Lu Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Lu Zhang has a total of 48 co-authors. Here are the top co-authors by number of shared publications:
- Xingying Zhang
Key Laboratory of Radiometric Calibration and Validation for Environmental Satellites, National Satellite Meteorological Center (National Center for Space Weather), Innovation Center for FengYun Meteorological Satellite (FYSIC), China Meteorological Administration (CMA), Beijing, 100081, China
5 shared publications - Peng Zhang
Meteorological Observation Center, China Meteorological Administration (CMA), Beijing, 100081, China
4 shared publications - Xifeng Cao
Chinese Academy of Meteorological Sciences, China Meteorological Administration, Beijing 100081, China
4 shared publications - Yuhan Jiang
Chinese Academy of Meteorological Sciences, China Meteorological Administration, Beijing 100081, China
3 shared publications - Chuncan Fan
Wangzhijiang Innovation Center for Laser, Aerospace Laser Technology and System Department, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai, 201800, China
2 shared publications Jinrui Guo
State Key Laboratory of Environment Characteristics and Effects for Near-space, Nanjing University of Information Science and Technology, Nanjing, 210044, China
2 shared publications
Latest Publications
- Open Access
- 22 September 2026
- Published by MDPI AG in Remote Sensing
- Vol. 18 (19) , 3266
Estimating Ground-Level PM2.5 over Beijing–Tianjin–Hebei from DQ-1 Wide-Swath Imager Signals and ERA5 Meteorology Using Physics-Guided Feature Engineering
The DaQi-1 (DQ-1) Wide-Swath Imager (WSI) combines an approximately 2300 km swath with 15 visible-to-shortwave-infrared channels at 75–600 m resolution, providing broad regional coverage and flexible spectral support. We developed an ExtraTrees estimator from WSI signals and ERA5 planetary boundary-layer height, winds, and relative humidity for Beijing–Tianjin–Hebei in 2024. H5 footprints placed verified daylight overpasses between 04:45 and 05:38 UTC, making 05:00 UTC the nearest available ERA5 field for all 96 dates. Multispectral screening retained 12,768 North China records; the strict benchmark used 4210 records from 65 stations. The pre-specified date split selected B3 (0.470 μm), but ten repeated balanced date-block allocations found no stable single-band winner (B3 mean R2 = 0.3373 ± 0.0311; highest mean, B14 = 0.3506 ± 0.0274). In a controlled date-grouped ablation, B3 plus meteorology and physics-guided terms achieved R2 = 0.1516; adding coordinates increased R2 to 0.1640, whereas adding calendar encodings increased it to 0.3919. This full contextual configuration was used only for within-2024 mapping. The primary coordinate- and calendar-free joint date–station benchmark yielded R2 = 0.1643 for ExtraTrees with WSI plus meteorology, compared with 0.1085 for meteorology alone and −0.2349 for WSI alone. Ninety-seven scenes produced 11 monthly composites. CHAP comparison yielded pooled pixel–month r = 0.799 and city–month r = 0.830, but May and July agreement was near zero and October differed by −16.01 μg m−3. Bias above 200 μg m−3 was −158.27 μg m−3 under date blocking. The results support a conditional WSI contribution within a meteorology-dominated estimator; they do not establish a stable optimal band, an independent radiometric retrieval, or reliable severe-event exposure estimates.
- 22 September 2026
- Published by MDPI AG in Remote Sensing
- Vol. 18 (19) , 3266
Open AccessEstimating Ground-Level PM2.5 over Beijing–Tianjin–Hebei from DQ-1 Wide-Swath Imager Signals and ERA5 Meteorology Using Physics-Guided Feature Engineering
The DaQi-1 (DQ-1) Wide-Swath Imager (WSI) combines an approximately 2300 km swath with 15 visible-to-shortwave-infrared channels at 75–600 m resolution, providing broad regional coverage and flexible spectral support. We developed an ExtraTrees estimator from WSI signals and ERA5 planetary boundary-layer height, winds, and relative humidity for Beijing–Tianjin–Hebei in 2024. H5 footprints placed verified daylight overpasses between 04:45 and 05:38 UTC, making 05:00 UTC the nearest available ERA5 field for all 96 dates. Multispectral screening retained 12,768 North China records; the strict benchmark used 4210 records from 65 stations. The pre-specified date split selected B3 (0.470 μm), but ten repeated balanced date-block allocations found no stable single-band winner (B3 mean R2 = 0.3373 ± 0.0311; highest mean, B14 = 0.3506 ± 0.0274). In a controlled date-grouped ablation, B3 plus meteorology and physics-guided terms achieved R2 = 0.1516; adding coordinates increased R2 to 0.1640, whereas adding calendar encodings increased it to 0.3919. This full contextual configuration was used only for within-2024 mapping. The primary coordinate- and calendar-free joint date–station benchmark yielded R2 = 0.1643 for ExtraTrees with WSI plus meteorology, compared with 0.1085 for meteorology alone and −0.2349 for WSI alone. Ninety-seven scenes produced 11 monthly composites. CHAP comparison yielded pooled pixel–month r = 0.799 and city–month r = 0.830, but May and July agreement was near zero and October differed by −16.01 μg m−3. Bias above 200 μg m−3 was −158.27 μg m−3 under date blocking. The results support a conditional WSI contribution within a meteorology-dominated estimator; they do not establish a stable optimal band, an independent radiometric retrieval, or reliable severe-event exposure estimates.
