17% for the elastic modulus, 7.8% for the yield strength, and 7% for the ultimate strength for 17-4 PH DMLS compared with rolled 17-4 PH stainless steel. The FEM simulation using the experimental tension test data revealed that the 17-4 PH DMLS stainless steel experienced a decrease in the yield strength of ~8% and in the ultimate strength of ~11%. A reduction of the yield strength of the material was obtained as the grain size increased.
- Open Access
- 1 January 2021
- Published by Elsevier in Procedia CIRP
- Vol. 104, 1662-1667
Multi-objective operating point optimization of manufacturing systems
- 1 January 2021
- Published by Elsevier in Procedia CIRP
- Vol. 104, 1662-1667
Open AccessMulti-objective operating point optimization of manufacturing systems