- Open Access
- 20 September 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-33
Comment on egusphere-2026-3759
Carbon dioxide (CO2) is one of the most important anthropogenic greenhouse gases in the atmosphere, and accurate monitoring of CO2 concentration is essential for carbon flux inversion and emission reduction policies. Spaceborne integrated path differential absorption (IPDA) lidar enables day-and-night observations, high-latitude coverage, and reduced sensitivity to clouds and aerosols, showing great potential for monitoring the column-averaged dry-air mole fraction of CO2 (XCO2). However, single-shot XCO2 retrievals from spaceborne IPDA lidar generally have relatively large random errors, and their along-track averaging is affected by surface conditions and data gaps. Based on 2023 DQ-1 spaceborne IPDA lidar observations, this study calculated global single-shot XCO2 random errors using the return-signal SNRs at the online and offline wavelengths. The results show pronounced spatial heterogeneity in single-shot random errors. Larger errors occur over water bodies, permanent snow and ice, and some complex land cover types, whereas day–night differences are relatively weak. Combining MCD12C1 land cover data with random-error statistics, the global observation scenes were classified into four surface random-error categories. Allan variance analysis of continuous observation segments suggests averaging approximately 160, 200, 232, and 296 observations for the four categories, corresponding to typical along-track scales of about 54, 67, 77, and 100 km. To address data gaps and along-track discontinuities, fixed-spatial-resolution and random-error-threshold-controlled averaging strategies were compared. The fixed-spatial-resolution strategy maintains more stable spatial representativeness and is more suitable as the default averaging option, whereas the threshold-controlled strategy improves error consistency but may substantially expand the averaging window. For land–sea boundaries and other rapid surface-transition regions, a boundary mixed dynamic averaging strategy was further proposed, with surface-category fractions recommended as quality indicators. These results support random-error evaluation and averaging-strategy design for spaceborne IPDA lidar XCO2 products.
- 20 September 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-33
Open AccessComment on egusphere-2026-3759
Carbon dioxide (CO2) is one of the most important anthropogenic greenhouse gases in the atmosphere, and accurate monitoring of CO2 concentration is essential for carbon flux inversion and emission reduction policies. Spaceborne integrated path differential absorption (IPDA) lidar enables day-and-night observations, high-latitude coverage, and reduced sensitivity to clouds and aerosols, showing great potential for monitoring the column-averaged dry-air mole fraction of CO2 (XCO2). However, single-shot XCO2 retrievals from spaceborne IPDA lidar generally have relatively large random errors, and their along-track averaging is affected by surface conditions and data gaps. Based on 2023 DQ-1 spaceborne IPDA lidar observations, this study calculated global single-shot XCO2 random errors using the return-signal SNRs at the online and offline wavelengths. The results show pronounced spatial heterogeneity in single-shot random errors. Larger errors occur over water bodies, permanent snow and ice, and some complex land cover types, whereas day–night differences are relatively weak. Combining MCD12C1 land cover data with random-error statistics, the global observation scenes were classified into four surface random-error categories. Allan variance analysis of continuous observation segments suggests averaging approximately 160, 200, 232, and 296 observations for the four categories, corresponding to typical along-track scales of about 54, 67, 77, and 100 km. To address data gaps and along-track discontinuities, fixed-spatial-resolution and random-error-threshold-controlled averaging strategies were compared. The fixed-spatial-resolution strategy maintains more stable spatial representativeness and is more suitable as the default averaging option, whereas the threshold-controlled strategy improves error consistency but may substantially expand the averaging window. For land–sea boundaries and other rapid surface-transition regions, a boundary mixed dynamic averaging strategy was further proposed, with surface-category fractions recommended as quality indicators. These results support random-error evaluation and averaging-strategy design for spaceborne IPDA lidar XCO2 products.
- Open Access
- 22 August 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-33
Comment on egusphere-2026-3759
Carbon dioxide (CO2) is one of the most important anthropogenic greenhouse gases in the atmosphere, and accurate monitoring of CO2 concentration is essential for carbon flux inversion and emission reduction policies. Spaceborne integrated path differential absorption (IPDA) lidar enables day-and-night observations, high-latitude coverage, and reduced sensitivity to clouds and aerosols, showing great potential for monitoring the column-averaged dry-air mole fraction of CO2 (XCO2). However, single-shot XCO2 retrievals from spaceborne IPDA lidar generally have relatively large random errors, and their along-track averaging is affected by surface conditions and data gaps. Based on 2023 DQ-1 spaceborne IPDA lidar observations, this study calculated global single-shot XCO2 random errors using the return-signal SNRs at the online and offline wavelengths. The results show pronounced spatial heterogeneity in single-shot random errors. Larger errors occur over water bodies, permanent snow and ice, and some complex land cover types, whereas day–night differences are relatively weak. Combining MCD12C1 land cover data with random-error statistics, the global observation scenes were classified into four surface random-error categories. Allan variance analysis of continuous observation segments suggests averaging approximately 160, 200, 232, and 296 observations for the four categories, corresponding to typical along-track scales of about 54, 67, 77, and 100 km. To address data gaps and along-track discontinuities, fixed-spatial-resolution and random-error-threshold-controlled averaging strategies were compared. The fixed-spatial-resolution strategy maintains more stable spatial representativeness and is more suitable as the default averaging option, whereas the threshold-controlled strategy improves error consistency but may substantially expand the averaging window. For land–sea boundaries and other rapid surface-transition regions, a boundary mixed dynamic averaging strategy was further proposed, with surface-category fractions recommended as quality indicators. These results support random-error evaluation and averaging-strategy design for spaceborne IPDA lidar XCO2 products.
- 22 August 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-33
Open AccessComment on egusphere-2026-3759
Carbon dioxide (CO2) is one of the most important anthropogenic greenhouse gases in the atmosphere, and accurate monitoring of CO2 concentration is essential for carbon flux inversion and emission reduction policies. Spaceborne integrated path differential absorption (IPDA) lidar enables day-and-night observations, high-latitude coverage, and reduced sensitivity to clouds and aerosols, showing great potential for monitoring the column-averaged dry-air mole fraction of CO2 (XCO2). However, single-shot XCO2 retrievals from spaceborne IPDA lidar generally have relatively large random errors, and their along-track averaging is affected by surface conditions and data gaps. Based on 2023 DQ-1 spaceborne IPDA lidar observations, this study calculated global single-shot XCO2 random errors using the return-signal SNRs at the online and offline wavelengths. The results show pronounced spatial heterogeneity in single-shot random errors. Larger errors occur over water bodies, permanent snow and ice, and some complex land cover types, whereas day–night differences are relatively weak. Combining MCD12C1 land cover data with random-error statistics, the global observation scenes were classified into four surface random-error categories. Allan variance analysis of continuous observation segments suggests averaging approximately 160, 200, 232, and 296 observations for the four categories, corresponding to typical along-track scales of about 54, 67, 77, and 100 km. To address data gaps and along-track discontinuities, fixed-spatial-resolution and random-error-threshold-controlled averaging strategies were compared. The fixed-spatial-resolution strategy maintains more stable spatial representativeness and is more suitable as the default averaging option, whereas the threshold-controlled strategy improves error consistency but may substantially expand the averaging window. For land–sea boundaries and other rapid surface-transition regions, a boundary mixed dynamic averaging strategy was further proposed, with surface-category fractions recommended as quality indicators. These results support random-error evaluation and averaging-strategy design for spaceborne IPDA lidar XCO2 products.
- Open Access
- 18 March 2025
- Published by Copernicus GmbH
The calibration and validation of XCO2 measured by Lidar onboard DQ-
Atmospheric carbon dioxide (CO2) is the primary anthropogenic driver of climate change, accounting for more than half of the total effective radiative forcing (ERF). The accurate monitoring of carbon dioxide is essential to study the global carbon cycle and radiation budget on Earth.The Aerosol and Carbon Detection Lidar (ACDL) instrument, as the first space-borne integrated path differential absorption (IPDA) light detection and ranging (Lidar) for XCO2, was successfully launched in April 2022 onboard the DaQi-1 (DQ-1) satellite.During the two years of on-orbit operation, we constantly updated the processing methods, including the spectral broadening of CO2 caused by water vapor, etc. Finally, we calibrated and validated the CO2 retrieved by DQ-1 usingTCCON and COCOON, and the results showed that the deviation reached the satellite design demand (1ppm).
- 18 March 2025
- Published by Copernicus GmbH
Open AccessThe calibration and validation of XCO2 measured by Lidar onboard DQ-
Atmospheric carbon dioxide (CO2) is the primary anthropogenic driver of climate change, accounting for more than half of the total effective radiative forcing (ERF). The accurate monitoring of carbon dioxide is essential to study the global carbon cycle and radiation budget on Earth.The Aerosol and Carbon Detection Lidar (ACDL) instrument, as the first space-borne integrated path differential absorption (IPDA) light detection and ranging (Lidar) for XCO2, was successfully launched in April 2022 onboard the DaQi-1 (DQ-1) satellite.During the two years of on-orbit operation, we constantly updated the processing methods, including the spectral broadening of CO2 caused by water vapor, etc. Finally, we calibrated and validated the CO2 retrieved by DQ-1 usingTCCON and COCOON, and the results showed that the deviation reached the satellite design demand (1ppm).
- Open Access
- 13 February 2025
- Published by MDPI AG in Remote Sensing
- Vol. 17 (4) , 634
Instrument Performance Analysis for Methane Point Source Retrieval and Estimation Using Remote Sensing Technique
The effective monitoring of methane (CH4) point sources is important for climate change research. Satellite-based observations have demonstrated significant potential for emission estimation. In this study, the methane plumes with different emission rates are modelled and pseudo-observations with diverse spatial resolution, spectral resolution, and signal-to-noise ratios (SNR) are simulated by the radiative transfer model. The iterative maximum a posteriori–differential optical absorption spectroscopy (IMAP-DOAS) algorithm is applied to retrieve the column-averaged methane dry air mole fraction (XCH4), a three-dimensional matrix of estimated plume emission rates is then constructed. The results indicate that an optimal plume estimation requires high spatial and spectral resolution alongside an adequate SNR. While a spatial resolution degradation within 120 m has little impact on quantification, a high spatial resolution is important for detecting low-emission plumes. Additionally, a fine spectral resolution (<5 nm) is more beneficial than a higher SNR for precise plume retrieval. Scientific SNR settings can also help to accurately quantify methane plumes, but there is no need to pursue an overly extreme SNR. Finally, miniaturized spectroscopic systems, such as dispersive spectrometers or Fabry–Pérot interferometers, meet current detection needs, offering a faster and resource-efficient deployment pathway. The results can provide a reference for the development of current detection instruments for methane plumes.
- 13 February 2025
- Published by MDPI AG in Remote Sensing
- Vol. 17 (4) , 634
Open AccessInstrument Performance Analysis for Methane Point Source Retrieval and Estimation Using Remote Sensing Technique
The effective monitoring of methane (CH4) point sources is important for climate change research. Satellite-based observations have demonstrated significant potential for emission estimation. In this study, the methane plumes with different emission rates are modelled and pseudo-observations with diverse spatial resolution, spectral resolution, and signal-to-noise ratios (SNR) are simulated by the radiative transfer model. The iterative maximum a posteriori–differential optical absorption spectroscopy (IMAP-DOAS) algorithm is applied to retrieve the column-averaged methane dry air mole fraction (XCH4), a three-dimensional matrix of estimated plume emission rates is then constructed. The results indicate that an optimal plume estimation requires high spatial and spectral resolution alongside an adequate SNR. While a spatial resolution degradation within 120 m has little impact on quantification, a high spatial resolution is important for detecting low-emission plumes. Additionally, a fine spectral resolution (<5 nm) is more beneficial than a higher SNR for precise plume retrieval. Scientific SNR settings can also help to accurately quantify methane plumes, but there is no need to pursue an overly extreme SNR. Finally, miniaturized spectroscopic systems, such as dispersive spectrometers or Fabry–Pérot interferometers, meet current detection needs, offering a faster and resource-efficient deployment pathway. The results can provide a reference for the development of current detection instruments for methane plumes.
- Open Access
- 3 April 2024
- Published by MDPI AG in Atmosphere
- Vol. 15 (4) , 449
Methane Retrieval Algorithms Based on Satellite: A Review
As the second most predominant greenhouse gas, methane-targeted emission mitigation holds the potential to decelerate the pace of global warming. Satellite remote sensing is an important monitoring tool, and we review developments in the satellite detection of methane. This paper provides an overview of the various types of satellites, including the various instrument parameters, and describes the different types of satellite retrieval algorithms. In addition, the currently popular methane point source quantification method is presented. Based on existing research, we delineate the classification of methane remote sensing satellites into two overarching categories: area flux mappers and point source imagers. Area flux mappers primarily concentrate on the assessment of global or large-scale methane concentrations, with a further subclassification into active remote sensing satellites (e.g., MERLIN) and passive remote sensing satellites (e.g., TROPOMI, GOSAT), contingent upon the remote sensing methodology employed. Such satellites are mainly based on physical models and the carbon dioxide proxy method for the retrieval of methane. Point source imagers, in contrast, can detect methane point source plumes using their ultra-high spatial resolution. Subcategories within this classification include multispectral imagers (e.g., Sentinel-2, Landsat-8) and hyperspectral imagers (e.g., PRISMA, GF-5), contingent upon their spectral resolution disparities. Area flux mappers are mostly distinguished by their use of physical algorithms, while point source imagers are dominated by data-driven methods. Furthermore, methane plume emissions can be accurately quantified through the utilization of an integrated mass enhancement model. Finally, a prediction of the future trajectory of methane remote sensing satellites is presented, in consideration of the current landscape. This paper aims to provide basic theoretical support for subsequent scientific research.
- 3 April 2024
- Published by MDPI AG in Atmosphere
- Vol. 15 (4) , 449
Open AccessMethane Retrieval Algorithms Based on Satellite: A Review
As the second most predominant greenhouse gas, methane-targeted emission mitigation holds the potential to decelerate the pace of global warming. Satellite remote sensing is an important monitoring tool, and we review developments in the satellite detection of methane. This paper provides an overview of the various types of satellites, including the various instrument parameters, and describes the different types of satellite retrieval algorithms. In addition, the currently popular methane point source quantification method is presented. Based on existing research, we delineate the classification of methane remote sensing satellites into two overarching categories: area flux mappers and point source imagers. Area flux mappers primarily concentrate on the assessment of global or large-scale methane concentrations, with a further subclassification into active remote sensing satellites (e.g., MERLIN) and passive remote sensing satellites (e.g., TROPOMI, GOSAT), contingent upon the remote sensing methodology employed. Such satellites are mainly based on physical models and the carbon dioxide proxy method for the retrieval of methane. Point source imagers, in contrast, can detect methane point source plumes using their ultra-high spatial resolution. Subcategories within this classification include multispectral imagers (e.g., Sentinel-2, Landsat-8) and hyperspectral imagers (e.g., PRISMA, GF-5), contingent upon their spectral resolution disparities. Area flux mappers are mostly distinguished by their use of physical algorithms, while point source imagers are dominated by data-driven methods. Furthermore, methane plume emissions can be accurately quantified through the utilization of an integrated mass enhancement model. Finally, a prediction of the future trajectory of methane remote sensing satellites is presented, in consideration of the current landscape. This paper aims to provide basic theoretical support for subsequent scientific research.
- Open Access
- 5 May 2023
- Published by MDPI AG in Remote Sensing
- Vol. 15 (9) , 2431
Activities to Promote the Moon as an Absolute Calibration Reference
The accuracy and consistency of Earth observation (EO) instrument radiometric calibration is a fundamental prerequisite for achieving accurate results and delivering reliable predictions. Frequent calibration and validation (Cal/Val) activities are needed during the instrument’s lifetime, and this procedure is often extended to historical archives. Numerous satellites in orbit and proposed future missions have incorporated lunar observation into their vicarious calibration components over recent years, facilitated by the extreme long-term photometric stability of the Moon. Since the birth of the first lunar calibration reference model, lunar-dependent calibration techniques have developed rapidly, and the application and refinement of the lunar radiometric model have become a welcome research focus in the calibration community. Within the context of the development of lunar observation activities and calibration systems globally, we provide a comprehensive review of the activities and results spawned by treating the Moon as a reference for instrument response and categorize them against the understanding of lunar radiometric reference. In general, this appears to be a process of moving from data to instruments, then back into data, working towards a stated goal. Here we highlight lunar radiometric models developed by different institutions or agencies over the last two decades while reporting on the known limitations of these solutions, with unresolved challenges remaining and multiple lunar observation plans and concepts attempting to address them from various perspectives, presenting a temporal development. We also observe that the methods seeking uncertainty reduction at this stage are rather homogeneous, lacking the combination of approaches or results from lunar surface studies conducted by many spacecraft missions, and joint deep learning methods to extract information. The factors that influence the accuracy of the measurement irradiance may be regulated when practical models arrive. As a central element in lunar calibration, the development of an absolute radiometric datum helps to better understand the Earth system.
- 5 May 2023
- Published by MDPI AG in Remote Sensing
- Vol. 15 (9) , 2431
Open AccessActivities to Promote the Moon as an Absolute Calibration Reference
The accuracy and consistency of Earth observation (EO) instrument radiometric calibration is a fundamental prerequisite for achieving accurate results and delivering reliable predictions. Frequent calibration and validation (Cal/Val) activities are needed during the instrument’s lifetime, and this procedure is often extended to historical archives. Numerous satellites in orbit and proposed future missions have incorporated lunar observation into their vicarious calibration components over recent years, facilitated by the extreme long-term photometric stability of the Moon. Since the birth of the first lunar calibration reference model, lunar-dependent calibration techniques have developed rapidly, and the application and refinement of the lunar radiometric model have become a welcome research focus in the calibration community. Within the context of the development of lunar observation activities and calibration systems globally, we provide a comprehensive review of the activities and results spawned by treating the Moon as a reference for instrument response and categorize them against the understanding of lunar radiometric reference. In general, this appears to be a process of moving from data to instruments, then back into data, working towards a stated goal. Here we highlight lunar radiometric models developed by different institutions or agencies over the last two decades while reporting on the known limitations of these solutions, with unresolved challenges remaining and multiple lunar observation plans and concepts attempting to address them from various perspectives, presenting a temporal development. We also observe that the methods seeking uncertainty reduction at this stage are rather homogeneous, lacking the combination of approaches or results from lunar surface studies conducted by many spacecraft missions, and joint deep learning methods to extract information. The factors that influence the accuracy of the measurement irradiance may be regulated when practical models arrive. As a central element in lunar calibration, the development of an absolute radiometric datum helps to better understand the Earth system.
- Open Access
- 20 February 2023
- Published by MDPI AG in Remote Sensing
- Vol. 15 (4) , 1141
Developing a near Real-Time Cloud Cover Retrieval Algorithm Using Geostationary Satellite Observations for Photovoltaic Plants
Clouds can block solar radiation from reaching the surface, so timely and effective cloud cover test and forecasting is critical to the operation and economic efficiency of photovoltaic (PV) plants. Traditional cloud cover algorithms based on meteorological satellite observation require many auxiliary data and computing resources, which are hard to implement or transplant for applications at PV plants. In this study, a portable and fast cloud mask algorithm (FCMA) is developed to provide near real-time (NRT) spatial-temporally matched cloud cover products for PV plants. The geostationary satellite imager data from the Advanced Himawari Imager aboard Himawari-8 and the related operational cloud mask algorithm (OCMA) are employed as benchmarks for comparison and validation. Furthermore, the ground-based manually observed cloud cover data at seven quintessential stations at 08:00 and 14:00 BJT (Beijing Time) in 2017 are employed to verify the accuracy of cloud cover data derived from FCMA and OCMA. The results show a high consistency with the ground-based data, and the average correlation coefficient (R) is close to 0.85. Remarkably, the detection accuracy of FCMA is slightly higher than that of OCMA, demonstrating the feasibility of FCMA for providing NRT cloud cover at PV plants.
- 20 February 2023
- Published by MDPI AG in Remote Sensing
- Vol. 15 (4) , 1141
Open AccessDeveloping a near Real-Time Cloud Cover Retrieval Algorithm Using Geostationary Satellite Observations for Photovoltaic Plants
Clouds can block solar radiation from reaching the surface, so timely and effective cloud cover test and forecasting is critical to the operation and economic efficiency of photovoltaic (PV) plants. Traditional cloud cover algorithms based on meteorological satellite observation require many auxiliary data and computing resources, which are hard to implement or transplant for applications at PV plants. In this study, a portable and fast cloud mask algorithm (FCMA) is developed to provide near real-time (NRT) spatial-temporally matched cloud cover products for PV plants. The geostationary satellite imager data from the Advanced Himawari Imager aboard Himawari-8 and the related operational cloud mask algorithm (OCMA) are employed as benchmarks for comparison and validation. Furthermore, the ground-based manually observed cloud cover data at seven quintessential stations at 08:00 and 14:00 BJT (Beijing Time) in 2017 are employed to verify the accuracy of cloud cover data derived from FCMA and OCMA. The results show a high consistency with the ground-based data, and the average correlation coefficient (R) is close to 0.85. Remarkably, the detection accuracy of FCMA is slightly higher than that of OCMA, demonstrating the feasibility of FCMA for providing NRT cloud cover at PV plants.
- Open Access
- 31 December 2022
- Published by MDPI AG in Remote Sensing
- Vol. 15 (1) , 227
PrecipGradeNet: A New Paradigm and Model for Precipitation Retrieval with Grading of Precipitation Intensity
Near-real-time precipitation retrieval plays an important role in the study of the evolutionary process of precipitation and the prevention of disasters caused by heavy precipitation. Compared with ground-based precipitation observations, the infrared precipitation estimations from geostationary satellites have great advantages in terms of geographical coverage and temporal resolution. However, precipitation retrieved from multispectral infrared data still faces challenges in terms of accuracy, especially in extreme cases. In this paper, we propose a new paradigm for satellite multispectral infrared data retrieval of precipitation and construct a new model called PrecipGradeNet. This model uses FY-4A L1 FDI data as the input, IMERG precipitation data as the training target, and improves the precipitation retrieval accuracy by grading the precipitation intensity through Res-UNet, a semantic segmentation network. To evaluate the precipitation retrieval of the model, we compare the retrieval results with the FY-4A L2 QPE operational product to the IMERG precipitation. IMERG is considered as the ground truth. We evaluate the precipitation retrieval from the precipitation fall area identification, the precipitation intensity interval discrimination, and the precipitation quantification. Experimental results show that PrecipGradeNet has better overall performance compared with the FY-4A QPE product in precipitation fall area identification with POD increased by 48% and CSI and HSS improved by 21% and 14%. PrecipGradeNet also has better performance in light precipitation with POD increased by 114% and CSI and HSS improved by 64% and 52%, and better overall precipitation quantification, with RMSE and CC improved by 16% and 15%. In addition, PrecipGradeNet avoids the overall bias in the low and extreme high precipitation cases. Therefore, the new paradigm proposed in this paper has the potential to improve the retrieval accuracy of satellite precipitation estimation products. This study suggests that the application of semantic segmentation methods may provide a new path to correct the intensity bias of the satellite-based precipitation products.
- 31 December 2022
- Published by MDPI AG in Remote Sensing
- Vol. 15 (1) , 227
Open AccessPrecipGradeNet: A New Paradigm and Model for Precipitation Retrieval with Grading of Precipitation Intensity
Near-real-time precipitation retrieval plays an important role in the study of the evolutionary process of precipitation and the prevention of disasters caused by heavy precipitation. Compared with ground-based precipitation observations, the infrared precipitation estimations from geostationary satellites have great advantages in terms of geographical coverage and temporal resolution. However, precipitation retrieved from multispectral infrared data still faces challenges in terms of accuracy, especially in extreme cases. In this paper, we propose a new paradigm for satellite multispectral infrared data retrieval of precipitation and construct a new model called PrecipGradeNet. This model uses FY-4A L1 FDI data as the input, IMERG precipitation data as the training target, and improves the precipitation retrieval accuracy by grading the precipitation intensity through Res-UNet, a semantic segmentation network. To evaluate the precipitation retrieval of the model, we compare the retrieval results with the FY-4A L2 QPE operational product to the IMERG precipitation. IMERG is considered as the ground truth. We evaluate the precipitation retrieval from the precipitation fall area identification, the precipitation intensity interval discrimination, and the precipitation quantification. Experimental results show that PrecipGradeNet has better overall performance compared with the FY-4A QPE product in precipitation fall area identification with POD increased by 48% and CSI and HSS improved by 21% and 14%. PrecipGradeNet also has better performance in light precipitation with POD increased by 114% and CSI and HSS improved by 64% and 52%, and better overall precipitation quantification, with RMSE and CC improved by 16% and 15%. In addition, PrecipGradeNet avoids the overall bias in the low and extreme high precipitation cases. Therefore, the new paradigm proposed in this paper has the potential to improve the retrieval accuracy of satellite precipitation estimation products. This study suggests that the application of semantic segmentation methods may provide a new path to correct the intensity bias of the satellite-based precipitation products.
- Open Access
- 16 September 2022
- Published by MDPI AG in Remote Sensing
- Vol. 14 (18) , 4620
Study on the Impact of the Doppler Shift for CO2 Lidar Remote Sensing
Atmospheric carbon dioxide (CO2) is recognized as the most important component of the greenhouse gases, the concentration of which has increased rapidly since the pre-industrial era due to anthropogenic emissions of greenhouse gases (GHG). The accurate monitoring of carbon dioxide is essential to study the global carbon cycle and radiation budget on Earth. The Aerosol and Carbon Detection Lidar (ACDL) instrument onboard the Atmospheric Environmental Monitoring Satellite (AEMS) was successfully launched in April 2022, which allows a new perspective to quantify the global spatial distribution of atmospheric CO2 with high accuracy. In this work, the impact of the Doppler shift on CO2 measurements for an integrated-path differential absorption (IPDA) light detection and ranging (lidar) system was evaluated to meet the weighted column-averaged mixing ratio of carbon dioxide (XCO2) measurement requirements of less than one part per million (ppm). The measurement uncertainties due to the Doppler shift were first evaluated in airborne IPDA observations. The result shows that most of the Doppler shift is in the range of 6–8 MHz, resulting in 0.26-0.39 ppm deviations in the XCO2 results. The deviations between the XCO2 retrievals and in situ measurements decreased to 0.16 ppm after the correction of the Doppler shift from 11:28:29 to 11:28:49 in the flight campaign. In addition, the online Doppler shift accounts for 98% of the deviations between XCO2 retrievals and in situ measurements. Furthermore, the impact of the Doppler shift on ACDL measurements is also assessed. The differences between the XCO2 retrievals with and without Doppler shift are used to quantify measurement uncertainties due to the Doppler effect. The simulations reveal that a pointing misalignment of 0.067 mrad can lead to a mean bias of about 0.30 ppm (0.072%) in the CO2 column. In addition, CO2 measurements are more sensitive to the Doppler shift at high altitudes for IPDA lidar, so the largest differences in the CO2 columns are found on the Qinghai–Tibet Plateau in China.
- 16 September 2022
- Published by MDPI AG in Remote Sensing
- Vol. 14 (18) , 4620
Open AccessStudy on the Impact of the Doppler Shift for CO2 Lidar Remote Sensing
Atmospheric carbon dioxide (CO2) is recognized as the most important component of the greenhouse gases, the concentration of which has increased rapidly since the pre-industrial era due to anthropogenic emissions of greenhouse gases (GHG). The accurate monitoring of carbon dioxide is essential to study the global carbon cycle and radiation budget on Earth. The Aerosol and Carbon Detection Lidar (ACDL) instrument onboard the Atmospheric Environmental Monitoring Satellite (AEMS) was successfully launched in April 2022, which allows a new perspective to quantify the global spatial distribution of atmospheric CO2 with high accuracy. In this work, the impact of the Doppler shift on CO2 measurements for an integrated-path differential absorption (IPDA) light detection and ranging (lidar) system was evaluated to meet the weighted column-averaged mixing ratio of carbon dioxide (XCO2) measurement requirements of less than one part per million (ppm). The measurement uncertainties due to the Doppler shift were first evaluated in airborne IPDA observations. The result shows that most of the Doppler shift is in the range of 6–8 MHz, resulting in 0.26-0.39 ppm deviations in the XCO2 results. The deviations between the XCO2 retrievals and in situ measurements decreased to 0.16 ppm after the correction of the Doppler shift from 11:28:29 to 11:28:49 in the flight campaign. In addition, the online Doppler shift accounts for 98% of the deviations between XCO2 retrievals and in situ measurements. Furthermore, the impact of the Doppler shift on ACDL measurements is also assessed. The differences between the XCO2 retrievals with and without Doppler shift are used to quantify measurement uncertainties due to the Doppler effect. The simulations reveal that a pointing misalignment of 0.067 mrad can lead to a mean bias of about 0.30 ppm (0.072%) in the CO2 column. In addition, CO2 measurements are more sensitive to the Doppler shift at high altitudes for IPDA lidar, so the largest differences in the CO2 columns are found on the Qinghai–Tibet Plateau in China.